DYNAPAC scc122c-2en.pdf

289
DYNAPAC SPARE PARTS CATALOGUE Box 504, SE-371 23 Karlskrona, Sweden Phone: +46 455 30 60 00, Fax: +46 455 30 60 10 www.dynapac.com CC122C SCC122C-2EN3

Transcript of DYNAPAC scc122c-2en.pdf

  • DYNAPAC

    SPARE PARTSCATALOGUE

    Box 504, SE-371 23 Karlskrona, Sweden

    Phone: +46 455 30 60 00, Fax: +46 455 30 60 10

    www.dynapac.com

    CC122C

    SCC122C-2EN3

  • Spare Parts Catalogue

    We reserve the right to change specifications without notice.Printed in Sweden.

    Published catalogue issues valid for these rollers:Catalogue Issue date Valid for serial numbers

    I

    Valid from roller serial number:

    Diesel engines:

    SCC122C-2EN3

    Vibratory Combination RollerCC122C

    SCC122C-2EN1 2004-01 Replaced by SCC122C-2EN2SCC122C-2EN2 2005-03 Replaced by SCC122C-2EN3SCC122C-2EN3 2006-07 See above

    DEUTZ F2L 2011ISUZU 3LD1 PW-05

    *60117500* - *60118677* CC122C DEUTZ*60127500* - *60118677* CC122C ISUZU

  • ORDERING SPARE PARTSTo avoid errors in delivery, please give the followinginformation when ordering spare parts:1. Type of machine.2. Roller serial number.3. Quantity required.4. Part number.5. Parts denomination.6. Dimensions when ordering per length.

    RESERVDELSBESTLLNINGFljande uppgifter ska lmnas vid bestllning av reserv-delar fr att undvika leveransfel:1. Maskintyp.2. Vltens serienummer.3. Antal av nskad reservdel.4. Reserdelens artikelnummer.5. Reservdelens benmning.6. Mttuppgifter vid bestllning av metervara.

    ERSATZTEILBESTELLUNGZur Vermeidung von Fehllieferungen sind bei der Bestel-lung von Ersatzteilen folgende Angaben zu machen:1. Maschinentyp.2. Herstellungsnummer.3. Bestellmenge. (Quantity)4. Ersatzteilnummer. (Part N)5. Ersatzteilbenennung. (Denomination)6. Massangaben bei Bestellung von Meterware.

    ORDINI DI RICAMBIPer evitare errori nelle consegne di ricambi, Vi preghiamodi comunicarci le seguenti informazioni al momento dell'ordinazione:1. Tipo di macchina.2. Numero di serie della macchina.3. Quantit dei pezzi desiderati. (Quantity)4. Numero di codice del pezzo. (Part N)5. Descrizione del pezzo di ricambio. (Denomination)6. Misura, in caso di ordine per metro.

    PEDIDO DE RECAMBIOSPara evitar errores en las entregas, debern indicarse lossiguientes datos al hacer un pedido de recambios:1. Tipo de mquina.2. Nmero de serie.3. Cantidad de piezas deseadas. (Quantity)4. Nmero de artculo de la pieza de recambio. (Part N)5. Denominacin de la pieza. (Denomination)6. Indquese la medida al solicitar un artculo que se

    expide por metros.

    COMMANDE DE PIECES DE RECHANGELes indications suivantes doivent tre fournies lors de lacommande de pices de rechange, afin d'viter toute erreurde livraison:1. Type de machine.2. Numro de srie.3. Quantit dsire de pice de rechange. (Quantity)4. Numro de la pice de rechange. (Part N)5. Dnomination de la pice de rechange. (Denomination)6. Longueur en cas de commande au mtre.

    YOUR AGENT/DEALER:

    II

  • III

    Notes

    GROUP PAGE NOTESPARTS SERVICEINFO INFO

    Changes

    31

    1

    Text pagesThe text pages is structured as thepicture on the right.1. This is the remarks forspecific items and the descriptionsof the remarks is at the bottom ofthe parts list.2. Parts indicated by a dot andmoved to the right are includedwhen buying the assembled unitabove.3. Spare parts and service codefor a specific part, mainly forinternal use at Dynapac. "A" =Service part, "B" = Fast movingpart, "C" = Suggested exchangedpart and "D" = Regular spare part.

    2

  • Notes

    IV

  • CatalogueValid from serial number:

    1.

    PRMETIKETTFr att undvika fel vid reservdelsbestllning finns hrnedan tv etiketter som passar i fickorna p prmarnasryggar. P dessa kan man se frn vilket vltnummer avaktuell maskin reservdelskatalogen gller. Gr s hr:1. Tag denna sida ur prmen.2. Klipp ut etiketten till VNSTER (1) och stt in den i

    fickan p DENNA prmens rygg.3. Finns det en etikett till HGER (2), kan denna an-

    vndas p prmen fr FREGENDE utgva avdenna katalog.

    4. Kasta detta papper.

    BINDER LABELTo avoid errors when ordering spare parts use the labelsbelow to identify the catalogues on the back of thebinder. The label contain the serial number range forwhich the catalogue is valid. Do like this:1. Remove this page from the binder.2. Cut out the LEFT label (1) and put it on THIS binders

    back.3. If there is a label to the RIGHT (2), it can be used on

    thebinder for PRECEDING issue of this catalogue.4. Throw away this paper.

    KATALOG-BESCHRIFTUNGZur Vermeidung von Fehlen bei der Ersatzteilbestellungbenutzen Sie bitte die unteren Beschriftungen, um dieKataloge auf der Rckseite zu kennzeichen. Auf derBeschriftung ist angegaben, fr welcheMaschinennummern der jeweilige Katalog gltig ist.Ablauf:1. Nehmen Sie dieses Blatt aus dem Katalog.2. Schneiden Sie die LINKE Beschriftung (1) aus. Schie-

    ben Sie die Beschriftung in die tasche auf DEMKatalogrcke.

    3. Sollte die Beschriftung unten RECHTS (2) mitgeliefertwerden, kennzeichen Sie damit bitte die LTEREAusfhrung dieses Kataloges.

    4. Den Rest dieses Blattes bitte vernichten.

    ETICHETTA POSTA SUL RACCOGLITOREPer evitare errori quando ordinate pezzi di ricambio, usatele etichette in calce che servono ad identificare i cataloghisul retro del raccoglitore. L'etichetta indica il numero dimatricola delle maccine prese in considerazione nel catalo-go.1. Rimuovete questa pagina dal raccoglitore.2. Ritagliate l'etichetta posta a SINISTRA (1) e ponetela

    sul retro DEL raccoglitore.3. Se trovate anche un'etichetta sulla DESTRA (2),

    ritagliatela e ponetela sul raccoglitore relativo allaPRECEDENTE edizione del catalogo.

    4. Distruggete questo foglio.

    ETIQUETAGE DU CATALOGUEAfin d'viter des erreurs lors de commandes de pices derechange, nous vous conseillons d'apposer les marquagesci-dessous l'arrire du classeur, pour identifier les catalo-gues. Ce marquage indique les numros de srie pourlesquels le catalogue est adapt. Il convient de procder dela faon suivante:1. Retirez cette page du classeur.2. Dcoupez l'tiquette de GAUCHE (1), et apposez-la

    l'arrire de CE catalogue.3. Si il y a une tiquette DROITE (2), vous pourrez

    l'apposer sur le classeur de l'edition PRECEDENTE ducatalogue.

    4. Dtruire cetta feuille.

    ETIQUETA PARA LA CARPETAPara evitar errores al pedir repuestos utilicen las etiquetasabajo descritas para identificar los catlogos en la partetrasera de la carpeta. En la etiqueta se ven los nmerosde referencia de la serie para la cual es vlido el catlogo.Instrucciones:1. Quitar esta pgina de la carpeta.2. Corta la etiqueta IZQUIERDA (1) y ponerla est ESTA

    carpeta en la parte trasera.3. Si hay una etiqueta en la parte DERECHA (2) se puede

    utilizar en la carpeta para el catlogo que PRECEDE aesta.

    4. Tirar esta hoja.

    V

    SCC122C-2EN3

    *601x7500* - *601x8677*

    CC122C

  • TC 1

    TABLE OF CONTENTS PageDynapac Compaction Equipment AB

    CC122C SN 601X7500 - 601X8677 2

    Service kits 4Service kits 6Service kit, Deutz F2L 1011F/2011, F3L 2011 50 h938542 8Service kit, Isuzu 50 h938539 10Service kit, Deutz F2L 1011F/2011, F3L 2011 500 h938543 12Service kit, Isuzu 500 h938540 14Service kit, Deutz F2L 1011F/2011 1000 h938544 16Service kit, Isuzu 1000 h938541 18

    Repair kits 20Repair kits 22Eccentric shaft kit938908 24Drum rotation kit938892 26Scraper kit CC122/132 - (12 mm)938914 28Shock absorber kit, drum938885 30

    Frame 32Frames 34Scrapers, standard drum Up to 601X7649 36Scrapers, STD From 601X7650 Up to 601X9029 38Scrapers, STD From 601X9030 40Scrapers, spring loaded, front drum Up to 601X7649 42Scrapers, spring loaded From 601X7650 44Scrapers, wheels 46Steering hitch 48Structure DEUTZ, F2L Up to 601X8206 50Structure DEUTZ, F2L From 601X8207 54Structure ISUZU 58Sprinkler system Front tank 62Sprinkler, front/rear Up to 601X7649 64Sprinkler, front/rear From 601X7650 68

    Drum 70Drum 72Wheels 74

    Engine 76Engine DEUTZ F2L 2011 78Engine ISUZU 3LD1 PW-05 82Cooling system ISUZU 84Intake system DEUTZ 86Intake system ISUZU 88Fuel system DEUTZ 90Fuel system ISUZU 92Exhaust system DEUTZ 94Exhaust system ISUZU 96

    Hydraulic system 98Hydraulic diagram 100Propulsion system DEUTZ, ISUZU 102Hydraulic pump, propulsion372352 106Rotating group, valves, charge pump 108Control unit, cpl 110

  • TC 2

    TABLE OF CONTENTS PageDynapac Compaction Equipment AB

    Hydraulic motor, propulsion, drum375631 112Hydraulic motor, propulsion375632 114Junction block380736 116Vibration system DEUTZ 118Vibration system ISUZU 120Hydraulic pump, vibration DEUTZ359524 124Hydraulic pump, vibration ISUZU375649 126Vibration valve ISUZU370173 128Steering system Up to 601X7956 130Steering system From 601X7957 Up to 601X8939 132Steering system From 601X8940 134Steering valve902099 136Steering cylinder374603 138Brake system DEUTZ / ISUZU 140

    Electrical equipment 142Electrical equipment DEUTZ Up to 601X7525 144Electrical equipment DEUTZ From 601X7526 148Electrical equipment ISUZU 152Control panel 156Electric battery switch DEUTZ 160Interlock 162Interlock Loxam From 601X8311 164Sprinkler timer 166Driving & side direction lights Up to 601X7576 168Driving & side direction lights From 601X7577 172Working lights 176Licence plate light, parking lights 178Rotating beacon 180

    Drivers platform 182Drivers platform 184Control panel 186Arm rests, seat belt, laterally adjusting 188Comfort drivers seat, laterally adjusting and seat belt 190Bench 192Engine and forward/reverse controls DEUTZ 194Engine and forward/reverse controls ISUZU 196F/r controls dual, control panel mounted 198F/r control dual left side, platform mounted 200Rops and fops 202

    Decals 204Plates and decals, ce-marking approved 206

    Standard equipment 210Standard equipment 212

    Optional equipment 214Cab, exterior Up to 601X8560 216Cab, interior Up to 601X8560 222Cab, heater Up to 601X8560 224Canopy 226SMV sign 228Tool equipment 230Noise suppression DEUTZ , 78 dB Up to 601X8206 232Noise suppression DEUTZ , 78 dB From 601X8207 234

  • TC 3

    TABLE OF CONTENTS PageDynapac Compaction Equipment AB

    Noise suppression DEUTZ , 73 dB Up to 601X8206 236Noise suppression DEUTZ , 73 dB From 601X8207 238Noise suppression ISUZU 240Back-up alarm 242Rear mirror 244Combination water supply 246Combination water supply 2 rear sprinkler pipes 248Brake release, propulsion motor 250Cassette receiver 252Towing valve 254Flow divider 256Vibration shut-off, front drum DEUTZ 258Vibration shut-off, front drum ISUZU 260Automatic vibration control 262Service brake 264Driving, restriction 266Bio-hydraulic oil lock Old design 268

  • 2

    CC122C SN 601X7500 - 601X8677

    CC122120

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 3

    CC122C SN 601X7500 - 601X8677

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.Service kits ( Page 4 )Repair kits ( Page 20 )

    10 Frame ( Page 32 )20 Drum ( Page 70 )30 Engine ( Page 76 )50 Hydraulic system ( Page 98 )60 Electrical equipment ( Page 142 )70 Drivers platform ( Page 182 )80 Decals ( Page 204 )90 Standard equipment ( Page 210 )91 Optional equipment ( Page 214 )

  • 4

    Service kits

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 5

    Service kits

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.Service kits ( Page 6 )

    1 938542 Service kit, Deutz F2L 1011F/2011, F3L 2011 50 h ( Page 8 )938539 Service kit, Isuzu 50 h ( Page 10 )

    2 938543 Service kit, Deutz F2L 1011F/2011, F3L 2011 500 h ( Page 12 )938540 Service kit, Isuzu 500 h ( Page 14 )

    3 938544 Service kit, Deutz F2L 1011F/2011 1000 h ( Page 16 )938541 Service kit, Isuzu 1000 h ( Page 18 )

  • 6

    Service kits

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 7

    Service kits

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 938542 Service kit, Deutz F2L 1011F/2011, F3L 2011 50 h ( Page 8 )

    938539 Service kit, Isuzu 50 h ( Page 10 )2 938543 Service kit, Deutz F2L 1011F/2011, F3L 2011 500 h ( Page 12 )

    938540 Service kit, Isuzu 500 h ( Page 14 )3 938544 Service kit, Deutz F2L 1011F/2011 1000 h ( Page 16 )

    938541 Service kit, Isuzu 1000 h ( Page 18 )

  • 8

    938542 Service kit, Deutz F2L 1011F/2011, F3L 2011 50 h

    17423

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 9

    938542 Service kit, Deutz F2L 1011F/2011, F3L 2011 50 h

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 939515 Oil filter13 903938 Fuel filter14 929322 Fuel strainer15 903247 Filter element1

  • 10

    938539 Service kit, Isuzu 50 h

    17423

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 11

    938539 Service kit, Isuzu 50 h

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 908404 Oil filter13 908405 Fuel filter15 903247 Filter element1

  • 12

    938543 Service kit, Deutz F2L 1011F/2011, F3L 2011 500 h

    17423

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 13

    938543 Service kit, Deutz F2L 1011F/2011, F3L 2011 500 h

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 939515 Oil filter1

  • 14

    938540 Service kit, Isuzu 500 h

    17423

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 15

    938540 Service kit, Isuzu 500 h

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 908404 Oil filter13 908405 Fuel filter1

  • 16

    938544 Service kit, Deutz F2L 1011F/2011 1000 h

    17423

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 17

    938544 Service kit, Deutz F2L 1011F/2011 1000 h

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 939515 Oil filter13 903938 Fuel filter14 929322 Fuel strainer15 903247 Filter element17 357138 Ventilating filter18 380295 Main filter19 380294 Safety filter1

    10 938584 Valve cover gasket1

  • 18

    938541 Service kit, Isuzu 1000 h

    17423

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 19

    938541 Service kit, Isuzu 1000 h

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 908404 Oil filter13 908405 Fuel filter15 903247 Filter element17 357138 Ventilating filter18 380295 Main filter19 380294 Safety filter1

    10 938581 Valve cover gasket1

  • 20

    Repair kits

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 21

    Repair kits

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.Repair kits ( Page 22 )

    1 938908 Eccentric shaft kit ( Page 24 )12 938892 Drum rotation kit ( Page 26 )13 938914 Scraper kit CC122/132 - (12 mm) ( Page 28 )4 938885 Shock absorber kit, drum ( Page 30 )1

  • 22

    Repair kits

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 23

    Repair kits

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 938908 Eccentric shaft kit ( Page 24 )12 938892 Drum rotation kit ( Page 26 )13 938914 Scraper kit CC122/132 - (12 mm) ( Page 28 )4 938885 Shock absorber kit, drum ( Page 30 )1

  • 24

    938908 Eccentric shaft kit

    938908

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 25

    938908 Eccentric shaft kit

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 160132 O-ring 124, 50x3, 0012 163049 Sealing13 923951 O-ring24 904258 Spherical roller bearing2

  • 26

    938892 Drum rotation kit

    938892

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 27

    938892 Drum rotation kit

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 160132 O-ring 124, 50x3, 0012 111018 Ball bearing13 163049 Sealing1

  • 28

    938914 Scraper kit CC122/132 - (12 mm)

    SCRAPER

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 29

    938914 Scraper kit CC122/132 - (12 mm)

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 385675 Scraper4

  • 30

    938885 Shock absorber kit, drum

    SHOCK ABSORB.

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 31

    938885 Shock absorber kit, drum

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 345215 Shock absorber8

  • 32

    Frame

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 33

    Frame

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.150 Frames ( Page 34 )200 Scrapers, standard drum Up to 601X7649 ( Page 36 )220 Scrapers, STD From 601X7650 Up to 601X9029 ( Page 38 )230 Scrapers, STD From 601X9030 ( Page 40 )250 Scrapers, spring loaded, front drum Up to 601X7649 ( Page 42 )260 Scrapers, spring loaded From 601X7650 ( Page 44 )275 Scrapers, wheels ( Page 46 )300 Steering hitch ( Page 48 )410 Structure DEUTZ, F2L Up to 601X8206 ( Page 50 )420 Structure DEUTZ, F2L From 601X8207 ( Page 54 )450 Structure ISUZU ( Page 58 )565 Sprinkler system Front tank ( Page 62 )570 Sprinkler, front/rear Up to 601X7649 ( Page 64 )580 Sprinkler, front/rear From 601X7650 ( Page 68 )

  • 34

    Frames

    15510-4

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 35

    Frames

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 357190 Frame, rear12 357120 Frame, front13 Steering hitch ( Page 48 )14 357235 Fork15 357236 Fork16 357218 F Spacer block4

    357216 G Spacer block27 357222 Shim T=1 mmN8 357221 Shim T=3 mmN9 357486 Shaft1

    10 357488 Spring111 343775 Wire212 357483 Hair pin113 902171 A Clamp214 902172 Cover plate215 500016 Screw M6-1,0x55 8,8416 600004 Washer217 615076 Washer 7,0x25x1,5218 902100 Screw419 904232 Washer 17x30x33220 927396 Screw421 500094 F Screw12

    923247 G Screw1222 500030 Screw M10-1,5x35H 8,81223 379179 H Holder624 904230 Washer 10,5x22x21225 373628 C Cover226 500053 Screw M8-1,25x20 8,81227 904229 Washer 8,4x16x1,51228 902101 Screw4

    508065 F Screw429 Shock absorber See group 20830 357693 Engine bracket131 904231 Washer 13x24x2632 358743 D Towing device133 947687 E Screw M12-1,75x30 10,9634 358861 E Mirror bracket135 500188 E Screw M8-1,25x14 8,8136 373999 E Rod1

    A) 2 pcsC) New, reinforcedD) Option, frontE) OptionF) RearG) FrontH) Replaces earlier used Lock nut 586018; each holder has two

    nuts

  • 36

    Scrapers, standard drum

    18100

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 37

    Scrapers, standard drum

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 374018 Scraper bracket22 358588 Scraper bracket24 Not used on this model5 385675 Scraper26 500049 Screw M12-1,75x60 8.827 904231 Washer 13x24x2188 586019 Lock nut M12129 500046 Screw M12x30H 8,8 FZB2

    10 Not used on this model11 500056 Screw M12x45 8,8212 Not used on this model14 904342 Screw M12x451015 385672 Scraper bracket216 385674 Scraper bracket217 904213 Washer 13x30x4618 384493 Spacer sleeve219 904343 Screw2

  • 38

    Scrapers, STD

    18146

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 39

    Scrapers, STD

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 376624 Scraper bracket22 358588 Scraper bracket25 385675 Scraper26 500046 Screw M12x30H 8,8 FZB2

    10 586019 Lock nut M12511 791963 Lock nut M12918 500056 Screw M12x45 8,8739 904231 Washer 13x24x22140 385672 Scraper bracket141 385674 Scraper bracket142 904703 Washer 13x24x4243 384493 Spacer sleeve244 904342 Screw M12x45545 904424 Screw M12x55446 389148 Sprinkler pipe/bracket147 377795 Scraper bracket1

  • 40

    Scrapers, STD

    18352

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 41

    Scrapers, STD

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 376624 Scraper bracket22 358588 Scraper bracket25 385675 Scraper26 500046 Screw M12x30H 8,8 FZB2

    10 586019 Lock nut M12511 791963 Lock nut M12918 500056 Screw M12x45 8,8739 904231 Washer 13x24x22140 385672 Scraper bracket141 385674 Scraper bracket142 904703 Washer 13x24x4243 384493 Spacer sleeve244 904342 Screw M12x45545 904424 Screw M12x55446 389148 Sprinkler pipe/bracket147 377795 Scraper bracket1

  • 42

    Scrapers, spring loaded, front drum

    17790-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 43

    Scrapers, spring loaded, front drum

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 387806 Scraper bracket22 387807 Scraper bracket23 387808 Scraper bracket24 387809 Scraper bracket25 358874 Stop26 385613 Hook28 358876 Spring49 380255 Screw2

    10 500015 Screw M6-1x30 8,8211 500047 Screw M8-1,25x35 8,8212 500046 Screw M12x30H 8,8 FZB213 500133 Screw M12x70214 904228 Washer 6,4x12x1,5415 904229 Washer 8,4x16x1,5416 904230 Washer 10,5x22x2417 904231 Washer 13x24x2418 904703 Washer 13x24x4219 586002 Lock nut M6220 791182 Lock nut M8221 586018 Lock nut M10222 586019 Lock nut M12223 791082 Screw M10x60224 570006 Nut M10225 904241 Screw M8x40226 570005 Nut M8240 385674 Scraper bracket241 385672 Scraper bracket242 385675 Scraper243 384493 Spacer sleeve244 500056 Screw M12x45 8,8246 904342 Screw M12x451047 904343 Screw248 904231 Washer 13x24x21449 904703 Washer 13x24x4450 586019 Lock nut M121452 500111 Screw M12x55 8,82

  • 44

    Scrapers, spring loaded

    18111

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 45

    Scrapers, spring loaded

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 389999 Scraper bracket22 D .Bracket13 D .Bracket14 D .Hook15 358876 .Spring16 904231 .Washer 13x24x247 500133 .Screw M12x7018 586019 .Lock nut M1219 904229 .Washer 8,4x16x1,52

    10 500047 .Screw M8-1,25x35 8,8111 791182 .Lock nut M8112 D .Stud113 902287 .Nut114 389998 Scraper bracket215 D .Bracket116 D,C .Bracket117 D .Stop118 358876 .Spring119 904230 .Washer 10,5x22x2220 380255 .Screw121 586018 .Lock nut M10122 904228 .Washer 6,4x12x1,5323 500015 .Screw M6-1x30 8,8124 586002 .Lock nut M6125 791082 .Screw M10x60126 570006 .Nut M10127 385674 Scraper bracket128 385675 Scraper229 385672 Scraper bracket130 389148 Sprinkler pipe/bracket131 904231 Washer 13x24x21732 904703 Washer 13x24x4433 500046 Screw M12x30H 8,8 FZB234 500056 Screw M12x45 8,8536 904342 Screw M12x45537 901330 Screw M12x50238 904424 Screw M12x55239 586019 Lock nut M12540 791963 Lock nut M12942 384493 B Spacer sleeve243 377795 Scraper bracket144 904231 B Washer 13x24x2246 500056 B Screw M12x45 8,82

    B) In use at front lower scraperC) Mounting hole to be used for item 37 depending on modelD) Not sold separately

  • 46

    Scrapers, wheels

    15848

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 47

    Scrapers, wheels

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 370800 Scraper bracket12 373938 Scraper blade Replaced by 35831143 500030 Screw M10-1,5x35H 8,8124 904230 Washer 10,5x22x285 357789 Scraper bracket46 586018 Lock nut M1087 500195 Screw M12-1,75x50 8.828 904703 Washer 13x24x449 904703 Washer 13x24x42

    10 358186 Scraper bracket211 586019 Lock nut M12212 904230 Washer 10,5x22x2413 358897 Lever114 925263 Spirol pin115 358898 Bracket216 500079 Screw M6-1x50 8,8117 904228 Washer 6,4x12x1,5118 586002 Lock nut M6119 513017 Screw M6x30H 10,94

  • 48

    Steering hitch

    15465-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 49

    Steering hitch

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 358976 Bearing housing12 358978 Hitch shaft13 357031 Bracket24 357038 Bracket15 357039 Shaft26 902063 Bushing17 902062 Bushing18 902061 Bushing29 902060 Lock nut1

    10 902059 Screw611 600008 Washer1412 926214 Grease fitting213 167044 A V-ring214 500028 Screw M10-1,5x25 8,8815 892179 O-ring116 357418 Sealing217 347153 Shim T=0,2 mmN18 347154 Shim T=0,4 mmN19 347155 Shim T=0,8 mmN20 Screw821 Washer822 902576 Cover2

    A) For improved function this replaces earlier used 160032

  • 50

    Structure DEUTZ, F2L

    16637-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 51

    Structure DEUTZ, F2L

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 374657 A Cover1

    904206 1 Screw4373476 1 Insulating washer4

    2 382565 J Cover13 374627 Grid14 357276 Hinge15 374625 Cooler frame16 357280 Hinge17 357248 Hood frame18 902256 Gas spring19 904368 Lock, outer1

    902866 Key Marked "455"110 374400 Holder plate111 358160 Bracket112 376129 Spacer113 900485 Screw214 904228 Washer 6,4x12x1,5215 586002 Lock nut M6216 374401 Spacer sleeve117 374402 Lever118 371380 Lock119 586001 Lock nut M5220 600003 Washer221 904374 Screw222 374403 Lock pin123 500059 Screw M6x10224 904639 Washer 6,7x14x1,5225 500021 Screw M8-1,25x25 8,8227 586003 Lock nut M8428 500053 Screw M8-1,25x20 8,81629 904640 Washer 8,4x22x32230 370645 Engine hood131 902166 C .Edge trim1XL32 357863 Shim T=2 mmN33 500249 Screw234 904229 Washer 8,4x16x1,5735 508027 Screw236 570005 Nut M8237 500029 Screw M10-1,5x30 8,8438 904557 Washer 10,5x22x4439 371994 Shim T=2 mmN40 904090 WasherN41 904091 WasherN42 900519 Plug343 902804 Plug444 202042 D Rubber strip1XL45 202046 E Rubber strip 25x101XL46 904076 F Edge trim1XL47 624018 Rivet1448 500047 Screw M8-1,25x35 8,8249 376866 G Cover1

    1) For absorbentA) RightC) L=3,680 mD) L=0,800 mE) L=0,850 mF) L=0,998 mG) LeftJ) New design has to be slightly modified to fit

  • 52

    Structure DEUTZ, F2L

    16637-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 53

    Structure DEUTZ, F2L

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.50 202028 H Edge trim1XL51 357866 Stop152 375594 Holder153 375595 Spacer154 904206 Screw255 500020 Screw M8-1,25x22 8,8456 500022 Screw M8-1,25x30 8,81

    H) L=0,457 m

  • 54

    Structure DEUTZ, F2L

    18349

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 55

    Structure DEUTZ, F2L

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 374657 A Cover Up to 601X91051

    391121 A Cover, cpl From 601X91061904206 K,J .Screw4373476 K,J .Insulating washer4

    2 382565 Cover13 374627 Grid Up to 601X91051

    391118 L Grid From 601X910614 357276 Hinge15 374625 Cooler frame16 357280 Hinge17 357248 Hood frame18 902256 Gas spring19 388846 Latch2

    10 387956 Stop plate211 508022 Screw M4x16812 904698 Washer 4,3x8x0,8413 923976 Nut414 377061 Lock plate115 388852 Lock plate116 791754 Blind rivet217 792180 Blind rivet318 904228 Washer 6,4x12x1,5525 500021 Screw M8-1,25x25 8,8227 586003 Lock nut M8228 500053 Screw M8-1,25x20 8,81629 904640 Washer 8,4x22x32030 377952 Engine hood131 902166 C .Edge trim1XL32 357863 Shim T=2 mmN33 500249 Screw234 904229 Washer 8,4x16x1,5735 508027 Screw236 570005 Nut M8237 500029 Screw M10-1,5x30 8,8438 904557 Washer 10,5x22x4439 371994 Shim T=2 mmN40 904090 WasherN41 904091 WasherN42 900519 Plug343 902804 Plug444 202042 D Rubber strip1XL45 202046 E Rubber strip 25x101XL46 904076 F Edge trim1XL47 624018 Rivet Up to 601X910514

    792210 Screw torx From 601X91061048 500047 Screw M8-1,25x35 8,8249 376866 G Cover150 202028 H Edge trim1XL51 357866 Stop152 375594 Holder153 375595 Spacer1

    A) RightC) L=3,680 mD) L=0,800 mE) L=0,850 mF) L=0,998 mG) LeftH) L=0,457 mJ) Not illustratedK) For absorbentL) Included in 391121, item 1

  • 56

    Structure DEUTZ, F2L

    18349

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 57

    Structure DEUTZ, F2L

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.54 904206 Screw255 500020 Screw M8-1,25x22 8,8456 500022 Screw M8-1,25x30 8,81

  • 58

    Structure ISUZU

    15751-3

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 59

    Structure ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 370647 A Cover12 382565 H Cover13 370646 Grid14 370638 Hinge15 202043 B Rubber strip1XL6 357280 Hinge17 Not used on this model8 902256 Gas spring19 902591 Lock, outer1

    903064 C Key Marked "624"110 358162 Bracket111 358160 Bracket112 500015 Screw M6-1x30 8,8213 904228 Washer 6,4x12x1,5414 904229 Washer 8,4x16x1,5715 904557 Washer 10,5x22x4416 500053 Screw M8-1,25x20 8,81417 371994 Shim T=2 mmN19 508027 Screw220 500249 Screw221 500029 Screw M10-1,5x30 8,8422 586003 Lock nut M8423 903369 Rivet1924 370645 Engine hood125 902166 D Edge trim1XL26 202028 E Edge trim1XL27 904640 Washer 8,4x22x32228 357863 Shim T=2 mmN29 Not used on this model30 370636 Plate131 370637 Cover132 357259 F Cover133 358161 Lever134 902585 Lock, inner135 902586 Lock pin136 586002 Lock nut M6437 500059 Screw M6x10238 904639 Washer 6,7x14x1,5639 Not used on this model40 570005 Nut M8241 900519 Plug342 903653 Plug443 357866 Stop144 500292 Screw M6x75445 370975 Gasket146 513012 Screw247 500059 Screw M6x10448 615042 Conical spring washer449 370627 Hood frame150 370637 Cover151 500079 Screw M6-1x50 8,8252 500292 Screw M6x75253 904229 Washer 8,4x16x1,52

    A) RightB) L=1,610 mC) Marked ``624``D) L=3,680 mE) L=0,457 mF) LeftH) New design has to be slightly modified to fit

  • 60

    Structure ISUZU

    15751-3

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 61

    Structure ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.54 374403 Lock pin155 374400 Holder plate156 371380 Lock157 904374 Screw258 904281 Washer 5,3x10x1259 586001 Lock nut M5260 904368 Lock, outer1

    902866 Key Marked "455"161 374401 Spacer sleeve162 374402 Lever163 904090 WasherN64 904091 WasherN65 376129 Spacer166 375594 Holder167 375595 Spacer168 904206 Screw269 500188 Screw M8-1,25x14 8,8270 500021 Screw M8-1,25x25 8,8271 500020 Screw M8-1,25x22 8,84

  • 62

    Sprinkler system Front tank

    17198

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 63

    Sprinkler system Front tank

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 904808 Water pump12 904877 Strainer cpl13 938307 .O-ring14 938306 .Strainer15 924986 Valve16 903886 Adapter27 357395 Holder plate18 926911 A Rubber strip1XL9 357142 Holder plate1

    10 382181 Holder plate111 382180 Holder plate112 500021 Screw M8-1,25x25 8,81313 904229 Washer 8,4x16x1,51314 901431 Hose connection115 923734 Hose connection216 924996 Hose connection317 925599 Valve218 901432 Hose connection119 924544 Hose connection220 923735 Hose connection221 313002 Hose clamp1622 903478 B Absorbent1XL23 202042 C Rubber strip1XL24 500028 Screw M10-1,5x25 8,8225 904230 Washer 10,5x22x2226 904878 D Hose reinforced2XL27 904878 D Hose reinforced1XL28 927568 Clamp229 358846 Strainer130 904878 E Hose reinforced3XL31 287713 Solenoid valve132 358809 Cable harness133 904878 C Hose reinforced1XL34 373797 Sprinkling tank135 359003 .Cap136 937053 .Plug, cpl137 ..Plug138 ..Gasket140 902916 .Adapter kit241 ..Pipe fitting142 ..Sealing143 ..Washer144 ..Nut145 500040 Screw M6-1x20 8,8246 904228 Washer 6,4x12x1,5347 357643 Wire148 615042 Conical spring washer349 615076 Washer 7,0x25x1,5250 586002 Lock nut M62

    A) L=0,430 mB) L=0,670 mC) Length as requiredD) L=0,300 mE) L=0,070 m

  • 64

    Sprinkler, front/rear

    17213

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 65

    Sprinkler, front/rear

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 904808 Water pump12 287726 Strainer cpl13 238535 .Gasket14 238536 .Strainer15 357813 Holder plate16 500021 Screw M8-1,25x25 8,847 904229 Washer 8,4x16x1,528 923984 Clamp29 929241 Connector1

    10 902105 Connector111 925599 Valve212 924996 Hose connection213 924544 Hose connection214 313002 Hose clamp1015 904878 A Hose reinforced2XL16 923734 Hose connection217 500053 Screw M8-1,25x20 8,8418 904229 Washer 8,4x16x1,51219 902286 Lock nut M8620 901432 Hose connection221 287713 Solenoid valve122 358809 Cable harness125 375745 B Sprinkling tank126 902268 .Cap127 902545 Seal ring128 202043 A Rubber strip4XL29 375805 Holder plate230 357819 Rubber cloth231 500028 Screw M10-1,5x25 8,8632 904230 Washer 10,5x22x2633 902379 A Edge trim2XL35 923683 Plug336 384300 B Sprinkler pipe138 382467 C Sprinkler pipe139 928781 Sprinkler, cpl440 923680 .Nozzle clamp141 923962 ..O-ring143 499444 .Strainer144 904116 .Gasket145 923679 .Nozzle1

    791117 1 .Nozzle body Orange146 923681 .Quick coupling, black147 928781 Sprinkler, cpl448 923680 .Nozzle clamp149 923962 ..O-ring150 499444 .Strainer151 904116 .Gasket152 923679 .Nozzle1

    791117 1 .Nozzle body Orange153 923681 .Quick coupling, black154 500016 Screw M6-1,0x55 8,8855 904228 Washer 6,4x12x1,5856 923859 Cover plate857 923876 D Clamp458 902285 Lock nut M6866 904904 A Rubber hose4XL

    1) Can replace PN 923679.A) Length as requiredB) RearC) FrontD) 2 pieces

  • 66

    Sprinkler, front/rear

    17213

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 67

    Sprinkler, front/rear

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.67 903959 Hose connection, cpl168 923680 .Nozzle clamp169 923962 ..O-ring170 904116 .Gasket171 903957 .Hose connection172 903958 .Coupling173 923684 Hose connection1

  • 68

    Sprinkler, front/rear

    18154

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 69

    Sprinkler, front/rear

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 904808 Water pump12 287726 Strainer cpl13 238535 .Gasket14 238536 .Strainer15 357813 Holder plate16 500021 Screw M8-1,25x25 8,847 904229 Washer 8,4x16x1,528 923984 Clamp29 929241 Connector1

    10 902105 Connector111 925599 Valve212 924996 Hose connection213 924544 Hose connection214 313002 Hose clamp1015 904878 A Hose reinforced2XL16 923734 Hose connection217 500053 Screw M8-1,25x20 8,8418 904229 Washer 8,4x16x1,51219 902286 Lock nut M8620 901432 Hose connection221 287713 Solenoid valve122 358809 Cable harness125 375745 B Sprinkling tank126 902268 .Cap127 902545 Seal ring128 202043 A Rubber strip4XL29 375805 Holder plate230 357819 Rubber cloth231 500028 Screw M10-1,5x25 8,8632 904230 Washer 10,5x22x2633 902379 A Edge trim2XL35 923683 Plug336 384300 B Sprinkler pipe138 H Sprinkler pipe/bracket139 376873 Spraying nozzle, cpl240 376874 .Housing141 376876 .Gasket142 376877 .Nozzle and strainer, yellow 0.8143 376875 .Retainer144 233215 Ball valve145 791974 Plug threaded146 791977 Hose connection147 928781 Sprinkler, cpl448 923680 .Nozzle clamp149 923962 ..O-ring150 499444 .Strainer151 904116 .Gasket152 791117 .Nozzle body Orange153 923681 .Quick coupling, black154 500016 Screw M6-1,0x55 8,8855 904228 Washer 6,4x12x1,5856 923859 Cover plate857 923876 D Clamp458 902285 Lock nut M6866 904904 A Rubber hose4XL73 923684 Hose connection1

    A) Length as requiredB) Rear, stdD) 2 piecesH) For correct view and PN; see Scraper assembly for same SN.

  • 70

    Drum

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 71

    Drum

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.100 Drum ( Page 72 )210 Wheels ( Page 74 )

  • 72

    Drum

    15468-2

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 73

    Drum

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 357058 Drum12 343744 Magnetic plug M3013 162017 Seal ring M3014 500029 Screw M10-1,5x30 8,8505 904230 Washer 10,5x22x2386 379179 B Holder167 346505 Mounting plate18 345215 Shock absorber89 343490 Air breather1

    10 904230 Washer 10,5x22x23211 111018 Ball bearing112 349202 A Coupling1

    212160 .Rubber cross113 903154 Retaining ring114 160132 O-ring 124, 50x3, 00115 358666 Adapter116 923951 O-ring217 163049 Sealing118 904258 Spherical roller bearing219 350029 Key120 Not used on this model21 357060 Eccentric shaft122 358587 Bearing housing123 357020 Bearing housing124 357055 Drive disc125 358689 Spacer ring126 500044 Screw M6x8227 904228 Washer 6,4x12x1,5228 508028 Screw2029 903287 Plug7

    A) CPLB) Replaces earlier used Lock nut 586018; each holder has two

    nuts

  • 74

    Wheels

    15776-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 75

    Wheels

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 370880 A Wheel42 371112 .Rim13 903789 .Tyre14 903790 .Inner tube15 Not used on this model6 Not used on this model7 902252 Washer208 Not used on this model9 Hydraulic motor, propulsion2

    10 .Nut1011 Not used on this model12 370879 Hub213 500179 Screw20

    A) CPL

  • 76

    Engine

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 77

    Engine

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.110 Engine DEUTZ F2L 2011 ( Page 78 )150 Engine ISUZU 3LD1 PW-05 ( Page 82 )200 Cooling system ISUZU ( Page 84 )305 Intake system DEUTZ ( Page 86 )355 Intake system ISUZU ( Page 88 )400 Fuel system DEUTZ ( Page 90 )450 Fuel system ISUZU ( Page 92 )520 Exhaust system DEUTZ ( Page 94 )555 Exhaust system ISUZU ( Page 96 )

  • 78

    Engine DEUTZ F2L 2011

    15833-2

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 79

    Engine DEUTZ F2L 2011

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 358370 Engine bracket12 904640 Washer 8,4x22x323 358371 Engine bracket14 902902 A Shock absorber45 357165 Engine bracket16 357166 Engine bracket17 357005 Pump bracket18 387491 Cover19 370355 Cover1

    10 904292 Hollow screw111 330331 Washer 18,2x23,9x1,5212 230515 Connector113 330383 Cap hydraulic114 500053 Screw M8-1,25x20 8,8115 500047 Screw M8-1,25x35 8,8216 500021 Screw M8-1,25x25 8,8817 508096 Screw M10-1,5x25H 8,86

    508029 Screw M10-1,5x30H 8,8318 508053 Screw M10-1,5x35H 8,8219 500122 Screw420 500050 Screw1621 904640 Washer 8,4x22x3522 904231 Washer 13x24x2423 600017 Washer1624 288129 Edge trim1XL25 904233 Washer 21x36x3226 388500 Diesel engine127 939515 .Oil filter128 903938 .Fuel filter129 D .Solenoid130 .Oil temp guard131 909370 .Alternator132 939478 ..Charging regulator133 .Oil pressure switch134 939593 .Starter135 E,J .Splined shaft136 945442 E .Splined sleeve137 939976 E .Toothed belt138 902521 .V-belt139 .Fan140 939840 F .Toothed belt141 357003 Coupling142 508095 .Screw143 386133 Hydraulic hose144 586003 Lock nut M8245 390722 H Belt guard146 508025 Screw147 904228 Washer 6,4x12x1,5148 500185 Screw M6-1x14 8,8249 904228 Washer 6,4x12x1,5250 586019 Lock nut M122

    A) Included in item 26D) Engine shut-offE) For vibration pump driveF) Belt and rollerH) Replaces earlier used 359869J) Not sold separately. If damaged; the housing cpl with gear

    has to be exchanged: PN 945443 and sleeve 945442. The sleevehas to be lubricated with graphite grease before assembly !

  • 80

    Engine DEUTZ F2L 2011

    15833-2

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 81

    Engine DEUTZ F2L 2011

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.51 904557 Washer 10,5x22x4252 904230 Washer 10,5x22x2253 904229 Washer 8,4x16x1,51

  • 82

    Engine ISUZU 3LD1 PW-05

    15696-2

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 83

    Engine ISUZU 3LD1 PW-05

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 386477 Engine bracket12 372142 Engine bracket13 372141 Engine bracket14 372140 Engine bracket15 370083 Pump bracket16 370081 Coupling, cpl17 A .Hub18 903624 .Flange19 508095 .Screw1

    10 370142 Nipple111 904292 Hollow screw112 386133 Hydraulic hose113 330331 Washer 18,2x23,9x1,5214 230515 Connector115 330383 Cap hydraulic116 904233 Washer 21x36x3217 330332 Washer118 900478 Shock absorber419 500117 Screw M12x80H 8,8420 903912 Washer421 904231 Washer 13x24x2222 586019 Lock nut M12223 500029 Screw M10-1,5x30 8,8824 904230 Washer 10,5x22x2825 586018 Lock nut M10826 508053 Screw M10-1,5x35H 8,8227 508096 Screw M10-1,5x25H 8,83

    508029 Screw M10-1,5x30H 8,8128 384699 D Diesel engine1

    389610 Diesel engine1908411 .Glow plug3937060 .Oil pressure switch1

    29 908404 .Oil filter130 908405 .Fuel filter131 903704 .Fuel pump132 903706 .Stop solenoid133 908410 .Starter134 939494 .Alternator PCD = 70 mm135 908653 .Fan136 939495 .Fan belt POC = 915 mm, A-type137 903707 Thermo sensor138 902059 Screw1239 904557 B Washer 10,5x22x41

    904637 C Washer 10x18x2140 586018 Lock nut M10241 Cooling system ISUZU ( Page 84 )42 500021 Screw M8-1,25x25 8,8843 904703 Washer 13x24x4144 904230 Washer 10,5x22x22

    A) Not sold separatelyB) LeftC) RightD) Replaced by 389610

  • 84

    Cooling system ISUZU

    15697-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 85

    Cooling system ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 370360 A Radiator12 370139 B .Fan guard13 370323 C .Fan guard14 500053 .Screw M8-1,25x20 8,865 904229 .Washer 8,4x16x1,566 .Radiator17 908629 ..Water radiator18 908630 ...Cap19 939470 ...Plug1

    10 908631 ..Oil cooler111 908633 ..Frame112 908634 ..Cover113 902989 ..Screw614 570102 ..Nut M8415 908632 ..Rubber strip116 ..Plastic hose117 370140 Radiator bracket118 370141 Radiator bracket119 313008 Hose clamp420 500053 Screw M8-1,25x20 8,8421 500021 Screw M8-1,25x25 8,8522 904229 Washer 8,4x16x1,5423 904640 Washer 8,4x22x3524 508056 Screw M8x40125 921118 Clamp126 370138 Radiator hose127 370137 Radiator hose128 343748 Spacer sleeve1

    A) CPLB) UpperC) Lower

  • 86

    Intake system DEUTZ

    16930

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 87

    Intake system DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 385712 Air cleaner, cpl12 385713 .Service cover13 380293 .Vacuator valve14 380295 .Main filter15 380294 .Safety filter16 380296 Holder17 313023 Hose clamp38 380297 Air inlet hose19 Not used on this model

    10 902168 Indicator111 380299 Air inlet hose112 313023 Hose clamp113 500022 Screw M8-1,25x30 8,8214 904640 Washer 8,4x22x3215 380300 Bracket116 500509 Screw3

  • 88

    Intake system ISUZU

    16868

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 89

    Intake system ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 385712 Air cleaner, cpl12 385713 .Service cover13 380293 .Vacuator valve14 380295 .Main filter15 380294 .Safety filter16 380296 Holder17 313023 Hose clamp38 380602 Air inlet hose19 891228 Adapter1

    10 499497 Indicator111 380601 Air inlet hose112 313010 Hose clamp113 500022 Screw M8-1,25x30 8,8214 904640 Washer 8,4x22x32

  • 90

    Fuel system DEUTZ

    15471-4

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 91

    Fuel system DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 384726 Fuel tank, cpl12 373461 Cap1

    902866 .Key Marked "455"1380459 F Cap1

    3 357459 Rubber cloth64 357466 Holder plate25 500053 Screw M8-1,25x20 8,836 904640 Washer 8,4x22x357 160012 O-ring28 357468 Fuel pipe29 330171 Hollow screw2

    10 747282 Copper washer 14x20x1,5411 313001 Hose clamp312 902893 Fuel hose113 357470 Fuel hose114 921072 Clamp115 500021 Screw M8-1,25x25 8,8216 570005 Nut M8217 929322 Fuel strainer118 904984 C Fuel hose1XL19 925802 Cable ties L=142 mmN20 348923 E Level sender121 348924 E .Gasket122 903236 1 Screw, Thread rolling K40x20523 358355 E Dipstick127 372627 1 Cover128 348924 1 Gasket129 313075 Hose clamp130 313108 Hose clamp1

    1) Included in Fuel tank, cpl PN 384726.C) L=200 mmE) OptionF) Italy market

  • 92

    Fuel system ISUZU

    15757-3

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 93

    Fuel system ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 384726 Fuel tank, cpl12 373461 Cap1

    902866 .Key Marked "455"1380459 E Cap1

    3 357459 Rubber cloth64 357466 Holder plate25 500053 Screw M8-1,25x20 8,826 615043 Washer 8,4x18x227 160012 O-ring28 357468 Fuel pipe29 330171 Hollow screw2

    10 747282 Copper washer 14x20x1,5411 313108 Hose clamp112 357469 Fuel hose113 357470 Fuel hose114 925802 Cable ties L=142 mmN15 358355 D Dipstick116 903236 1 Screw, Thread rolling K40x20517 348923 D Level sender118 348924 .Gasket119 372627 1 Cover120 348924 1 Gasket121 313075 Hose clamp1

    1) Included in Fuel tank, cpl PN 384726.D) OptionE) Italy market

  • 94

    Exhaust system DEUTZ

    18355

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 95

    Exhaust system DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 359161 Exhaust pipe12 359119 Holder plate14 387471 Holder15 359163 Muffler16 376941 Exhaust pipe1

    16 500021 Screw M8-1,25x25 8,8217 500190 Screw M8-1,25x80 8.8118 570005 Nut M8120 508029 Screw M10-1,5x30H 8,8223 313086 Clamp325 904640 Washer 8,4x22x3426 904229 Washer 8,4x16x1,52

  • 96

    Exhaust system ISUZU

    17185

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 97

    Exhaust system ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 381381 Exhaust pipe12 381734 Muffler13 381438 Exhaust pipe14 313086 Clamp15 313100 Clamp16 903680 Gasket17 381394 Bracket18 381521 Bracket19 570005 Nut M84

    10 904229 Washer 8,4x16x1,5411 500028 Screw M10-1,5x25 8,8412 904557 Washer 10,5x22x4613 508029 Screw M10-1,5x30H 8,8114 904640 Washer 8,4x22x3415 508053 Screw M10-1,5x35H 8,81

  • 98

    Hydraulic system

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 99

    Hydraulic system

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.100 Hydraulic diagram ( Page 100 )280 Propulsion system DEUTZ, ISUZU ( Page 102 )315 372352 Hydraulic pump, propulsion ( Page 106 )316 Rotating group, valves, charge pump ( Page 108 )317 Control unit, cpl ( Page 110 )350 375631 Hydraulic motor, propulsion, drum ( Page 112 )380 375632 Hydraulic motor, propulsion ( Page 114 )390 380736 Junction block ( Page 116 )420 Vibration system DEUTZ ( Page 118 )470 Vibration system ISUZU ( Page 120 )510 359524 Hydraulic pump, vibration DEUTZ ( Page 124 )552 375649 Hydraulic pump, vibration ISUZU ( Page 126 )555 370173 Vibration valve ISUZU ( Page 128 )611 Steering system Up to 601X7956 ( Page 130 )612 Steering system From 601X7957 Up to 601X8939 ( Page 132 )613 Steering system From 601X8940 ( Page 134 )650 902099 Steering valve ( Page 136 )710 374603 Steering cylinder ( Page 138 )860 Brake system DEUTZ / ISUZU ( Page 140 )

  • 100

    Hydraulic diagram

    15473-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 101

    Hydraulic diagram

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 Diesel engine12 Propulsion pump13 Propulsion motor34 Hydraulic oil tank15 Brake36 Filter17 Brake valve18 Oil cooler19 Measuring nipple4

    10 Check valve111 A Vibration pump112 Steering valve113 Valve block114 Steering cylinder115 Vibration motor1

    A) Incl. steering pump

  • 102

    Propulsion system DEUTZ, ISUZU

    16500

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 103

    Propulsion system DEUTZ, ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 372352 Hydraulic pump, propulsion ( Page 106 )12 375631 Hydraulic motor, propulsion, drum ( Page 112 )14 482998 Hydraulic hose25 334134 Connector26 482830 Hydraulic hose17 500037 Screw M12-1,75x35 8,828 904703 Washer 13x24x429 482898 Hydraulic hose2

    10 482452 Hydraulic hose111 373402 Flange212 234218 Tee connector113 813444 Elbow 90, O-ring114 334135 T-connector115 483118 Hydraulic hose116 334156 Adapter117 901156 Connector118 903925 Connector119 813435 Elbow 90 Up to 601X75191

    334238 Elbow 90 o-ring From 601X7520120 813321 Elbow 90 Up to 601X75192

    334235 Elbow 90 From 601X7520221 371183 Hydraulic oil filter122 902377 .Cover123 902378 .Insert124 902229 .Sealing125 902230 .O-ring126 902231 .O-ring127 902232 .O-ring128 903247 .Filter element129 901313 .Plug130 230277 .Copper washer131 508029 Screw M10-1,5x30H 8,8232 615044 Conical spring washer233 500056 Screw M12x45 8,81034 904231 Washer 13x24x21035 482553 Hydraulic hose136 371313 Hose clamp137 371314 Hose clamp138 904229 Washer 8,4x16x1,5539 500020 Screw M8-1,25x22 8,8440 380736 Junction block ( Page 116 )141 375616 Spacer sleeve242 313102 Cable tiesN43 508096 Screw M10-1,5x25H 8,8844 586003 Lock nut M8145 904230 Washer 10,5x22x2646 500109 Screw M10-1,5x65 8,8247 902379 A Edge trim1XL48 357111 Rubber cloth249 357112 Cover plate250 355869 Spacer sleeve251 586018 Lock nut M10452 902233 Threaded stud253 513013 Screw154 921119 Pipe clamp155 334155 Connector156 902551 Connector157 586019 Lock nut M121058 232070 Plug3

    A) L=0,185 m

  • 104

    Propulsion system DEUTZ, ISUZU

    16500

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 105

    Propulsion system DEUTZ, ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.59 892446 Plug Up to 601X7519160 921099 Clamp161 813443 O-ring262 901157 Measuring nipple279 334197 Elbow 90280 483166 Hydraulic hose481 482941 Hydraulic hose282 234860 Connector483 234233 Adapter284 375632 Hydraulic motor, propulsion ( Page 114 )185 500195 Screw M12-1,75x50 8.82086 904231 Washer 13x24x22087 586019 Lock nut M122088 902379 B Edge trim1XL

    B) L=0,360 m

  • 106

    372352 Hydraulic pump, propulsion

    16514

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 107

    372352 Hydraulic pump, propulsion

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 A Hydraulic pump12 936690 1 .Seal kit13 2 .Rotating group, cpl14 2 .Valve block, cpl15 2 .Charge pump, cpl16 .Control unit, cpl ( Page 110 )18 .Housing19 935158 .Pin1

    10 902670 .Pin111 935219 .Plug112 902724 .Plug113 902625 .Screw314 902624 .Screw115 909514 .Pin116 902792 .Pin117 935159 .O-ring118 902695 .Nut119 935160 .Orifice120 902687 .Pin121 902696 .Orifice230 909757 .Control valve131 ..Rod132 ..Cover133 ..Ring134 ..Spring collar135 ..Spacer136 ..Spring137 ..Snap ring138 ..Screw439 ..Nut140 ..Piston141 ..Spring collar142 909758 ..Seal kit143 ...O-ring144 ...O-ring145 ...Seal ring246 ...Seal ring2

    1) Includes all gaskets and o-rings for the hydraulic pump2) Exploded in section "Rotating group, valves, charge pumpA) CPL

  • 108

    Rotating group, valves, charge pump

    15940

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 109

    Rotating group, valves, charge pump

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 935161 Rotating group12 935171 .Cradle13 935162 .Ring14 935163 .Shaft15 902644 .Wire pin16 935164 .Pin17 935165 .Wire pin18 935166 A .Bearing liner19 902620 .Bearing1

    10 902619 .Roller bearing111 901750 .Retaining ring112 935170 .Retaining ring113 936691 .Seal ring114 935170 .Retaining ring115 935167 .Cylinder with pistons, cpl120 Valve block121 935172 .Relief valve222 903471 .Relief valve123 936692 .Check valve124 936693 .Valve block125 903557 .Bearing bushing126 935176 .Plug127 935177 .Screw428 908384 .Pin229 909514 .Pin230 902641 .O-ring231 902625 .Screw232 901744 .Roller bearing133 B .Solenoid valve134 935178 ..Adapter135 927278 ..O-ring136 935179 ..Valve, cpl137 935180 ...Solenoid140 935181 Charge pump141 935182 .Cover142 935183 .Housing143 903557 .Bearing bushing144 935184 .Shaft145 936706 .Wheel set146 935186 .Key147 935187 .Wear plate148 902654 .Retaining ring149 935188 .Screw450 935189 .Retaining ring151 935190 .Cylindrical pin152 935191 .Seal kit153 ..Seal254 ..O-ring1

    A) One pairB) CPL

  • 110

    Control unit, cpl

    15941

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 111

    Control unit, cpl

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 935194 A Control unit12 935195 .Seal kit13 935196 .Housing14 935197 .Bushing15 935198 .Shaft16 935199 .Spring bush17 935201 .Adapter18 935202 .Pressure spring19 935203 .Eccentric pin1

    10 .Lever111 935204 .Cover112 935205 .Bushing113 935218 B .Gasket114 935206 .Spring115 935207 .Spring collar116 935208 .Spring cage117 935209 .Pin118 935210 .Screw419 935211 .Screw120 902770 .Screw121 B .O-ring122 B .O-ring123 B .O-ring324 B .O-ring125 902767 .Needle roller126 B .Nut127 902773 .Shim128 935212 .Pin129 B .O-ring130 935190 .Cylindrical pin131 935214 .Nut132 902771 .Screw233 935215 .Plug134 935200 .Switch, cpl135 935216 Lever1

    A) CPLB) Incl. in item 2

  • 112

    375631 Hydraulic motor, propulsion, drum

    16591

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 113

    375631 Hydraulic motor, propulsion, drum

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 Hydraulic motor, Cpl12 908788 .Shaft13 903292 .Housing14 902387 .Washer T=2,0 mm15 902388 .Split ring16 902389 .Bearing17 902390 .Bearing18 902391 .Wheel stud59 902392 .Wheel nut5

    10 908795 .Cylinder block111 903453 .Roller812 937091 .Piston813 937092 .Circlip214 908798 .Ring215 902394 .Piston cam116 937093 .Housing117 937094 .Distributor ring118 902397 .Pin119 902398 .Spring920 902399 A .Plug121 902799 .Screw623 908790 .Brake housing124 908791 .Shaft125 908792 .Piston126 908328 A .End cover127 903295 .Plug128 908800 B .Disc kit129 902410 .Shim T=0,1 mmN30 902411 .Shim T=0,3 mmN31 902412 .Screw1232 902413 .Screw833 902416 .Spring134 908794 .Nylon buch135 903450 .Washer836 937089 .Seal kit137 903324 ..Shaft seal138 ..Sealing139 ..Sealing140 ..Sealing141 ..O-ring142 ..O-ring143 902800 ..Gasket144 903455 ..Quad ring145 ..Sealing146 903327 ..O-ring147 ..Shaft seal1

    A) CPLB) 15+13 pcs

  • 114

    375632 Hydraulic motor, propulsion

    16592

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 115

    375632 Hydraulic motor, propulsion

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 Hydraulic motor, Cpl12 908788 .Shaft13 903292 .Housing14 902387 .Washer T=2,0 mm15 902388 .Split ring16 902389 .Bearing17 902390 .Bearing18 902391 .Wheel stud59 902392 .Wheel nut5

    10 908789 .Cylinder block111 903448 .Roller812 937095 .Piston815 902394 .Piston cam116 937093 .Housing117 937094 .Distributor ring118 902397 .Pin119 902398 .Spring920 902399 A .Plug121 902799 .Screw623 908790 .Brake housing124 908791 .Shaft125 908792 .Piston126 908328 A .End cover127 903295 .Plug128 908800 B .Disc kit129 902410 .Shim T=0,1 mmN30 902411 .Shim T=0,3 mmN31 902412 .Screw1232 902413 .Screw833 902416 .Spring134 908794 .Nylon buch135 903450 .Washer836 937089 .Seal kit137 903324 ..Shaft seal138 ..Sealing139 ..Sealing140 ..Sealing141 ..O-ring142 ..O-ring243 902800 ..Gasket144 903455 ..Quad ring145 ..Sealing146 903327 ..O-ring147 ..Shaft seal1

    A) CPLB) 15+13 pcs

  • 116

    380736 Junction block

    16940

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 117

    380736 Junction block

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.Junction block1

    1 .Body12 334121 .Straight connector113 904724 ..O-ring14 234233 1 .Adapter7

    234233 .Adapter55 904725 ..O-ring1

    1) 7 pieces needed when machine is equipped with leakage hoses.

  • 118

    Vibration system DEUTZ

    16501C-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 119

    Vibration system DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 359524 Hydraulic pump, vibration DEUTZ ( Page 124 )12 357373 Radiator13 334135 T-connector14 334238 Elbow 90 o-ring45 234390 Connector16 334524 Connector17 433830401 Connector18 910161 Measuring nipple19 386134 Hydraulic hose1

    10 901692 Screw111 480124 Washer212 482606 Hydraulic hose113 234993 Elbow214 334156 Adapter115 483281 Hydraulic hose116 508096 Screw M10-1,5x25H 8,8217 500019 Screw M8-1,25x16 8.81618 904556 Washer 8,4x16x3,0619 232122 Plug 3/4NPTF120 989151 Oil level glass121 813321 Elbow 90 Up to 601X75191

    334235 Elbow 90 From 601X7520122 373478 Rubber hose123 357139 Connector124 357138 Ventilating filter125 313008 Hose clamp226 349879 Cover127 349880 O-ring128 358486 Rubber strip129 500067 Screw M8-1,25x55 8,8430 359834 Flange131 160016 O-ring132 234341 Elbow 45133 358504 A Rubber hose1XL34 902295 Clamp235 234481 Connector136 160032 O-ring137 508029 Screw M10-1,5x30H 8,8238 904557 Washer 10,5x22x4439 371313 Hose clamp140 371314 Hose clamp141 904229 Washer 8,4x16x1,51842 500021 Screw M8-1,25x25 8,8443 902379 B Edge trim1XL44 902379 C Edge trim1XL46 313102 Cable tiesN48 374626 Cooling air cover149 904901 D Tape1XL57 334197 Elbow 90158 357543 Valve159 892446 Plug Up to 601X7519160 389078 Hydraulic motor1

    F .Seal kit161 482242 Hydraulic hose162 482892 Hydraulic hose163 482889 Hydraulic hose1

    A) L=0,260 mB) L=0,305 mC) L=0,150 mD) L=2,0 mF) PN is missing due to short release date

  • 120

    Vibration system ISUZU

    16502C

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 121

    Vibration system ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 375649 Hydraulic pump, vibration ISUZU ( Page 126 )12 370173 Vibration valve ISUZU ( Page 128 )13 334135 T-connector14 334238 Elbow 90 o-ring45 234390 Connector16 334524 Connector17 433830401 Connector18 910161 Measuring nipple19 386134 Hydraulic hose1

    10 901692 Screw111 480124 Washer212 482963 Hydraulic hose113 334137 Adapter214 334156 Adapter115 482962 Hydraulic hose116 508096 Screw M10-1,5x25H 8,8217 500019 Screw M8-1,25x16 8.81418 904229 Washer 8,4x16x1,51419 232122 Plug 3/4NPTF120 989151 Oil level glass121 813321 Elbow 90 Up to 601X75191

    334235 Elbow 90 From 601X7520122 373478 Rubber hose123 357139 Connector124 357138 Ventilating filter125 313008 Hose clamp226 349879 Cover127 349880 O-ring128 358486 Rubber strip129 508057 Screw430 372721 Hydraulic pipe131 903728 1 O-ring132 234958 Connector133 370979 A Rubber hose1XL34 902295 Clamp235 234481 Connector136 160032 O-ring137 508029 Screw M10-1,5x30H 8,8238 904557 Washer 10,5x22x4439 371313 Hose clamp140 371314 Hose clamp141 904229 Washer 8,4x16x1,5442 500021 Screw M8-1,25x25 8,8443 902379 B Edge trim1XL44 902379 C Edge trim1XL45 Radiator146 313102 Cable tiesN47 334198 Adapter148 370312 Gasket149 904901 F Tape1XL58 357543 Valve159 892446 Plug Up to 601X7519160 359525 Hydraulic motor1

    903431 .Seal kit161 482242 Hydraulic hose162 482892 Hydraulic hose1

    1) Delivered with item 2.A) L=0,215 mB) L=0,305 mC) L=0,150 mF) L=2,0 m

  • 122

    Vibration system ISUZU

    16502C

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 123

    Vibration system ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.63 482998 Hydraulic hose1

  • 124

    359524 Hydraulic pump, vibration DEUTZ

    15818

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 125

    359524 Hydraulic pump, vibration DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 A Hydraulic pump1

    .Pump12 903430 ..Seal kit13 903637 A .Valve14 903330 ..Solenoid valve15 908804 ...Solenoid16 902810 ..Seal kit17 909483 .Screw48 909484 .Washer4

    A) CPL

  • 126

    375649 Hydraulic pump, vibration ISUZU

    16692

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 127

    375649 Hydraulic pump, vibration ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 A Hydraulic pump12 903430 .Seal kit13 .Snap ring14 .Flange15 .Bearing block46 .Housing17 .Pin28 .Pin29 .Gear1

    10 .Drive shaft111 .Coupling112 .Distance plate113 .End housing114 .Bolt415 .Gear116 .Gear1

    A) CPL

  • 128

    370173 Vibration valve ISUZU

    15770

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 129

    370173 Vibration valve ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 A Vibration valve12 903730 .Adapter13 903729 .Screw44 160145 .O-ring15 903637 A .Valve16 902810 ..Seal kit17 903330 A ..Solenoid valve18 908804 ...Solenoid1

    A) CPL

  • 130

    Steering system

    16496-2

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 131

    Steering system

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 374603 Steering cylinder ( Page 138 )12 334235 Elbow 9023 831179 Hydraulic hose24 482398 Hydraulic hose25 630019 Cotter pin46 902183 Steering wheel17 902184 Turning knob18 902185 Insert adapter19 902186 Cover plate1

    10 928830 Rubber washer111 902123 Steering column112 500048 Screw M10-1,5x20 8,8213 813321 Elbow 90 Up to 601X75191

    334235 Elbow 90 From 601X7520114 500030 Screw M10-1,5x35H 8,8215 904230 Washer 10,5x22x2416 902099 Steering valve ( Page 136 )117 234390 Connector118 903003 Connector319 313102 Cable tiesN20 357377 1 Connector121 355869 Spacer sleeve222 359524 Hydraulic pump, vibration DEUTZ ( Page 124 )123 600016 Washer 26x45x4424 334524 Connector125 334524 Connector126 334236 Adapter127 375649 Hydraulic pump, vibration ISUZU ( Page 126 )128 370173 Vibration valve ISUZU ( Page 128 )129 923008 2 Clamp130 500021 2 Screw M8-1,25x25 8,8131 904556 2 Washer 8,4x16x3,0132 904556 2 Washer 8,4x16x3,0133 334234 Tee-connector234 433830401 Connector235 910161 Measuring nipple236 904703 Washer 13x24x41

    1) For machines with Deutz engine2) For machines with Isuzu engine

  • 132

    Steering system

    18086

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 133

    Steering system

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 374603 Steering cylinder ( Page 138 )12 334235 Elbow 9023 831179 Hydraulic hose24 482398 Hydraulic hose25 630019 Cotter pin46 902183 Steering wheel17 902184 Turning knob18 902185 Insert adapter19 902186 Cover plate1

    10 928830 Rubber washer111 902123 Steering column112 500048 Screw M10-1,5x20 8,8213 334235 Elbow 90114 500030 Screw M10-1,5x35H 8,8215 904230 Washer 10,5x22x2416 902099 Steering valve ( Page 136 )117 234390 Connector118 903003 Connector319 313102 Cable tiesN20 357377 1 Connector121 355869 Spacer sleeve222 359524 Hydraulic pump, vibration DEUTZ ( Page 124 )123 600016 Washer 26x45x4424 334524 Connector125 334524 Connector126 334236 Adapter127 375649 Hydraulic pump, vibration ISUZU ( Page 126 )128 370173 Vibration valve ISUZU ( Page 128 )129 923008 2 Clamp130 500021 2 Screw M8-1,25x25 8,8131 904556 2 Washer 8,4x16x3,0132 904556 2 Washer 8,4x16x3,0133 334234 Tee-connector134 433830401 Connector135 910161 Measuring nipple136 904703 Washer 13x24x41

    1) For machines with Deutz engine2) For machines with Isuzu engine

  • 134

    Steering system

    18086

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 135

    Steering system

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 374603 Steering cylinder ( Page 138 )12 334235 Elbow 9023 831179 Hydraulic hose24 482398 Hydraulic hose25 630019 Cotter pin46 372964 Steering wheel, cpl17 935614 .Turning knob19 935613 .Cover1

    10 928830 Rubber washer111 902123 Steering column112 500048 Screw M10-1,5x20 8,8213 334235 Elbow 90114 500030 Screw M10-1,5x35H 8,8215 904230 Washer 10,5x22x2416 902099 Steering valve ( Page 136 )117 234390 Connector118 903003 Connector319 313102 Cable tiesN20 357377 1 Connector121 355869 Spacer sleeve222 359524 Hydraulic pump, vibration DEUTZ ( Page 124 )123 600016 Washer 26x45x4424 334524 Connector125 334524 Connector126 334236 Adapter127 375649 Hydraulic pump, vibration ISUZU ( Page 126 )128 370173 Vibration valve ISUZU ( Page 128 )129 923008 2 Clamp130 500021 2 Screw M8-1,25x25 8,8131 904556 2 Washer 8,4x16x3,0132 904556 2 Washer 8,4x16x3,0133 334234 Tee-connector134 433830401 Connector135 910161 Measuring nipple1

    1) For machines with Deutz engine2) For machines with Isuzu engine

  • 136

    902099 Steering valve

    15480-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 137

    902099 Steering valve

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 A Steering valve12 .Spool and sleeve13 480468 .Ball14 480446 .Threaded bushing15 B .O-ring16 B .Ring17 911620 .Bearing18 480449 .Ring19 480447 .Cross pin1

    11 902861 .Cardan shaft112 903521 .Spring kit113 B .O-ring114 902862 .Valve plate115 902863 .Gear kit116 B .O-ring117 480450 .End cap118 B .Washer120 929008 .Screw with bore121 929009 .Screw622 481303 .Name plate123 480464 .Drive screw224 929010 A .Relief valve 17,0-17,5MPa125 902864 .Spring126 929012 .Shock valve 22,5-24,0 MPa227 929013 .Ball228 B .Seal ring129 929014 .Rolled pin230 480457 Spare parts kit1

    A) CPLB) Included in item 30

  • 138

    374603 Steering cylinder

    16513

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 139

    374603 Steering cylinder

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 A Steering cylinder12 909760 .Seal kit13 ..Scraper ring14 ..Retaining ring15 ..O-ring16 ..Guide ring27 ..Lock ring18 ..Sealing19 160025 ..O-ring1

    10 ..Sealing111 ..Back-up ring212 ..O-ring113 ..Sealing114 ..Guide ring115 ..Nut116 909766 .Guide117 909765 .Cylinder tube118 909764 .Piston block119 926214 .Grease fitting220 238272 .Slide bearing221 151012 .Retaining ring222 635061 .Hair clip423 909761 .Shaft224 909759 .Piston rod125 902576 .Cover2

    A) CPL

  • 140

    Brake system DEUTZ / ISUZU

    16498C

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 141

    Brake system DEUTZ / ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 334463 Connector12 234888 Tee-connector13 892446 Plug Up to 601X751914 234233 Adapter15 483167 Hydraulic hose16 482865 Hydraulic hose17 313102 Cable tiesN8 230400 Cap1

    15 Hydraulic pump, propulsion116 Hydraulic motor, propulsion117 Hydraulic motor, propulsion220 334389 Connector121 234869 T-connector122 482312 Hydraulic hose123 482543 Hydraulic hose1

  • 142

    Electrical equipment

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 143

    Electrical equipment

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.120 Electrical equipment DEUTZ Up to 601X7525 ( Page 144 )130 Electrical equipment DEUTZ From 601X7526 ( Page 148 )180 Electrical equipment ISUZU ( Page 152 )215 Control panel ( Page 156 )240 Electric battery switch DEUTZ ( Page 160 )245 Interlock ( Page 162 )255 Interlock Loxam From 601X8311 ( Page 164 )300 Sprinkler timer ( Page 166 )352 Driving & side direction lights Up to 601X7576 ( Page 168 )353 Driving & side direction lights From 601X7577 ( Page 172 )355 Working lights ( Page 176 )358 Licence plate light, parking lights ( Page 178 )380 Rotating beacon ( Page 180 )

  • 144

    Electrical equipment DEUTZ

    16515-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 145

    Electrical equipment DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 Control panel ( Page 156 )12 383961 Cable harness13 960796 .Connector black, MPM 182 09 ND24 357583 C Cable harness15 902550 1 Battery16 357471 K Battery shelf17 357684 Battery holder18 903372 Battery screw19 357567 Battery switch, cpl1

    10 902560 .Handle111 904961 Battery cable ( + )112 904963 Connection wire113 902384 Battery cable ( - )114 345728 Ground cable115 357584 Holder plate116 801567 Hour meter117 287597 G Relay118 999027 Horn119 285909 Grab handle120 928497 H Push button121 285911 Bushing122 348481 Cover123 925958 Connection224 902203 Plug125 500020 Screw M8-1,25x22 8,8126 904557 Washer 10,5x22x4127 500019 Screw M8-1,25x16 8.8228 904229 Washer 8,4x16x1,5829 2 Cable harness130 385146 Cable harness131 313041 Cable ties L=186 mmN32 508020 Screw M5x20133 904281 Washer 5,3x10x1134 586001 Lock nut M5135 500053 Screw M8-1,25x20 8,8436 586003 Lock nut M8437 533001 Screw338 904697 Washer 3,2x6x0,5539 500053 Screw M8-1,25x20 8,8140 904640 Washer 8,4x22x3141 586003 Lock nut M8142 904229 Washer 8,4x16x1,5143 500047 Screw M8-1,25x35 8,8244 904229 Washer 8,4x16x1,5745 909107 Grommet146 901766 Connector 2-POL147 500021 Screw M8-1,25x25 8,82

    1) This part has unfortunately become obsolete. In this case werecommend you to buy locally; The measurements are

    271x161x226 mm, Voltage= 12 V, Capacity= 75 Ah2) See section " Control panel "C) F/R controlG) StartH) VibrationK) Available; a modification kit 376797, which includes battery

    shelf, shock absorber 4 pcs (which replaces earlier screwand washer), nut 4 pcs, and drawing.

  • 146

    Electrical equipment DEUTZ

    16515-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 147

    Electrical equipment DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.48 3 Seat switch149 385580 Cable harness150 901767 Screw1

    3) See section " Drivers platform "

  • 148

    Electrical equipment DEUTZ

    18089

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 149

    Electrical equipment DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 Control panel ( Page 156 )12 383961 Cable harness13 960796 .Connector black, MPM 182 09 ND24 357583 C Cable harness15 902550 1 Battery Up to 601X80501

    K Battery From 601X805116 377051 Battery shelf17 357684 Battery holder Up to 601X80501

    378370 Battery holder From 601X805118 903372 Battery screw19 357567 Battery switch, cpl1

    10 902560 .Handle111 378743 Battery cable ( + )112 904963 Connection wire113 902384 Battery cable ( - )114 345728 Ground cable115 357584 Holder plate116 801567 Hour meter117 287597 G Relay118 999027 Horn119 285909 Grab handle120 928497 H Push button121 285911 Bushing122 348481 Cover123 925958 Connection224 902203 Plug125 500020 Screw M8-1,25x22 8,8126 904557 Washer 10,5x22x4127 500019 Screw M8-1,25x16 8.8228 904229 Washer 8,4x16x1,5429 2 Cable harness130 385146 Cable harness131 313041 Cable ties L=186 mmN32 508020 Screw M5x20133 904281 Washer 5,3x10x1134 586001 Lock nut M5135 791182 Lock nut M8436 586003 Lock nut M8437 533001 Screw338 904697 Washer 3,2x6x0,5539 500053 Screw M8-1,25x20 8,8140 904640 Washer 8,4x22x3141 586003 Lock nut M8142 904229 Washer 8,4x16x1,51

    1) This part has unfortunately become obsolete. In this case werecommend you to buy locally; The measurements are

    271x161x226 mm, Voltage= 12 V, Capacity= 75 Ah2) See section " Control panel "C) F/R controlG) StartH) VibrationK) Obsolete. The reason is that we don't have a dry charged

    version available. In thissituation we recommend you to buy locally; The measurementsare 278x175x205 mm, Voltage= 12 V, Capacity= 75 Ah

    CCA (EN)= 600 A

  • 150

    Electrical equipment DEUTZ

    18089

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 151

    Electrical equipment DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.43 500047 Screw M8-1,25x35 8,8244 904229 Washer 8,4x16x1,5745 909107 Grommet146 901766 Connector 2-POL147 500021 Screw M8-1,25x25 8,8248 3 Seat switch149 385580 Cable harness150 901767 Screw151 376796 Shock absorber4

    3) See section " Drivers platform "

  • 152

    Electrical equipment ISUZU

    17473

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 153

    Electrical equipment ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 Control panel ( Page 156 )12 384264 A Cable harness13 960796 Connector black, MPM 182 09 ND24 357583 B Cable harness15 902550 C Battery Up to 601X80501

    L Battery From 601X805116 380960 Battery shelf17 357684 Battery holder Up to 601X80501

    378370 Battery holder From 601X805118 903372 Battery screw19 791078 3 Electric battery switch1

    10 791079 3 Diode111 378742 Battery cable112 791091 D Connection cable113 903757 Battery cable ( - )114 345728 Ground cable115 384099 Holder plate116 801567 Hour meter117 287597 E Relay118 999027 Horn119 285909 Grab handle120 928497 F Push button121 285911 Bushing122 348481 Cover123 925958 Connection224 902203 Plug125 500020 Screw M8-1,25x22 8,8127 500019 Screw M8-1,25x16 8.8828 904229 Washer 8,4x16x1,51029 1 Cable harness130 385146 J Cable harness131 313041 Cable ties L=186 mmN32 508020 Screw M5x20433 904281 Washer 5,3x10x1434 586001 Lock nut M5435 287597 G Relay136 586003 Lock nut M85

    1) See section " Control panel "3) Delivered with engine.A) EngineB) F/R ControlC) This part has unfortunately become obsolete. In this case we

    recommend you to buy locally; The measurements are271x161x226 mm, Voltage= 12 V, Capacity= 75 Ah

    D) Switch-starterE) StartF) VibrationG) StopJ) Rear water pumpL) Obsolete. The reason is that we don't have a dry charged

    version available. In thissituation we recommend you to buy locally; The measurementsare 278x175x205 mm, Voltage= 12 V, Capacity= 75 Ah

    CCA (EN)= 600 A

  • 154

    Electrical equipment ISUZU

    17473

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 155

    Electrical equipment ISUZU

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.37 533001 Screw338 904647 Connection wire339 500048 Screw M10-1,5x20 8,8140 904637 Washer 10x18x2241 500022 Screw M8-1,25x30 8,8242 287597 H Relay143 500047 Screw M8-1,25x35 8,8244 904229 Washer 8,4x16x1,5745 909107 Grommet146 901766 Connector 2-POL147 371893 Holder plate148 903817 I Relay149 903082 Hose shield150 903705 Safety unit151 903708 Timer Glow152 2 Seat switch153 500053 Screw M8-1,25x20 8,8154 921119 Pipe clamp155 901228 Fuse 15A156 385580 Cable harness157 901767 Screw1

    2) See section " Drivers platform "H) For safety unitI) Glow

  • 156

    Control panel

    16517

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 157

    Control panel

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 358663 Control panel plate12 384263 Cable harness13 930200 Emergency stop1

    930154 .Contact piece, NC14 928928 B Push button15 930151 C Switch1

    930153 H,M Switch1385644 Decal Electrical battery switch1

    6 932032 D Push button17 930153 E Switch18 932058 F Switch19 930155 Connector1

    10 930163 Contact piece, NO211 357574 Control panel plate112 911456 Hole plug613 357585 Display panel114 902225 Lamp socket 2-POL315 985125 Bulb 12V316 902224 Screw M6x10817 160269 O-ring318 345870 Plug119 371326 Distribution control plate121 903820 Fuse box122 901226 Fuse 7.5A423 901240 Connector424 382782 Relay, VBS125 287597 I Relay126 287597 Relay127 287597 Relay128 541702 Screw M6x12629 901767 Screw430 902223 Screw431 500075 Screw M6-1,0x25 8.8232 586002 Lock nut M6233 570004 Nut M6234 904228 Washer 6,4x12x1,5235 1 Cable harness136 932050 E Switch137 930195 Contact block138 903063 Ground cable140 930182 J Contact block141 355468 J Fuel gauge1

    355258 J .Lamp holder1985012 J .Bulb1

    42 358418 K Cable harness143 903239 L Switch144 902866 .Key Marked "455"1

    1) See section " Electrical equipment "B) StarterC) IgnitionD) HornE) SprinklerF) VibrationH) Ignition, electrical battery switch.I) Hour meterJ) OptionK) Option, fuel gaugeL) Option, key starterM) Three fixed positions.

  • 158

    Control panel

    16517

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 159

    Control panel

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.45 930154 H Contact piece, NC4

    930154 H Contact piece, NC446 932059 J Pilot lamp cpl Yellow147 985012 J Bulb148 901227 N Fuse 10A249 371344 Cover150 930154 Contact piece, NC151 932032 O Push button1

    H) Ignition, electrical battery switch.J) OptionN) Other fuses, optionsO) Option, sprinkler

  • 160

    Electric battery switch DEUTZ

    17433

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 161

    Electric battery switch DEUTZ

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 384083 Holder plate12 791078 Electric battery switch13 791079 2 Diode15 384191 Cable harness16 500022 Screw M8-1,25x30 8,827 570005 Nut M828 904229 Washer 8,4x16x1,54

    12 378742 Battery cable113 791472 Connection cable, coarse115 904015 Fuse holder116 901225 Fuse 5A120 Control panel21 1 Cable harness22 1 Hour meter23 1 Starter relay24 1 Fastener

    1) See section " Electrical equipment ".2) Delivered with Cable harness PN 384191.

  • 162

    Interlock

    17258

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 163

    Interlock

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 A Control panel plate12 Emergency stop13 381994 Cable harness14 355301 Buzzer15 904846 Delay relay17 533070 Screw18 904281 Washer 5,3x10x129 586001 Lock nut M52

    10 533025 Screw M5x121

    A) Left

  • 164

    Interlock Loxam

    18320

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 165

    Interlock Loxam

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 A Control panel plate12 Emergency stop13 381994 Cable harness15 904846 Delay relay16 999027 C Horn17 533070 Screw18 904281 Washer 5,3x10x129 586001 Lock nut M52

    10 533025 Screw M5x12111 904734 Washer 8,4x26x4212 500022 Screw M8-1,25x30 8,8213 377697 Cable harness114 903593 Diode1

    A) LeftC) Extra horn for interlock placed beside STD horn, font left

  • 166

    Sprinkler timer

    17434

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 167

    Sprinkler timer

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 Control panel plate12 383960 Switch, cpl13 383967 Cable harness1

    357562 .Relay holder14 384359 Decal15 374213 Time relay1

  • 168

    Driving & side direction lights

    16688-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 169

    Driving & side direction lights

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 903820 Fuse box12 904989 Flash relay Option13 902223 Screw14 373493 A Cable harness15 932055 B Switch16 930165 Contact block17 932058 C Switch18 930182 Contact block19 930154 D Contact piece, NC2

    10 932056 E Switch111 930162 Connector212 930163 D Contact piece, NO313 930161 F Switch114 985012 G Bulb315 901240 Connector116 901225 Fuse 5A217 901227 Fuse 10A118 901228 Fuse 15A219 373490 H Cable harness120 357812 I Cable harness121 371561 J Lights bracket2

    380192 K Lights bracket222 902066 L Headlight2

    904313 M Headlight224 900790 N Bulb 60/55w H4225 902227 O Work light226 901369 P Bulb 55w H3227 349795 Holder plate428 508020 Screw M5x201229 586001 Lock nut M5830 904281 Washer 5,3x10x1831 900794 Turn signals232 900793 Tail light233 928502 F Bulb 21w434 985014 Q Bulb 5w235 900791 R Bulb238 904229 Washer 8,4x16x1,5139 586003 Lock nut M8140 902064 Direction lights241 985013 Bulb 12V,5W242 358000 S Cable harness143 600002 Washer4

    A) Driving lightsB) Head lightC) LightsD) SmallE) HazardF) Turn signalG) SwitchH) FrontI) RearJ) RedK) YellowL) Right asym, H4, frontM) Left asym, H4, frontN) H4, head light, frontO) H3, rearP) H3, rear lightQ) Parking lightR) Tail/stop lightS) Direction lights

  • 170

    Driving & side direction lights

    16688-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 171

    Driving & side direction lights

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.44 923976 Nut4

  • 172

    Driving & side direction lights

    18097

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 173

    Driving & side direction lights

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 903820 Fuse box12 904989 Flash relay Option13 902223 Screw14 373493 A Cable harness15 932055 B Switch16 930165 Contact block17 932058 C Switch18 930182 Contact block19 930154 D Contact piece, NC2

    10 932056 E Switch111 930162 Connector212 930163 D Contact piece, NO313 930161 F Switch114 985012 G Bulb315 901240 Connector116 901225 Fuse 5A217 901227 Fuse 10A118 901228 Fuse 15A219 373490 H Cable harness120 357812 I Cable harness121 371561 J Lights bracket2

    380192 K Lights bracket222 902066 L Headlight2

    904313 M Headlight224 900790 N Bulb 60/55w H4225 902227 O Work light226 901369 P Bulb 55w H3227 389631 Holder plate428 791965 Screw M5x168

    904281 R Washer 5,3x10x1831 904315 U Direction lamp1

    904316 V Direction lamp132 904317 X Direction lamp1

    904318 Y Direction lamp133 928502 F Bulb 21w634 985014 Q Bulb 5w4

    A) Driving lightsB) Head lightC) LightsD) SmallE) HazardF) Turn signal/stop lightG) SwitchH) FrontI) RearJ) RedK) YellowL) Right asym, H4, frontM) Left asym, H4, frontN) H4, head light, frontO) H3, rearP) H3, rear lightQ) Parking lightR) Not illustratedU) Front leftV) Front rightX) Rear leftY) Rear right

  • 174

    Driving & side direction lights

    18097

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 175

    Driving & side direction lights

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.38 904229 Washer 8,4x16x1,5139 586003 Lock nut M8140 902064 Direction lights241 985013 Bulb 12V,5W242 358000 S Cable harness143 600002 T Washer444 923976 T Nut445 508020 T Screw M5x20446 508075 Screw M5x124

    S) Direction lightsT) This item is not used in new design; where the holes in the

    hood frame are threaded.

  • 176

    Working lights

    16666-1

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 177

    Working lights

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 903820 Fuse box12 358102 A Cable harness13 932055 A Switch14 930165 Contact block15 985012 B Bulb16 930163 C Contact piece, NO37 901227 Fuse 10A28 376113 A Cable harness19 371561 4 Lights bracket2

    10 902227 E Work light211 901369 F Bulb 55w H3212 902227 G Work light213 901369 H Bulb 55w H3216 904229 Washer 8,4x16x1,5117 586003 Lock nut M81

    4) Right asym., including machines originally delivered toFrance

    A) Work lightsB) SwitchC) SmallE) H3, frontF) H3, head light, frontG) H3, rearH) H3, rear light

  • 178

    Licence plate light, parking lights

    16667

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 179

    Licence plate light, parking lights

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 355797 Licence plate holder12 929455 Licence plate light13 985013 A Bulb 12V,5W54 355829 B Cable harness15 533032 Screw36 535010 Screw17 615042 Conical spring washer18 570003 Nut M539 600003 Washer23

    10 586001 Lock nut M51111 508020 Screw M5x20812 358564 D Lamp socket2

    358563 E Lamp socket213 624027 Rivet814 903081 C Cable4

    909152 .Rubber grommet415 903078 D Position light216 903079 E Position light2

    A) Turn/position lightB) Licence plate lightC) Position lightD) FrontE) Rear

  • 180

    Rotating beacon

    15489-3

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 181

    Rotating beacon

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 Not used on this model2 357663 1 Lamp holder13 499162 1 Hand knob24 357679 1 Lamp holder15 500028 1 Screw M10-1,5x25 8,826 586018 1 Lock nut M1027 904230 1 Washer 10,5x22x228 909152 1 Rubber grommet19 500044 Screw M6x81

    10 313041 Cable ties L=186 mmN11 357666 Cable harness112 357668 2 Cable harness113 903820 2 Fuse box114 901227 Fuse 10A115 930166 C Switch116 985012 E Bulb117 930165 Contact block118 358452 3 Lamp holder119 500237 3 Screw M8x120220 586003 3 Lock nut M8221 904229 3 Washer 8,4x16x1,5222 389577 5 Rotating beacon123 500044 Screw M6x8124 902542 Lock fluid1

    1) Not valid for rollers with rops2) Existing on rollers with driving lights3) Valid only for rollers with rops5) Replaces PN 999011.C) Rot. beaconE) Switch

  • 182

    Drivers platform

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 183

    Drivers platform

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.120 Drivers platform ( Page 184 )150 Control panel ( Page 186 )175 Arm rests, seat belt, laterally adjusting ( Page 188 )185 Comfort drivers seat, laterally adjusting and seat belt ( Page 190 )190 Bench ( Page 192 )220 Engine and forward/reverse controls DEUTZ ( Page 194 )260 Engine and forward/reverse controls ISUZU ( Page 196 )300 F/r controls dual, control panel mounted ( Page 198 )350 F/r control dual left side, platform mounted ( Page 200 )400 Rops and fops ( Page 202 )

  • 184

    Drivers platform

    16518

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

  • 185

    Drivers platform

    Dynapac Compaction Equipment AB

    SCC122C-2EN3

    CodePart No.Ref. No. Qty DescriptionRem.1 358213 Platform12 Control panel ( Page 186 )13 372570 A,2 Seat1

    909535 B .Sliding rail1909536 C .Sliding rail, cpl1936283 .Seat switch1

    4 372523 Seat frame15 357407 B Hand rail16 357408