Dynapac CC4200C VI - baupowergroup.at
Transcript of Dynapac CC4200C VI - baupowergroup.at
Dynapac CC4200C VICombi rollers
Technical data
Masses
Max. operating mass 11000 kg
Operating mass (incl. ROPS) 9400 kg
Module mass (front/rear) 5000 kg/4400 kg
Traction
Speed range 0-12 km/h
Vertical oscillation ±7°
Theor. gradeability 41 %
Compaction
Wheel load 1100 kg/wheel
Centrifugal force (high/low amplitude) 128/84 kN
Nominal amplitude (high/low) 0.8/0.3 mm
Static linear load 29.8 kg/cm
Vibration frequency (high/low amplitude) 51/67 Hz
Water tank volume 680 l
Emulsion tank 200 l
Water tank volume (front drum steering) 540 l
Compaction (CE)
Centrifugal force (high/low amplitude) 113 kN/69 kN
Vibration frequency (high/low amplitude) 48 Hz/61 Hz
Engine
Manufacturer/Model Cummins QSF3.8 IV/T4f
Type Water cooled turbo Diesel with After Cooler
Rated power, SAE J1995 97 kW (130 hp ) @ 2200 rpm
Fuel tank capacity 180 l
DEF tank capacity 15 l
Engine
Manufacturer/Model Cummins QSF3.8 IIIA/T3
Type Water cooled turbo Diesel with After Cooler
Rated power, SAE J1995 104 kW (140 hp ) @ 2200 rpm
Fuel tank capacity 180 l
Hydraulic system
Driving
Axial piston pump with variable displacement.Radial piston motors (3) with variable
displacement.
Vibration Axial piston pump with variable displacement.Axial piston motor with constant displacement.
Steering Gear pump with constant displacement.
Service brake Hydrostatic in forward and reverse lever.
Parking/Emergency brake
Failsafe multidisc brake in drum and wheel motors.
Dynapac CC4200C VICombi rollers
Technical data
Masses
Max. operating mass 11000 kg
Operating mass (incl. ROPS) 9400 kg
Module mass (front/rear) 5000 kg/4400 kg
Traction
Speed range 0-12 km/h
Vertical oscillation ±7°
Theor. gradeability 41 %
Compaction
Wheel load 1100 kg/wheel
Centrifugal force (high/low amplitude) 128/84 kN
Nominal amplitude (high/low) 0.8/0.3 mm
Static linear load 29.8 kg/cm
Vibration frequency (high/low amplitude) 51/67 Hz
Water tank volume 680 l
Emulsion tank 200 l
Water tank volume (front drum steering) 540 l
Compaction (CE)
Centrifugal force (high/low amplitude) 113 kN/69 kN
Vibration frequency (high/low amplitude) 48 Hz/61 Hz
Engine
Manufacturer/Model Cummins QSF3.8 IV/T4f
Type Water cooled turbo Diesel with After Cooler
Rated power, SAE J1995 97 kW (130 hp ) @ 2200 rpm
Fuel tank capacity 180 l
DEF tank capacity 15 l
Engine
Manufacturer/Model Cummins QSF3.8 IIIA/T3
Type Water cooled turbo Diesel with After Cooler
Rated power, SAE J1995 104 kW (140 hp ) @ 2200 rpm
Fuel tank capacity 180 l
Hydraulic system
Driving
Axial piston pump with variable displacement.Radial piston motors (3) with variable
displacement.
Vibration Axial piston pump with variable displacement.Axial piston motor with constant displacement.
Steering Gear pump with constant displacement.
Service brake Hydrostatic in forward and reverse lever.
Parking/Emergency brake
Failsafe multidisc brake in drum and wheel motors.
Find us locally at www.dynapac.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
dynapac_cc4200c_vi_en-20181009.130502.pdf 2018-10-09 13:05
Dynapac CC4200C VICombi rollers
Technical data
Dimensions
A. Wheelbase 3,720 mm
B1. Width, front 1,910 mm
B2. Width, with cab 2,140 mm
C. Curb clerance 815 mm
D. Drum diameter 1,300 mm
H1. Height, with ROPS/cab 2,990 mm
K. Ground clearance 310 mm
L. Length 5,001 mm
O. Off-set 520 mm
R1. Turning radius, outside 7,270 mm
R2. Turning radius, inside 5,590 mm
R3. Turning radius with off-set, outside 5,460 mm
R4. Turning radius with off-set, inside 3,780 mm
S. Drum shell thickness 20 mm
W1. Drum width 1,680 mm
W2. Width, wheel module 1,610 mm
W3. Width, tyre 322 mm
W4. Wheel track 464 mm
W5. Wheel spacing 128 mm
α. Steering angle ±32°
Dynapac CC4200C VICombi rollers
Technical data
Dimensions
A. Wheelbase 3,720 mm
B1. Width, front 1,910 mm
B2. Width, with cab 2,140 mm
C. Curb clerance 815 mm
D. Drum diameter 1,300 mm
H1. Height, with ROPS/cab 2,990 mm
K. Ground clearance 310 mm
L. Length 5,001 mm
O. Off-set 520 mm
R1. Turning radius, outside 7,270 mm
R2. Turning radius, inside 5,590 mm
R3. Turning radius with off-set, outside 5,460 mm
R4. Turning radius with off-set, inside 3,780 mm
S. Drum shell thickness 20 mm
W1. Drum width 1,680 mm
W2. Width, wheel module 1,610 mm
W3. Width, tyre 322 mm
W4. Wheel track 464 mm
W5. Wheel spacing 128 mm
α. Steering angle ±32°
Find us locally at www.dynapac.com
We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.
dynapac_cc4200c_vi_en-20181009.130502.pdf 2018-10-09 13:05