Dynamic Modeling of Gas Lift Designs and...
Transcript of Dynamic Modeling of Gas Lift Designs and...
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 1
Dynamic Modeling of Gas Lift Designs and Operations
• Jason Bigelow, Gas Lift Engineer• Matthew Clark, Gas Lift Engineer• Schlumberger
40th Gas-Lift WorkshopHouston, Texas, USAOct. 23 – 27, 2017
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 2
Agenda
• Background• Case Studies• Analysis• Conclusion
Background
• Traditional gas lift method – steady state designs• Provide services for unique gas lift situations• Dynamic modelling available to bridge the gap
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 3
Case Studies
• Multi-point injection• Unloading vs API standard• Burst disc/long duration unloading
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 4
Case Study 1 Multi-point Injection
• Client had issue with valve plugging• Determine if placing a deeper redundant gas lift
valve would eliminate the need for intervention• Multi-point injection concerns
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 5
Case Study 1 Multi-point Injection
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 6
Case Study 1 Multi-point Injection
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 7
Case Study 1 Multi-point Injection
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 8
0% Plugged
25% Plugged
50% Plugged 75%75% Plugged
Time, Hrs
GAS IN
JECTION RATE
FLOW THROUGH TOP VALVE
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 9
• First unloading on project• Well design vs changed parameters => unload• Compare with API 1 bbl/min
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 10
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 11
• 1 bbl/min – industry standard for unloading fluid through gas lift mandrel
• Risk of valve damage – flow cutting – at higher rates
• Currently using API standard for unloading to maintain low flow rate
• Determine injection rates profiles to ensure 1bbl/min is not exceeded
• Examine pressure build up in casing and tubing then compare with field data
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 12
• Initial OLGA modelling to achieve maximum of 1bbl/min during unloading
Injection Rates
Results
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 13
• Annular liquid volume
ANNULAR VO
LUME
Time, Hrs
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 14
• Annular unloading animation
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 15
• Tubing unloading animation
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 16
Gas injected through valve
Expected annulus pressure profile for successful unloading
Time, Hrs
INJECTIO
N PRESSU
RE
OLGA Predicted Rate
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 17
• Unloading case – optimization
• Maintaining 1bbl/min throughout entire unloading process
• Modelling shows a 50% reduction in unloading time over field data.
• Subject to availability of gas for unloading (natural gas versus nitrogen)
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 18
• API rates put into OGLA
Case Study 2 Unloading vs API
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 20
• Initial OGLA model conservative to API and field data but adapting to 1 bbl/min through the valve had different slopes than API.
• OLGA model injection rates can be increased at the beginning of the process for higher rate through the valve closer to 1bbl/min to save time
• Unloading profiles match typical pressure profiles of a successfully unloaded well
• Further refinement of model completed to match field data to determine fluid rates through valve
Case Study 3 Long Duration Unloading
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 21
• Deepwater subsea well• Burst disc in the valve• 1.5 bbl/min unloading through XLift* valve• Unloading well over months
Case Study 3 Long Duration Unloading
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 22
• Manifolded gas injection choke
Case Study 3 Long Duration Unloading
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 23
• OLGA model
Case Study 3 Long Duration Unloading
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 24
• Flow through the tubes
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
0 1 3 4 6 7 9 10 12 13 14 16 17 19 20 22 23 24 26 27 29 30 32 33 35 36 37 39 40 42 43 45 46 48
Flow
Rat
e (M
Msc
f/d)
Time (hr)
Tube Gas Lift Flow Rates
Tube 1
Tubes 2 and 3
Tubes 4 and 5
Tubes 6 and 7
• Burst disc study• Sudden fluid rate through orifice with ruptured disc
Case Study 3 Long Duration Unloading
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 25
• CFD model• Analyze hot spots
Case Study 3 Long Duration Unloading
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 26
• Unloading in stages
Case Study 3 Long Duration Unloading
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 27
Conclusion
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 28
• Plugging top valve effects on 2nd valve• Nitrogen unloading• Burst disc and long duration unloading
Questions
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 29
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 30
CopyrightRights to this presentation are owned by the company(ies) and/or author(s) listed on the title page. By submitting this presentation to the Gas-Lift Workshop, they grant to the Workshop, the Artificial Lift Research and Development Council (ALRDC), and the American Society of Mechanical Engineers (ASME), rights to:
– Display the presentation at the Workshop.– Place it on the www.alrdc.com web site, with access to the site to be as
directed by the Workshop Steering Committee.– Place it on a CD for distribution and/or sale as directed by the Workshop
Steering Committee.Other uses of this presentation are prohibited without the expressed written permission of the company(ies) and/or author(s) who own it and the Workshop Steering Committee.
Oct. 23 - 27, 2017 2017 Gas-Lift Workshop 31
DisclaimerThe following disclaimer shall be included as the last page of a Technical Presentation or Continuing Education Course. A similar disclaimer is included on the front page of the Gas-Lift Workshop Web Site.The Artificial Lift Research and Development Council and its officers and trustees, and the Gas-Lift Workshop Steering Committee members, and their supporting organizations and companies (here-in-after referred to as the Sponsoring Organizations), and the author(s) of this Technical Presentation or Continuing Education Training Course and their company(ies), provide this presentation and/or training material at the Gas-Lift Workshop "as is" without any warranty of any kind, express or implied, as to the accuracy of the information or the products or services referred to by any presenter (in so far as such warranties may be excluded under any relevant law) and these members and their companies will not be liable for unlawful actions and any losses or damage that may result from use of any presentation as a consequence of any inaccuracies in, or any omission from, the information which therein may be contained.The views, opinions, and conclusions expressed in these presentations and/or training materials are those of the author and not necessarily those of the Sponsoring Organizations. The author is solely responsible for the content of the materials.The Sponsoring Organizations cannot and do not warrant the accuracy of these documents beyond the source documents, although we do make every attempt to work from authoritative sources. The Sponsoring Organizations provide these presentations and/or training materials as a service. The Sponsoring Organizations make no representations or warranties, express or implied, with respect to the presentations and/or training materials, or any part thereof, including any warrantees of title, non-infringement of copyright or patent rights of others, merchantability, or fitness or suitability for any purpose.