DX1000/DX1000N/DX2000 Custom Display User's …...Thank you for purchasing DX1000/DX1000N/DX2000...
Transcript of DX1000/DX1000N/DX2000 Custom Display User's …...Thank you for purchasing DX1000/DX1000N/DX2000...
User’sManual
DX1000/DX1000N/DX2000Custom Display
IM 04L41B01-04E2nd Edition
�IM 04L41B01-04E
2nd Edition: March 2010 (YK)All Right Reserved, Copyright © 2008, Yokogawa Electric Corporation
Thank you for purchasing DX1000/DX1000N/DX2000 (Hereafter, called “DX”).This manual explains the custom display function of DX. Read this manual thoroughly in advance to use this function properly. Moreover, read it together with User’s Manuals IM04L41B01-01E or IM04L42B01-01E.
Notes● Thecontentsofthismanualmaychangewithoutpriornoticeinviewofimprovingthe
performance and function.● Weensurethecontentsofthismanual.If,however,youfindanyquestionablepoints
ormistakes,contactourbranchoffice,branchstore,orbusinessoffice.● Itisprohibitedtoreprintorreproduceallorpartsofthismanualwithoutpermission.● WedevelopedandcreatedtheTCP/IPsoftwareandTCP/IPsoftwaredocuments
ofthisproductbasedonBSDNetworkingSoftwareRelease1licensedfromtheUniversity of California.
Trademarks● vigilantplant,DAQSTATION,Daqstation,andDXAdvancedareourregistered
trademarks. ● Microsoft andWindowsare the registered trademarksor trademarks in theUnited
StatesandothercountriesofMicrosoftCorporation.● AdobeandAcrobatare the registered trademarksor trademarksofAdobeSystems
Incorporated.● Other product and company names described in thismanual are registered
trademarks or trademarks of their respective companies.● Thismanual doesnot displaymarks®and™ for the registered trademarksor
trademarks of each company.
H�story1stEdition: November20082nd Edition : March 2010
ii IM 04L41B01-04E
How to Use This Manual
Structure of the ManualBefore reading this manual, read the Operation Guide and User’s Manual to understand the basic operations.This manual consists of the following three chapters, an appendix, and an index.Chapter Title and description1 Overview and Basic Operations Explainsthebasicoperationsforconfiguringthecustomdisplay.
2 Advanced Settings of Screen and Component Explainstheattributeofeachcomponent.
3 Saving and Reading Screen Data Explains the saving and reading of the configured custom display.
Appendix Gives an example of the construction of an actual custom display. Index Theindexislistedalphabetically.
Symbols Used in This Manual
Subheadings
Procedure
Explanation
Note Calls attention to information that is important for proper operation of the instrument.
Carry out the procedure according to the step numbers.All procedures are written with inexperienced users in mind;depending on the operation, not all steps need to be taken.
Explanation gives information such as limitations related the procedure.
This mark is used to indicate a reference to a related procedure or explanation.Example : ►Section 4.1
Markings
iiiIM 04L41B01-04E
Revision History
Document name: DX1000/DX1000N/DX2000 Custom Display User’s ManualDocumentnumber: IM04L41B01-04E
Edition Revised Revisions, DX recorder series number1st November,2008 New, R32nd March, 2010 Added components
Componentsadded:Groupname,Systemicon,Memorybar,Timelabel,Batchgroupnumber, Batchname,andModbusIn.
iv IM 04L41B01-04E
Contents
How to Use This Manual .................................................................................................................. iiRevision History .............................................................................................................................. iii
Chapter 1 Overview and Basic Operations1.1 Overview ........................................................................................................................ 1-11.2 Display the BuilderScreen ............................................................................................. 1-41.3 SetGrid(CursorMovementInterval) ............................................................................. 1-61.4 Create Components ....................................................................................................... 1-71.5 Move Components ........................................................................................................1-111.6 ChangetheComponentSize ....................................................................................... 1-121.7 Display the AttributeSettingDialogofComponents ................................................... 1-131.8 Copy Components (Copy and Paste) .......................................................................... 1-141.9 Change the ComponentArrangementOrder ............................................................... 1-151.10 Have the VisibilityAttributeofaComponentDepend on Another Component ............ 1-161.11 Register Components in the GR. CTRL ....................................................................... 1-181.12 Delete Components ..................................................................................................... 1-221.13 OtherOperations .......................................................................................................... 1-23
Chapter 2 Advanced Settings of Screen and Component2.1 ScreenAttribute .............................................................................................................. 2-12.2 CommonAttributesofComponents ............................................................................... 2-22.3 AttributesofDigital Components .................................................................................... 2-52.4 AttributesofBar Graph Components ............................................................................. 2-72.5 AttributesofTrend Components .................................................................................... 2-92.6 AttributesofScaleComponents ................................................................................... 2-122.7 AttributesofSwitchComponents ................................................................................. 2-162.8 AttributesofLabelComponents ................................................................................... 2-182.9 AttributesofTag No. Components ............................................................................... 2-202.10 AttributesofTag Comment Components ..................................................................... 2-222.11 AttributesofSimpleDigitalComponents ...................................................................... 2-242.12 AttributesofSimpleBarGraphComponents ............................................................... 2-252.13 AttributesofUnit Components ..................................................................................... 2-282.14 AttributesofAlarm Indicator Components .................................................................... 2-302.15 AttributesofSpanLowerLimit(SpanUpperLimit)Components ................................. 2-312.16 AttributesofMessage List Components ...................................................................... 2-332.17 AttributesofAlarm List Components ............................................................................ 2-352.18 AttributesofBitmap Components ................................................................................ 2-372.19 AttributesofGroup Name Components ....................................................................... 2-392.20 SystemIconComponentAttributes ............................................................................. 2-412.21 AttributesofMemory Bar Components ........................................................................ 2-422.22 AttributesofTimeLabelComponents .......................................................................... 2-442.23 AttributesofBatchGroupNumberComponents .......................................................... 2-462.24 AttributesofBatch Name Components ........................................................................ 2-482.25 AttributesofLine Components ..................................................................................... 2-502.26 AttributesofRectangle Components ........................................................................... 2-512.27 AttributesofCircle Components .................................................................................. 2-522.28 AttributesofPushButtonComponents ........................................................................ 2-532.29 AttributesofComment Box Components ..................................................................... 2-55
vIM 04L41B01-04E
1
2
3
App
Index
2.30 AttributesofComment Block Components .................................................................. 2-562.31 AttributesofCommunication Input Components .......................................................... 2-582.32 AttributesofModbusInComponents ........................................................................... 2-59
Chapter 3 Saving and Reading Screen Data3.1 SavingScreenData ....................................................................................................... 3-13.2 ReadingScreenData ..................................................................................................... 3-4
AppendixAppendix 1 Example of Creating a Custom Display ............................................................App-1Appendix2 ViewingScreensCreatedinDAQStudio .........................................................App-10Appendix3 DifferencesinComponentsbyReleaseNumber ............................................App-12
Index
Contents
1-1IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
1.1 Overview
Custom display is a function to allow you to configure any screen to use it as the operation screen. Custom display consists of the builder screen and execution screen, which actually displaysaconfiguredscreenastheoperationscreen.Switchingbetweenthebuilderscreenandexecutionscreenenablesyoutoconfigureascreenwhilecheckingtheexecutionscreen.
Builder screen Execution screen
RUN PNL soft keyBuilder soft keyFUNC key
Builder ScreenConfigure a screen.
Cursor
Soft key menu
Screen construction area
Status area
If the status area is set to No Display, the screen construction area becomes larger.
Soft Key Menu on the Builder ScreenSoft key menu Description ReferenceTOOL BOX Used to create components. Section1.4
GRID Usedtomakegridsettingsonthebuilderscreen. Section1.3
MOVE Used to move the position of components. Section1.5
RESIZE Usedtochangethesizeofcomponents. Section1.6
PROPERTY Usedtosettheattributionofcomponents. Section1.7,Chapter 2
PASTE Used to copy and paste components.Thisishiddenbeforeyoucopycomponents.
Section1.8
COPY Used to copy components. Section1.8
ORDER Used to set the arrangement (overlapping) of components.
Section1.9
DEPEND Usedtomakethevisibilityofcomponentsdependenton other components.
Section1.10
GR. CTRL Used to manage grouped components. Section1.11
NO MENU Used to temporarily hide the soft key menu. Section1.13
RUN PNL Used to execute and display a configured screen as a custom display.
Section1.13
DELETE Used to delete specified components. Section1.12
ALL DEL Usedtodeleteallspecifiedcomponentsonthebuilderscreen.
Section1.12
UPDATE Used to update a screen registered in external media (CF card).
Section1.13
Chapter 1 Overview and Basic Operations
1-2 IM 04L41B01-04E
Execution ScreenDisplay a configured screen as an operation screen.With the Runtime menu of screen attributes turned Off
With the Runtime menu of screen attributes turned On
ForinformationontheRuntimemenuofscreenattributes,seesection2.1.WhenyouturnOntheRuntimemenuofthescreenattributesinthebuilderscreen,theBuilder and MENU soft keys are displayed in the execution panel. SeeSection2.1:Thesekeysarenotdisplayedinthefactorydefaultsetting.
• Ontheexecutionscreen,youcanexecuteconfiguredactionsbyselectingcomponentswithactionfunctions(switch,pushbutton,COMMIN,andModbusIN)using the up and down arrow keys and pressing DISP/ENTER. The ESC key allows you to unselect components with action functions.
• Theleftandrightarrowkeysallowyoutoswitchthegroupnumberforgroupcontrolforcomponentswiththegroupattribute.
Screen Transition
Builder screen Execution screenPress RUN PNL soft key to transit
Press FUNC > Builder soft key to transit
Select Screen menu by pressing DISP/ENTER to transit
Select Screen menu by pressing DISP/ENTER to transit
Operation screen
Screenconfiguration
Trend, etc.
Forthefirstscreenconfiguration,selectINTERNAL1to3fromthesubmenuofthescreen menu. INTERNAL 1 to INTERNAL 3 are the names of the custom display screens stored in the DX recorder’s internal memory. This screen name is displayed even when notbuildingascreen.
For saving and reading screen data, see Chapter 3.
Precaution regarding the display processing timeCustom display screens that are created can take time to appear. If this is the case, savingofmeasureddataandoutputofcommunicationdatawilloccurcorrectly,butpleasebeawareofthefollowing.• Keyoperationscannotbeperformeduntildisplayprocessingisfinished.• Ifaneventassociatedwithaneventactionoccurs,processingoftheeventcanbe
delayed until the display processing is completed. • Webscreenupdatingcanbeslower.
1.1 Overview
1-3IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
Operation Flow (operation guide)Thissectionbrieflyexplainstheoperationtodisplaythebuilderscreen,thencreatecomponents, and finally display the execution screen. Here, the creation of digital components is taken as an example.Display the builder screen (see section 1.2)
1. PressDISP/ENTER and use any arrow keys to select the [CUSTOM DISPLAY].
2. Use any arrow keys to select one of the submenus,[INTERNAL 1] to [INTERNAL 3], and press DISP/ENTER.
The execution screen appears first.
3. PressFUNC to display the soft key menu, and press the Builder soft key.Thebuilderscreenappears.
Execution screen Builder screen
Create Components (see section 1.4)4. PresstheTOOL BOX soft key and then press the DIGITAL soft key.
The digital component is selected.
5. Use the arrow keytospecifythesizeofadigitalcomponent,andpressDISP/ENTER to confirm.Youmayspecifythesizefromtheorigintowardthelowerright.
Origin
Display the Execution Screen (see section 1.13)6. PresstheRUN PNL soft key.
Theexecutionscreenappears.Togobacktothebuilderscreen,performOperation3.
Builder screen Execution screen
Operationcompleted
1.1 Overview
1-4 IM 04L41B01-04E
1.2 Display the Builder Screen
Procedure1. PressDISP/ENTER.
The screen menu appears.
2. Use the up and down arrow keystoselecttheCUSTOMDISPLAY,andpressthe right arrow key.Thesubmenuappears.
3. Use the up and down arrow keystoselectoneofthesubmenus,[INTERNAL 1] to [INTERNAL 3], and press the DISP/ENTER.The execution screen appears.
4. Use the FUNC to display the Builder soft key on the function menu.
1-5IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
Thebuilderscreenappears.
Note[Builder screen] on the function menu
• Thismightnotbedisplayeddependingontheuserrestrictionsetting.• If key lock is activated, selecting this key will return an error.
ExplanationThe submenushowsscreennamesregisteredintheinternalmemoryandexternalstorage media (CF card).
(1)
(2)
• Submenu(1)showsscreennamesofcustomdisplayregisteredintheinternalmemory.Upto3screenscanberegisteredintheinternalmemory.
• Submenu(2)showsscreennamesofcustomdisplayregisteredinexternalstoragemedia(CFcard).Upto25screenscanberegisteredinaCFcard.
For saving and reading screen data, see Chapter 3.
Note• Youcanchangetheorderofthesubmenusbyusingthemenucustomizationfunction
( IM04L41B01-01E, or IM04L42B01-01E). • WhenloadingacustomdisplayscreencreatedinDXAdvancedR4onaDXAdvancedR3
instrument,componentsandattributesnewlyavailableinR4areignored.
1.2 Display the Builder Screen
1-6 IM 04L41B01-04E
1.3 Set Grid (Cursor Movement Interval)
Cursor moves at defined grid intervals. No grid appears on the screen.
Procedure1. PresstheGRID soft key.
The grid interval menu appears.
2. Pressthesoft keyforagridintervaltobeset.You can move the cursor at the defined grid intervals.
ExplanationRange of Grid SettingYou can select the grid from 1, 5, 10, 20, and 50 dots.
Settingtheupperleft-handcornerofthebuilderscreenasanorigin,thegridissetatdefined dot intervals.Thecursorstopsattheright-handedgeandbottomedgeonthebuilderscreenevenwithout a grid.
Origin
Immediatelyafterchangingthegridsetting,thecursormaynotbepositionedonthegrid.In this case, press one of the left or right arrow keys once and then press one of the up or down arrow keys to stop the cursor on the grid. (The same happens if you press the up or down arrow keys first and then the left or right arrow keys.
Position right after the grid has been changed
Cursor position when you press thedown arrow key after pressing theright arrow key
1-7IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
1.4 Create Components
Fordetailsofeachcomponent,see“Chapter2.AdvancedSettingsofScreenandComponent.”
Procedure1. Use the arrow key to move the cursor to the point where you want to create components.
You may move the cursor after creating components.
2. PresstheTOOL BOX soft key.The soft key menu for each component appears.
3. Pressthesoft keyforcomponentstobecreated.
4. Use the arrow keytomanipulatethecomponentsizeframeanddeterminethesize.Youmaychangethesizeaftercreatingcomponents.• Youcanmanipulatethecomponentsizeframeonlytowardthellower-rightcornerfromtheorigin.
You can adjust the component size by changing the grid option.
Component size frameOrigin
When you press the NO MENU soft key, the menu show at the bottom of the screen will be hidden, which allows you to see the drawing area of the component.
5. PressDISP/ENTER.Components are created.
ExplanationNumber of Components Which Can be Created on One ScreenLimitations exist according to the component type. If you attempt to create components exceedingthenumberofcomponentswhichcanbecreated,anerrormessagewillappear to prevent you from creating components. Errormessage:Cannotcreateobject.Themaximumallowednumberwasexceeded. Numberofcomponentswhichcanbecreatedononescreen:See“IDnumberof
components” on pages 1 to 7.Arrangement OrderComponents are placed to the front in the order of creation time. The last created component is placed in the foreground.
1-8 IM 04L41B01-04E
Component ListThe order of the following parts is the order of soft keys displayed when creating DX recorder parts.
Digital BarYou can set items to display on the vertical andhorizontalaxes.
TrendYou can set items to display on the vertical andhorizontalaxes.
ScaleYou can set items to display on theverticalandhorizontalaxes.
SwitchYou can select from nine different switch types.
LabelYou can specify vertical or horizontaldirection.
Tag(If there is no tag No.)You can specify vertical or horizontaldirection.
Tag No./ Tag Comment(If there is tag No.)You can specify vertical or horizontaldirection.
Simple digital
Simple barYou can set items to display on the vertical andhorizontalaxes.
Alarm markThis component displays an alarm setting point on the simplebargraph.
UnitsYou can specify vertical or horizontaldirection.
Alarm indicator
Span lower limit/ Span upper limit
Message list Alarm List Bitmap
Group nameYou can specify vertical or horizontaldirection.
System iconYou can display information in the status area using icons.
Memory barYou can display the progress of memory sampling of display data or event data in abar.
Time labelYou can specify vertical or horizontaldirection.
Batch group numberYou can specify vertical or horizontaldirection.
Batch nameYou can specify vertical or horizontaldirection.
Line Rectangle
Circle Push button Comment box Comment blockYou can specify vertical or horizontaldirection.
COMM IN Modbus In
1.4 Create Components
1-9IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
ID Number of ComponentsWhenacomponentiscreated,anIDnumberisassignedforidentifyingit.TheIDnumberisassigned in the order of creation and varies depending on the component type as follows:
Component type Component name Update cycle ID number Number of components which can be created on one screen
Components for channel assignment
Digital 1 sec. 0 to 79 80Bar 1 sec.Tag No. NoneTag comment (Tag) NoneSimpledigital 1 sec.Simplebar 1 sec.Alarm mark 1 sec.Unit NoneAlarm indicator 1 sec.SpanL NoneSpanU None
Status display component
SystemiconMemorybarTimelabelBatchgroupnumberBatch nameGroup name
1 sec.1 sec.1 sec.NoneNoneNone
Label components Label NoneComponents with action functions
PushbuttonSwitchCOMMINModbusIn
None
1 sec.1 sec.1 sec.
Components for comment display
CommentboxCommentblock
NoneNone
Components for list display
Alarm listMessage list
1 sec.1 sec.
80 to 83 4
Components for trend display
Trend Display update rate
84 to 87 4
Scale components Scale Measurement interval
88 to 91 4
Diagram components Line None 92 to 131 40Rectangle NoneCircle None
Components for static image display
Bitmap None 132 to 133 2
Component Text String Display RestrictionIf component text strings go outside the display area, the text strings out of the area are not displayed.
Not displayed
Overlapping of ComponentsAsinthefigurebelow,whencomponentsAandBareplacedside-by-sideonthesamegrid,theirsidesoverlapby1dotinwidth.
GridComponent A Component B
1.4 Create Components
1-10 IM 04L41B01-04E
Display When Components Overlap on the Execution ScreenLimitations (A, B, and C) apply when components overlap on the execution screen. If components with the same overlap restriction are overlapping, components placed under thefrontcomponent(i.e.,inthebackground)arenotdisplayed.Overlap restriction Component name (attribute conditions)None Digital,bar,scale(kind:OFF),label,tagNo.,tagcomment,simple
digital,simplebargraph,alarmmark,units,alarmindicator,spanlowerlimit,spanupperlimit,groupname,systemicon,memorybar,timelabel,batchgroupno.,batchname,line,rectangle,circle,pushbutton,switch,commentbox,commentblock,communicationinput,Modbusimput
A Scale(kind:ON)Alarm listMessage list
B(*) Scale(kind:bitmap),bitmapC Trend
* OverlaprestrictionBonlyshowsthefrontcomponentevenonthebuilderscreen.
Forexample,iftwocomponentswithOverlaprestrictionAareoverlappingonthebuilderscreen, only the front component is displayed on the execution screen.
FrontBack
1.4 Create Components
1-11IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
1.5 Move Components
Procedure1. Use the arrow key to place the cursor on the component which you want to
move.
2. PresstheMOVE soft key.Themovementframe(thecomponentframebecomesadashedline: ) is displayed.
3. Use the arrow key to move the movement frame to the point where you want to place a component.
4. PressDISP/ENTER.The component moves to the specified point.
ExplanationSettingtheupperleft-handcornerasanorigin,componentsmoveonthegrid.Componentsdonotgooverthebuilderscreen(configurationarea).Therefore,evenifyoupressthearrowkeyyoumaynotbeabletomovethemovementframe.Inthiscase,makinggridintervalssmallerwillenableyoutomovethemovementframe.
1-12 IM 04L41B01-04E
1.6 Change the Component Size
Procedure1. Use the arrow keytoplacethecursoronthecomponentwhosesizeyouwantto
change.
2. PresstheRESIZE soft key.Thecomponentsizeframe(thecomponentframebecomesadashedline: ) is displayed.
3. Use the arrow keytomanipulatethecomponentsizeframeanddeterminethesize.
4. PressDISP/ENTER.Thecomponentsizeischanged.
ExplanationThe upper left of a component is fixed as origin. The sizechangesrightwardanddownward.
Origin
Resized frame
1-13IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
1.7 Display the Attribute Setting Dialog of Components
Fordetailsofeachcomponent,see“hapter2.AdvancedSettingsofScreenandComponent.”
Procedure1. Use the arrow key to place the cursor on a component.
2. PressthePROPERTY soft key.Thesimpleattributesettingdialogappears.
3. Use the arrow key to select the Details button and press DISP/ENTER.Thedetailattributesettingdialogappears.Using the left and right arrow keys, you can page a dialog with more than one page.
4. Use the arrow key to select the Sync act button and press DISP/ENTER.Thesynchronizeactionattributesettingdialogappears.
ExplanationTheattributesettingdialogboxconsistsofthefollowingthreedialogboxes:Dialog box DescriptionSimple attribute setting Youcansetonlymainattributes.Detail attribute setting Youcansetallattributes.Synchronize action attribute setting
Youcansetthevisibilityofcomponentswhicharesynchronizedwith the alarm or switch.
1-14 IM 04L41B01-04E
1.8 Copy Components (Copy and Paste)
Procedure1. Use the arrow key to place the cursor on the component which you want to copy.
2. PresstheCOPY soft key.
3. Use the arrow key to move the cursor to the point where you want to place a component.
4. PressthePASTE soft key.Copied components are pasted.
ExplanationAllcontentstobecopiedareattributeinformationexcludingtheID,dependID,groupcontrol,andGr.ctrlorder.TheIDnumberisassignedintheorderofcomponentcreation.Ifyouattempttocreatecomponentsexceedingthenumberofcomponentswhichcanbecreated, you cannot copy any component.
If you press the PASTE soft key at the cursor position shown in the lower left figure, a component is placed as the lower right figure shows. A component is placed so that it does not go over the screen.
1-15IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
1.9 Change the Component Arrangement Order
Youcanchangethearrangementofaspecifiedcomponenttothefrontorback.
Procedure1. Use the arrow key to place the cursor on the component whose arrangement
order you want to change.
2. PresstheORDER soft key.Thesoftkeymenu(ToFRONT,ToBACK,ToTOP,ToBOTTOM,BACK)appears.
3. Presstherelevantsoft key.Components are arranged in accordance with the selected soft key.
ExplanationComponents are placed to the front in the order of creation time. The last created component is placed on top.Soft Key Menu ToFRONT:Movetothefrontbyonecomponent. ToBACK:Movetothebackbyonecomponent. ToTOP: Move to the top. ToBOTTOM:Movetothebottom. BACK:Cancelthechangetothearrangementorderandgobacktotheoriginal
screen. (The BACK soft key does not revert any change in component arrangement to the
original arrangement order.)
1-16 IM 04L41B01-04E
1.10 Have the Visibility Attribute of a Component Depend on Another Component
This section explains the operation using the soft key. Itisalsopossibletosetdependencybasedonindividualcomponentsattributes.SeeChapter 2.
Procedure1. Use the arrow key to place the cursor on the component which you want to
subordinate(A).
2. PresstheDEPEND soft key.The soft key menu appears.
(A)(A) (B)(B)
3. PresstheDEPEND soft key.
4. Use the arrow key to place the cursor on the component which is depended on (B).
(A)(A) (B)(B)
5. Press DISP/ENTER.Thevisibilityattributeofthecomponent(A)dependsonthatofthecomponent(B).
To Release Dependency:1. PlacethecursoronthedependingcomponentandthenpresstheDEPEND soft
key.
2. PresstheINDEPEND soft key.Dependency relationship is released.
To Change the Component Which is Depended on:1. PlacethecursoronthedependingcomponentandthenpresstheDEPEND soft
key.The following dialog appears:
2. Select[OK].
3. Use the arrow key to place the cursor on the component which you want to depend on.
4. PressDISP/ENTER.The component which is depended on is changed.
1-17IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
ExplanationAsshowninthebelowfigure,ifwherethevisibilityattributeofcomponent(A)isdependingonthatofcomponent(B),whenyousetthevisibilityattributeofcomponent(B)toOff,thevisibilityattributeofcomponent(A)willbeturnedoffaswell.Inthiscase,onlycomponent(C)willbedisplayedontheexecutionscreen.
Builder screen Execution screen
(A)(A) (B)(B)
(C)(C)
Depending
Thefollowingsectionprovidesexplanationsbyreferringtoacomponentdependingon another component as the “depending component” and a component which is depended on as the “depended component”.If a depended component is subordinated to another component: Ifadependedcomponentissubordinatedtoanothercomponent,theoriginal
dependency relationship is contained in the newly created depending component. In thecaseofthefigurebelow,componentsAandBdependoncomponentC.
Component A
DependingComponent B Component C
Depending
If a depended component is deleted: If a depended component is deleted, its depending component loses the dependency
relationship.Inthecaseofthefigurebelow,ifcomponentBisdeleted,nodependencyrelationshipexistsbetweencomponentCandA.
No dependency Delete
Component A Component B Component C DependingDepending
If an attempt is made to subordinate a depended component to a depending component: Any depended component cannot depend on its depending component. In the case of
thefigurebelow,componentCcannotdependoncomponentAorB.(Nodependencyrelationshipcanbecirculated.)
Component A Component B Component C Depending Depending
Depending is impossible Depending is impossible
1.10 Have the Visibility Attribute of a Component Depend on Another Component
1-18 IM 04L41B01-04E
1.11 Register Components in the GR. CTRL
It is a function that switches the display of components created by each display group. In the Gr. Ctrl dialog, you will be able to list or edit the settings configured by attribute of each component. This section explains the operation using the soft key menu. Youwillconfigurethegroupcontrolbasedonindividualcomponent’sattributes.SeeChapter 2 and Appendix 1.
Procedure1. Pres the Gr. Ctrl soft key.
2. Press the soft key for the Grp control number to be registered.
The Grp control dialog appears.
3. Setthebatchgroupnumber*, group number, and switching groups using the soft key.* The batch group number is displayed when the Multi batch (additional specifications/BT2)isvalid.
When the Multi batch /BT2 is valid
4. Use the right arrow key to display the second page.
5. Enter the ID number for components to be managed as a group.
6. Use the arrow key to select [OK] and press DISP/ENTER.
ExplanationIf components are managed as a group, you can switch channels to be displayed by switching groups on the execution screen with the left and right arrow keys.• You can switch the group number of components which contain the group number as
anattribute(trendandscale).• You can switch the channel number of components which only contain the channel
attribute(channelnumber).Batch group no Settingrange:From1tothenumberofMultibatchesdefinedinthebasicsettingGroup no Settingrange: If the multiple batch is Off, DX1000 is between 1 and 10 and DX2000 is between 1 and 36.
If the multiple batch is On, DX1000 is between 1 and 6 and DX2000 is between 1 and 12.
1-19IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
Switching groups On:Whenyoupresstheleftorrightkeyintheexecutionpanel,thegroupnumber
display switches. Off:Ifyoupresstheleftorrightkeyintheexecutionpanel,thegroupnumberdisplay
does not switch.
Order Itisanorderofchannelconfiguredforeachdisplaygroup.Forexample,if“003,004,
005”isconfiguredfordisplaygroup1,theorder1ofgroupnumber1isCH3,theorder2 corresponds to CH4, and the order 3 corresponds to CH5 respectively.
Settingrange:1to6forDX1000and1to10forDX2000
Hereistheexplanationusingthedisplaygroupsettingandthedialogbelowasanexample.Achannelconfiguredatthefirstchannelinthedisplaygroup1willbeassignedtotheIDregisteredintheorderof(0,6,7,8,9),whichisregisteredattheorder1ofgroupnumber1.You can also switch groups using the left and right arrow keys on the execution screen. (You can switch channels of components registered at the order 1, which is in the order of “1”, “7”, “3”, and “101”.)
Display Group Setting ExampleGroupnumber
Order 1 2 3 41 1 7 3 1012 2 8 5 1023 3 9 8 No setting4 4 10 1 No setting5 5 11 4 No setting6 6 12 7 No setting
Intheboldframe,youwillseechannelsassignedforeachdisplaygroup. If “no setting” is assigned to a component, only the frame is displayed. For example,
onlytheframewillbedisplayedforthecomponent(ID)registeredattheorder3ofgroupnumber4.
Channel 1 is assigned.
Channel 2 is assigned.
Channel 3 is assigned.
Channel 4 is assigned.
Channel 5 is assigned.
Channel 6 is assigned.
1.11 Register Components in the GR. CTRL
1-20 IM 04L41B01-04E
Example for Group Control SettingsInthescreenshowingabargraphofthemeasuredvaluesfrom2channels,themeasured values displayed depend on the display groups as follows: display group 1 = ch 1 and ch 2; display group 2 = ch 3 and ch 4; display group 3 = ch 5 and ch 6; display group 4 = ch 7 and ch 8.
Tag (ID: 0)Simple digital (ID: 2)
Span upper limit (ID: 3)Simple bar (ID: 4)
Span lower limit (ID: 5)
Tag (ID: 1)Simple digital (ID: 6)Span upper limit (ID: 7)Simple bar (ID: 8)
Span lower limit (ID: 9)
Display group 1 shows: Channel 001 Channel 002Display group 2 shows: Channel 003 Channel 004Display group 3 shows: Channel 005 Channel 006Display group 4 shows: Channel 007 Channel 008
• Setup Screen and Setup Items DisplayGroupSettings PressMENU (to switch to setting mode), and select the Menutab>Group set, Trip
line
Group number CH set1 001.0022 003.0043 005.0064 007.008Group 5 and group 6 are set to Off.
1.11 Register Components in the GR. CTRL
1-21IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
Group Control SettingsGroupcontrolissetupintheattributedialogboxesofeachindividualcomponent.Tag(ID:0)attributesettingdialogbox
Uses GR. CRTL 1.Because this component is associated with the first registered channel of each display group, set 1.
ThesettingscanbedisplayedintheGR.CTRL.dialogbox.Theycanalsobeedited.
These are the IDs of the components associated with the channel registered first in each display group. These are the IDs of the components associated with the channel registered second in each display group. Order means the order of channel registrations in the display group settings. In this example, channels 001, 003, 005, and 007 are registered to order 1.
This is the group number displayed when moving to the execution screen. When switching the display group in the execution screen, this number also changes to the displayed group number.
<Operation>By repeatedly pressing the right arrow key, the screen changes in the order: display group1->displaygroup2->displaygroup3->displaygroup4->displaygroup1…andsoon.Pressingtheleftarrowkeychangesthescreensinreverseorder.DisplaygroupsturnedOffinthegroupsettingsdonotappearamongtheswitchedscreens.
1.11 Register Components in the GR. CTRL
1-22 IM 04L41B01-04E
1.12 Delete Components
To delete components, you delete either a specified component (one component) or all components on the screen.
ProcedureTo Delete a Specified Component:
1. Use the arrow key to place the cursor on the component which you want to delete.
2. PresstheDELETE soft key.The confirmation dialog appears.
Kind and ID number of the
component to be deleted
3. Use the arrow key to select [OK] and press DISP/ENTER.The specified component is deleted.
To Delete All Components:
1. PresstheDelete all soft key.The confirmation dialog appears.
2. Use the arrow key to select [OK] and press DISP/ENTER.Allcomponentsonthebuilderscreenaredeleted.
1-23IM 04L41B01-04E
Overview
and Basic O
perations
1
2
3
App
Index
1.13 Other Operations
To Display the Execution Screen: PresstheRUN PNL soft key.
The execution screen appears.
Execution screen Builder screen
To Go Back to the Builder Screen: PressFUNC, and press the Builder soft key.
Ifthescreenattributeruntimemenuison,thesoftkeymenuisdisplayedonthelowerlefthand on the execution screen. Then, press the Builder soft key.
If the screen attribute runtime menu is ON
To Hide the Menu: PresstheNO MENU soft key.
Thesoftkeymenuishiddenandthebottomendofthescreenbecomesvisible.
To show the soft key menu, press ESC.Ifthesoftkeymenuishidden,itisdisabled.
1-24 IM 04L41B01-04E
To Update an Edited Screen:Wheneditingtheinternalmemorydatadisplayedonthecustomscreensubmenu,thescreen data is saved in the internal memory. But if editing data in an external storage medium, if you attempt to move to another screen, a message appears.
For an explanation of data from internal and external storage media, see section 1.2.
Aftereditingthe[Create],or[EXTERNAL1]through[EXTERNAL25]screens,besuretoupdatethescreen.Ifyoudonotupdatethescreen,theediteddatawillbelost.
PresstheUpdate soft key after editing a screen.Ifyoutrytogotoanotherscreenwithoutupdating,theabovecautiondialogappears.Ifyouwanttoupdatethescreen,select“No”togobacktothebuilderscreenbeingedited.
Operations which show the caution dialogOperations DescriptionDISP/ENTER key Displays the screen menuSTART key Memory start action/ start screen displayMENU key Displays the setting menuFUNC key > system information soft key Displays the system information screenFUNC key > network information soft key Displays the network information screenFUNC key > text field soft key Displays the text field screen
Note• Thescreencanbechangedbyusingthecommunicationcommandsorbyusingscreen
changewiththeeventaction/start.However,screendatabeingeditedwillbelost.• IfanyUSBmemoryisinsertedwhileascreenisbeingeditedinexternalstoragemedia(CF
card),theUSBmemoryoperationselectionscreendoesnotappear.• Whiledataisbeingeditedonthebuilderscreen,thefollowingactionsdonotwork:
• Automatic screen recovery• Event action favorite key action• FAVORITEkey(showserrorE157)
1.13 Other Operations
2-1IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.1 Screen Attribute
Thissectionshowsyouhowtoconfigureattributesassociatedwithscreenname,basecolor and runtime menu.
Precedure1. Onthebuilderscreen,placeyourcursorinanareawherethereisnocomponent.
2. PressthePROPERTY soft key.Screenattributesettingdialogappears.
3. Configureeachattribute.
ExplanationThebelowtableshowseachsettingitemanddescription.
Attribute Description Default valueScreen name Thisattributewillbedisplayedinthestatusdisplayonthe
customdisplayscreen.Itwillbedisplayedinthesubmenuofthe screen menu as well.Youcanenterupto16one-bytecharacters.
Base color Youcanconfigurethebackgroundcolorofthescreen.Displaycomponentswithoutanybackgroundcolorwillbefilled with the color configured here.Thecolorsavailableare[Lightgray],[Lightblue],[L.orange],[Aquamarin],[Darkgray],[Darkblue],[Darkgreen],[White],and[Black]
Lightgray
Runtime menu You can choose to show or hide the soft key menu on the executionscreenbysetting[On]or[Off]atthisfield.
Off
Soft key menu displayed on the execution screen[SETPNL] Switchto[Builderscreen].[NOMENU] Temporarily hide the soft key menu.
Pressingthe[ESC]keywillshowthesoftkey menu again.
Status area Sets[On]or[Off]toindicatewhetherornotthestatusareaisdisplayed.Whenthestatusareaissetto[Off],thescreenconstructionareabecomeslarger.Seethefigurebelow.
On
When the status area is [On] When the status area is [Off]
DX1000 (0,24)DX2000 (0,40)
DX1000 (319,239)DX2000 (639,479)
(0,0)
(0,0)
Screenconstructionarea
Chapter 2 Advanced Settings of Screen and Component
2-2 IM 04L41B01-04E
2.2 Common Attributes of Components
Thissectionexplainsthecommonattributesusedformultiplecomponents.
Attribute SettingsTofixthesettingvalue,select[OK]intheattributesettingdialogafteryouhavechangedthesettingsofcomponentattributes.Selection Youwillseeaselection[SET]intheattributesettings.Thisindicatesavalue
configuredatthesettingmenuofthisdevice.Font Thefollowingcharactertypesareavailable.
Font(character size)
Description
Font 5
Englishone-bytecharacters.ISO8859-1(Somesymbolsarenotavailable.)
Font 6Font 8Font 12Font 16Font 32
Batch Group Number (Additional Specification/BT2: Multi batch Functions Only)Thisisanattributeyouwillbeabletoconfigurewithtrendcomponents,scalecomponents,messagelistcomponents,alarmlistcomponents,Multibatchnumbercomponents,batchnamecomponentsandGRCTRL1to4.YoucansetthisattributewhentheMultibatchfunctionisturnedon.Thebatchgroupnumberconfiguredwillbevalidatedwhenyou display a custom display screen in the batch overview mode.Whenyoudisplayacustom display screen in the batch single mode,thebatchgroupnumberconfiguredattheattributewillbeignored.Inthiscase,theeffectivebatchgroupnumberisthatoftheindividualbatchmode.
FrameSettheframeofcomponents.Youcanselect[None],[Black],[White],[Raised],or[Sunken].
None Black White Raised Sunken
[None]:noframe;[Black]:solidlineblackframe;[White]:solidlinewhiteframe;[Raised]:convexshapedframe;[Sunken]:concaveshapedframe
Depend IDSetthecomponentIDonwhichthiscomponentisdependent.Youcansetthisfieldas[None]orselectanIDnumberofthecomponentsonthescreen.Forexample,ifyouhave the following components whose IDs are 0 to 3 on the [Builder screen], the IDs you willbeabletoconfigureareshowninthebelowtable.
ID0123
NoneNoneNoneNone
1230
Configurable ID 23
1
3
2
0ID
Depend on 1
1 2 3
Depend on 2
YoucanalsoconfiguredependentIDsusingthesoftkey.Seesection1.10formoreinformationaboutdependentIDs.
2-3IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
VisibleYou can choose to show or hide the components on the execution screen. On:Showcomponentsontheexecutionscreenandbuilderscreen. Off:Hidecomponentsontheexecutionscreen.Componentswillbevisibleonthe
builderscreen.Youwillnotbeabletochangethissettingifacomponentisdependingonothercomponents.
Group controlYoucanconfiguresettingsofdisplaygroupcontrolstatus.Setting range You can select [None], [GR. CTRL 1], [GR. CTRL 2], [GR. CTRL 3], or [GR. CTRL4]. Youcanalsoconfiguregroupcontrolsettingsusingthesoftkey.Seesection1.11orappendix1formoreinformationaboutgroupcontrol.
Gr.Ctrl order (Group control order)Youcanconfigurethegroupcontrolorder.Thissettingisavailablewhenyousetanythingexcept [None] for the group control.Setting range DX1000 = 1 to 6, DX2000 = 1 to 10 Youcanalsoconfiguregroupcontrolsettingsusingthesoftkey.Seesection1.11formoreinformationaboutgroupcontrol.
Sync act (Synchronize action)Youcanchangetheshow/hidesettingsofcomponentsontheexecutionscreenbysynchronizingOn/Offsettingsofalarmorinternalswitch.Youcanalsoenlargethedisplayoftrendcomponentsandscalecomponentstoanarbitraryspanbyconfiguringthe 2nd span.Depend ID configured will invalidate the visible setting at the synchro attribute field.
Synchro target: Alarm Synchro target: Switch
Attribute Description Default valueSynchro attribute Configuretheattributeyouwanttosynchronize.
YoucanselectNone,Visible,or2ndspan.2ndspanisavailablefortrendcomponentsandscalecomponentsonly.
None
Value (switch On) Configurethesynchroattributevaluewhenthesynchrotarget(alarmorswitch)issettoOn.SelectOnorOff.
On
Synchro target Configurethetargetyouwanttosynchronize.Selectalarmorswitch.
Alarm
Channel noorSwitch no
Configurechannelnumberorinternalswitchnumberyouwanttosynchronize.Ifthesynchrotargetisanalarm,enterachannelnumber.Ifitisaswitch,selectaninternalswitchnumber.
1
Alarm level Configurethealarmlevelyouwanttosynchronize.Selectanyorallofthefollowingsettingrange:1,2,3,4.
1
2.2 Common Attributes of Components
2-4 IM 04L41B01-04E
2nd spanThisistheattributeavailablewithtrendcomponentsandscalecomponentsonly.YoucanenlargethedisplayoftrendandscalebysynchronizingtheOn/Offsettingsofalarmorinternalswitch.Tovalidatethe2ndspan,configure[2ndspan]atthesynchroattributefield.Scaleandtrendshowninthebelowfigureareanexampleofdisplayingthe2ndspanwhenthealarmissettoOn.(Example of settings)
• 2ndspan:On;2ndspanLower:85.0%,2ndspanUpper:100.0%• Synchroattribute:2ndspan;Value(switchOn):On;Synchrotarget:alarm,
Channel no: 1; Alarm level: 1
Alarm set
2nd span
If a measured value exceeds the alarm set,screen shows the enlarged image of this span as the 2nd span.
Configured span
Restrictions on channel assignmentsWiththeMath(/M1)andPROFIBUS-DP(/CP1)options,PROFIBUS-DPalwaysusesthecommunicationinputchannelsinthetablebelow.Thechannelsinthetablebelowcannotbeassignedinacustomdisplay.
Channels used with the /M1 and /CP1 optionType Communication input channels usedDX1000 C01 to C24 (all)DX2000 C01 to C32
2.2 Common Attributes of Components
2-5IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.3 Attributes of Digital Components
These components are associated with displaying digital values. You can display digital value, tag (tag no., tag comment, or channel no.), unit, and alarm display mark.Component type(See Section 1.4.)
Channel assignment Overlap restriction(See Section 1.4.)
None Update cycle
1 sec.
Name of Each Component
Unit
Alarm display mark
Digital value
Tag No. / Tag (Tag comment) / Channel No.
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Channel no Setthechannelnumbertobeassigned.You can configure this field when the group control is set to [None].
1
Digital font Setthecharactersizeofdigitalvalue.You can select [Font 5], [Font 6], [Font 8], [Font 12], [Font 16], or [Font 32].
Font 8(DX1000)Font 12(DX2000)
Channel font Setthecharactersizeoftagno.,tagcomment,andchannel no.You can select [Font 5], [Font 6], [Font 8], [Font 12], or [Font 16].
Font 6(DX1000)Font 8(DX2000)
Unit font Setthecharactersizeofunitfont.You can select [Font 5], [Font 6], [Font 8], [Font 12], or [Font16].Notethatthisfieldwillnotbeavailablewhen[Unitdisplay]fieldissetto[Off].
Font 6(DX1000)Font 8(DX2000)
2 Line display You can choose to display the character strings for channelfontin2linesbysetting[On]or[Off].
Off
Alarm display You can choose to show or hide the alarm display mark bysetting[On]or[Off]atthisfield.Thealarmdisplaymark corresponds to level 1, level 2, level 3, and level 4respectivelyfromthetop.Whenalarmissetto[Off],itisdisplayedinlime.Whenalarmis[On],itwillbedisplayed in a color configured for each level (red, orange, yellow, or pink).
On
Continued on next page
2-6 IM 04L41B01-04E
Attribute Description Default valueUnit display Youcanchoosetoshoworhidetheunitdisplayby
setting[On]or[Off].On
Frame Settheframeofacomponent.SeeSection2.2.
Raised
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].SeeSection2.2.
On
Group control Setthecontrolstatusofgroupdisplayed.SeeSection1.11andSection2.2.
None
Gr.Ctrl order Setthecontrolorderofgroupdisplayed.SeeSection1.11andSection2.2.
1
Sync act SeeSection2.2.
2.3 Attributes of Digital Components
2-7IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.4 Attributes of Bar Graph Components
Thesecomponentsareassociatedwithdisplayingabargraph.Youcandisplaytagno.,tag comment, channel no., span, unit, alarm display mark, and alarm set-point mark.Component type(See Section 1.4.)
Components for channel assignment
Overlap restriction(See Section 1.4.)
None Update cycle
1 sec.
Name of Each Component
Direction: Vertical
Direction: Horizontal
Digital value (only vertical) Unit (only vertical)
Alarm set-point mark
Span value
Alarm display mark (only vertical)
Tag comment (only vertical) (Tag No.: On)
Tag / Channel No. (only vertical) (Tag No.: Off) Tag No. / Channel No. (only vertical) (Tag No.: On)
Attribute Setting DialogWhenTagNo.issettoOn,thefollowingattributesettingdialogsappear.
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Channel no Setthechannelnumbertobeassigned.You can configure this field when the group control is set to [None].
1
Channel font SetthecharactersizeofTagNo.,Tag,orChannelNo.WhentheTagNo.issettoOn,itshowstheTagNo.orChannelNo.WhenTagNo.issettoOff,itshowstheTag or Channel No.You can select [Font 5], [Font 6], [Font 8], [Font 12], or [Font 16].Notethatthisfieldwillnotbeavailablewhenthedirectionissetto[Horizon].
Font 6(DX1000)Font 8(DX2000)
Continued on next page
2-8 IM 04L41B01-04E
Attribute Description Default valueTag font(Displayed only when Tag No. is settoOn.)
Setthecharactersizeoftagcomment.(Availablefonttypesaresameasthoseforchannelfont.)Notethatthisfieldwillnotbeavailablewhenthedirectionissetto[Horizon].
Font 6
Digital font Setthecharactersizeofdigitalvalue.Youcanselect[Font 5], [Font 6], [Font 8], [Font 12], [Font 16], or [Font 32].Notethatthisfieldwillnotbeavailablewhenthedirectionissetto[Horizon].
Font 6(DX1000)Font 8(DX2000)
Unit font Setthecharactersizeofunitfont.(Availablefonttypesaresameasthoseforchannelfont.)Notethatthisfieldwillnotbeavailablewhentheunitdisplayissetto[Off]orthedirectionissetto[Horizon].
Font 5
Span font Setthecharactersizeofspanvalue.(Availablefonttypesaresameasthoseforchannelfont.)Notethatthisfieldwillnotbeavailablewhen[Spandisplay]fieldissetto[Off].
Font 5
Bar color Setthecolorofabar.Youcanselecteither[CHANNEL]or[Green].Ifyouselect[Green]atthissetting,thebarwillbedisplayedinacolorofthealarmwhenthealarmgoes off.
CHANNEL
Base position Setthebasepositionofabargraph.Youcanselect[SET],[Normal],[Center],[Lower],or[Upper].
[SET]
Direction Setthedirectionofabargraph.Youcanselecteither[Vertical]or[Horizon].Thedefaultvaluewilldependontheaspectratioofcomponentsizedrawn.
Depend on the aspect ratio of componentsizeLength≥Width:
VerticalLength<Width:
HorizonAlarm display You can choose to show or hide the alarm display
markbysetting[On]or[Off]atthisfield.Fromleft,itislevel1,2,3,and4respectively.Whenalarmissetto[Off],itisdisplayedinlime.Whenalarmis[On],itwillbedisplayedinacolorconfiguredforeachlevel(red,orange, yellow, or pink).Notethatthisfieldwillnotbeavailablewhenthedirectionissetto[Horizon].
On
Alarm mark display
You can choose to show or hide the alarm set-point markbysetting[On]or[Off]atthisfield.
On
Digital display Youcanchoosetoshoworhidethedigitalvaluebysetting[On]or[Off].
On
Unit display Youcanchoosetoshoworhidetheunitdisplaybysetting[On]or[Off].
On
Span display Youcanchoosetoshoworhidethespandisplaybysetting[On]or[Off].
On
2 Line display You can choose to display the tag (tag comment) in twolinesbysetting[On]or[Off].(Thecharacterstringsforchannelfontwillbedisplayedintwolines.WhentheTagNo.issettoOn,thecharacterstringsfortagfontwillbedisplayedintwolines.)
Off
Frame Settheframeofacomponent.Seepage2-2.
Raised
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent. SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off]. SeeSection2.2.
On
Group control Setthecontrolstatusofgroupdisplayed.SeeSection1.11andSection2.2.
None
Gr.Ctrl order Setthecontrolorderofgroupdisplayed.SeeSection1.11andSection2.2
1
Sync act SeeSection2.2
2.4 Attributes of Bar Graph Components
2-9IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.5 Attributes of Trend Components
These components are associated with displaying a trend. You can select either [Vertical] or[Horizon]forthewavedirection.Component type(See Section 1.4.)
Trend display Overlap restriction(See Section 1.4.)
C Update cycle
Display update rate
Name of Each Component
Message mark
GRID time
Direction: Horizontal Direction: Vertical
Time interval: EveryGridTime interval: Alternate
Margin OnMargin Off
Margin
Attribute Setting Dialog
(*)
* Batch group no. will be displayed only when Multi batch (additional specifcations /BT2) is valid.
2-10 IM 04L41B01-04E
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponentidentification. 84 to 87Batch group no only with additional spec. /BT2
Setthebatchgroupnumber.Thebatchnumberneedstobewithintherangefrom[1]tonumberofMultibatchconfiguredatthebasicsettings. ThebatchgroupnumberwillbedisplayedonlywhenMultibatchisvalid.
1
Group no Setthegroupnumber.Multi batch OffYoucanselectanumberfrom[1]to[10]forDX1000,[1]to[36]forDX2000.Multi batch OnYoucanselectanumberfrom[1]to[6]forDX1000,[1]to[12]forDX2000.
1
Direction Setthedirectionoftrenddisplay.Youcanselect[SET],[Horizon],or[Vertical].
SET
Compress ratio Settheratioofrendering1dotdata.You can select [1], [2], [4], [5], [6], [7], or [8].
1
Wave area Settheratiousedfordisplayingawavetothewidthoftemporalaxisdirectionas100%.You can select [100], [90], [80], [70], [60], or [50].
100
Margin Setswhetherornottodisplayamarginonbothsidesinthedirectionof the span. [On]:Marginof3%ofcomponentwidthisaddedinthedirectionof
the span[Off]:Themarginisnotdisplayed
Off
Change group Setswhetherornottoswitchthegroupdisplayintheexecutionpanel when the left/right keys are pressed. [On]:Displayswitched[Off]:Displaynotswitched
On
Message mark size
Setthesizeofmessagemarktobedisplayed.Youcanselecteither[Small]or[Large].Notethatthisfieldwillnotbeavailablewhen[Messagedisplay]fieldissetto[Off].
Large
Time/div font SetthecharactersizeofTime/divdisplay.Youcanselecteither[Font6]or[Font8].NotethatthisfieldwillnotbeavailablewhenTime/divdisplayissetto[Off].
Font 6(DX1000)Font 8(DX2000)
Time font SetthecharactersizeofGRIDtimedisplay.Youcanselecteither[Font5]or[Font6].Notethatthisfieldwillnotbeavailablewhentimedisplayissetto[Off].
Font 5
Time interval Setstheintervalfordisplayingthetime.Itcannotbesetwhen[Timedisplay]is[Off].[EveryGrid]: Displays in all time grids[Alternate]: Displays in every other time grid
Alternate
2nd span Sets[On]or[Off]toindicatewhetherthe2ndspanisValidorInvalid.Seesection2.2
Off
2nd span Lower Enteravaluebetween0%forthelowerlimitand90%fortheupperlimit,withthedifferencebetweenthe2spansbeing10%orgreater.Seesection2.2
0
2nd span Upper Enteravaluebetween10%forthelowerlimitand100%fortheupperlimit,withthedifferencebetweenthe2spansbeing10%orgreater. Seesection2.2
100
Message display Youcanchoosetoshoworhidethemessagemarkbysetting[On]or[Off].
On
Time/div display YoucanchoosetohideorshowtheTime/divdisplaybysetting[On]or[Off].
On
Time display Sets[On]or[Off]toindicatewhetherornotthegridtimeisdisplayed. OnScale grid display Sets[On]or[Off]toindicatewhetherornotthescalegridis
displayed.When[Timegriddisplay]is[Off],thescalegridisautomaticallysetto[Off],andcannotbeset.
On
Continued on next page
2.5 Attributes of Trend Components
2-11IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default valueTime grid display Sets[On]or[Off]toindicatewhetherornotthetimeisdisplayed.
Whensetto[Off],the[Timedisplay]and[Timefont]itemscannotbeset.
On
Depend ID SettheIDnumberofthecomponentonwhichthiscomponentisdependent.SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].SeeSection2.2.
On
Sync act SeeSection2.2.
Note• Depending on the display method, it may take time until the trend components in created
custom display screens are displayed. To reduce the time, do the following. • IfallchanneldisplayisturnedOn,turnitOff.• If displayed data is compressed along the time axis, lower the compress ratio or reduce
thenumberoftrendcomponents.• Arrangepushbutton,communicationinput,andswitchcomponentssothattheydonot
overlap with trend components. If these components overlap with trend components, cursormovementcanbeslowedwhenselectingthosecomponentsintheexecutionscreen.
• If the compress ratio of a trend component is set to 2 or higher, the trend display phenomenonbelowcanoccur.Thisresultsfromthelimitedcapacityoftheinternalmemory,and does not indicate a malfunction. The data is written to the internal memory. Phenomenon:Whenswitchingtothescreencontainingthetrenddisplay,oldwaveformsare
erased and waveforms are displayed only part way through the data.
2.5 Attributes of Trend Components
2-12 IM 04L41B01-04E
2.6 Attributes of Scale Components
These components are associated with displaying a scale. You can set vertical and horizontaldirection.Component type(See Section 1.4.)
Scale Overlap restriction(See Section 1.4.)
None:TypeOffA:TypeOnB: Type Bitmap
Update cycle
Measurement interval
Component name and indicator type
Direction: HorizontalType: On
Direction: VerticalType: Off
Current position Scale value
UnitScale(Type: On)
Direction: VerticalType: On
Indicator type
MicroNormal
SmallBalanced
No scale margin
With scale margin
Margin
A mark appears if the scales overlap.
Thecurrentpositionmarkwillbedisplayedontheexecutionscreenonly.
Attribute Setting Dialog
If you select here, the read destination directory of the bitmap appears.
(*)
* Batch group no. will be displayed only when Multi batch (addtional specifications /BT2) is valid.
2-13IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponentidentification. 88 to 91Batch group no only with additional spec. /BT2
Setthebatchgroupnumber.Thebatchnumberneedstobebetween[1]andnumberofMultibatchconfiguredatthebasicsettings.ThebatchgroupnumberwillbedisplayedonlywhenMultibatchisvalid.
1
Group no Setthegroupnumber.Multi batch OffYoucanselectanumberfrom[1]to[10]forDX1000,and[1]to [36] for DX2000.Multi batch OnYoucanselectanumberfrom[1]to[6]forDX1000,and[1]to [12] for DX2000.
1
Kind Setthescalekind.[Off]:Thevalueisnotdisplayed.[On]:Scalevalueswillbedisplayedbythenumberof
partitions configured, at previously defined intervals. [Bitmap]:Useabitmapimageforthescale.Iffilesspecified
under[Bmpfilename]cannotbeloaded,thescalethescaleisdisplayedwiththekindsettoOff.
On
Trend direction Setthedirectionofawave.Youcanselect[SET],[Horizon],or [Vertical].
SET
Form SetthesizeofSCALE.Youcanselecteither[Small]or[Large].
Small
Bmp filename Enterthenameofabitmapfilesavedonanexternalstorage medium (CF card).The read destination is the directory used when the screen was loaded.
Bitmap.bmp
Indicator Sethowthecurrentvalueisdisplayed.Youcanselect[SET],[Mark],or[Bar].Notethatthisfieldwillnotbeavailablewhenthetypeissetto[Off].
SET
Indicator type Settheindicatorformatto[Normal],[Micro],[Small],or[Balanced]. See“Partsofthecomponentandindicatortypes”onpage2-12.
Normal
Digit Setthenumberofdigitsforthevaluedisplayedatthescale.Youcanselect[SET],[Normal],or[Fine].YoucansetthisfieldonlywhentheKindissetto[On].
SET
Margin Setswhetherornottodisplayamarginonbothsidesinthedirection of the span. [On]:Displayamarginof3%ofcomponentwidth(orheight)
in the direction of the scale[Off]:Marginnotdisplayed
Off
Change group Setswhetherornottoswitchthegroupdisplayintheexecution panel when the left/right keys are pressed. [On]:Displayswitched[Off]:Displaynotswitched
On
Alarm mark display
Sethowthealarmset-pointmarkisdisplayed.Youcanselect[On],[Off],or[SET].
SET
Alarm mark Setthetypeofalarmset-pointmark.Youcanselect[Alarm],[Fixed],or[SET].
SET
Unit Selectswhetherornottodisplaytheunits.[On]:Unitsdisplayed[Off]:Unitsnotdisplayed
On
2nd span Youcanchoosetovalidateorinvalidatethe2ndspanbysetting[On]or[Off].SeeSection2.2.
Off
2nd span Lower Enteravaluebetween0.0%forthelowerlimitand100.0%fortheupperlimit.Inthiscase,thedifferencebetweenthetwospansneedstobe10.0%orgreater.SeeSection2.2
0.0
Continued on next page
2.6 Attributes of Scale Components
2-14 IM 04L41B01-04E
Attribute Description Default value2nd span Upper Enteravaluebetween0.0%forthelowerlimitand100.0%
fortheupperlimit.Inthiscase,thedifferencebetweenthetwospansneedstobe10.0%orgreater.SeeSection2.2.
100.0
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].SeeSection2.2.
On
Sync act SeeSection2.2.
Note• Todisplaytheindicatorbarandcolorscalebandconfiguredwhenyousetthetypeto[Bitmap],
youwillneedtofillthebackgroundofbitmapwithR:252,G:228,andB:180.• Conditionsforreadingabitmap
(1) Do not compress down to a format of 256 colors or fewer(2)640(width)x480(height)pixelsorfewer(thebitmapcannotbereadifthevalueexceeds
either 640 or 480.)
When scale marks overlap• When selecting [Micro] for the mark format Ifthescalepositionsofmultiplechannelsoverlap,theirmarksoverlap.When
overlapping,marksarestaggeredtopreventtheirpointsfromoverlapping,butwhenthescaleformatis[Small]or[Large]with4ormore,or6ormoremarksrespectively,the points will overlap.
Example of a mark display when the scale type is [Small]
No. of CH: 5No. of CH: 2No. of CH: 3
Overlapping indicators since more than 4 marks at the same positionNo overlapping indicators since 3 or fewer marks at the same position
When indicators overlap at the same position
• When selecting [Small] for the mark format If the scale positions of multiple channels overlap, their marks overlap. If marks
overlap,theyarestaggeredtopreventthechannelnumbersfromoverlapping,butunderthefollowingconditions,thechannelnumbersalsooverlap.• Waveformdirectionis[Vertical],scaleformatis[Large],andthereare4ormore
marks• Waveformdirectionis[Vertical],scaleformatis[Small],andthereare3ormore
marks• Waveformdirectionis[Horizontal]with3ormoremarks
Notethatonly2digitsofthechannelnumberaredisplayed.
2.6 Attributes of Scale Components
2-15IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
• When selecting [Balanced] for the mark format If there are channels of the same scale position, they are assigned with mark formats
ofleft(waveformdirectionvertical),orup(waveformdirectionhorizontal).Inthiscase,ifthenumberofchannelswiththesamechannelpositionis3orless(scaleformat[Small]),or5orless(scaleformat[Large]),itisassignedalternately.
Mark format assignment order (from the left) when the waveform direction is [Vertical]
Mark format assignment order (from the top) when the waveform direction is [Horizontal]
Mark display positions overlapping when the waveform direction is [Vertical] and the scaleformatis[Small]
When marks overlap
2.6 Attributes of Scale Components
2-16 IM 04L41B01-04E
2.7 Attributes of Switch Components
Thesecomponentsareassociatedwithdisplayingaswitch.Youwillbeabletoturntheeventlevelswitch[On]/[Off]ontheexecutionscreen.Component type(See Section 1.4.)
Components with action functions
Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Name of Each Component
Selector Seesaw Lever SlideX SlideY Push Power Connector Toggle
Switch On
Switch Off
Off string
On string
String display Off
To execute the configured action on the execution screen, select a component using the up and down arrow keys and press DISP/ENTER.Iftheconfirmationdialogissetto[On],thefollowingdialogsappearbeforeexecutingtheaction.
Attribute Setting Dialog
2-17IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Style Setthetypeofswitch. Selectablefromamong[Selector],[Seesaw],[Lever],[SlideX],[SlideY],[Push],[Power],[Connector]and[Toggle].(See“nameofeachcomponent”formoreinformation.)
Selector
Event level switch Settheeventlevelswitchnumber.Youcanselectanumberbetween[1]and[30].
1
Action prompt You can choose to display a confirmation dialog when executinganactionbysetting[On]or[Off].
On
Font SetthesizeofOn/Offstrings.Youcanselect[Font5],[Font 6], [Font 8], [Font 12], or [Font 16].
Font 6(DX1000) Font 8(DX2000)
String display Youcanchoosetoshoworhidethestringdisplaybysetting[On]or[Off].
On
Gap Setthecharactergapofthestring.Youcansetavaluebetween0and15.
0
Color Setthecolorofaswitch. Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].
L.brown
On color SetthecolorwhentheswitchisturnedOn.(AvailableOncolorissameasthoselistedinColor.)
Cyan
Off color SetthecolorwhentheswitchisturnedOff.(AvailableOffcolorissameasthoselistedinColor.)
BASE
On string SetthestringwhentheswitchisturnedOn.Youcanenterupto8one-bytecharacters.
ON
Off string SetthestringwhentheswitchisturnedOff.Youcanenterupto8one-bytecharacters.
OFF
Frame Settheframeofacomponent.Seepage2-2.
Raised
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].SeeSection2.2.
On
Sync act SeeSection2.2.
2.7 Attributes of Switch Components
2-18 IM 04L41B01-04E
2.8 Attributes of Label Components
Thesecomponentsareassociatedwithdisplayingalabel.Stringsconfiguredwillbedisplayed.Component type(See Section 1.4.)
Label Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Label display area
Label (string)
Vertical display: On
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Text label Setthestringtobedisplayed.Youcanenterupto64one-bytecharacters.
Label
Font Setthecharactersizeofalabel(string).Youcanselect[Font 5], [Font 6], [Font 8], [Font 12], [Font 16], or [Font 32].
Font 6(DX1000) Font 8(DX2000)
Arrangement Setthehorizontalarrangementofthestring.Youcanselect [Center], [Left], or [Right].
Left
Color Setthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].
Black
Background color Setthefillcolorofthelabeldisplayarea.Selectablefrom among [Red], [Green], [Blue], [B.violet], [Brown], [Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE].and[None].
None
Gap Setsthegapbetweencharactersinatextlabel.Canbesetintherangefrom0to15.
0
Continued on the next page
2-19IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default valueVertical display Setswhetherornottodisplaythetagnumbervertically.
[On]:Rotatesthetextlabel90degreesclockwise.[Off]:Displaysthetextlabelhorizontally.
Off
Frame Settheframeofacomponent.Seepage2-2.
None
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].SeeSection2.2.
On
Sync act SeeSection2.2.
2.8 Attributes of Label Components
2-20 IM 04L41B01-04E
2.9 Attributes of Tag No. Components
These components are associated with displaying Tag No.(SoftkeymenuwillbedisplayedwhenyousettheTagNo.to[Yes]atthebasicsettingmode.)Component type(See Section 1.4.)
Channel assignment Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Tag No. display area
Tag No. (string)
Vertical display: On
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Channel no Setthechannelnumbertobeassigned.You can configure this field when the group control is set to [None].
1
Font SetthecharactersizeofTagNo.Youcanselect[Font5],[Font 6], [Font 8], [Font 12], or [Font 16].
Font 6(DX1000) Font 8(DX2000)
Arrangement Setthehorizontalarrangementofthestring.Youcanselect [Center], [Left], or [Right].
Left
Color Setthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[Channel].
White
Background color Setthefillcolorofthetagno.displayarea.Selectablefrom among [Red], [Green], [Blue], [B.violet], [Brown], [Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],[Channel],and[None].
BASE
Continued on the next page
2-21IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default valueGap Setthecharactergapofthestring.Youcansetavalue
between0and15.0
2 Line display Youcanchoosetodisplaythetagno.intwolinesbysetting[On]or[Off].
Off
Vertical display Setswhetherornottodisplaythetagnumbervertically.[On]:Rotatesthetextlabel90degreesclockwise.[Off]:Displaysthetextlabelhorizontally.
Off
Frame Settheframeofacomponent.SeeSection2.2.
None
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].SeeSection2.2.
On
Group control Setthecontrolstatusofgroupdisplayed.SeeSection1.11andSection2.2.
None
Gr.Ctrl order Setthecontrolorderofgroupdisplayed.SeeSection1.11andSection2.2.
1
Sync act SeeSection2.2.
2.9 Attributes of Tag No. Components
2-22 IM 04L41B01-04E
2.10 Attributes of Tag Comment Components
These components are associated with displaying tag comment (tag).Component type(See Section 1.4.)
Channel assignment Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Tag comment display area
Tag comment (string)
Vertical display: On
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification0 to 79
Channel no Setthechannelnumbertobeassigned.You can configure this field when the group control is set to [None].
1
Font Setthecharactersizeofthetag.Youcanselect[Font5],[Font 6], [Font 8], [Font 12], or [Font 16].
Font 6(DX1000) Font 8(DX2000)
Arrangement Setthehorizontalarrangementofthestring.Youcanselect [Center], [Left], or [Right].
Left
Color Setthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[Channel].
White
Background color Setthefillcolorofthetagcommentdisplayarea.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],[Channel], and [None].
BASE
Continued on the next page
2-23IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default valueGap Setthecharactergapofthestring.Youcansetavalue
between0and15.0
2 Line display You can choose to display the tag comment in two lines bysetting[On]or[Off].
Off
Vertical display Setswhetherornottodisplaythetagcommentvertically.[On]:Rotatesthetextlabel90degreesclockwise.[Off]:Displaysthetextlabelhorizontally.
Off
Frame Settheframeofacomponent.SeeSection2.2.
None
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].SeeSection2.2.
On
Group control Setthecontrolstatusofgroupdisplayed.SeeSection1.11andSection2.2.
None
Gr.Ctrl order Setthecontrolorderofgroupdisplayed.SeeSection1.11andSection2.2.
1
Sync act SeeSection2.2.
2.10 Attributes of Tag Comment Components
2-24 IM 04L41B01-04E
2.11 Attributes of Simple Digital Components
These components are associated with displaying digital values.Component type(See Section 1.4.)
Channel assignment Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Name of Each Component
Digital value
Simple digital display area (Frame: Sunken)
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponentidentification 0 to 79Channel no Setthechannelnumbertobeassigned.Youcanconfigure
this field when the group control is set to [None].1
Font Setthecharactersizeofdigitalvalue.Youcanselect[Font 5], [Font 6], [Font 8], [Font 12], [Font 16], or [Font 32].
Font 6(DX1000) Font 8(DX2000)
Color Setthecolorofdigitalvalue.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[Channel]..
Blue
Alarm color Setthecolorofdigitalvaluewhenthealarmisturnedon.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],[Channel],and[Alarm].
Alarm
Background color Setthefillcolorofdigitalvaluearea.(Backgroundcolorsavailablearesameasthoselistedinalarmcolor.)
BASE
BG transparent Youcanchoosetomakethebackgroundcolortransparentbysetting[On]or[Off].BGcolorwillbecometransparentwhenthesimpledigital completely overlaps the trend display components located underneath. This transparency is invalid if the simple digital protrudes from the trend display component.
Off
Frame Settheframeofacomponent. Seepage2-2. NoneDepend ID SettheIDnumberofthecomponentonwhichthis
component is dependent. SeeSection2.2.None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off]. SeeSection2.2.
On
Group control Setthecontrolstatusofgroupdisplayed.SeeSection1.11andSection2.2.
None
Gr.Ctrl order Setthecontrolorderofgroupdisplayed.SeeSection1.11andSection2.2.
1
Sync act SeeSection2.2.
2-25IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.12 Attributes of Simple Bar Graph Components
Thesecomponentsareassociatedwithdisplayingabargraph.Youcandisplayabargraph and alarm set-point mark.Component type(See Section 1.4.)
Channel assignment Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Name of Each Component
Direction: Vertical
Direction: Horizon
Backgroundcolor: White
Attribute Setting Dialog
Pressing the [+] button increases the number of alarm marks. Pressing the [–] button decreases the number of alarm marks.
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponentidentification. 0 to 79Channel no Setthechannelnumbertobeassigned.Youcan
configure this field when the group control is set to [None].
1
Alarm mark Sethowmanyalarmset-pointmarkswillbedisplayedonasimplebargraph.Youcansetuptofourmarks.
None
Base position Setthebasepositionofabargraph.Youcanselect[SET],[Normal],[Center],[Lower],or[Upper].
SET
Direction Setthedirectionofabargraph.Youcanselecteither[Vertical]or[Horizon].Thedefaultvaluewilldependontheaspectratioofcomponentsizedrawn.
Depend on the aspect ratio of componentsizeLength≥Width:VerticalLength<Width:Horizon
Color scale band Sethowthecolorscalebandisdisplayed.Youcanselect[Off]or[SET].
SET
Color Setthecolorofabar.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[Channel]
Channel
Background color Setthefillcolorofthebargrapharea.(BackgroundcolorsavailablearesameasthoselistedinColor.)
BASE
Continued on next page
2-26 IM 04L41B01-04E
Attribute Description Default valueColor change (alarm on)
Youcanchoosetochangethebarcolorwhenalarmisturnedonbysetting[On]or[Off].
Off
Alarm color Setthebarcolorwhenalarmisturnedon.Selectablefrom among [Red], [Green], [Blue], [B.violet], [Brown], [Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],[Channel],and[Alarm]. You can set this field only when the color changefieldissetto[On].
Alarm
Scale line Youcanchoosetoshoworhidethescalelineofbargraphbysetting[On]or[Off].
On
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].SeeSection2.2.
On
Group control Setthecontrolstatusofgroupdisplayed.SeeSection1.11andSection2.2.
None
Gr.Ctrl order Setthecontrolorderofgroupdisplayed.SeeSection1.11andSection2.2.
1
Sync act SeeSection2.3.
2.12 Attributes of Simple Bar Graph Components
2-27IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attributes of Alarm Set-point Mark ComponentsThissectionexplainsalarmset-pointmarkcomponentsdisplayedinasimplebargraph.Component type(See Section 1.4.)
Channel assignment Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Name of Each Component
Alarm mark
Direction: Vertical
Direction: Horizontal
Attribute Setting Dialog
• The soft key menu for the number of alarm marks will be displayed only when the cursor is positioned here.• When you press the soft key, screen shows the “alarm mark” dialog, which allows you to configure the attribute of each alarm mark.
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification0 to 79
Alarm level Setthealarmlevel.Youcanselectalevelbetween[1]and [4].
1
Style Settheshapeofalarmset-pointmark.Youcanselecteither [Alarm] or [Fixed].
Alarm
Position Setwheretodisplaythealarmset-pointmark.Foraverticalbargraph,youcanselecteither[Left]or[Right].Forahorizontalbargraph,youcanselecteither[Over]or [Under].
Bar graph Vertical: [Right] Horizontal:[Under]
Color change (alarm on)
You can choose to change the color of alarm mark whenalarmisturnedonbysetting[On]or[Off].
On
Mark size Setthesizeofalarmset-pointmark.Youcanselecteither[Small]or[Large].
Large
Color Setsthecolorofthealarmsetpointmark.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[Channel].
Lime
Alarm color Setthecolorofalarmset-pointmarkwhenthealarmison.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[Channel],and[Alarm].
Alarm
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].SeeSection2.2.
On
2.12 Attributes of Simple Bar Graph Components
2-28 IM 04L41B01-04E
2.13 Attributes of Unit Components
These components are associated with displaying a unit.Component type(See Section 1.4.)
Channel assignment Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Unit display area
Unit (string)
Vertical display: On
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponentidentification. 0 to 79Channel no Setthechannelnumbertobeassigned.
You can configure this field when the group control is set to [None].
1
Font Setthecharactersizeofunitfont.Youcanselect[Font5], [Font 6], [Font 8], [Font 12], or [Font 16].
Font 6 (DX1000) Font 8 (DX2000)
Arrangement Setthehorizontalarrangementofthestring.Youcanselect [Center], [Left], or [Right].
Right
Color Setthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[Channel].
White
Background color Setthefillcoloroftheunitdisplayarea.Selectablefrom among [Red], [Green], [Blue], [B.violet], [Brown], [Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],[Channel],and[None].
BASE
Gap Setthecharactergapofthestring.Youcansetavaluebetween0and15.
0
Vertical display Setswhetherornottodisplaytheunitsvertically.[On]:Rotatesthetextlabel90degreesclockwise.[Off]:Displaysthetextlabelhorizontally.
Off
Frame Settheframeofacomponent.SeeSection2.2.
None
Continued on the next page
2-29IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default valueDepend ID SettheIDnumberofthecomponentonwhichthis
component is dependent. SeeSection2.2.None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off]. SeeSection2.2.
On
Group control Setthecontrolstatusofgroupdisplayed. SeeSection1.11andSection2.2.
None
Gr.Ctrl order Setthecontrolorderofgroupdisplayed.SeeSection1.11andSection2.2.
1
Sync act SeeSection2.2.
2.13 Attributes of Unit Components
2-30 IM 04L41B01-04E
2.14 Attributes of Alarm Indicator Components
These components are associated with displaying an alarm indicator.Component type(See Section 1.4.)
Channel assignment Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Name of Each Component
Alarm kind display
Alarm indictor display area
Attribute Setting Dialog
• Select [All] at the alarm level field.
[Change] button appears.
Set the alarm color for each alarm level.
• Select the [Change] button.Alarm color dialog box appears.
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponentidentification. 0 to 79Channel no Setthechannelnumbertobeassigned.Youcan
configure this field when the group control is set to [None].1
Alarm level Setsthealarmleveltobeassigned.Selectablefromamong[1],[2],[3],[4],and[All].Selecting[All]allowsanalarmcolortobesetforeachlevel.
1
Alarm color Setsthecolorwhenthealarmison.Selectablefromamong[Red],[Orange],[Lime],[Yellow],[Pink],[Black],[White],and[Alarm].
Alarm
Color Setsthecolorusedwhenthealarmisoff.Selectablefromamong[Red],[Orange],[Lime],[Yellow],[Pink],[Black],and[White].
Lime
Alarm kind display
Sets[On]or[Off]toindicatewhetherornotthealarmtypeisdisplayed.Setting[On]displaysthealarmtype(symbol)setforeachalarmlevel.
On
Frame Setsthecomponentframe.SeeSection2.2.
Raised
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent. SeeSection2.2.
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off]. SeeSection2.2.
On
Group control Setthecontrolstatusofthedisplaygroup.SeeSection1.11andSection2.2.
None
Gr.Ctrl order Setstheregistrationorderofthedisplaygroup.SeeSection1.11andSection2.2.
1
Sync act SeeSection2.2.
2-31IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.15 Attributes of Span Lower Limit (Span Upper Limit) Components
These components are used to display span lower and upper limits. (Here, the span lower limit is explained. However, this explanation can also apply to the span upper llimit if you replace “lower limit” with “upper limit.”))Component type(See Section 1.4.)
Channel assignment Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Span display area
Span lower limit / Span upper limit (string)
Vertical display: On
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponentidentification. 0 to 79Channel no Setsthechannelnumbertobeassigned.Youcan
configure this field when the group control is set to [None].1
Font Setsthecharactersizeofthelowerlimit(upperlimit)span. You can select [Font 5], [Font 6], [Font 8], [Font 12], or [Font 16].
Font 6(DX1000) Font 8(DX2000)
Arrangement Setsthehorizontalarrangementofthestringinthelowerlimit(upperlimit)spandisplayarea.Selectablefrom [Center], [Left], and [Right].
Left
Color Setthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[Channel].
White
Background color Setsthefillcolorofthespandisplayarea.Selectablefrom among [Red], [Green], [Blue], [B.violet], [Brown], [Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],[Channel]and[None].
BASE
Gap Setsthecharactergapofthestring.Youcansetavaluebetween0and15.
0
Vertical display SetswhetherornottodisplaytheSpanU/SpanLtextlabelvertically.[On]:Rotatesthetextlabel90degreesclockwise.[Off]:Displaysthetextlabelhorizontally.
Off
Frame Setsthecomponentframe.SeeSection2.2.
None
Continued on the next page
2-32 IM 04L41B01-04E
Attribute Description Default valueDepend ID SettheIDnumberofthecomponentonwhichthis
component is dependent. SeeSection2.2.None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed. SeeSection2.2.
On
Group control Setthecontrolstatusofthedisplaygroup.SeeSection1.11andSection2.2.
None
Gr.Ctrl order Setstheregistrationorderofthedisplaygroup.SeeSection1.11andSection2.2.
1
Sync act SeeSection2.2.
2.15 Attributes of Span Lower Limit (Span Upper Limit) Components
2-33IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.16 Attributes of Message List Components
These components are used to display the message list.Component type(See Section 1.4.)
List display Overlap restriction(See Section 1.4.)
A Update cycle
1 sec
Name of Each Component
Header (quantity, title)
Message string Message mark
Attribute Setting Dialog
(*)
* The Batch group no. will be displayed only when Multi batch (additional specification /BT2) is valid.
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.80 to 83
Font Setsthecharactersizeofthemessagelist.Youcanselect either [Font 6] or [Font 8].
Font 6(DX1000) Font 8(DX2000)
Batch group no only with additional spec. /BT2
Setsthebatchgroup number.Selectablefromamongthenumberofmultibatchesconfiguredinthebasicsetting. ThebatchgroupnumberwillbedisplayedonlywhenMultibatchisvalid.
1
Color Setthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].
Black
Background color Setsthefillcolorofthemessagelistarea.Selectablefromamong[white]and[black].
White
BG transparent Youcanchoosetomakethebackgroundcolortransparentbysetting[On]or[Off].Thebackgroundtransparencyisvalidwhenthetrenddisplay component exists under the message list that completely overlaps with it. This transparency is invalid if the message list protrudes from the trend display component.
Off
Header display Sets[On]or[Off]toindicatewhetherornottheheaderisdisplayed.SettingOndisplaysthisitemontheexecutionscreen.Thebuilderscreenalwayshidesthisitem.
Off
Mark display Sets[On]or[Off]toindicatewhetherornotthemessagemarkisdisplayed.SettingOndisplaysthisitemontheexecutionscreen.Thebuilderscreenalways hides this item.
On
Continued on next page
2-34 IM 04L41B01-04E
Attribute Description Default valueTime display Sets[On]or[Off]toindicatewhetherornotthetime
isdisplayed.SettingOndisplaysthisitemontheexecutionscreen.Thebuilderscreenalwayshidesthisitem.
On
NoDate display Sets[On]or[Off]toindicatewhetherornotthedateisdisplayed.SettablewhenthetimedisplayisOn.IfNoDatedisplayissettoOff,thedateappears.
On
Group display Sets[On]or[Off]toindicatewhetherornotthewritegroup is displayed.
Off
User display Sets[On]or[Off]toindicatewhetherornotthewriteuser is displayed.WhenOn,theactionfunctionisaddedtoenablethemessageanduserdisplaystobeswitchedontheexecution screen.
Off
2 Line display Sets[On]or[Off]toindicatewhetherornotthemessage is displayed in two lines.
Off
Frame Setsthecomponentframe.Seepage2-2.
Raised
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed. SeeSection2.2.
On
Sync act SeeSection2.2.
2.16 Attributes of Message List Components
2-35IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.17 Attributes of Alarm List Components
These components are used to display the alarm list.Component type(See Section 1.4.)
List display Overlap restriction(See Section 1.4.)
A Update cycle
1 sec
Name of Each Component
Header (quantity, title)
Alarm level and type Tag comment, Tag No. or Channel No. Alarm event type (mark and string)
Attribute Setting Dialog
(*)
* The Batch group no. will be displayed only when Multi batch (additional specification /BT2) is valid.
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.80 to 83
Font Setsthecharactersizeofalarmlist.Youcanselecteither[Font 6] or [Font 8].
Font 6(DX1000) Font 8(DX2000)
Batch group no only with additional spec. /BT2
Setsthebatchgroup number.Youcanselectanumberfrom [1] to [6] for DX1000, [1] to [12] for DX2000. ThebatchgroupnumberwillbedisplayedonlywhenMultibatchisvalid.
1
Color Setthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].
Black
Background color Setsthefillcolorofthealarmlistarea.Selectablefromamong[white]and[black].
White
Display mode Setsthedisplaymode.Selectablefrom[List]or[Watch].[List] Displays all alarms.[Watch] Displaysthealarmsbeinggenerated.
Displaysthealarmsbeinggenerated,fromamong alarm data (up to 250 data items) retained for internal memory display. If alarms occurfrequently,theyarenotdisplayedeveniftheyarebeinggeneratedsincetheyarediscarded starting with older data.
List
Continued on next page
2-36 IM 04L41B01-04E
Attribute Description Default valueBG transparent Sets[On]or[Off]toindicatewhetherornotthe
backgroundcolorismadetransparent.Thebackgroundtransparencyisvalidwhenthetrenddisplay component exists under the alarm list that completely overlaps with it. This transparency is invalid if the alarm list protrudes from the trend display component.
Off
Header display Sets[On]or[Off]toindicatewhetherornottheheaderisdisplayed.SettingOndisplaysthisitemontheexecutionscreen.Thebuilderscreenalwayshidesthisitem.
Off
Mark display Sets[On]or[Off]toindicatewhetherornotthealarmeventtypeisdisplayed.SettingOndisplaysthisitemontheexecutionscreen.Thebuilderscreenalwayshidesthis item.
On
Lv&Kind display Sets[On]or[Off]toindicatewhetherornotthealarmlevel and type are displayed.
On
Time display Sets[On]or[Off]toindicatewhetherornotthetimeisdisplayed.SettingOndisplaysthisitemontheexecutionscreen.Thebuilderscreenalwayshidesthisitem.
On
NoDate display Sets[On]or[Off]toindicatewhetherornotthedateisdisplayed.SettablewhenTimedisplayisOn.IfNoDatedisplayissettoOff,thedateappears.
Off
2 Line display Youcanchoosetodisplaythetagno.intwolinesbysetting[On]or[Off].
Off
Frame Settheframeofacomponent.SeeSection2.2.
Raised
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed.SeeSection2.2.
On
Sync act SeeSection2.2.
2.17 Attributes of Alarm List Components
2-37IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.18 Attributes of Bitmap Components
Thesecomponentsareusedtodisplayabitmap.Thebitmapcorrespondstotheformathaving256orfewercolors.Bitmapcomponentscanbeusedasscreenbackgrounds,trend grids, and scales of trend components. Component type(See Section 1.4.)
Stillimagedisplay Overlap restriction(See Section 1.4.)
B Update cycle
None
Name of Each Component
Bitmap display area
If the size of bitmap file readgoes over the display area,the images out of the areawill not be displayed.
NoteConditionsforreadingabitmap
(1) Uncompressed format with 256 colors or fewer(2)640(width)x480(height)pixelsorless(thebitmapcannotbereadifthevalueexceeds
either 640 or 480.)• Makesurethatthebitmapimageinformationmeetstheconditions.• Whenusingapaintprogramtocreateabitmap,saveitasamonochrome,16-color,or
256-colorbitmap.
Attribute Setting Dialog
If you select here, the read destination directoryof the bitmap appears.
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.132 to 133
Bmp filename Enterthenameofabitmapfilesavedonanexternalstorage medium (CF card).The read destination is the directory used when the screen was loaded.
Bitmap.bmp
Continued on the next page
2-38 IM 04L41B01-04E
Attribute Description Default valueDisp. on editing Sets[On]or[Off]toindicatewhetherornotthebitmap
isdisplayedonthebuilderscreen.Off
Trend grid mode Sets[On]or[Off]toindicatewhetherornotitshouldact as the grid of the trend component.IfthisitemisturnedOn,whenatrendcomponentIDis specified for a Depend ID, the [Disp. on editing] itemisOn,itsbackgroundturnsgray,anditcannotbeselected.Also,the[Imageprocessing]itemturnsOff,itsbackgroundturnsgray,anditcannotbeselected.IfthisitemisturnedOff,whenatrendcomponentIDisspecifiedforaDependID,thebackgroundsofthe[Disp.on editing] and [Image processing] items turn white, andtheycanbeselected.
Off
Image processing Sets[On]or[Off]toindicatewhetherornottheimageprocessingisconvertedwhenthebitmapfileisread.IfOn,thebitmapfileisoptimizedtothedisplayofthisequipment.However,ittakestimeuntilthebitmapappears.About30secondsisrequiredwhentheimagesizeis640x480pixels
Off
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed.SeeSection2.2.
On
Sync act SeeSection2.2.
Note• If[Imageprocessing]issettoOn,itmaytaketimetodisplaycreatedcustomdisplay
screens.Tosavetime,turnitOff.• Bitmap files are placed in the same directory as custom display screen setting files (.DCD).
Iftheyareinthewrongdirectory,thebitmapswillnotbeabletobedisplayed.• Ifacustomdisplayscreenusingabitmapcomponentiscreatedininternalmemory,display
thebitmapintheexecutionpanelafterthescreeniscreated.Todisplaybitmapslateronthathaveneverbeendisplayedpreviously,theexternalstoragemedia(CFcard)containingthemmustbeinsertedintotheinstrument.
• WhencompletelyoverlappingbitmapcomponentsofthesamesizeandswitchingbetweenthemontheDX,theexternalstoragemedia(CFcard)holdingthosebitmapfilesmustbeinserted into the instrument.
• Itispossibletodisplaybitmapfilesusedincustomdisplayscreenssavedtointernalmemoryevenifthebitmapfilesaresavedtoanexternalstoragemediumthatisnotinserted,butthefollowingconditionsmustbemet. Internalmemorycapacityof400MBormore(checktheMEMORYiteminthesystem
information screen). • Whenloadingscreensormovingfromthebuilderscreentotheexecutionpanel,thebitmap
files in the external storage media (CF card) are copied to the internal memory. Be sure to saveallbitmapfilesbeingusedinthescreentotheexternalstoragemedia(CFcard).Whendisplaying custom display screens saved to internal memory, an error message appears if specifiedbitmapfilesarenotfound.
• Evenifbitmapfilesarespecifiedintheattributes,anerrormessagedoesNOTappearifthebitmapfilesarenotpresentduringacopyoperation.Checktheattributesforthepresence/absenceofbitmapfiles.
2.18 Attributes of Bitmap Components
2-39IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.19 Attributes of Group Name Components
Thiscomponentdisplaysthegroupnamecorrespondingtothespecifiedgroupnumber.Ifyouwanttodisplaycomponentsinacustomdisplayofnotonlythesamegroupbutofseveralgroups,orifyousetthestatusareatoNodisplayandtherebyeliminatethegroup name, you can create this group name component to display group names.Component type(See Section 1.4.)
Statusdisplaycomponent
Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Group name
Component area
If you set Change group to On in the property settings, the group name changes when you press the left/right arrow keyson the execution panel.
Vertical display
Attribute settings dialog box
(*)
* The Batch group no. will be displayed only when Multi batch (additional specification /BT2) is valid.
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Batch group no only with additional spec. /BT2
Setsthebatchgroupnumber.Youcanselectanumberfrom [1] to [6] for DX1000, [1] to [12] for DX2000. ThebatchgroupnumberwillbedisplayedonlywhenMultibatchisvalid.
1
Group no Setthegroupnumber.Multi batch OffYoucanselectanumberfrom[1]to[10]forDX1000,[1]to [36] for DX2000.Multi batch OnYoucanselectanumberfrom[1]to[6]forDX1000,[1]to [12] for DX2000.
1
Font SetthesizeofOn/Offstrings.You can select [Font 5], [Font 6], [Font 8], [Font 12], or [Font 16].
Font 6(DX1000) Font 8(DX2000)
Color Setthecolorofagroupnamefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].[Backgroundcolor]:Thebasecolorsetforthescreen.
Black
Continued on the next page
2-40 IM 04L41B01-04E
Attribute Description Default valueBackground color Setthecolorofthegroupname.
Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].[Backgroundcolor]:Thebasecolorsetforthescreen..
None
Change group Setswhetherornottoswitchthegroupdisplayintheexecution panel when the left/right keys are pressed.
On
Arrangement Setthehorizontalarrangementofthestring.You can select [Center], [Left], or [Right].
Left
Gap Setsthecharactergapofthestring.Youcansetavaluebetween0and15.
0
2 Line display Sets[On]or[Off]toindicatewhetherornottogroupname in 2 lines with word-wrapping.
Off
Vertical display Setswhetherornottodisplaythegroupnamedisplayvertically.[On]:Rotatesthetextlabel90degreesclockwise.[Off]:Displaysthetextlabelhorizontally.
Off
Frame Setthecomponentframe.Seesection2.2
None
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.Seesection2.2
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].Seesection2.2
On
Sync act Seesection2.2
2.19 Attributes of Group Name Components
2-41IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.20 System Icon Component Attributes
You can create a system icon for display in the status area. You can create icons that displayonlytheitemsyouwishinthescreen,andthesecanbeusedwhennotdisplayingthe status area. Component type(See Section 1.4.)
Statusdisplaycomponent
Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Parts of the component and kinds of icons
Component frame
The size of the icon component frame is set under Icon size in the attribute settings.
Memory sampleAlarm
CF cardMath*1
Key lock
EmailStatus
Key lock & emailUserLock*2
UserLock & status*2*1 Can only be selected with the Math option *2 Can only be selected with the /AS1 option
Attribute settings dialog box
List of AttributesAttribute Description Default valueID Thisnumberisautomaticallyassignedtoidentifythecomponents. 0 to 79Size Selectasystemiconsizeof[24]or[32]. 24 (DX1000)
32 (DX2000)Type Selectasystemiconkindof[Memory sample], [Alarm], [CF card],
[Math], [Key lock], [Email], [Status],[Key & email]*, [UserLock], or [User & status]*.* [Key & email] is the icon for [Key lock & email].
[User & status] is the icon for [UserLock & status].
Alarm
Background color Setabackgroundcolortousewithinthecomponentframe.You can select a color of: [Red], [Green], [Blue], [B.violet], [Brown], [Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],or[Backgroundcolor].
Background color
BG transparent Turnsthebackgroundtransparency[On]/[Off].Thebackgroundtransparencyisvalidwhenatrenddisplaycomponent exists under the system icon that completely overlaps with it. The transparency is invalid if the system icon component protrudes from the trend display component.
Off
Frame Setthecomponentframe. Seesection2.2
None
Depend ID SettheIDnumberofthecomponentonwhichthiscomponentisdependent. Seesection2.2
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off]. Seesection2.2
On
Sync act Seesection2.2
2-42 IM 04L41B01-04E
2.21 Attributes of Memory Bar Components
This component appears in the status area and shows the progress of memory sampling. ThewidthoftheMemorybarcomponentframerepresentsthefilesaveinterval(displaydata) or data length (event data), and shows the remaining time for memory sampling. Component type(See Section 1.4.)
Statusdisplaycomponent
Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Parts of the component
File save interval (for display data), or data length (for event data)
BackgroundBar
Remaining memory sample time For event data, the status is displayed as a text label.
Attribute settings dialog box
(*)
* The Batch group no. will be displayed only when Multi batch (additional specification /BT2) is valid.
List of AttributesAttribute Description Default valueID Thisnumberisautomaticallyassignedtoidentifythe
components.0 to 79
Batch group no only with additional spec. /BT2
Setsthebatchgroupnumber.Youcanselectanumberfrom[1]to[6]forDX1000,[1]to [12] for DX2000. ThebatchgroupnumberwillbedisplayedonlywhenMultibatchisvalid.
1
Data type Selectadatatypeof[Display]or[Event]todisplayintheMemorybar.Notethatthiscanonlybeselectedwhenthebasicsettingmodememorydatatypeissetto Event + display. If the data type is set to Display or Event,itcannotbeselected,andrevertstothedatatype setting.
Display (or Event when the memory type of Basic setting mode is Event)
Direction Setsthedirectionofbargraphs.Youcanset[Vertical]or[Horizontal].Thedefaultvaluediffersdependingonthevertical-to-horizontalsizeratiooftheplottedcomponent.A[Vertical]barexpandsverticallyfrombottomtotop.A[Horizontal]barexpandshorizontallyfromlefttoright.
Depends on the vertical-to-horizontalratioVert≥Horiz:VertVert<Horiz:Horiz
Rem. time display Sets[On]or[Off]toindicatewhetherornottodisplaythe remaining sampling time in the Rem. time display Memorybar.
Off
Continued on the next page
2-43IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default valueColor Setthecolorofabar.
You can select a color of: [Red], [Green], [Blue], [B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],or [Background color].[Backgroundcolor]:Thebasecolorsetforthescreen.
Lime
Background color Setsabackgroundcolor.(Backgroundcolorsavailablearesameasthoselisted in Color.)
Background color
Color(pre-Trig) Selectthecolorofthebarduringatriggerwait.(The choices for Color(pre-Trig) are the same as those for Color.)Itcannotbeselectedinthefollowingcases.•WhenthedatatypeisDisplaydata•WhenthedatatypeisEventdata,andtheevent
data mode is Free
Orange
Font Setthefontforthetextlabelthatshowstheremainingtime or event data status.Selectfrom[Font5],[Font6],[Font8],[Font12],or[Font16]. Itcannotbeselectedinthefollowingcases.•WhentheRem.timedisplayisOffandthedatatype
is Display data•WhentheRem.timedisplayisOff,thedatatypeis
Event data, and the mode is Free
Font 5
String color Setthedisplaycolorforthetextlabelthatshowstheremaining time or the event data status. (The choices of string color are the same as those for Color.) Selectionisunavailableunderthesameconditionsasfor the Font item.
Black
Frame Setthecomponentframe.Seesection2.2
None
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.Seesection2.2
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off].Seesection2.2
On
Sync act Seesection2.2
2.21 Attributes of Memory Bar Components
2-44 IM 04L41B01-04E
2.22 Attributes of Time Label Components
This component displays the current date and time. You can create this date and time component if setting the status area to No display eliminates the date and time. Component type(See Section 1.4.)
Statusdisplaycomponent
Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Parts of the component
Time
Background
Date
Vertical display
Attribute settings dialog box
List of AttributesAttribute Description Default valueID Thisnumberisautomaticallyassignedtoidentifythe
components.0 to 79
Font Setthecharactersizeofcurrentdateandtime.You can select [Font 5], [Font 6], [Font 8], [Font 12], or [Font 16].
Font 6(DX1000) Font 8(DX2000)
Arrangement Setthehorizontalarrangementofthestring.You can select [Center], [Left], or [Right].
Left
Color Setthecolorofthecurrentdateandtime.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].[Backgroundcolor]:Thebasecolorsetforthescreen.
Black
Background color Setsabackgroundcolor.(Thechoicesforthebackgroundcolorarethesameasthose for Color, plus [None].)
BASE
BG transparent Turnsthebackgroundtransparency[On]/[Off].WhenOn,framesinthebuilderscreenareshownwithdottedlinesindicatingthetransparentbackground.Thebackgroundtransparencyisvalidwhenatrenddisplaycomponentexistsunderthedatetimelabelcomponent that completely overlaps with it. The transparencyisinvalidifthetimelabelcomponentprotrudes from the trend display component.
Off
Gap Setthecharactergapofthestring.Youcansetavaluebetween0and15.
0
Continued on the next page
2-45IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default value2 line display Sets[On]or[Off]toindicatewhetherornottodisplay
timeanddatetextlabelsin2lineswithword-wrapping.ThiscannotbesetifNoDatedisplayis[On]orTimedisplayis[Off].
Off
NoDate display Setswhetherornottodisplaythedate.[On]Datenotdisplayed.[Off]Datedisplayed.
Off
Year display form Selectstheyeardisplayformat.[None]: The year is not displayed. [4digits]: The year is displayed in the format yyyy. [2digits]: The year is displayed in the format yy.
[4digits]
Time display Sets[On]or[Off]toindicatewhetherornotthetimeisdisplayed. ThiscannotbesetifNoDatetimedisplayis[On].
On
Second display Sets[On]or[Off]toindicatewhetherornottheseconds are displayed. TheseconddisplaycannotbeselectedifTimedisplayissettoOff.
On
Vertical display SetswhetherornottodisplaytheTimedisplayvertically. [On]:Rotatesthetextlabel90degreesclockwise.[Off]:Displaysthetextlabelhorizontally.
Off
Frame Setthecomponentframe. Seesection2.2
None
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent. Seesection2.2
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off]. Seesection2.2
On
Sync act Seesection2.2
2.22 Attributes of Time Label Components
2-46 IM 04L41B01-04E
2.23 Attributes of Batch Group Number Components
ThiscomponentdisplaysthebatchgroupnumberforMultiBatch.You can create this group name component if setting the status area to No display eliminatesthebatchgroupnumber.WhenMultiBatchisOff,batchgroupnumbercomponentscannotbecreatedandtheirattributescannotbeedited.Component type(See Section 1.4.)
Statusdisplaycomponent
Overlap restriction(See Section 1.4.)
None Update cycle
None
Parts of the component
Batch group number
BackgroundVertical display
Attribute settings dialog box
(*)
* The Batch group no. will be displayed only when Multi batch (additional specification /BT2) is valid.
List of AttributesAttribute Description Default valueID Thisnumberisautomaticallyassignedtoidentifythe
components.0 to 79
Batch group no only with additional spec. /BT2
Setsthebatchgroupnumber.Youcanselectanumberfrom[1]to[6]forDX1000,[1]to [12] for DX2000. ThebatchgroupnumberwillbedisplayedonlywhenMultibatchisvalid.
1
Font Setsthefontofthetextlabelshowingthebatchgroupnumber.Selectfrom[Font5],[Font6],[Font8],[Font12],or[Font16].
Font 6(DX1000) Font 8(DX2000)
Color Setsthecolorofthestringshowingthebatchgroupnumber.You can select a color of: [Red], [Green, [Blue], [B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],or [Background color]. [Backgroundcolor]:Thebasecolorsetforthescreen.
Black
Background color Setsabackgroundcolor.(Thechoicesforthebackgroundcolorarethesameasthose for Color, plus [None].)
None
Disp.in BTOverview
WhenthedisplayedscreenisinBTOverviewmode,sets[On]or[Off]toindicatewhetherornottodisplaythebatchgroupnumber.
On
Text label arrangement
Setsthehorizontalarrangementofthetextlabel.You can select [Center], [Left], or [Right].
Center
Gap Setsthegapbetweencharactersinatextlabel.Canbesetintherangefrom0to15.
0
Continued on the next page
2-47IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default valueVertical display Setswhetherornottodisplaythebatchgroupnumber
vertically. [On]:Rotatesthetextlabel90degreesclockwise.[Off]:Displaysthetextlabelhorizontally.
Off
Frame Setthecomponentframe. Seesection2.2
None
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent. Seesection2.2
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off]. Seesection2.2
On
Sync act Seesection2.2
2.23 Attributes of Batch Group Number Components
2-48 IM 04L41B01-04E
2.24 Attributes of Batch Name Components
Thiscomponentdisplaysthebatchname.YoucancreatethisbatchnamecomponentifsettingthestatusareatoNodisplayeliminatesthebatchname.Thecomponentdisplaysthebatchname,batchnumber,andlotnumberseparatedbyhyphens.ThebatchandlotnumbersshowninthecomponentaretheonesinthedialogboxthatappearwhenyoupresstheFUNC key followedbytheBatch soft key. WhenBatchisOff,batchnamecomponentscannotbecreatedandtheirattributescannotbeedited.Component type(See Section 1.4.)
Statusdisplaycomponent
Overlap restriction(See Section 1.4.)
None Update cycle
None
Parts of the component
Vertical displayBatch name
Background
Lot numberBatch number
Attribute settings dialog box
(*)
* The Batch group no. will be displayed only when Multi batch (additional specification /BT2)
List of AttributesAttribute Description Default valueID Thisnumberisautomaticallyassignedtoidentifythe
components.0 to 79
Batch group no only with additional spec. /BT2
Setsthebatchgroupnumber.Youcanselectanumberfrom[1]to[6]forDX1000,[1]to [12] for DX2000. ThebatchgroupnumberwillbedisplayedonlywhenMultibatchisvalid.
1
Font Setsthefontofthetextlabelshowingthebatchname.Selectfrom[Font5],[Font6],[Font8],[Font12],or[Font16].
Font 6(DX1000) Font 8(DX2000)
Color Setsthecolorofthestringshowingthebatchname.You can select a color of: [Red], [Green, [Blue], [B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],or [Background color]. [Backgroundcolor]:Thebasecolorsetforthescreen.
Black
Background color Setsabackgroundcolor.(Thechoicesforthebackgroundcolorarethesameasthose for Color, plus [None].)
Background color
Arrangement Setsthehorizontalarrangementofthetextlabel.You can select [Center], [Left], or [Right].
Left
Continued on the next page
2-49IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default valueGap Setsthegapbetweencharactersinatextlabel.
Canbesetintherangefrom0to15.0
2 line display Sets[On]or[Off]toindicatewhetherornottobatchnumberandlotnumberin2lineswithword-wrapping.
Off
Vertical display SetswhetherornottodisplaytheTimedisplayvertically. [On]:Rotatesthetextlabel90degreesclockwise.[Off]:Displaysthetextlabelhorizontally.
Off
Frame Setthecomponentframe. Seesection2.2
None
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent. Seesection2.2
None
Visible Youcanchoosetoshoworhidethiscomponentbysetting[On]or[Off]. Seesection2.2
On
Sync act Seesection2.2
2.24 Attributes of Batch Name Components
2-50 IM 04L41B01-04E
2.25 Attributes of Line Components
These components are used to display a line. A line connecting any two points is displayed.Component type(See Section 1.4.)
Shape Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
You can draw a line going in the left/right or up/down direction from an origin.Origin
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.92 to 131
Line kind Setslinetype.Selectablefromamong[Solid],[Dotted],[Dashed], and [Longdash].
Solid
Line color Setsthecolorofaline.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].
Black
Trend grid Sets[On]or[Off]toindicatewhetherornotitshouldact as the grid of the trend component dependent on the trend grid. [On]:Plottedasthegridforthetrendcomponentof
the Depend ID. Even when placed in front of the trend component, the portions that do not overlap with the trend component are not displayed.
[Off]:Displayedaslines.
Off
Depend ID SettheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed.Thiscannotbesetifadependentcomponentisset.SeeSection2.2.
On
Sync act SeeSection2.2.
2-51IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.26 Attributes of Rectangle Components
These components are used to display a rectangle.Component type(See Section 1.4.)
Shape Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Origin
You can draw a rectangle from an origin toward the lower right.
Background color
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.92 to 131
Line color Setsthecolorofaline.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[None].
Black
Background color Setsthebackgroundcolor.(Backgroundcolorsavailablearesameasthoselistedin Line color.)
None
Line kind Setslinetype.Selectablefromamong[Solid],[Dotted],[Dashed], and [Longdash].
Solid
Depend ID SetstheIDnumberofthecomponentonwhichthiscomponent is dependent. SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed.SeeSection2.2.
On
Sync act SeeSection2.2.
2-52 IM 04L41B01-04E
2.27 Attributes of Circle Components
These components are used to display a circle..Component type(See Section 1.4.)
Shape Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Origin
You can draw a circleinscribed in a square.
Background color
You can draw a circle from an origin toward the lower right.
You can draw a circle ina rectangle. However,you will not be able todraw an ellipse.
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification92 to 131
Line color Setsthecolorofaline.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[None]
Black
Background color Setsthebackgroundcolor.(Backgroundcolorsavailablearethesameasthoselisted in Line color.)
None
Depend ID SetstheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed.SeeSection2.2.
On
Sync act SeeSection2.2.
Plotting example
When you set the background color without a line color after you have drawn a circle or rectangle, the drawings appear to be connected.Combining the settings of line color and background color allows you to draw a more complex image.
2-53IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.28 Attributes of Push Button Components
Thesecomponentsareusedtodisplayapushbutton.Usingtheactionfunctionallowstheeventedgeswitchtobeswitchedontheexecutionscreenasshowninthefigurebelow.
Component type(See Section 1.4.)
Components with action functions
Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Background color 1
0String
Event edge switch
Action execution
To execute the configured action on the execution screen, select a component using the up and down arrow keys and press DISP/ENTER.
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Event edge switch
Setstheeventedgeswitchnumber.Selectablefrom[1]and [30].
1
String Youcanenterupto64one-bytecharacters,asthestringtobedisplayedonthebutton.
PushButton
Confirm dialog Sets[On]or[Off]toindicatewhetherornottheconfirmation dialog is displayed during action execution.
On
Font Setscharactersize.Selectablefrom[Font5],[Font6],[Font 8], [Font 12], [Font 16], and [Font 32].
Font 6(DX1000) Font 8(DX2000)
Arrangement Setsthehorizontalarrangementofthestringtobedisplayedonthebutton.Selectablefrom[Center],[Left], and [Right].
Center
Color Setthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].
Black
Continued on next page
2-54 IM 04L41B01-04E
Attribute Description Default valueBackground color Setsthebackgroundcolor.
Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[None].
BASE
Depend ID SetstheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed.SeeSection2.2.
On
Sync act SeeSection2.2.
2.28 Attributes of Push Button Components
2-55IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.29 Attributes of Comment Box Components
Thesecomponentsareusedtodisplayacommentbox.YoucandisplaythestringbyspecifyingthecommentboxnumberconfiguredfortheDXmainunit.Component type(See Section 1.4.)
Comment display Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Strings
Background color
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Comment box no Setsthecommentboxnumber.1 to 100 for DX1000 and 1 to 200 for DX2000
1
Font Setsthecharactersize.Selectablefrom[Font5],[Font6],[Font8],[Font12],and [Font 16].
Font 6(DX1000) Font 8(DX2000)
Gap Setsthecharactergapofthestring.Settableintherangeof0to15.
0
Arrangement Setsthehorizontalarrangementofthestring.Selectablefrom[Center],[Left],and[Right].
Left
Color Setsthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].
Black
Background color Setsthebackgroundcolor.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[None].
BASE
Frame Setsthecomponentframe.Seepage2-2.
Black
Depend ID SetstheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed.SeeSection2.2.
On
Sync act SeeSection2.2.
2-56 IM 04L41B01-04E
2.30 Attributes of Comment Block Components
Thesecomponentsareusedtodisplayacommentblock.YoucandisplaythestringbyspecifyingthecommentblocknumberconfiguredfortheDXmainunit.Component type(See Section 1.4.)
Comment display Overlap restriction(See Section 1.4.)
None Update cycle
None
Name of Each Component
Strings
Background color
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Comment block no
Setsthecommentblocknumber.1 to 50 for DX1000 and 1 to 100 for DX2000
1
Font Setsthecharactersize.Selectablefrom[Font5],[Font6],[Font8],[Font12],and [Font 16].
Font 6(DX1000) Font 8(DX2000)
Gap Setsthecharactergapofthestring.Selectableintherange of 0 to 15.
0
Arrangement Setsthehorizontalarrangementofthestring.Selectablefrom[Center],[Left],and[Right].
Left
Color Setthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].
Black
Continued on next page
2-57IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
Attribute Description Default valueBackground color Setsthebackgroundcolor.
Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],[BASE],and[None].
BASE
Line space Setsthelinespaceofthestring.Youcansetavaluebetween0and15.
0
Frame Setsthecomponentframe.SeeSection2.2.
Black
Depend ID SetstheIDnumberofthecomponentonwhichthiscomponent is dependent.SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed.SeeSection2.2.
On
Sync act SeeSection2.2.
2.30 Attributes of Comment Block Components
2-58 IM 04L41B01-04E
2.31 Attributes of Communication Input Components
These components are used to write values to the communication channel. Using the action functionenablesnumericvaluestobewrittentothespecifiedcommunicationchannelontheexecutionscreen.ThevaluewrittencanbereadfromotherdevicesusingModbusfunction.Whenyouassignthecommunicationchanneltothecomputationchannel,youwillalsobeabletowriteanarbitraryvaluetootherdevicesusingModbusfunction.Component type(See Section 1.4.)
Components with action functions
Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Name of Each Component
The character/value input window shown on the right will appear when you press DISP/ ENTER after selecting the communication input components using the up and down arrow keys on the execution screen.
Communication input value
Background color
Attribute Setting Dialog
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponentidentification. 0 to 79Commu data no Setsthecommunicationinputdatanumberforenteringand
displaying a value.1
Font Setsthecharactersize.Selectablefrom[Font5],[Font6],[Font8], [Font 12], [Font 16], and [Font 32].
Font 6(DX1000) Font 8(DX2000)
Arrangement Setsthehorizontalarrangementofthestring.Selectablefrom[Center], [Left], and [Right].
Right
Color Setsthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].
Black
Background color Setsthebackgroundcolor.(Backgroundcolorsavailablearesame as those listed in Color.)
White
Minimum Setstheminimumvaluethatcanbeinputforthelowerlimit. -9.9999E+29Maximum Setsthemaximumvaluethatcanbeinputfortheupperlimit. 9.9999E+29Depend ID SetstheIDnumberofthecomponentonwhichthiscomponent
is dependent. SeeSection2.2.None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponentisdisplayed. SeeSection2.2.
On
Sync act SeeSection2.2.
NoteMaximum and Minimum are valid only when a value is entered from the communication inputcomponentofthecustomdisplay.Theseattributesdonotinfluencetheinputfromcommunication.
2-59IM 04L41B01-04E
Advanced Settings of Screen and C
omponent
1
2
3
App
Index
2.32 Attributes of Modbus In Components
Createsacomponentthatdisplaystheinputvalueofthecommunicationchannelsetbythespecifiedsendcommandnumber,andthatwritestemperaturecontrollerandotherSPvalues.Normally, it displays the communication input value. Ifanactionfunctionisexecuted,valuescanbewrittenfromacustomdisplayscreentocommunication channels. WrittenvaluesarewrittentoregistersofaconnecteddevicethroughspecifiedModbussend commands. Component type(See Section 1.4.)
Components with action functions
Overlap restriction(See Section 1.4.)
None Update cycle
1 sec
Parts of the component
Comm. In
Background color
After pressing the Up/Down arrow keys to select the Comm In component in the execution panel, you can press the DISP/ENTER key to display a character/number input window on the right.
Attribute settings dialog box
List of AttributesAttribute Description Default valueID Numberautomaticallyassignedforcomponent
identification.0 to 79
Communication Selectsacommunicationkindof[Ethernet]or[Serial]. EthernetCommand no. SetstheModbussendcommandnumberspecified
under Communication. Range: [1] to [16]
Font SetthecharactersizeoftheModbusinput.Selectablefrom[Font5],[Font6],[Font8],[Font12],[Font 16], and [Font 32].
Font 6(DX1000) Font 8(DX2000)
Arrangement Setsthehorizontalarrangementofthestring.Selectablefrom[Center],[Left],and[Right].
Right
Color SetsthecolorofthestringshowingtheModbusinput.Setsthecolorofthestring.Selectablefromamong[Red],[Green],[Blue],[B.violet],[Brown],[Orange],[Y.green],[Lightblue],[Violet],[Gray],[Lime],[Cyan],[Darkblue],[Yellow],[Lightgray],[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],[Darkcyan],[S.green],[Black],[White],and[BASE].[Backgroundcolor]:Thebasecolorsetforthescreen.
Black
Background color Setsthebackgroundcolor.(Backgroundcolorsavailablearesameasthoselistedin Color.)
White
Continued on the next page
2-60 IM 04L41B01-04E
Attribute Description Default valueMinimum Setsthelowerlimitofthenumericalvaluethatcan
beinputfortheminimum.Ifavaluelargerthanthemaximum is set, the maximum takes the same value as the minimum. Selectablerange:-9.9999E+29to-1.0000E-30
0 1.0000E-30 to 9.9999E+29
-9.9999E+29
Maximum Setstheupperlimitofthenumericalvaluethatcanbeinput.If a value smaller than the minimum is set, the minimum takes the same value as the maximum. Selectablerange:-9.9999E+29to-1.0000E-30
0 1.0000E-30 to 9.9999E+29
9.9999E+29
Depend ID SetstheIDnumberofthecomponentonwhichthiscomponent is dependent. SeeSection2.2.
None
Visible Sets[On]or[Off]toindicatewhetherornotthiscomponent is displayed. SeeSection2.2.
On
Sync act SeeSection2.2.
2.32 Attributes of Modbus In Components
3-1IM 04L41B01-04E
Saving and Reading Screen D
ata
1
2
3
App
Index
Chapter 3 Saving and Reading Screen Data
3.1 Saving Screen Data
Anyscreenconfiguredonthebuilderscreencanbesavedinfileforminanexternalstoragemedium(CFcard).Screendataissavedintwoways:specifiedscreenandallscreen.
NoteAftereditingthe[Create],or[EXTERNAL1]through[EXTERNAL25]screens,besuretoupdatethescreen.Ifyoudonotupdatethescreen,theediteddatawillbelost.See“ToUpdateanEditedScreen”insection1.13.
Saving the Specified ScreenThe specified custom display screen setting file is saved.
Procedure1. PressMENU.
2. Onthe[File] tab, select [Custom display save]>[Select].
3. Selectascreennumberfromthesoftkeymenu.
4. PresstheInput soft key and enter the file name.
5. PressDISP/ENTER.The file is saved in the root directory.
3-2 IM 04L41B01-04E
ExplanationItem DescriptionFile extension CDCFile form TextFile to save Custom display screen setting file (specified screen only)
File name (optional)Anynameconsistingofuptohalf-size32characters(alphanumericsandsymbols)
Saving destination Root directoryCustom display screen Screen number choices
Internal 1 to 3Custom display screen in the internal memoryExternal 1 to 25Custom display screen in an external storage medium (CF card)
3.1 Saving Screen Data
3-3IM 04L41B01-04E
Saving and Reading Screen D
ata
1
2
3
App
Index
Saving All ScreenAll custom display screen setting files in the internal memory and external storage medium (CF card) are saved in any directory specified for the external storage medium.
Procedure1. PressMENU.
2. Onthe[File] tab, select [Custom display save]>[All].
3. PresstheInput soft key and enter the directory name.
5. PressDISP/ENTER.All screens are saved in the specified directory.
ExplanationItem DescriptionFile to save Custom display screen setting file
(Allscreenfilesbeingcurrentlyset)File name (fixed)Internal 1 to 3: Internal 1.CDC to Internal 3.CDCExternal 1 to 25: External 1.CDC to External 25.CDCCustom display-dedicated setting data fileFile name (fixed)Setting.CDSAllbitmapfilesusedonthecustomdisplayscreenFile name (optional)XXX.BMP(XXX:optional)
Saving destination SpecifieddirectoryDirectory name (optional)Upto20characters(half-sizealphanumericsandsymbols)
Note• ThecustomdisplayscreensettingfilecannotbesavedinUSBmemory.• Thefilecannotbesavedifnoexternalstoragemedium(CFcard)isinsertedoranerroris
occurring.• Thefilenameisnotascreenname.Thescreennamesetonthebuilderscreenissaved
intact in the custom display screen setting file.
3.1 Saving Screen Data
3-4 IM 04L41B01-04E
3.2 Reading Screen Data
The screen data (custom display screen setting file) saved on external storage medium (CFcard)canbereadintheinternalmemory.Screendataisreadintwoways:specifiedscreen and all screen.
Reading the Specified ScreenThe specified screen data (custom display screen setting file) is read.
Procedure1. PressMENU.
2. Onthe[File] tab, select [Custom display load]>[Select].
3. Selectthescreennumberofthereaddestinationfromthesoftkeymenu.Youcanselectthescreennumberfromamonginternal1to3andexternal1to25(seethenext page).
Reading internal 1 to 3 Reading external 1 to 25
Screen names displayed in the submenu
Presence/absence of data
File names displayed in the file list
4. Selectthedirectorycontainingthefiletoberead.Onlythecustomdisplayscreensettingfile(CDC)appears.
3-5IM 04L41B01-04E
Saving and Reading Screen D
ata
1
2
3
App
Index
5. Selectthefiletoberead.The specified custom display screen setting file is read.
If external 1 to 25 are specified for file reading:The selected custom display screen setting file is copied onto the external storage medium (CF card). If the file already exists, the following message appears:
Note• Ifthecapacityoftheexternalstoragemedium(CFcard)isinsufficient,nofilecanberead
with external 1 to 25 specified.• The copy destination directory is the one used when the full screen is read last.• Ifthecapacityoftheinternalmemoryis400MBormore,thebitmapscanbedisplayedeven
if an external storage media (CF card) associated with screens in internal memory is not inserted.
• Whenloadingscreensormovingfromthebuilderscreentotheexecutionpanel,thebitmapfiles in the CF card are copied to the internal memory.
3.2 Reading Screen Data
3-6 IM 04L41B01-04E
Reading All ScreenThe specified directory is set as the read destination and custom display screen setting files are read in the internal memory.
Procedure1. PressMENU.
2. Onthe[File] tab, select [Custom display load]>[All].
3. SelectadirectoryandpressDISP/ENTER.
All custom display screen setting files are read.
ExplanationIfscreendataloading(Select,All)isexecuted,thescreennamedisplayedonthecustomscreensubmenuoftheoperationscreenmenuisupdated.Ifscreendataloading(All)isexecuted,thespecifieddirectorybecomesthereaddestination directory (the default is the root directory of the external storage medium (CF card)).
Notes on Screen Data Saving and ReadingTo use the custom display screen from external storage medium (CF card), the CF card inwhichthescreenissavedneedstobealwaysinserted.ToallowthecustomdisplayscreenofDXinusetobeusedwithanotherDX,savethatscreen in the CF card of another DX.
3.2 Reading Screen Data
App-1IM 04L41B01-04E
Appendix
1
2
3
App
Index
Appendix 1 Example of Creating a Custom Display
Youcancreatethescreeninthefigurebelow.ThisisforaDX1000screen,withtheMultiBatchfunctionOn.
Digital componentBar component
Group name component (when not in MultiBatch mode, GROUP 1 is displayed)
Scale component
Tag(Comment) component
Trend component
Creating componentsProcedure
1. PresstheDISP/ENTER key.TheScreenmenuappears.
2. Using the up and down arrow keys, select [INTERNAL 2], then press the DISP/ENTER key. The execution panel is displayed.
3. PresstheFUNC key, then press the Builder soft key in the action menu. The Builder screen is displayed.
Appendix
App-2 IM 04L41B01-04E
4. Using the arrow keys, move the cursor to the start position for creating the component.
5. PresstheTOOL BOX soft key.
6. PresstheDIGITAL soft key.
7. Using the arrow keys, create a dotted frame for the component.
8. Setthegridto1dot,andshrinkthecomponentframeverticallyandhorizontallyby1dot.
9. PresstheDISP/ENTER key.The Digital component is displayed.
10.PlacethecursorontheDigitalcomponent,thenpresstheCopy soft key.
11.Withthearrow keys, move the cursor to the position where you want to paste the component. Ifyouchangethegridintervalto10dots,youcanmovethecursormorequickly.
12.PressthePaste soft key. The component is copied.
13. Repeat steps 11 and 12 to make another copy.
14. Repeat steps 4 through 13 to create a Bar, Group name, and Tag comment component.
Appendix 1 Example of Creating a Custom Display
App-3IM 04L41B01-04E
Appendix
1
2
3
App
Index
15.Repeatsteps4through9tocreateaTrendandScalecomponent.The component IDs are as follows.
Component ID Component Kind0, 1, 2 Digital3, 4, 5 Bar6, 7, 8 Group name9, 10, 11 Tag comment84 Trend88 Scale
16.Moveandresizeeachcomponentsothattheydonotoverlapeachother.
Appendix 1 Example of Creating a Custom Display
App-4 IM 04L41B01-04E
Changing Component AttributesProcedure
1. Placethecursoroverthecomponentwhoseattributesyouwishtochange.
2. PressthePROPERTY soft key.Thecomponentattributedialogboxisdisplayed.
Attribute dialog box example
3. Changethesettings.Settingsnotlistedbelowshouldbeleftattheirdefaultvalues.
Example of component kinds and setting changes
Component Kind Component ID Setting Item to Change New SettingGroup name 6 Background color Lime
Frame RaisedGroup name 7 Background color Lime
Frame SunkenGroup name 8 Background color Lime
Frame SunkenTag comment 9 Channelnumber 1
Background color RedFrame White
Tag comment 10 Channelnumber 2Background color RedFrame Sunken
Tag comment 11 Channelnumber 3Background color RedFrame White
Trend 84 Direction HorizontalMargin On
Scale 88 Trend direction HorizontalIndicator MarkIndicator type BalancedMargin On
Screen creation example (builder screen) and component ID
0
1
2
3
4
5
6
7
8
9
10
11
88 84
NoteIfyousetthestatusareadisplaytoOff,youcanincreasethescreenarea.
Appendix 1 Example of Creating a Custom Display
App-5IM 04L41B01-04E
Appendix
1
2
3
App
Index
Setting group controlAfter setting display groups, set up group control for the custom display.
Procedure1. PresstheMENUkey(toSettingmode)andselect[Setmenu]tab>[Group
tripline]>[Group].
2. Setthefirstandlastbatchgroupto1,thenenterthegroupnumbersandchannelsettings as follows.
Display group setting example
Group No. Group name (leave default) Channels1 BATCH1-1 001, 002, 0032 BATCH1-2 004, 005, 0063 BATCH1-3 007, 008, 0094 BATCH1-4 010, 011, 012
3. Returntothecustomdisplaybuilderscreen,thenpresstheGR. CTRL soft key.
4. PresstheGrpCtrl 1 soft key.The setting screen for GrpCtrl 1 appears.
5. Enter the following settings.
IntheIDboxes,youcanonlysetcomponentsforchannelassignment(see“IDNumberofComponents”insection1.4).
Group Number (the group number in step 2)
Order ID
1 1 0, 3, 92 1, 4, 103 2, 5, 11
Appendix 1 Example of Creating a Custom Display
App-6 IM 04L41B01-04E
ExplanationChannel 001 is assigned to component ID 0 and 3, channel 002 is assigned to ID 1 and 4, and channel 003 is assigned to ID 2 and 5. Pressingtherightarrowkeyintheexecutionpanelrepeatedlychangesthedisplaygroupnumberto2,3,4,1,2,andsoon.Ifyoupresstheleftarrowkey,thedisplaygroupnumberchangesinthereverseorder.If you press the right arrow key once, channel 4 is assigned to component ID 0 and 3, channel 005 is assigned to ID 1 and 4, and channel 006 is assigned to component ID 2 and 5. Theswitchingofthedisplaybysettingthedisplaygroupinstep5isdescribedinthetablebelow(thechanneldisplaychangesfromtoptobottom.)
Switching of the channel display when pressing the right arrow keyComponent ID: 0, 3, 9
Component ID: 1, 4, 10
Component ID: 2, 5, 11
When the display group is 1 001 002 003004 005 006007 008 009010 011 012
When the display group is 2 004 005 006007 008 009010 011 012001 002 003
When the display group is 3 007 008 009010 011 012001 002 003004 005 006
When the display group is 4 010 011 012001 002 003004 005 006007 008 009
Example of switch of screen display
Left and right arrow keys
Left and right arrow keys
Left and right arrow keysLeft and right arrow keys
Groupcontrol1to4canbeset.Usethisforthe4-screendisplayontheDX2000.
Appendix 1 Example of Creating a Custom Display
App-7IM 04L41B01-04E
Appendix
1
2
3
App
Index
Preparing bitmap filesBitmapfilescanbeassignedtoscaleandbitmapcomponents.Thefollowingrestrictionsapplytobitmapfilesthatcanappearincustomdisplays.• Uncompressed format with 256 colors or fewer • Dataofscreensize640(W)x480(H)pixelsorless
Ifanuncompressedbitmapfilecannotbedisplayedinacustomdisplay,openthefileinaWindows-basedimageeditor(suchasWindows“Paint”),performthefollowingoperations, then save the file. Starting Windows Paint
1. Onthemenubar,clickImage>Attribute. The[Attribute]dialogboxappears.
2. Setthewidthandheightto640and480orless.Thebitmapfile’ssizeunitsofpixelswillbeunitsofdotsontheDXrecorderscreen.Startingfromtheupperleftapexastheorigin,thebitmapfileiscroppedtothespecifiedsize.
3. Setthecolorasdesired,thenclick[OK].
4. Onthemenubar,clickFile>Save As. The[SaveAs]dialogboxopens.
5. Enterafilename,thensetthefiletypeto[Monochromebitmap],[16colorbitmap],or[256colorbitmap].
6. Clickthe[Save]button.Thebitmapfileissaved.
Appendix 1 Example of Creating a Custom Display
App-8 IM 04L41B01-04E
Assigning bitmap files to componentsDisplaytheattributesettingsforthecomponenttowhichyouwanttoassignabitmap.Checkthebitmapsourcedirectory,thensaveyourbitmapfilestothatdirectory.
Procedure1. Move the cursor onto the scale component.
2. PressthePROPERTY soft key.Thecomponentattributedialogboxisdisplayed.
3. Setthe[Kind]to[Bitmap].
4. Clickthe[Details]button,thenpresstheright arrow key.
5. Selectadirectory,thenpresstheDISP/ENTER key. The directory is displayed.
6. PresstheDISP/ENTER key.The directory display screen closes.
7. PerformthefollowingoperationtosavethebitmapfiletothedirectoryontheCFcard you checked in step 4. 1.PresstheFUNCkey,thenpressthesoftkeytoejectthemedia.2. PresstheCF soft key.3. Remove the CF card. 4.AftersavingthebitmapfilestotheCFcard,insertitintotheDXrecorder.
8. Enterthebmpfilename.
Appendix 1 Example of Creating a Custom Display
App-9IM 04L41B01-04E
Appendix
1
2
3
App
Index
9. Click[OK],thenpresstheDISP/ENTER key. Thebitmapisdisplayedinthescalecomponent.
ExplanationThedirectoryforsavingbitmapfilesisthedirectorylastusedforloadingdata.Youshouldmakethesizeofthecomponentsdisplayingbitmapsthesamesizeasthebitmapsthemselves.Ifthebitmapislargerthanthecomponent,itwillbecroppedbythesizeofthecomponent.
Appendix 1 Example of Creating a Custom Display
App-10 IM 04L41B01-04E
Appendix 2 Viewing Screens Created in DAQStudio
ThisisanexampleofhowtoviewascreencreatedinDAQStudioonaDXrecorder.
ProcedureWhenreceivingscreendatafromtheDXrecorder,theChannel/alarmlistpageisdisplayed in the work area. IftheDXincludesthe/AS1option,setuptheDXinadvanceasfollows.(IntheexampleofsettinguptheDXbelow,theuserIDisnotset.)DX main unit (with /AS1 option) settings
1. PressMENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basicsettingmode),andselecttheEnvironmenttab>Security>Communication,and set Login.
2. SelecttheMenutab>Userregistration>Adminsettings>Mode,set[Key+Comm],enter the user name, and return to the operation screen.If a password is set, this concludes the setup. If no password set, perform the following additional steps.
3. PressFUNC, select Admin1, then press DISP/ENTER.
4. SkiptheuserIDandselectENT.
5. Enter Admin1 for the password, then select ENT.
6. Enteranewpassword(between6and20alphanumericcharacters,nospacesallowed), then select ENT.
7. Reenter the new password and select ENT.
Operation of DAQStudio1. OpendatathatwascreatedandsavedinDAQStudio.Whenyouopensuchdata,
iftherearecomponentstowhichbitmapsareassigned,besureyousavethebitmapfilesinthesamelocationasthescreendata.
2. Onthemenubar,clickCommunication>Send.Thesenddialogboxappears.
3. Check that the screen version and DX recorder version match.
IftheDXrecorderversionisearlierthantheDAQStudioscreenversion,somecomponents may not display.
4. EntertheIPaddressandhostname,andtheusername,userID,andpasswordset on the DX recorder.
If a user name is not set on the DX recorder you are sending to, enter [admin].
5. Clickthe[Send]button.The screen sent to the DX recorder is displayed.
App-11IM 04L41B01-04E
Appendix
1
2
3
App
Index
Appendix 2 Viewing Screens Created in DAQStudio
ExplanationDAQStudio screen versions and the DX recorder firmware versionWhensendingandreceivingscreendata,makesuretheDAQStudio’sscreenversionand the DX recorder’s firmware version are either the same, or the version on the receiving end is newer. If the versions differ and you attempt to display screen data created on a new version using an older version, the components may not display properly.Therearemorekindsofcomponentsthatcanbecreatedandattributesthatcanbesetonthenewerversion.Sincethesecannotbedisplayedontheolderversion,thedisplaywillbeincorrect.
Sending and receiving data to and from DAQStudioWhensendingdatafromDAQStudiototheDXrecorder,allscreenandbitmapdatainthefoldercontainingthedatabeingdisplayedbyDAQStudioisloadedontheDXrecorder. WhenDAQStudioreceivesdatafromtheDXrecorder,allscreenandbitmapdatainthefoldercontainingthedatabeingdisplayedontheDXrecorderisreceivedintothefoldercontainingthescreendatacurrentlybeingdisplayedbyDAQStudio.
App-12 IM 04L41B01-04E
Appendix 3 Differences in Components by Release Number
ThecomponenttypesandattributesthatcanbecreatedforcustomdisplayscreensdifferdependingontheDXrecorderreleasenumber.Hereinafter,releasenumber3andreleasenumber4willbenotatedasR3andR4,respectively.
When displaying R3 screen data under R4• ComponentattributesthatbecameavailableforsettinginR4aresettotheirdefaults.• [2nd span Lower] and [2nd span Upper] settings of trend and scale components can
nowbesetupto1decimalplace.
When displaying R4 screen data under R3• Components not supported in R3 are not displayed. • The [Depend ID]’s of components dependent on other components that are not
supported in R3 are set to [None]. • ComponentattributesnotsupportedinR3aredeleted.The[Verticaldisplay]of
componentswhoseattributesaredeleted(Labels,Tagno.,Tagcomment,Units,SpanL,andSpanU)ischangedto[Horizontaldisplay].
• ComponentattributesnotsupportedinR3areignored.Themethodofplottingischangedforcomponentswhoseattributesaredeleted(trendandscale).
• Forthetrendcomponent’s[2ndspanLower]and[2ndspanUpper]attributes,thenumberofdecimalplacesischangedto0,andthenumberafterthedecimalpointisrounded.
• Forthescalecomponent’s[2ndspanLower]and[2ndspanUpper]attributes,thenumberofdecimalplacesischangedto0,andthenumberafterthedecimalpointisrounded.
• If not displaying the status area in an R4 screen, it is displayed. Components in the status area are repositioned.
From the point at which you move the cursor to move a component, components in thestatusareamovebelowthestatusarea.WhenthestatusareaissettoNoDisplay,the height of components whose height is at the maximum remains the same, and the componentisdisplayedbelowthestatusarea.
Differences in Components by Release NumberComponent R3 screen R4 screenSystemicon NewGroup name NewBatchgroupnumber New Batch name New Timelabel NewMemorybar NewModbusIn New
Differences in Attributes by Release NumberComponent Attribute R3 screen R4 screenScreen Statusarea NewLabels Vertical display NewTag No. Vertical display New Tag comment Vertical display New Unit Vertical display NewSpanL Vertical display NewSpanU Vertical display NewBitmap Trend grid mode New Line Trend grid mode New
Continued on the next page
App-13IM 04L41B01-04E
Appendix
1
2
3
App
Index
Component Attribute R3 screen R4 screenTrend Margin New
Change group NewTime interval NewTime grid display NewScalegriddisplay New2nd span Lower No decimal place setting Onedecimalplacecan
beset2nd span Upper No decimal place setting Onedecimalplacecan
besetScale Indicator type New
Unit NewMarginonbothsidesofSpan
New
Display group switching
New
2nd span Lower No decimal place setting Onedecimalplacecanbeset
2nd span Upper No decimal place setting Onedecimalplacecanbeset
Appendix 3 Differences in Components by Release Number
Index-1IM 04L41B01-04E
Index
Numeric2nd span ................................................................................. 2-4
Aalarm indicator ............................................................... 1-8, 2-30alarm level .............................................................................. 2-3alarm list ........................................................................ 1-8, 2-35alarm mark ..................................................................... 1-8, 2-25alarm set-point mark ............................................................. 2-27attributesettings ............................................................ 1-13, 2-2
BBACK .................................................................................... 1-15bargraph ......................................................................... 1-8, 2-7batchgroupnumber ......................................1-8, 1-18, 2-2, 2-46batchname .................................................................... 1-8, 2-48bitmap ............................................................................ 1-8, 2-37builderscreen .................................................................. 1-1, 1-4
Cchanging the component which is depended on .................. 1-16channelnumber ...................................................................... 2-3circle .............................................................................. 1-8, 2-52commentblock .............................................................. 1-8, 2-56commentbox ................................................................. 1-8, 2-55commonattributes .................................................................. 2-2communication input...................................................... 1-8, 2-58component arrangement order ...................................... 1-7, 1-15component list ........................................................................ 1-8component name .................................................................... 1-9components, creating ............................................................. 1-7components, deleting ........................................................... 1-22components, moving .............................................................1-11components, overlapping ....................................................... 1-9components for channel assignment ...................................... 1-9components for comment display ........................................... 1-9components for list display ..................................................... 1-9components for static image display ...................................... 1-9components for trend display ................................................. 1-9components with action functions........................................... 1-9component text string display restriction ................................ 1-9copy ...................................................................................... 1-14cursor............................................................................... 1-1, 1-6
Ddependancy .......................................................................... 1-16depend ID ............................................................................... 2-2detailedattributesettings...................................................... 1-13diagram components .............................................................. 1-9digital ............................................................................... 1-8, 2-5display processing time, precautions...................................... 1-2display when components overlap on the execution screen 1-10
Eexecution screen ........................................................... 1-2, 1-23
Fframe ...................................................................................... 2-2
GGR. CTRL ............................................................................. 1-18grid.......................................................................................... 1-6group control........................................................................... 2-3group control order ................................................................. 2-3group control settings ........................................................... 1-21group name ................................................................... 1-8, 2-39groupnumber ....................................................................... 1-18groups, switching .................................................................. 1-19
IIDnumber ............................................................................... 1-9IDnumberofcomponents ...................................................... 1-9
Llabel ............................................................................... 1-8, 2-18labelcomponents ................................................................... 1-9line ................................................................................. 1-8, 2-50
Mmemorybar ................................................................... 1-8, 2-42menu, hiding ......................................................................... 1-23message list................................................................... 1-8, 2-33modbusin ...................................................................... 1-8, 2-59
Nnumberofcomponents ........................................................... 1-7numberofcomponentswhichcanbecreatedononescreen 1-9
Ooperation flow ......................................................................... 1-3operation guide ....................................................................... 1-3order ..................................................................................... 1-19overlap restriction ................................................................. 1-10
Ppaste ..................................................................................... 1-14pushbutton .................................................................... 1-8, 2-53
Rreading all the custom display screens................................... 3-6reading the specified screen................................................... 3-4rectangle ........................................................................ 1-8, 2-51releasing dependency .......................................................... 1-16restrictions on channel assignments ...................................... 2-4revision history (manual) .............................................................i
Ssaving all the custom display screens .................................... 3-3saving the specified screen .................................................... 3-1scale .............................................................................. 1-8, 2-12scale components................................................................... 1-9screen, updating ................................................................... 1-24screenattributes ..................................................................... 2-1screen construction area ........................................................ 1-1screen name ........................................................................... 2-1screen transition ..................................................................... 1-2simpleattributesettings ........................................................ 1-13
Index
Index
1
2
3
App
Index
Index-2 IM 04L41B01-04E
Indexsimplebargraph ............................................................ 1-8, 2-25simple digital .................................................................. 1-8, 2-24size,changing....................................................................... 1-12soft key menu ......................................................................... 1-1span lower limit .............................................................. 1-8, 2-31span upper limit ............................................................. 1-8, 2-31status area ....................................................................... 1-1, 2-1status display components ..................................................... 1-9structure of the manual ............................................................... iisubmenu .......................................................................... 1-3, 1-5switch............................................................................. 1-8, 2-16switchnumber ........................................................................ 2-3symbols(usedinthemanual)..................................................... iisynchroattribute ..................................................................... 2-3synchronizeaction .................................................................. 2-3synchronizeactionattributesettings .................................... 1-13synchro target ......................................................................... 2-3system icon.................................................................... 1-8, 2-41
alarm ............................................................................ 2-41CF card ........................................................................ 2-41email ............................................................................ 2-41key & email .................................................................. 2-41key lock ........................................................................ 2-41math ............................................................................. 2-41memory sample ........................................................... 2-41status ........................................................................... 2-41user & status ................................................................ 2-41user lock ...................................................................... 2-41
Ttag........................................................................................... 1-8tag comment ......................................................................... 2-22tagnumber ........................................................................... 2-20timelabel ....................................................................... 1-8, 2-44ToBACK ................................................................................ 1-15ToBOTTOM .......................................................................... 1-15ToFRONT ............................................................................. 1-15ToTOP .................................................................................. 1-15trademarks...................................................................................itrend ................................................................................ 1-8, 2-9
Uunit ................................................................................. 1-8, 2-28update cycle ........................................................................... 1-9
Vvalue ....................................................................................... 2-3visibilityattribute ................................................................... 1-16visible...................................................................................... 2-3