Duplicarver Assembly Manual
15
F-200 ASSEMBLY MANUAL 222 1st Avenue NW • Watertown, SD 57201 Phone: (605) 882-3888 • Fax: (605) 882-0778 Email: [email protected] • Website: www.terrco.com Table Material 1-1/8” Particle Board Table Size 32” x 24” x 1-1/8” Work Area 3’ x 5’ Pivot Arms 1/8” Formed Steel Pivot Bearings Steel Ball Bearings Router Guide Shaft 5/8” Hardened Steel Shaft Bearings Steel Linear Ball Bearings Router 1-3/4 HP Porter Cable Table Legs 16 Gauge Steel Frame Steel Finish Baked Enamel Carving Capacity 14” Dia. x 40” Tall Spindle Capacity 8” Dia. x 60” Long Weight 238 lbs Skid Size 42” x 42” x 16”
-
Upload
andremajic -
Category
Documents
-
view
288 -
download
22
Transcript of Duplicarver Assembly Manual
F-200 ASSEMBLY MANUAL
222 1st Avenue NW • Watertown, SD 57201
Phone: (605) 882-3888 • Fax: (605) 882-0778
Email: [email protected] • Website: www.terrco.com
Table Material 1-1/8” Particle Board
Table Size 32” x 24” x 1-1/8”
Work Area 3’ x 5’
Pivot Arms 1/8” Formed Steel
Pivot Bearings Steel Ball Bearings
Router Guide Shaft 5/8” Hardened Steel
Shaft Bearings Steel Linear Ball Bearings
Router 1-3/4 HP Porter Cable
Table Legs 16 Gauge Steel Frame
Steel Finish Baked Enamel
Carving Capacity 14” Dia. x 40” Tall
Spindle Capacity 8” Dia. x 60” Long
Weight 238 lbs
Skid Size 42” x 42” x 16”