22in.

11in. 11in.

18in.

18in.

Flip this board over to create the lowerpart of the leg.

This cut is ata 45° angle.

Mark and cut this board to 18 inchesfrom the top of the knee.

approx. 12in.

11in.

approx. 12in.

Flip this board over, measure and cut to 18 inches.

Use the remaining scrap for the top part of the leg.

Place these pices on the leg,measure and mark them at11 inches from the knee.

Make the cut using a 15° angle.

Flip this board over, measure and cut to approx. 12 inches.

This cut is ata 45° angle.

This cut is ata 45° angle.

18in.

18in.

scrap

Scrap board will be approximately 54 inches long if you started with an 8 foot board.

This cut is a15° angle.

1.

2.

3.

4.

Assemble leg using wood glue and screws.