9760 SW Freeman Dr. • Wilsonville, OR 97070 USA(503) 682.3633 • info@ssiworld.com

PD-M100

DUAL-SHEAR® M100 SHREDDER SSI’s Dual-Shear® M100 is a low-speed, high-torque, two-shaft, rotary shear shredder designed to efficiently process a variety of difficult materials.

SSI ADVANTAGES

HIGH-TORQUE, LOW-SPEED DESIGNDelivers multipurpose shredding with greater on-line reliability and lower maintenance requirements than other technologies.

PATENTED ACLS - ADVANCED CUTTER LOCKING SYSTEM™Eliminates daily requirement to tighten cutter stack while improving shredder performance and cutter life.

SHOCK LOAD PROTECTION FEATUREProtects shredder and drive components. Electric version offers patented SSP - Severe Shock Protection™ controlled torque coupling. Hydraulic version utilizes multiple relief valves.

AUTO REVERSAL FEATUREProtects against overfeeding and damage by non-shreddables.

CONVERTIBLE DRIVEVersatile design accommodates electric or hydraulic drive. Optional conversion package available.

PROPRIETARY BEARING PROTECTIONIsolates bearings from cutting chamber contamination and protects against bearing failure.

DIRECT DRIVE MOTORProvides improved efficiency and reliability. Alternate speed and torque combinations available.

M100 DUAL-SHEAR® SHREDDERS PROCESS MATERIALS INCLUDING: ▪ Mixed Waste

▪ Passenger & Truck Tires

▪ Steel Drums

▪ Plastics (Purgings & Film)

▪ Wood / Pallets

▪ Fibers / Textiles / Foam

▪ Demolition Waste

▪ Baled & Bulky Materials

▪ Paper / Cardboard

▪ Organic Waste

▪ Metals

▪ and more...

ELECTRIC OR HYDRAULIC DRIVEHydraulic Drive When Processing:

▪ Mixed, unsorted materials

▪ Batch fed materials

▪ Materials requiring enhanced particle size or throughput control

▪ Installations requiring optional reduced voltage starting

▪ Materials containing non-shreddables

Electric Drive When Processing:

▪ Sorted, uniform materials

▪ Conveyor fed or metered materials

▪ Materials containing limited non-shreddables

9760 SW Freeman Dr. • Wilsonville, OR 97070 USA(503) 682.3633 • info@ssiworld.com

Note: Illustrations, specifications and descriptions presented reflect standard product at time of publication and are subject to change without notice. Dimensions are approximate. Photographs may include optional equipment and accessories. SSI offers compactors, balers, granulators, conveyors and classifiers as well as specialized motors, stands, hoppers, and mobile configurations. Consult factory to discuss your processing needs.

STANDARD CUTTING CHAMBER (W X L) 41” X 63” (1,065mm X 1,600mm)Optional length 75” (1,900mm)

SHREDDER MODEL M100E M100SD M100HDrive Electric Electric Hydraulic

Number of Electric Motors One Two One (HPU)

Horsepower 200 HP (149kW) 200 HP (149kW) 200 HP (149kW)

Voltage 460/3/60 460/3/60 460/3/60

Voltage Options Many - Consult Factory Many - Consult Factory Many - Consult Factory

Autochop Feature N/A N/A Included

Shock Load Protection Yes (SSP™) Yes (SSP™) Yes (Multiple Relief)

Cutter Thickness (nominal) 2” (50mm) 2” (50mm) 2” (50mm)

Cutter Diameter 20.9” (530mm) 20.9” (530mm) 20.9” (530mm)

Cutter Material HW5 HW5 HW5

Shaft Diameter 7.4” (188mm) 7.4” (188mm) 7.4” (188mm)

Cutting Chamber (WxL)* 41” x 63” (1,065mm x 1,600mm) 41” x 63” (1,065mm x 1,600mm) 41” x 63” (1,065mm x 1,600mm)

Machine Length (C)* 193” (4,891mm) 193” (4,891mm) 155” (3,937mm)

Machine Width (D) 65” (1,661mm) 65” (1,661mm) 65” (1,661mm)

Machine Height (E) 124” (3,159mm) 124” (3,159mm) 124” (3,159mm)

Machine Weight 27,000 lbs (12,247 kg) 27,000 lbs (12,247 kg) 24,000 lbs (10,800 kg)

Hopper Opening (FxG)* 62” x 88” (1,579mm x 2,225mm)

62” x 88” (1,579mm x 2,225mm)

61.5” x 98.5” (1,562mm x 2,502mm)

Hopper Height (H) 47” (1,200mm) 47” (1,200mm) 47” (1,200mm)

Stand Height (I) 48” (1,225mm) 48” (1,225mm) 48” (1225mm)

HPU Configuration N/A N/A Closed Loop

HPU Dimensions N/A N/A 70” x 84” x 86” (1.8m x 2.1m x 2.2m)

HPU Weight N/A N/A TBD

Motor starting and protection devices are mounted in a single NEMA 4 enclosure. PLC and operator interface are mounted in a second NEMA 4 enclosure.

* Dimensions apply to the M100 with standard 63” (1,608mm) cutting chamber length. Secondary optional lengths available at 75” (1,898mm) and 52” (1,317mm).

SSI offers a full range of energy-efficient electric and hydraulic shredders as well as custom units to meet all processing requirements.

STANDARD CUTTER PROFILES

C

G

L

I

E

D

F

H

W

G

C

C

G

L

I

E

D

F

H

W

G

C

C

G

L

I

E

D

F

H

W

G

C