Dt memphis style process journal
description
Transcript of Dt memphis style process journal
The Title: Choosing appropriate materials and marking
Name: Jack Han
Date: November 15, 2012
What I did:
I found appropriate sized pine wood to make holder I marked the material by my final design
Emotion: I was very excited about making new devices with my hands
What next:
Measure the bottom Cut it Glue two parts
AOI: Human Ingenuity because I could learn mechanism of device construction
The Title: Measure and cut each part
Name: Jack Han
Date: November 16, 2012
What I did:
Measured bottom part Cut the part with bend saw Glued two parts together Made woods smooth with disk sander
Change to my plan: Didn’t able to cut out back bone part
Didn’t able to glue bottom part to the main part
Emotion: Felt unaccomplished by many changes
What next: Cut back bone part Adjust bottom wood
AOI: Human Ingenuity
Pictures and Diagrams
Smoothing wood with disk senderThe Title: Find the materials and cut
Name: Jack Han
Date: November 19, 2012
What I did:
Glued front stopping object I tried to find appropriate material for back part Measure the back part Cut the back Part
1.Change to my plan: I didn’t able to glue the back part
Emotion: I was pretty accomplished because I’ve done every work that I planed
What next: Glue the back part Find the materials for the drawer Measure the parts Cut the bit of the parts
AOI: Human Ingenuity
Pictures and Diagrams
Cutting back-bone materialsThe Title: Cut the back part and fix the errors
Name: Jack Han
Date: November 22, 2012
What I did:
Measure back part Cut the back part with a tenon saw Make back part smooth with disk sander Measure the wrong part Cut the part with tenon saw
Change to my plan
Didn’t able to glue back part Didn’t able to measure drawer materials
Emotion: I was really disappointed about my self because the mistakes took my
entire time
Mistakes:
Figured out that top part is little bit short
What next:
Cut the mistakes Glue the back part Measure drawer materials
AOI: Human Ingenuity
Pictures and Diagrams
Sending edges with garnet paper
The Title: nailing and measuring
Name: Jack Han
Date: November 23, 2012
What I did: Punch the nails to the bottom part Smooth rough part with garnet paper Measure inside drawer materials
Change to my plan
Haven’t measure drawer part completely
Emotion: I was very nervous since my mistakes require delicate works
What next:
Finish measuring parts Cut the parts
Learner Profile: Human Ingenuity
Pictures and Diagrams
Hammering Nail on the bottom part
The Title: Measuring and Cutting
Name: Jack Han
Date: November 26, 2012
What I did: I have measured two pieces which used to make a drawer Used table saw and circular pull down saw (helped by mr.cutting) to cut it
Change to my plan
I fully finished what I needed to finish
Emotion: I was very happy by finishing my daily work
What next:
Glue two pieces together Smooth them with the sender
Learner Profile: AOI
Pictures and Diagrams
Cutting one of drawer pieces with the sawThe Title: Organizing the folder
Name: Jack Han
Date: November 29, 2012
What I did: Today I just check if there is a missing or incorrect information in the folder
Change to my plan
I was planning join drawer pieces, but I did not happen.
Emotion: I confused about it because I had to reschedule my plans
What next:
Join the two pieces
Smooth the edges
AOI: Approach to learning. By learning the more harder DT planning and design structure
The Title: Gluing and smoothing
Name: Jack Han
Date: November 30, 2012
What I did: Tried to glue drawer pieces
Smooth overall sharp parts with railing sender
Mistakes
Because the pieces were not easily joined, I got to wait for the result
Change to my plan
Even though the pieces were not joined perfectly, had not much changes
Emotion: I was very depressed by spending most of periods on gluing
What next:
Join materials together
AOI: Human Ingenuity
Pictures and Diagrams
The Title: re-Gluing and smoothing
Name: Jack Han
Date: December 3, 2012
What I did:
I perfectly glued two drawer materials Rest of time I smoothed the sharp parts
Change to my plan:
No changes
Emotion: I was very nervous since my mistakes require delicate works
What next:
Use puddy to fill empty holes
AOI: Human Ingenuity
The Title: filling holes, gluing and nailing
Name: Jack Han
Date: December 6, 2012
What I did:
I re-glue the stopping part and adjust them and hold it with Long G-Clamp
I punched nail into the back-bone part Filled empty holes with puddies
Mistakes:
The stopping material separated from the holder, so I re-glue them. I discovered that backbone material nail is weak, so I removed it.
Change to my plan
A few mistakes, but no changes.
Emotion: I was nervous because I had errors
What next:
Final smoothing for painting Measure handle Cut and glue it
AOI: Human Ingenuity
Pictures and Diagrams
The Title: Smoothing, measuring, cutting and gluing
Name: Jack Han
Date: December 7, 2012
What I did:
I smoothed the holder with sander and garnet paper Found small handle piece and measure Cut and I glued it on the outer drawer
Change to my plan
No changes
Emotion: I felt excited because I have a few steps left until the finish of the project
What next:
Collect colors that I imagined
AOI: Human Ingenuity
Pictures and Diagrams
Smoothing sharp corners with garnet paper
The final shape before the painting
The Title: Painting the holder
Name: Jack Han
Date: December 10, 2012
What I did:
Painted top and side part with green several times
Change to my plan
I wanted to paint more surfaces
Emotion: I felt lucky to finally do the end step
What next:
Paint back, drawer, front and bottomAOI: Human Ingenuity
Pictures and Diagrams
Painting top
Painting side
The Title: Rejoin the drawer, handle and painting
Name: Jack Han
Date: December 13, 2012
What I did:
I made a slot to join two pieces Drilled a hole and screwed the screw Paint the drawer, front, back and bottom
Mistakes:
Turns out that the drawer is not perfectly joined Handle should not be glued
Change to my plan
No changes of plan
Emotion: I was ashamed because I messed up some jobs
What’s next?
Repaint the dim part for better quality
AOI: Human Ingenuity
Pictures and Diagrams
Painting the drawer surfaceThe Title: Repaint the dim parts
Name: Jack Han
Date: January 7, 2013
What I did:
I repainted the every parts to show better quality
Change to my plan
I fulfilled my aim
Emotion: As the color was bright and shine, I felt calm by having quality works
What’s next? If the holder is not bright and neat enough, I should have to repaint it.
AOI: Human Ingenuity
Pictures and Diagrams
Repainting the drawer of the holder