DSR - Schedule of Rates -Internal

7/31/2019 DSR - Schedule of Rates -Internal

1/27

Code

No.

Abbreviated Nomenclature / Description of Item Unit Rate

Rs.

COPPER WIRING IN STEEL CONDUIT

1.1 WGSTLPT Point wiring in steel conduit, with piano type switch :Wiring for light point / fan point / exhaust fan point / call

bell point with 1.5 sq.mm FR PVC insulated copper

conductor single core cable in surface / recessed steel

conduit, with piano type switch, phenolic laminated sheet,

suitable size M.S box and earthing the point with 1.5

sq.mm FR PVC insulated copper conductor single core

cable etc as required.

1.1.1 Group A Point 361.00

1.1.2 Group B Point 436.00

1.1.3 Group C Point 559.00

1.2 WGSTLPTTC Twin Control point wiring in steel conduit, with piano type

switch :

Wiring for twin control light point with 1.5 sq.mm FR PVC

insulated copper conductor single core cable in surface /

recessed steel conduit, 2 way piano type switch, phenolic

laminated sheet, suitable size M.S. box and earthing the

point with 1.5 sq.mm FR PVC insulated copper conductor

single core cable etc as required.Point 560.00

1.3 WGSTLMOD Point wiring in steel conduit, with modular type switch

Wiring for light point / fan point / exhaust fan point / call

bell point with 1.5 sq.mm FR PVC insualted copper

conductor single core cable in surface / recessed steel

conduit, with modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm FR PVC

insulated copper conductor single core cable etc as

re uired.




1.4 WGSTLMODTC Twin control point wiring in steel conduit, with modular

type switch :


insualted copper conductor single core cable in surface /

recessed steel conduit, 2 way modular switch, modular

plate, suitable GI box and earthing the point with 1.5

sq.mm FR PVC insualted copper conductor single core

cable etc as re uired. Point 617.00

1.0 WIRING

SUB HEAD -1.0 WIRING 1


2/27

Code

No.


Rs.

1.5 WGSTLPP2 Power plug wiring in steel conduit (2X4 sq.mm)

Wiring for light / power plug with 2X4 sq.mm FR PVC


recessed steel conduit alongwith 1 No. 4 sq.mm FR PVC

insulated copper conductor single core cable for loopearthing as required. Meter 136.00

1.6 WGSTLPP4 Power plug wiring in steel conduit (4X4 sq.mm)



recessed steel conduit alongwith 2 nos. 4 sq.mm FR PVC

insulated copper conductor single core cable for loop

earthing as required. Meter 191.00

1.7 WGSTLSB Circuit / submain wiring in steel conduit :

Wiring for circuit / submain wiring along with earth wire

with the following sizes of FR PVC insulated copper

conductor, single core cable in surface / recessed steel

conduit as required.

1.7.1 2 X 1.5 sq.mm + 1 X 1.5 sq.mm earth wire Meter 109.00


1.7.3 2 X 4 sq.mm + 1 X 4 sq.mm earth wire Meter 135.00



1.7.6 2 X 16 sq.mm + 1 X 16 sq.mm earth wire Meter 321.001.7.7 2 X 25 sq.mm + 1 X 16 sq.mm earth wire Meter 406.00







COPPER WIRING IN PVC CONDUIT

1.8 WGPVCPT Point wiring in PVC conduit, with piano type switch :



conductor single core cable in surface / recessed PVC

conduit, with piano type switch, phenolic laminated sheet,

suitable size M.S box and earthing the point with 1.5


cable etc as required.



3/27

Code

No.


Rs.




1.9 WGSTLPTTC Twin Control point wiring in PVC conduit, with piano type

switch :



recessed PVC conduit, 2 way piano type switch, phenolic

laminated sheet, suitable size M.S. box and earthing the

point with 1.5 sq.mm FR PVC insulated copper conductor

single core cable etc as required.Point 398.00

1.10 WGPVCMOD Point wiring in PVC conduit, with modular type switch


bell point with 1.5 sq.mm FR PVC insulated copperconductor single core cable in surface / recessed PVC

conduit, with modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm FR PVC

insulated copper conductor single core cable etc as

re uired.




1.11 WGSTLMODTC Twin control point wiring in steel conduit, with modular

type switch :


insualted copper conductor single core cable in surface /

recessed PVC conduit, 2 way modular switch, modular

plate, suitable GI box and earthing the point with 1.5

sq.mm FR PVC insualted copper conductor single core

cable etc as re uired. Point 453.00

1.12 WGPVCPP2 Power plug wiring in PVC conduit (2X4 sq.mm)



recessed PVC conduit alongwith 1 No. 4 sq.mm FR PVC

insulated copper conductor single core cable for loopearthing as required. Meter 97.00

1.13 WGPVCPP4 Power plug wiring in PVC conduit (4X4 sq.mm)



recessed steel conduit alongwith 2 nos. 4 sq.mm FR PVC

insulated copper conductor single core cable for loop

earthing as required. Meter 149.00



4/27

Code

No.


Rs.

1.14 WGPVCSB Circuit / sub-main wiring in PVC conduit :

Wiring for circuit / submain wiring along with earth wire

with the following sizes of PVC insulated copper

conductor, single core cable in surface / recessed steel

conduit as required.








1.14.8 4 X 2.5 sq.mm + 2 X 2.5 sq.mm earth wire Meter 118.001.14.9 4 X 4 sq.mm + 2 X 4 sq.mm earth wire Meter 148.00





RE-WIRING IN STEEL / PVC CONDUIT

1.15 RW Point re-wiring :

Rewiring for light point / fan point / exhaust fan point / call


conductor single core cable and 1.5 sq.mm FR PVC

insulated copper conductor single core cable as earth wire

in existing surface / recessed steel / PVC conduit including

dismantling as required.



1.15.3 Group CPoint 200.00

1.16 RWTC Twin control point re-wiring :

Rewiring for twin control light point with 1.5 sq.mm FR

PVC insulated copper conductor single core cable and 1.5


cable as earth wire in existing surface / recessed steel /

PVC conduit including dismantling as required.Point 200.00



5/27

Code

No.


Rs.

1.17 WGEC Wiring in existing conduit :

Supplying and drawing following sizes of FR PVC

insulated copper conductor, single core cable in the

existing surface / recessed steel/ PVC conduit as required.

1.17.1 1 X 1.5 sq.mm Meter 19.00

1.17.2 2 X 1.5 sq.mm Meter 25.00

1.17.3 3 X 1.5 sq.mm Meter 32.00

1.17.4 4 X 1.5 sq.mm Meter 38.00

1.17.5 5 X 1.5 sq.mm Meter 45.00

1.17.6 6 X 1.5 sq.mm Meter 52.00

1.17.7 7 X 1.5 sq.mm Meter 58.001.17.8 8 X 1.5 sq.mm Meter 65.00

1.17.9 9 X 1.5 sq.mm Meter 71.00

1.17.10 10 X 1.5 sq.mm Meter 78.00

1.17.11 2 X 2.5 sq.mm Meter 32.00

1.17.12 3 X 2.5 sq.mm Meter 43.00

1.17.13 4 X 2.5 sq.mm Meter 53.00

1.17.14 5 X 2.5 sq.mm Meter 63.00

1.17.15 6 X 2.5 sq.mm

Meter 73.001.17.16 7 X 2.5 sq.mm Meter 83.00

1.17.17 8 X 2.5 sq.mm Meter 93.00

1.17.18 9 X 2.5 sq.mm Meter 104.00

1.17.19 10 X 2.5 sq.mm Meter 114.00

1.17.20 2 X 4 sq.mm Meter 43.00

1.17.21 3 X 4 sq.mm Meter 58.00

1.17.22 4 X 4 sq.mm Meter 73.00

1.17.23 5 X 4 sq.mm Meter 88.00

1.17.24 6 X 4 sq.mm Meter 103.00

1.17.25 7 X 4 sq.mm Meter 119.00

1.17.26 8 X 4 sq.mm Meter 134.00

1.17.27 9 X 4 sq.mm Meter 149.00

1.17.28 10 X 4 sq.mm Meter 164.00

1.17.29 2 X 6 sq.mm Meter 59.00

1.17.30 3 X 6 sq.mm Meter 83.00



6/27

Code

No.


Rs.1.17.31 4 X 6 sq.mm Meter 106.00

1.17.32 5 X 6 sq.mm Meter 130.00

1.17.33 6 X 6 sq.mm Meter 154.00

1.17.34 7 X 6 sq.mm Meter 178.00

1.17.35 8 X 6 sq.mm Meter 202.001.17.36 9 X 6 sq.mm Meter 225.00

1.17.37 10 X 6 sq.mm Meter 249.00

1.18 TLWGEC Telephone wiring in existing conduit :

Supplying and drawing following pair 0.5 sq.mm FR PVC

insulated copper conductor, unarmoured telephone cable

in the existing surface / recessed steel / PVC conduit as

required.

1.18.1 1 Pair Meter 16.00

1.18.2 2 Pair Meter 19.00

1.18.3 4 Pair Meter 21.00

1.19 TVWGEC TV cable in existing conduit :

Supplying and drawing co-axial TV cable RG-6 grade,

0.7mm solid copper conductor PE insulated, shielded with

fine tinned copper braid and protected with PVC sheath in

the existing surface / recessed steel / PVC conduit as

required. Meter 23.00

STEEL / PVC CONDUIT, METAL BOXES

1.20 STLCON S/F steel conduit :

Supplying and fixing of following sizes of steel conduit

along with accessories in surface / recess including

painting in case of surface conduit, or cutting the wall and

making good the same in case of recessed conduit as

required.

1.20.1 20 mm Meter 77.00

1.20.2 25 mm Meter 86.00

1.20.3 32 mm Meter 105.00

1.20.4 40 mm Meter 127.00

1.20.5 50 mmMeter 168.00



7/27

Code

No.


Rs.

1.21 PVCCON S/F PVC conduit :

Supplying and fixing of following sizes of PVC conduit

along with accessories in surface /recess including cutting

the wall and making good the same in case of recessedconduit as required.

1.21.1 20 mm Meter 41.00

1.21.2 25 mm Meter 47.00

1.21.3 32 mm Meter 56.00

1.21.4 40 mm Meter 67.00

1.21.5 50 mm Meter 90.00

1.22 MB S/F metal boxes :

Supplying and fixing metal box of following sizes (nominal

size) on surface or in recess with suitable size of phenolic

laminated sheet cover in front including painting etc. as

required.

1.22.1 75 mm X 75 mm X 60 mm deep Each 55.00





1.22.6 200 mm X 125 mm X 60 mm deepEach 97.00









1.22.15 250 mm X 300 mm X 60 mm deep Each 176.001.22.16 250 mm X 300 mm X 100 mm deep Each 191.00

SWITCHES & ACCESSORIES

1.23 PTSWEB S/F piano type switch / socket :

Supplying and fixing following piano type switch / socket

on the existing switch box / cover including connections

etc. as required.



8/27

Code

No.


Rs.

1.23.1 5/6 amps switch Each 17.00

1.23.2 2 way 5/6 amps switch Each 19.00


1.23.4 3 pin 5/6 amps socket outlet Each 21.00


1.23.6 Telephone socket outlet Each 27.00

1.23.7 TV antenna socket outlet Each 27.00

1.24 MODSWEB S/F modular type switch / socket :

Supplying and fixing following modular switch / socket on

the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

1.24.1 5/6 amps switch Each 46.001.24.2 2 way 5/6 amps switch Each 50.00




1.24.6 Telephone socket outlet Each 61.00

1.24.7 TV antenna socket outlet Each 60.00

1.25 MODFREB S/F modular type electronics fan regulator :

Supplying and fixing stepped type electronic fan regulator

on the existing modular plate switch box includingconnections but excluding modular plate etc. as required.

Each 247.00

1.26 MODBPEB S/F modular type blanking plate :

Supplying and fixing modular blanking plate on the

existing modular plate & switch box excluding modular

plate etc. as required. Each 20.00

1.27 MODGIBXCP S/F modular boxes, base & cover plate :

Supplying and fixing following size / modules, GI box

along with modular base & cover plate for modular

switches in recess etc as required.

1.27.1 1 or 2 Module (75mm X 75mm) Each 88.00

1.27.2 4 Module (125mm X 75mm) Each 113.00






9/27

Code

No.


Rs.

1.28 MODCP S/F modular base & cover plate :

Supplying and fixing following Modular base & cover plate

on existing modular metal boxes etc. as required.

128.1 1 or 2 Module Each 51.001.28.2 4 Module Each 71.00

1.28.3 6 Module Each 98.00

1.28.4 8 Module Each 113.00

1.28.5 12 Module Each 145.00

1.29 LPACCPT S/F light plug point piano type accessories :

Supplying and fixing metal box of 150mm X 75mm X

60mm deep (nominal size) on surface or in recess with

suitable size of phenolic laminated sheet cover in front

including providing and fixing 3 pin 5/6 amps socket outlet

and 5/6 amps piano type switch, connection, painting etc.as required. (For light plugs to be used in non residential

buildings). Each 102.00

1.30 PPACCPT S/F power plug point piano type accessories :

Supplying and fixing metal box of 180mm X 100mm X

60mm deep (nominal size) on surface or in recess with

suitable size of phenolic laminated sheet cover in front

including providing and fixing 6 pin 5/6 & 15/16 amps

socket outlet and 15/16 amps piano type switch,

connection, painting etc. as required. Each 161.00

1.31 LPACCMOD S/F light plug point modular type accessories :

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

providing and fixing 3 pin 5/6 amps modular socket outlet

and 5/6 amps modular switch, connection, painting etc. as

required. (For light plugs to be used in non residential

buildings). Each 160.00

1.32 PPACCMOD S/F power plug point modular type accessories :

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, includingproviding and fixing 6 pin 15/16 & 5/6 amps modular

socket outlet and 15/16 amps modular switch, connection,

painting etc. as required. Each 214.00

1.33 CREB S/F ceiling rose :

Supplying and fixing 3 pin, 5 amp ceiling rose on the

existing junction box / wooden block including connection

etc as required. Each 19.00



10/27

Code

No.


Rs.

1.34 BRHOLD S/F brass holder :

Supplying and fixing brass batten / angle holder including

connection etc. as required. Each 33.00

1.35 ERINCFIT Erection of incandecent light fittings :

Erection of wall bracket / ceiling fittings of all sizes and

shapes containing upto two GLS lamps per fitting,

complete with all accessories including connection ect. as

required. Each 19.00

1.36 STPEN300 S/F 300 mm stiff pendent with wiring :

Supplying and fixing stiff pendent with 300 mm long, 20

mm dia X 1.6 mm thick steel conduit, aluminium cast back

plate and brass holder complete, including wiring the down

rod with 1.5 sq.mm FR PVC insulated, copper conductor,

single core cable and painting etc. as required.

Each 75.00

1.37 STPEN600 S/F 600mm stiff pendent with wiring :

Supplying and fixing stiff pendnet with 600 mm long, 20

mm dia X 1.6 mm thick steel conduit, aluminium cast back

plate and brass holder complete, including wiring the down

rod with 1.5 sq.mm FR PVC insulated, copper conductor,

single core cable and painting etc. as required.

Each 93.00

1.38 CALLBELL S/F call bell / buzzer :

Supplying and fixing call bell / buzzer suitable for D.C /

A.C single phase, 230 volts, complete as required.Each 26.00

1.39 TTCABCON S/F twin twisted, cable in sleeve or conduit :

Providing and fixing plain 16/0.20 mm twin twisted,

flexible, FR PVC insulated, copper cable, in polythene

sleeve, or conduit of suitable size on the floor / wall, or

side of the table / door etc. as required.Metre 14.00

1.40 FLCABCON S/F flat cable in sleeve or conduit :

Providing and fixing plain 16/0.20 mm twin FR PVC

insulated, PVC sheathed, flat flexible copper cable on the

floor / wall, or side of the table /door etc. as required.

Metre 10.00



11/27

Code

No.


Rs.

1.41 ITCFFSUR ITC fluorescent fitting directly on surface :

Installation, testing and commissioning of pre-wired

fluorescent fitting / compact flurescent fitting of all types,

complete with all accessories and tube etc. directly on

ceiling / wall, including connection with 1.5 sq.mm FR PVCinsulated, copper conductor, single core cable and

earthing etc. as required. Each 43.00

1.42 ITCFFDR ITC fluorescent fitting with down rods :

Installation, testing and commissioning of pre-wired

fluorescent fitting / compact flurescent fitting of all types,

complete with all accessories and tube etc. including

supplying and fixing ball and socket thick arrangement, 2

no. down rods of 20mm dia X 1.6 mm thick steel conduit

upto 30 cm length, painting and wiring the down rods and

connection with 1.5 sq.mm FR PVC insulated, copperconductor, single core cable and earthing etc. as required.

Each 126.00

1.43 EXTDR S/F extra down rod :

Providing and fixing extra conduit down rod of 20 mm dia,

2 X 10 cm length wiring with 2 X 1.5 sq.mm FR PVC

insulated, copper conductor, single core cable including

painting etc. as required. (Note : More than 5 cm length

shall be rounded to nearest 10 cm and 5 cm or less shall

be ignored) Each 17.00

1.44 ITCCF ITC ceiling fan :

Installation, testing and commissioning of ceiling fan

including wiring the down rods of standing length (upto 30

cm) with 1.5 sq.mm FR PVC insulated, copper conductor,

single core cable etc. as required. Each 45.00

1.45 ITCCFFC ITC ceiling fan with cover on fan box :

Installation, testing and commissioning of ceiling fan,

including wiring the down rods of standard length (upto 30

cm) with 1.5 sq.mm FR PVC insulated copper conductor,

single core cable, including providing and fixing phenoliclaminated sheet cover on the fan box etc. as required.

Each 68.00

1.46 ITCFR S/F resistance type ceiling fan regulator :

Installation, testing and commissioning of resistance type

ceiling fan regulator, in existing switch box inluding

connection with 1.5 sq.mm FR PVC insulated, copper

conductor, single core cable, earthing the regulator etc. as




12/27

Code

No.


Rs.

1.47 EXTCUTPIP Cutting and threading down rod :

Extra for cutting and threading of G.I pipe, heavy gauge

down rod, for ceiling fan etc. as required. Each 10.00

1.48 EXTPIP15 Extra down rod 15mm dia :

Supplying and fixing extra down rod of 10 cm length G.I.

pipe, 15mm dia, heavy gauge including painting etc. as

required. (Note : More than 5 cm length shall be rounded

to the nearest 10 cm and 5 cm or less shall be ignored).Each 13.00

1.49 EXTPIP20 Extra down rod 20mm dia :

Supplying and fixing extra conduit down rod of 20 cm

length G.I pipe, 15 mm dia, heavy gauge including painting

etc. as required. (Note : More than 5 cm length shall be

rounded to the nearest 10 cm and 5 cm or less shall be

ignored). Each 14.00

1.50 CARFAN Carriage of fan :

Carriage of ceiling fan and regulator / exhaust fan from

store to site as required. Each 8.00

1.51 NUMFANFT Numbering of fan / fittings :

Numbering of ceiling fan / exhaust fan / fluorescent fittings

as required. Each 10.00

1.52 ITCEF450 ITC exhaust fan upto 450 mm sweep :

Installation of exhaust fan upto 450 mm sweep in theexisting opening, including making the hole to suit the size

of the above fan, making good the damage, connection,

testing, commissioning etc. as required. Each 223.00

1.53 ITCEF510 ITC exhasut fan upto 510 mm sweep :

Installation of exhasut fan upto 510 mm sweep in the

existing opening, including making the hole to suit the size

of the above fan, making good the damage, connection,

testing, commissioning etc. as required. Each 325.00

1.54 LOUSHEF Fixing louvers / shutters for exhaust fan :Extra for fixing the louvers / shutters complete with frame

for exhaust fam of all sizes : Each 65.00

1.55 PAINTFAN Painting of ceiling fan :

Painting of ceiling fan in installed position with one or mor

coats of spray painting with synthetic enamel paint of

approved brand and manufacture to give an even shade,

including cleaning of surface with detergent etc. as




13/27

Code

No.


Rs.

BUS TRUNKING AND OVER HEAD BUSBAR SYSTEM

2.11 RM S/F rising mains :Supplying, installing on wall, testing and commissioning of

following capacity rising mains with metal clad enclosure,

wall straps, fully PVC insulated TPN aluminium busbars in

convenient sections and suitable for 400/650 volts, 3

phase, 4 wire, 50 Hz. A.C supply with extension joints , fire

proof barriers, expansion joints, thrust pads including

jointing and earthing with 2 runs of galvanised iron strips

etc. as required. (Rising mains confirming to IS 8623, TEC

439).

2.11.1 200 amps (SC rating for 1 sec. - 15 KA) Metre 4146.00





2.12 RMTB S/F TPN tap-off box with HRC fuses :

Supplying, installating testing and commissioning of TPN

tap off box following capacity on existing rising mains and

complete with HRC fuse links, interconnections, earthing

etc. as required.

2.12.1 16 amps TPN Each 2399.00

2.12.2 32 amps TPN Each 3665.00

2.12.3 63 amps TPN Each 6488.00

2.12.4 100 amps TPN Each 9185.00

2.12.5 200 amps TPN Each 9666.00

2.13 RMDTB S/F distribution tap-off box with HRC fuses :

Supplying, installing, testing and commissioning of

distribution tap off box of following capacity on existing

rising mains and complete with HRC fuse links,

interconnections, earthing etc. as required.

2.13.1 16 amps TPN, 2 way Each 3293.00

2.13.2 16 amps TPN, 4 way Each 4882.00

2.13.3 16 amps TPN, 6 way Each 6855.00

2.13.4 16 amps TPN, 8 way Each 7608.00

2.13.5 32 amps TPN, 2 way Each 4354.00

2.13.6 32 amps TPN, 4 way Each 6552.00

2.13.7 32 amps TPN, 6 way Each 10481.00

2.0 BOARD & DB's

SUB HEAD-2.0 BOARD DB's 13


14/27

Code

No.


Rs.2.13.8 32 amps TPN, 8 way Each 12498.00

2.13.9 63 amps TPN, 2 way Each 7672.00

2.13.10 63 amps TPN, 4 way Each 11000.00

2.13.11 63 amps TPN, 6 way Each 15429.00

2.13.12 63 amps TPN, 8 way Each 21356.00

2.13.13 100 amps TPN, 4 way Each 21895.002.13.14 100 amps TPN, 6 way Each 32867.00

2.13.15 100 amps TPN, 8 way Each 43751.00

2.14 RMADB S/F adopter box with cable end box and gland :

Supplying, installing, testing and commissioning of

adopter box of following capacity on existing rising mains

and complete with stand, cable end-box brass

compression gland, interconnections, earthing etc. as

required.

2.14.1 200 amps TPN Each 7790.00

2.14.2 300 amps TPN Each 9221.00

2.14.3 400 amps TPN Each 9668.00

2.14.4 600 amps TPN Each 12060.00

2.14.5 800 amps TPN Each 13518.00

2.15 BT S/F bus trunking :

Supplying, installation, including suspension, testing and

commissioning of bus trunking arrangement in convenient

sections complete with aluminium busbars for use on, 3

phase, 4 wire, 415 volts, 50 Hz. A.C. supply for following

current capacity, including jointing of sections, flexible

joints, expension joints, bends and earthing with 2 runs ofgalvanised iron strips etc. as required.

2.15.1 800 amps Metre 7832.00

2.15.2 1000 amps Metre 8787.00

2.15.3 1250 amps Metre 9676.00

2.15.4 1400 amps Metre 11536.00

2.15.5 1600 amps Metre 13542.00

2.16 OHBB S/F OH busbars :

Supplying, installation, including suspension, testing andcommissioning of triple pole and neutral overhead

aluminium busbars in sheet steel enclosure in convenient

sections with top and bottom covers suitable for use on, 3

phase, 4 wire, 415 volts, 50 Hz. A.C. supply and of

following rating complete with interconnections, earthing

with 2 runs of galvanised iron strips etc. as required.



15/27

Code

No.


Rs.

2.16.1 200 amps Metre 2603.00

2.16.2 400 amps Metre 3875.00

2.17 OHBBPB S/F plug -in box

Supplying, installing, testing and commissioning of TPN

plug-in box of following capacity on existing overhead

busbar system complete with HRC fuse links, electrical

interconnections, earthing etc. as required.

2.17.1 32 amps Each 1947.00

2.17.2 63 amps Each 2885.00

2.17.3 100 amps Each 5730.00

METAL CLAD SFU WITH HRC FUSES & MCCB's

2.21 CUBTPN S/F TP&N FSU in cubicle panel board :

Providing and fixing following capacity TP&N disconnector

fuse switch unit inside the existing cubicle panel board

with ISI marked HRC fuses including drilling holes in

cubicle panel, making connections, etc. as required.

2.21.1 32 Amp TP&N Each 768.00

2.21.2 63 Amp TP&N

Each 1128.002.21.3 100 Amp TP&N Each 2308.00

2.21.4 125 Amp TP&N Each 2621.00

2.21.5 160 Amp TP&N Each 3175.00

2.21.6 200 Amp TP&N Each 3520.00

2.21.7 320 Amp TP&N Each 5479.00

2.21.8 400 Amp TP&N Each 6731.00

2.22 MCCB S/F MCCB in cubicle panel board :

Providing and fixing following rating and breaking capacity

MCCB in existing cubicle panel board including drillingholes in cubicle panel, making connections, etc. as

required.

2.22.1 100 Amp, 10 KA Each 1613.00

2.22.2 100 Amp, 16 KA Each 2361.00

2.22.3 125 Amp, 16 KA Each 3592.00



16/27

Code

No.


Rs.2.22.4 160 Amp, 16 KA Each 3932.00

2.22.5 200 Amp, 16 KA Each 4209.00

2.22.6 200 Amp, 25 KA Each 5501.00

2.22.7 250 Amp, 25 KA Each 6524.00

2.22.8 250 Amp, 35 KAEach 8564.002.22.9 315 Amp, 35 KA Each 11631.00

2.22.10 400 Amp, 35 KA Each 11631.00

2.22.11 500 Amp, 35 KA Each 12802.00

2.22.12 630 Amp, 35 KA Each 12802.00

2.22.13 800 Amp, 35 KA Each 15726.00

MCB DISTRIBUTION BOARDS

2.31 SPMCBDB S/F SP MCB DB :

Supplying and fixing following way, single pole andneutral, sheet steel, MCB distribution board, 240 volts, on

surface / recess, complete with tinned copper busbar,

neutral busbar, earth bar, din bar, detachable gland plate,

interconnections, phosphatized and powder painted

including earthing etc. as required. (But without MCB /

RCCB / Isolator).

2.31.1 4 way, single door Each 301.00




2.31.5 4 way, double door Each 450.00




2.32 SPMCBDBCO S/F SP MCB DB consumer unit :

Supplying and fixing following way, single pole and

neutral, sheet steel, MCB distribution board consumer

unit, 240 volts, on surface / recess, complete with tinned

copper busbar, neutral busbar, earth bar, din bar, hingedfront acrylic cover for the MCB knobs, detachable gland

plate, interconnections, phosphatized and powder painted


RCCB / Isolator).

2.32.1 2 + 4 way Each 559.00



17/27

Code

No.


Rs.2.32.2 2 + 8 way Each 654.00

2.32.3 2 + 12 way Each 753.00

2.32.4 2 + 16 way Each 850.00

2.33 TPMCBDB S/F TP MCB DB :

Supplying and fixing following way, three pole and neutral,sheet steel, MCB distribution board, 415 volts, on surface /

recess, complete with tinned copper busbar, plate,

interconnections, phosphatized and powder painted


RCCB / Isolator).

2.33.1 4 way (4 + 12), single door, horizontal type Each 820.00



2.33.4 4 way (4 + 12), double door, horizontal type Each 1311.00

2.33.5 6 way (4 + 18), double door, horizontal type Each 1634.002.33.6 8 way (4 + 24), double door, horizontal type Each 1803.00

2.34 PWSPMCBDB S/F Pre-wired SP MCB DB :

Supplying and fixing following way, single pole and

neutral, prewired, sheet steel, MCB distribution board, 240

volts, on surface / recess, complete with loose wire box,

terminal blocks, tinned copper busbar, neutral link, earth

bar, din bar, detachable gland plate, earthing etc. as

required. (But without MCB/RCCB/Isolator).







2.35 VTTPMCBDB S/F vertical type TP MCB DB :

Supplying, installation, testing and commissioning of

surface / recess mounting, vertical type, 415 volts, TPN

MCB distribution board of sheet steel, dust protected, dulyphosphatized and powder painted, inclusive of 200 amps

tinned copper busbar, common neutral link, earth bar, din

bar for mounting MCB's detachable gland / knock out

plate, and with 100 amps, 10KA MCCB as incomer

interconnection between incomer MCCB and busbars of

following ways (but without MCB's) as required.



18/27

Code

No.


Rs.(Note : Vertical type MCB TP DB is normally used where 3

phase outlets are required).

2.35.1 4 way with 100 amps MCCB as incomer Each 2992.00



PRE-WIRED MCB DISTRIBUTION BOARDS

2.41 PWSPMCBDB S/F prewired SP MCB DB :

supplying and fixing following way, single pole and neutral,

prewired, sheet seel, MCB distribution board, 240 volts, on

surface / recess, complete with loose wire box, terminal

blocks, duly prewired with suitable size FR PVC insulated

copper conductor up to terminal blocks, tinned copper

busbar, neutral link, earth bar, din bar, detachable gland


including earthing etc. as required. (But without MCB

/RCCB/ Isolator).

2.41.1 2 + 4 way, single door Each 1453.00



2.41.4 2 + 4 way, double door Each 2139.00

2.41.5 2 + 8 way, double door Each 3024.00

2.41.6 2 + 12 way, double doorEach 3959.00

2.42 PWTPMCBDB S/F prewired TP MCB DB :

Supplying and fixing following way, three pole and neutral,

prewired, sheet steel, MCB distribution board, 415 volts,

on surface / recess, complete with loose wire box, terminal

blocks, duly prewired with suitable size FR PVC insulatd

copper conductor up to terminal blocks, tinned copper

busbar, neutral link, earth bar, din bar, detachable gland



RCCB /Isolator).

2.42.1 4 way (4 + 12), single door Each 4834.00




2.42.5 4 way (4 + 12), double door Each 5395.00



19/27

Code

No.


Rs.2.42.6 6 way (4 + 18), double door Each 6941.00



2.43 PWVTMCBDB S/F vertical type prewired SP MCB DB :

Supplying, installation, testing and commissioning of

surface / recess mounting, vertical type, 415 volts,

prewired, TPN MCB distribution board of sheet steel, dust

protected, duly phosphatized and powder painted inclusive

of 200 amps tinned copper busbar, common neutral link,

earth bar, din bar for mounting MCB's, detachable gland /

knock out plate, and with built in loose wire box, and

superior make terminal connectors for all incoming and

outgoing circuits, duly prewired with adquate size of FR

PVC insulated copper conductor upto the terminal

connector / neutral link and ready for installation of

following ways (but without MCB's and incomer) asrequired.

(Note : Prewired vertical type MCB TP DB is normally

used where 3 phase outlets are required.)

2.43.1 4 way single door Each 6405.00




2.43.5 4 way double door Each 6717.002.43.6 6 way double door Each 8649.00

2.43.7 8 way double door Each 10394.00

2.43.8 12 way double door Each 12451.00

MCB's

2.51 MCBB S/F 'B' serires, SP MCB :

Supplying and fixing 5 amps to 32 amps rating, 240 volts,

'B' series, miniature circuit breaker suitable for lighting and

other loads of following poles in the existing MCB DBcomplete with connections, testing and commissioning

etc. as required.

2.51.1 Single pole Each 86.00

2.51.2 Single pole and neutral Each 171.00

2.51.3 Triple pole Each 273.00

2.51.4 Triple pole and neutral Each 352.00



20/27

Code

No.


Rs.

2.52 MCBC S/F 'C' series, SP MCB :

Supplying and fixing 5 amps to 32 amps rating, 240 volts,

'C' series, miniature circuit breaker suitable for inductive

load of following poles in the existing MCB DB complete

with connections, testing and commissioning etc. asre uired.

2.52.1 Single pole Each 94.00

2.52.2 Single pole and neutral Each 243.00

2.52.3 Triple pole Each 386.00

2.52.4 Triple pole and neutral Each 502.00

2.53 MCBBP S/F 'B' series, SP MCB blanking plate :

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required. Each 2.00

2.54 MCBDPIS S/F DP MCB isolator :

Supplying and fixing following rating, double pole, 240

volts, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

2.54.1 40 amps Each 166.00

2.54.2 63 amps Each 196.00

2.55 MCBTPIS S/F TP MCB isolator :

Supplying and fixing following rating, four pole, 415 volts,isolator in the existing MCB DB complete with


2.55.1 40 amps Each 345.00

2.55.2 63 amps Each 362.00

2.55.3 100 amps Each 460.00

2.56 RCCBSPN S/F SPN RCCB :

Supplying and fixing following rating, double pole, (single

phase and neutral), 240 volts, residual current circuit

breaker (RCCB), having a sensitivity current upto 300

milliamperes in the existing MCB DB complete with


2.56.1 25 amps Each 949.00

2.56.2 40 amps Each 1007.00

2.56.3 63 amps Each 1343.00



21/27

Code

No.


Rs.

2.57 RCCBTPN S/F TPN RCCB :

Supplying and fixing following rating, four pole, (three

phase and neutral), 415 volts, residual current circuit

breaker (RCCB), having a sensitivity current upto 300

milliamperes in the existing MCB DB complete withconnections, testing and commissioning etc. as required.

2.57.1 25 amps Each 1168.00

2.57.2 40 amps Each 1208.00

2.57.3 63 amps Each 1426.00

2.61 MCBDPSOC10 S/F 10A SPN MCB industrial socket outlet :

Supplying and fixing 10 amps, 240 volts, SPN industrial

type, socket outlet, with 2 pole and earth, metal enclosed

plug top along with 10 amps 'C' series, SP, MCB, in sheet

steel enclosure, on surface or in recess, with chained

metal cover for the socket outlet and complete with

connections, testing and commissioning etc. as required.Each 509.00

2.62 MCBDPSOC20 S/F 20A SPN MCB industrial socket outlet :

Supplying and fixing 20 amps, 240 volts, SPN industrial


plug top along with 20 amps 'C' series, SP, MCB, in sheet




2.63 MCBTPSOC20 S/F 20A TPN MCB industrial socket outlet :

Supplying and fixing 20 amps, 240 volts, TPN industrial


plug top along with 20 amps 'C' series, TP MCB, in sheet




2.64 MCBTPSOC30 S/F 30A TPN MCB industrial socket outlet :

Supplying and fixing 30 amps, 240 volts, TPN industrial


plug top along with 30 amps 'C' series, TP MCB, in sheet






22/27

Code

No.


Rs.

2.71 DANPLMV P/F M.V. danger notice plate :

Providing and fixing M.V. danger notice plate of 200 mm X

150 mm, made of mild steel at least 2 mm thick, and

vitreous enamelled white on both sides and withinscription in single red colour on front side as required.

Each 68.00

2.72 DANPLHV P/F H.V. danger notice plate :

Providing and fixing H.T. danger notice plate of 250 mm X

200 mm, made of mild steel, at least 2 mm thick and

vitreous enamelled white on both sides and with

inscription in single red colour on front side as required.

Each 75.00



23/27

Code

No.


Rs.

3.1 EARGIPIP G.I. earth pipe electrode :

Earthing with G.I. earth pipe 4.5 mtr. Long, 40 mm diaincluding accessories and providing masonary enclosure with

cover plate having locking arrangement and watering pipe etc.

(But without charcoal or coke and salt) as required.

Set 1496.00

3.2 EARPIPCHAR G.I. earth pipe electrode with salt / charcoal :

Earthing with G.I. earth pipe 4.5 mtr. Long, 40 mm dia

including accessories and providing masonary enclosure with

cover plate having locking arrangement and watering pipe etc.

with charcoal and salt as required. Set 1971.00

3.3 EARCHARPIP Salt / charcoal for pipe earth electrode :

Extra for using salt and charcoal for pipe earth electrode as

required. Set 475.00

3.4 EARCOKPIP Salt / coke for pipe earth electrode :

Extra for using salt and coke for pipe earth electrode as

required. Set 1063.00

3.5 EARGIPL G.I. earth plate electrode :

Earthig with copper earth plate 600 mm X 600 mm X 3 mm

thick including accessories and providing masonary enclosure

with cover plate having locking arrangement and wateringpipe etc. (but without charcoal or coke and salt) as required.

Set 1585.00

3.6 EARCUPL Copper earth plate electrode :

Earthing with copper earth plate 600 mm X 600 mm X 3 mm

thick including accessories and providing masonary enclosure

with cover plate having locking arrangement and watering

pipe etc. (but without charcoal or coke and salt) as required.Set 3263.00

3.7 EARCHARPL Salt / charcoal for plate earth electrode :

Extra for using slat and coke for G.I. or copper plate earth

electrode as required. Set 603.00

3.8 EARCOKPL Salt / coke for plate earth electrode :

Extra or using slat and coke for G.I. or copper plate earth

electrode as required. Set 1484.00

3.9 EAR8GCUWR S/L 8 SWG copper wire in ground :

3.0 EARTHING

SUB HEAD-3.0 EARTHING 23


24/27

Code

No.


Rs.

Supplying and laying 8 SWG copper wire at 0.50 metre below

ground level for conductor earth electrode, including soldering

etc. as required. Metre 41.00

3.10 EAR6GGIWR S/L 6 SWG GI wire in ground :

Supplying and laying 6 SWG G.I. wire at 0.50 metre belowground level for conductor earth electrode, including soldering

etc. as required. Metre 16.00

3.11 EARG125X5 S/L 25 mm X 5 mm G.I. earth strip in ground :

Supplying and laying 25 mm X 5 mm G.I. strip at 0.50 metre

below ground as strip earth electrode, including soldering etc.

as required. Metre 45.00

3.12 EARG125X6 S/L 25 mm X 6 mm G.I. earth strip in ground :

Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre

below ground as strip earth electrode, including soldering etc.as required. Metre 60.00

3.13 EARCUSTPIP P/F 25 mm X 5 mm copper earth strip in pipe :

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia

G.I. pipe from earth electrode, as required. Metre 494.00

3.14 EARGISTPIP P/F 25 mm X 5 mm GI earth strip in pipe :

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia

G.I. pipe from earth electrode, as required. Metre 218.00

3.15 EARGIWRPIP P/F 6 SWG GI earth wire in pipe :

Providing and laying earth connection from earth electrode

with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth

electrode, as required. Metre 86.00

3.16 EARCUWRPIP P/F 4 mm copper earth wire in pipe :

Providing and laying earth connection from earth electrode

with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from

earth electrode, as required. Metre 111.00

3.17 EARCUSTSUR P/F 25 mm X 5 mm copper earth strip in surface/ recess:

Providing and fixing 25 mm X 5mm copper strip on surface or

in recess for connections etc. as required. Metre 358.00

3.18 EARGISTSUR P/F 25 mm X 5 mm GI earth strip in surface / recess :

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

recess for connections etc. as required. Metre 66.00

3.19 EARGIWRSUR P/F 6 SWG GI loop earthing wire in surface / recess :



25/27

Code

No.


Rs.

Providing and fixing 6 SWG dia G.I wire on surface or in

recess for loop earthing as required. Metre 24.00

3.20 EARCUWRSUR P/F 4 mm copper loop earthing wire in surface / recess : Metre 49.00

Providing and fixing 4.00 mm dia copper wire on surface or in

recess for loop earthing as required.

3.21 EARGIWRLO P/F 6 SWG GI earth wire with conduit / cable :

Providing and fixing 6 SWG dia G.I. wire on surface or in

recess for loop earthing along with existing surface / recessed

conduit / submian wiring / cable as required. Metre 11.00

3.22 EARCUWRLO P/F 4 mm copper earth wire with conduit / cable :

Providing and fixing 4.00 mm dia copper wire on surface or in

recess for loop earthing along with existing surface / recessed

conduit / submain wiring / cable as required. Metre 36.00

3.23 EARBUS P/F 50 mm X 5 mm earth bus on surface :

Providing and fixing earth bus of 50 mm X 5 mm copper strip

on surface for connections etc. as required. Metre 665.00



26/27

Code

No.


Rs.

4.1 LCFCU P/F copper lightning conductor finial :

Providing and fixing of lightning conductor finial, made of 25mm dia 300 mm long, copper tube having single prong at top,

with 85 mm dia 3 mm thick copper base plate including holes

etc. complete as required. Each 477.00

4.2 LCFGI P/F GI lightning conductor finial :

Providing and fixing of lightning conductor finial, made of 25

mm dia 300 mm long, G.I. tube, having single prong at top,

with 85 mm dia 6 mm thick G.I. base plate including holes etc.

complete as required. Each 243.00

4.3 FIXLCF Fixing lightning conductor finial :Fixing of lightning conductor finial, made of 25 mm dia 300

mm long copper tube / G.I. tube, having single prong at top

with 85 mm dia 3 mm thick copper base plate including holes

etc. complete as required. Each 90.00

4.4 LCRSS Reverting, sweating and soldering lightning conductor tape:

Reverting, sweating and soldering copper / G.I. tape (with

another copper / GI tape, base of the finial or any other

metallic object) as required. Each 56.00

4.5 LCCUTSURH P/F copper lightning conductor tape in horizontal run :

Providing and fixing copper tape 20 mm X 3 mm thick on

parapet or surface of wall for lightning conductor complete as

required. (For horizontal run) Metre 163.00

4.6 LCCUTSURV P/F copper lightning conductor tape in vertical run :

Providing and fixing copper tape 20 mm X 3 mm thick on

parapet or surface of wall for lightning conductor complete as

required. (For vertical run) Metre 175.00

4.7 LCGITSURH P/F GI lightning conductor tape in horizontal run :

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet

or surface of wall for lightning conductor complete as required.

(For horizontal run) Metre 31.00

4.8 LCGITSURV P/F GI lightning conductor tape in vertical run :

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet

or surface of wall for lightning conductor complete as required.

(For vertical run) Metre 43.00

4.0 LIGHTNING CONDUCTOR

SUB HEAD-4.0 LIGHTNING CONDUCTOR 26


27/27

Code

No.


Rs.

4.9 FIXLCTSURH Fixing lightning conductor tape in horizontal run :

Fixing of copper / G.I. tape 20 mm X 3mm thick on parapet or

surface of wall for lightning conductor complete as required.

(For horizontal run) Metre 15.00

4.10 FIXLCTSURV Fixing lightning conductor tape in vertical run :

Fixing of cpper / G.I. tape 20 mm X 3 mm thick on parapet or

surface of wall for lightning conductor complete as required.

(For vertical run)Metre 27.00

4.11 LCTJCU P/F testing joint for copper lightning conductor :

Providing and fixing testing joint, made of 20 mm X 3 mm thick

copper strip, 125 mm long, with 4 nos. of tinned brass bolts,

nuts, check nuts and spring washers etc. complete as

re uired. Each 108.00

4.12 LCTJGI P/F testing joint for GI lightning conductor :

Providing and fixing testing joint, made of 20 mm X 3 mm thick

G.I. strip, 125 mm long with 4 nos. of G.I. bolts, nuts check

nuts and spring washers etc. complete as required.

Each 37.00

4.13 LCEARCUT P/L copper earth tape for lightening conductor

Providing and laying copper tape 32 mm X 6 mm from earth

electrode directly in ground as required.Metre 475.00

4.14 LCEARGIT P/L GI earth tape for lighting conductor :

Providing and laying G.I. tape 32 mm X 6 mm from earth

electrode directly in ground as required. Metre 65.00

4.15 FIXLCEART Laying earth tape for lightning conductor :

Laying copper / G.I. tape 32 mm X 6 mm from earth electrode

directly in ground as required.

Metre 13.00

DSR - Schedule of Rates -Internal

Documents

Transcript of DSR - Schedule of Rates -Internal