DSE7570 Data Sheet

2
The DSE7570 Sync Lock Controller has been designed for manual connection and disconnection from the mains (utility) supply. The Sync Lock Controller provides a user- friendly zero-sync/phase locking solution, that is easily integrated with generators controlled by the DSE7510 or DSE8610 Load Share module. With forward and backward synchronising with the mains/utility supply, the DSE7570 is ideal for temporary generator installations. Where access is restricted, the DSE Sync Lock Interface is used to provide up to a maximum distance of 200 m between the DSE7570 Sync Lock Controller and the DSE7510 or DSE8610 Load Share module. DSE7570 REMOTE SYNC LOCK CONTROLLER DSEGenset ® FEATURES ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30 o C BS EN 60068-2-2 Bb/Be Dry Heat +70 o C VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 o C @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 o C @ 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 mS DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529 IP67 - When case is closed. 1ph 2ph 3ph N 1ph 2ph 3ph N VOLTS GENERATOR SENSING VOLTS DC POWER SUPPLY 8-35V MAINS (UTILITY) SENSING ISSUE 1 COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF GEN-SET HIRE APPLICATIONS 7 OTHER DSE7570 MSC LINK 7570 7510/8610

description

DSE7570

Transcript of DSE7570 Data Sheet

The DSE7570 Sync Lock Controller has beendesigned for manual connection anddisconnection from the mains (utility) supply.

The Sync Lock Controller provides a user-friendly zero-sync/phase locking solution,that is easily integrated with generatorscontrolled by the DSE7510 or DSE8610 LoadShare module. With forward and backwardsynchronising with the mains/utility supply,the DSE7570 is ideal for temporary generatorinstallations.

Where access is restricted, the DSE SyncLock Interface is used to provide up to amaximum distance of 200 m between theDSE7570 Sync Lock Controller and theDSE7510 or DSE8610 Load Share module.

DSE7570REMOTE SYNC LOCK CONTROLLER

DSEGenset

®

FEATURES

ENVIRONMENTAL TESTING STANDARDS

ELECTRO-MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for the Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for the Industrial Environment

ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment, including Electrical Business Equipment

TEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30 oCBS EN 60068-2-2Bb/Be Dry Heat +70 oC

VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn

HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55 oC@ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40 oC@ 93% RH 48 Hours

SHOCKBS EN 60068-2-27Three shocks in each of three major axes15 gn in 11 mS

DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP67 - When case is closed.

1ph2ph3phN

1ph2ph3phN

VOLTS

GENERATORSENSING

VOLTS

DC POWER SUPPLY 8-35V

MAINS (UTILITY) SENSING

ISSUE 1

COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETYOF GEN-SET HIRE APPLICATIONS

7

OTHER

DSE7570 MSC LINK

7570 7510/8610

DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com

DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com

055-085/11/10 (3)

KEY BENEFITS• Provides a user-friendly zero-sync/phase locking solution, idealfor temporary generatorinstallations, including forwardand backward synchronising withthe mains (utility)

• No-break removal and return ofmains (utility) fuses

• Interface provides applicationflexibility where access is limited

TYPICAL APPLICATIONS• Generator hire• Local sub-station maintenance,service and repairs

• Emergency power provision• Temporary power solutions

RELATED MATERIALSTITLE PART NO’SDSE7570 Installation Instructions 053-083DSE7570 Operator Manual 057-132DSE7510 Data Sheet 055-065DSE123 Data Sheet 055-044DSE8610 Data Sheet 055-083

SPECIFICATION

DC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V Continuous

CRANKING DROPOUTSAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT150 mA at 12 V, 80 mA at 24 V

MAXIMUM STANDBY CURRENT50 mA at 12 V, 30 mA at 24 V

MAINS (UTILITY) VOLTAGE RANGE15 V - 333 V AC (L-N)

FREQUENCY RANGE3.5 Hz to 75 Hz

GENERATORVOLTAGE RANGE 15 V - 333 V AC (L-N)

FREQUENCY RANGE3.5 Hz to 75 Hz

DIMENSIONSSYNC LOCK CASE406 mm x 330 mm x 174 mm(16.0" x 13.0" x 6.9")

INTERFACE BOX(To be ordered separately)122 mm x 120 mm x 55 mm(4.8” x 4.7” x 2.2”)

SYNC LOCK INTERFACE EXTENSION CABLE (NOT AVAILABLE FROM DSE)3 pair twisted individually screened cableMaximum 200 m (666 ft)

OPERATING TEMPERATURE RANGE-30°C to +70°C

STORAGE TEMPERATURE RANGE-40°C to +80°C

DSE7570 SYNC LOCK CONTROLLER

®

DSEGenset

FEATURES

Registered in England & Wales No.01319649VAT No.316923457

Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.

INTERFACE BOX*

DSE7510/DSE8610 GENERATOR CONTROLLER

DSE7570SYNC LOCK

GENERATOR SENSING

CONTROL CABLE(1.5m supplied)

customer extension possible*Connections from interface box to

DSE7510 / DSE8610 controller supplied(1.5m)

MAINS (UTILITY) SENSING