DSE7510...DEEP SEA ELECTRONICS INC USA 3230 Williams Avenue, Rockford, IL 61101-2668 USA TELEPHONE...
2
The DSE7510 is an Automatic Engine Control Module, designed to provide advanced load share functionality for diesel and gas generating sets that include electronic and non-electronic engines. The module’s load share functions include automatic synchronising with built-in synchroscope and closing onto dead bus. Direct and flexible outputs from the module are provided to allow connection to the most commonly used speed governors and automatic voltage regulators (AVRs). A sophisticated module monitoring an extensive number of engine parameters, the DSE7510 will annunciate engine shutdowns, warnings, and engine status information on the back-lit LCD screen, by illuminated LED, on a remote PC, by audible alarm and via SMS text alerts (GSM modem required). The module includes RS232 and RS485 ports as well as dedicated terminals for system expansion. MODULE CAPABILITIES • Fixed export with mains (utility) supply • Synchronising up to 16 gen-sets The module has sophisticated engine and power monitoring, high level instrumentation and flexible timers and alarms, making the system suitable for a wide range of synchronising applications. DSE7560 is required to synchronise with the mains (utility). DSE7510 AUTO START & LOAD SHARE CONTROL MODULE DSEGenset ® MODBUS DSE130 DSE157 1ph 2ph 3ph N 2 1ph 2ph 3ph E N 1ph 2ph 3ph N D + W/L 9 232 485 3 3 PC MODEM VOLTS CURRENT MSC 7510 7510 7560 + ISSUE 6 RS232 AND RS485 FUEL & CRANK OUTPUTS DC OUTPUTS ANALOGUE SENDERS EMERGENCY STOP DC POWER SUPPLY 8-35V MAGNETIC PICK-UP ELECTRONIC ENGINES CHARGE ALTERNATOR GENERATOR SENSING VOLT FREE OUTPUTS BUS SENSING DEUTZ ISUZU PERKINS CATERPILLAR MTU VOLVO CUMMINS SCANIA + DSE EXPANSION CONFIGURABLE INPUTS P810 COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF GEN-SET APPLICATIONS 7 OTHER DSE7510 FEATURES ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30 o C BS EN 60068-2-2 Bb/Be Dry Heat +70 o C VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 o C @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 o C @ 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 mS DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529 IP65 - Front of module when installed into the control panel with the supplied sealing gasket.
Transcript of DSE7510...DEEP SEA ELECTRONICS INC USA 3230 Williams Avenue, Rockford, IL 61101-2668 USA TELEPHONE...
The DSE7510 is an AutomaticEngine Control Module, designedto provide advanced load sharefunctionality for diesel and gasgenerating sets that includeelectronic and non-electronicengines.
The module’s load share functionsinclude automatic synchronisingwith built-in synchroscope andclosing onto dead bus. Direct andflexible outputs from the moduleare provided to allow connection tothe most commonly used speedgovernors and automatic voltageregulators (AVRs).
A sophisticated module monitoringan extensive number of engineparameters, the DSE7510 willannunciate engine shutdowns,warnings, and engine statusinformation on the back-lit LCDscreen, by illuminated LED, on aremote PC, by audible alarm andvia SMS text alerts (GSM modemrequired). The module includesRS232 and RS485 ports as well asdedicated terminals for systemexpansion.
MODULE CAPABILITIES• Fixed export with mains (utility)supply
• Synchronising up to 16 gen-sets
The module has sophisticatedengine and power monitoring, highlevel instrumentation and flexibletimers and alarms, making thesystem suitable for a wide range ofsynchronising applications.
DSE7560 is required to synchronisewith the mains (utility).
DSE7510AUTO START & LOAD SHARE CONTROL MODULE
DSEGenset
®
MODBUSDSE130DSE157
1ph2ph3phN
2 1ph2ph3phEN
1ph2ph3phN
D +W/L
9
232 485
3 3
PCMODEM
VOLTSCURRENT
MSC
7510 7510 7560
+
ISSUE 6
RS232 ANDRS485
FUEL & CRANKOUTPUTS
DC OUTPUTS ANALOGUESENDERS
EMERGENCY STOP
DC POWER SUPPLY 8-35V
MAGNETICPICK-UP
ELECTRONIC ENGINES
CHARGEALTERNATOR
GENERATOR SENSINGVOLT FREEOUTPUTS
BUSSENSING
DEUTZISUZUPERKINSCATERPILLARMTUVOLVOCUMMINSSCANIA
+
DSEEXPANSION
CONFIGURABLEINPUTS
P810
COMPREHENSIVE FEATURE LIST TO SUIT AWIDE VARIETY OF GEN-SET APPLICATIONS
7
OTHER
DSE7510
FEATURES
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for the Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for the Industrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment, including Electrical Business Equipment
TEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30 oCBS EN 60068-2-2Bb/Be Dry Heat +70 oC
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn
HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55 oC@ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40 oC@ 93% RH 48 Hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15 gn in 11 mS
DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP65 - Front of module when installed into thecontrol panel with the supplied sealing gasket.
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
055-065/08/10 (6)
RELATED MATERIALSTITLE PART NO’SDSE7510 Installation Instructions 053-052DSE7500 Quick Start Guide 057-100 DSE7510 Operator Manual 057-088DSE7500 PC Software Manual 057-078Load Share Design and Commissioning 057-047Guide to Synchronising and Load Sharing 057-045/6
OTHER RELATED MATERIALSTITLE PART NO’SDSE7560 Data Sheet 055-067DSE124 Data Sheet 055-082CAN and DSE Wiring Guide 057-004
SPECIFICATION
DC SUPPLY8 V to 35 V continuous
CRANKING DROPOUTSAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT460 mA at 12 V, 245 mA at 24 V
MAXIMUM STANDBY CURRENT375 mA at 12 V, 200 mA at 24 V
CHARGE FAIL/EXCITATION RANGE0 V to 35 V
OUTPUTSOUTPUT A (FUEL)15 A DC at supply voltage
OUTPUT B (START)15 A DC at supply voltage
OUTPUTS C & D8 A 250 V (Volt free)
AUXILIARY OUTPUTS E,F,G2 A DC at supply voltage
GENERATORVOLTAGE RANGE 15 V - 333 V AC (L-N)
FREQUENCY RANGE3.5 Hz to 75 Hz
MAGNETIC PICK UPVOLTAGE RANGE+/- 0.5 V to 70 V
FREQUENCY RANGE10,000 Hz (max)
BUILT-IN GOVERNOR CONTROLFully IsolatedMinimum Load Impedance:1000ΩGain Volts 0 V - 10 V DCOffset Volts + / - 10 V DC
BUILT-IN AVR CONTROLFully IsolatedMinimum Load Impedance: 1000ΩGain Volts 0 V - 10 V DCOffset Volts + / - 10 V DC
DIMENSIONSOVERALL240 mm x 172 mm x 57 mm9.4” x 6.8” x 2.2”
PANEL CUTOUT220 mm x 160 mm8.7” x 6.3”
MAXIMUM PANEL THICKNESS8 mm0.3”
DSE7510AUTO START & LOAD SHARE CONTROL MODULE
®
DSEGenset
FEATURES
Registered in England & Wales No.01319649VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.
KEY LOAD SHARE FEATURES• Fixed export with mains (utility)• Synchronising up to 16 generators• Sequential start• Auto ID negotiation• Direct governor and AVRcommunication and control
• Manual voltage, frequency andspeed adjustment
• Volts and frequency matching• Dead bus sensing• Generator load demand• kW and kV Ar load sharing• kW on mains (utility) level• Automatic hours run balancing• R.O.C.O.F & Vector Shift• Mains (utility) decoupling testfacility
KEY FEATURES• 4-Line back-lit LCD text display• Five key menu navigation• Front panel editing with PINprotection
• Multiple display languages• LED and LCD alarm indication• Customisable status screens• 9 configurable inputs• 5 configurable outputs
• Configurable timers and alarms• Multiple date and time scheduler• Event log (25)• CAN and Magnetic Pick-up/Alt.sensing
• Engine protection alarms• Low fuel alarms• Charge Alternator failure warning• Manual speed control (oncompatible CAN engines)
• Engine exercise scheduler• Automatic load transfer• kW overload protection• Unbalanced load protection• Independent Earth Fault trip• Audible alarm• Backed-up real-time clock• Fully configurable via byDSE7500 PC software
• Configurable display languages• Remote SCADA monitoring viaDSE7500 PC software
• User selectable RS232 andRS485 communications
• SMS Messaging (additionalexternal modem required)
• Built-in governor and AVR control
KEY BENEFITS• 132 x 64 pixel ratio display forclarity
• Real-time clock providesaccurate event logging
• Remote monitoring of moduleusing comprehensive DSE7500PC software
• Sends SMS messages to notifyengineers of specific generatorproblems (GSM modem andSIM card required)
• Ethernet communications (viaDSE860/865 modules), providesadvanced remote monitoring atlow cost
• Modules can be integrated intobuilding management systems(BMS)
• Surplus energy / power can besold back to the grid (subject tolocal mains/utility supplier)
• Licence-free PC software• IP65 rating (with suppliedgasket) offers advancedresistance to water ingress
