Operator Data Sheet – Cebu - Web viewOperator Data Sheet – Cebu - WordPress.com
Dse402mk11 data sheet
Click here to load reader
description
Transcript of Dse402mk11 data sheet
DSE402 MKIIWATERPROOF MANUAL/AUTO STARTCONTROL MODULE
DSEGenset
®
The DSE402 MKII is a waterproofManual/Automatic Start ControlModule designed for genset andother applications. The module isdesigned to start and stop theengine via a manual waterproof keyswitch on the front panel. It willprovide a number of engineprotections, automatically shuttingdown the engine on detection of afault condition. Provision is alsomade for an overspeed shutdownfrom either the MPU or AC Hz (tobe specified on ordering).
First-up shutdown alarm isindicated by a steady red LED.
FEATURES
ENVIRONMENTAL TESTING STANDARDS
ELECTRO MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for theIndustrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for theIndustrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment,including Electrical Business Equipment
TEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30oCBS EN 60068-2-2Bb/Be Dry Heat +70oC
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55oC @ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40oC @ 93% RH 48 Hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15gn in 11mS
DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP66
ISSUE 2
1 1 1 1 1
PC
FREQUENCY / MPU
DSE 813COMMUNICATION
LOP SWITCH HIGH COOLANTTEMP SWITCH
AUXILIARYSHUTDOWN
SET NOMINALSPEED
DC POWER SUPPLY8 V to 35 V
PRE-HEATOUTPUT
ISSUE 1
+
GENERATOR SPEED SENSINGCHARGE ALTERNATOR FUEL AND START OUTPUTS
COMPREHENSIVE FEATURE LIST TO SUIT AWIDE VARIETY OF GEN-SET APPLICATIONS
7
OTHER
DSE402 MKII
+D +W/L
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
055-097/4/11 (2)
KEY FEATURES• Key start • Low oil pressure protection• High engine temperature
protection• Auxiliary shutdown• PC configurable via DSE813
interface and DSE ConfigurationSuite PC Software
• Automatic engine pre-heat• Overspeed protection
KEY BENEFITS• IP66 rating makes this module
ideal for outdoor use• Potted electronics prevents
vibration and water damage• Licence-free PC Software• User friendly set up and fascia
layout• Uses DSE Configuration Suite
PC Software for simpleconfiguration
RELATED MATERIALSTITLE PART NO’SDSE402 MKII Installation Instructions 053-087DSE402 MKII Operator Manual 057-137DSE402 MKII Configuration Suite Lite Software Manual 057-138DSE813 USB Communications Adaptor Data Sheet 055-100
DSE402 MKIIWATERPROOF MANUAL/AUTO STARTCONTROL MODULE
®
DSEGenset
FEATURES
Registered in England & Wales No.01319649VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.
SPECIFICATION
DC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V continuous
CRANKING DROPOUTSAble to survive 0 V for 50 mS, providingsupply was at least 10 V before dropout and supply recovers to 5 V. This is achievedwithout the need for internal batteries.
MAXIMUM OPERATING CURRENT120 mA at 12 V, 170 mA at 24 V
TYPICAL OPERATING CURRENT60 mA at 12 V, 75 mA at 24 V In stop position consumption is zero.
CHARGE/FAIL EXCITATION RANGE0 V to 35 V
OUTPUTSFUEL15 A DC at supply voltage
START15 A DC at supply voltage
PRE-HEAT2 A DC at supply voltage
DIMENSIONSOVERALL157 mm x 111 mm x 60 mm 6.2” x 4.4” x 2.4”
PANEL CUT-OUT132 mm x 84 mm
STORAGE TEMPERATURE RANGE-40°C TO +85°C
OPERATING TEMPERATURE RANGE-30°C TO +70°C