Material Safety Data Sheet Material Safety Data Sheet - Agency for
dse2130-data-sheet
description
Transcript of dse2130-data-sheet
DSE2130DSENET® INPUT EXPANSION MODULE
DSEGenset
®
The DSE2130 is an input expansionmodule for use with DSENet®compatible control modules. The additional input capabilities ofthe DSE2130 give OEMs theflexibility to meet increasinglycomplex industry specifications.
The DSE2130 provides anadditional eight digital inputs, withfour of these configurable for useas analogue inputs. All inputs areconfigured within the hostcontroller.
The module incorporates ‘DIN’ railand chassis mountings allowingconvenient fixing into a panel.
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for the Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for the Industrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment, including Electrical Business Equipment
TEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30 oCBS EN 60068-2-2Bb/Be Dry Heat +70 oC
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn
HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55 oC@ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40 oC@ 93% RH 48 Hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15 gn in 11 mS
HOST MODULE (1)1
ISSUE 4
DSENET®
EXPANSIONDC POWER SUPPLY 8-35 V
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OFGEN-SET APPLICATIONS
7
OTHER
DSE2130
CONFIGURABLEINPUTS
ANALOGUE SENDERS ORCONFIGURABLE DIGITAL INPUTS*
* ALL INPUTS WORK ASDIGITAL ON DSE8660AND DSE8760
DSENET®
2157 2130 2510/20 2548
4 4
COMPATIBLE WITH DSE7310/20, DSE8610/60/80 & DSE8710/60
HOST MODULE
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
055-060/10/10 (4)
KEY FEATURES• Power On/Link Lost LED• 4 Modules can be connected to1 host controller at a time
• Can provide up to 32 additionalinputs
• Works up to 1.2 km (0.75 miles)from the host module
• Terminal strip connection forquick and easy set-up
ID SWITCHThe rotary ID switch is used toselect the address of the DSE2130expansion module, as the hostcontrol module is capable ofworking with up to four DSE2130expansion modules at the sametime.
RELATED MATERIALSTITLE PART NO’SDSE2130 Installation Instructions 053-033DSE2130 Operator Manual 057-082
DSE2130DSENET® INPUT EXPANSION MODULE
®
DSEGenset
Registered in England & Wales No.01319649VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.
SPECIFICATION
DC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V Continuous
CRANKING DROPOUTSAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropoutand supply recovers to 5 V. This isachieved without the need for internalbatteries. LEDs and backlight will not bemaintained during cranking.
MAXIMUM OPERATING CURRENT200 mA at 12 V, 100 mA at 24 V
MAXIMUM STANDBY CURRENT120 mA at 12 V, 60 mA at 24 V
DIMENSIONSOVERALL134 mm x 76 mm x 49 mm 5.3” x 3” x 1.9”