DS25 1” (25NB) - ASM Pumpsasmpumps.com.au/assets/files/DS25-Data-Sheet.pdf · D SERIES DIAPHRAGM...

1
D SERIES DIAPHRAGM PUMPS ASM PUMPS 14 Nicole Way, Dandenong South, Victoria, 3175 Ph: 03 9793 7577 Email: [email protected] www.asmpumps.com.au DS25 1” (25NB) Pump Specificaons Model No. DS25 Port Size: 1” (25NB) BSPP Female Max. Flow: 23 L/min Max. Sucon Liſt: 6m Max. Discharge Head: 6m Max. Solid Size: 15mm Weight: 38 KG Motor Specificaons Brand: Weg W22 Single Phase kW: .25 RPM: 1440 Voltage: 240 FLC: 1.85 amps IP Rang: 55 Lead / Plug: 2m Flex. / 3 Pin Dimenions & specificaons are subject to change without noce. This document cannot be reproduced, in whole or in part without wrien consent from ASM PUMPS Please refer to D Series Installaon & Maintenance manual before installing or servicing the diaphragm pump. Materials of Construcon Diaphragm: Nitrile Opons: EPDM & Viton Valves: Nitrile Opons: EPDM, Viton & Polyurethane Casngs: SG Iron E-Coated Opons: Bronze & Stainless Steels Base Plate: Mild Steel E-Coated OPons: Stainless Steel, Carry & Trolley Frame Recommended Accessories Discharge Pulsaon Dampener Part No. PD1D Sucon Pulsaon Dampener Part No. PD1S Fluid End Service Kit Part No. D25K1

Transcript of DS25 1” (25NB) - ASM Pumpsasmpumps.com.au/assets/files/DS25-Data-Sheet.pdf · D SERIES DIAPHRAGM...

Page 1: DS25 1” (25NB) - ASM Pumpsasmpumps.com.au/assets/files/DS25-Data-Sheet.pdf · D SERIES DIAPHRAGM PUMPS ASM PUMPS 14 Nicole Way, Dandenong South, Victoria, 3175 Ph: 03 9793 7577

D SERIES DIAPHRAGM PUMPS

ASM PUMPS14 Nicole Way, Dandenong South, Victoria, 3175Ph: 03 9793 7577 Email: [email protected]

DS25 1” (25NB)Pump SpecificationsModel No. DS25 Port Size: 1” (25NB) BSPP FemaleMax. Flow: 23 L/minMax. Suction Lift: 6mMax. Discharge Head: 6mMax. Solid Size: 15mm Weight: 38 KG

Motor SpecificationsBrand: Weg W22 Single PhasekW: .25RPM: 1440Voltage: 240FLC: 1.85 ampsIP Rating: 55Lead / Plug: 2m Flex. / 3 Pin

Dimenions & specifications are subject to change without notice. This document cannot be reproduced, in whole or in part without written consent from ASM PUMPS

Please refer to D Series Installation & Maintenance manual beforeinstalling or servicing the diaphragm pump.

Materials of Construction Diaphragm: Nitrile Options: EPDM & VitonValves: Nitrile Options: EPDM, Viton & PolyurethaneCastings: SG Iron E-Coated Options: Bronze & Stainless SteelsBase Plate: Mild Steel E-Coated OPtions: Stainless Steel, Carry & Trolley Frame

Recommended AccessoriesDischarge Pulsation Dampener Part No. PD1D Suction Pulsation Dampener Part No. PD1SFluid End Service Kit Part No. D25K1