DS1 FR 32-port LM - portal.adtran.com · DS1 FR 32-port LM Total Access 5000 DS1 FR 32-port Line...
2
DS1 FR 32-port LM Total Access 5000 DS1 FR 32-port Line Module Product Features ■ Supports 32 DS1s ■ Supports Frame Relay over IP ■ Redundant/Non-Redundant Operation ■ Extended temperature hardened ■ Command Line Interface (CLI) ■ Total Access EMS support ■ Industry-leading Ten-year Warranty As networks continue to converge towards an all-Ethernet infrastructure, customers with legacy business services must be migrated onto these next generation networks for continued service. The Total Access ® 5000 DS1 FR 32-Port Line Module provides channelized Frame Relay (FR) over IP network connectivity to a Total Access 5000 system by way of 32 DS1 interfaces. Customer routers or integrated access devices that are connected through traditional SONET and TDM infrastructure, and that are also using a variety of link layer protocols to carry IP traffic over DS1, can be migrated to an Ethernet infrastructure using the ADTRAN ® Total Access 5000. Equipped with this 32-port DS1 access module family, the Total Access 5000 can support a variety of protocols, such as Point-to Point Protocol (PPP), Multi-link PPP (MLPPP), FR, and ATM/IMA, that can be implemented in a phased approach. The DS1 FR 32-Port module supports Frame Relay over IP protocol and single-T1 PPP services. Additionally, the DS1 FR 32-Port is supported in redundant and non-redundant configurations based upon the input/output module chosen for deployment. Frame Relay operates at the data link layer and provides end-to-end connectivity for devices across a point-to-point link in adherence to RFC 894 by de-encapsulating the customer IP data from Frame Relay and re-encapsulating that customer IP data into an Ethernet VLAN. The DS1 FR 32-Port will forward frames from a T1 channel with FR encapsulation to the Ethernet uplink with a single VLAN tag (S-tag). Supporting an industry standards-based implementation provides operators with an ability to aggregate a wide-variety of frame relay over IP customer premises equipment. The DS1 FR 32-Port Line Module is designed to operate with a nominal operating voltage of –48 VDC and a minimum operating voltage of –40 VDC. The DS1 FR 32-Port Line Module will not be damaged by any steady state voltage between 0 VDC and 56.7 VDC magnitude. Front-panel LEDs include power, alarms, and status for each subscriber loop. The Line Module supports a CLI through the craft interface or remote telnet interface via the Total Access 5000 System Controller Module (SCM). More comprehensive management is available using the Total Access Element Management System (EMS). All provisioning data is supported through the SCM communi- cations link. Smart Solutions for a Connected World.
Transcript of DS1 FR 32-port LM - portal.adtran.com · DS1 FR 32-port LM Total Access 5000 DS1 FR 32-port Line...
DS1 FR 32-port LMTotal Access 5000 DS1 FR 32-port Line Module
Product Features■ Supports 32 DS1s
■ Supports Frame Relay over IP
■ Redundant/Non-Redundant Operation
■ Extended temperature hardened
■ Command Line Interface (CLI)
■ Total Access EMS support
■ Industry-leading Ten-year Warranty
As networks continue to converge towards an all-Ethernet infrastructure, customers with legacy business services must be migrated onto these next generation networks for continued service. The
Total Access® 5000 DS1 FR 32-Port Line
Module provides channelized Frame
Relay (FR) over IP network connectivity to
a Total Access 5000 system by way of
32 DS1 interfaces.
Customer routers or integrated access
devices that are connected through traditional
SONET and TDM infrastructure, and that are
also using a variety of link layer protocols to
carry IP traffic over DS1, can be migrated
to an Ethernet infrastructure using the
ADTRAN® Total Access 5000. Equipped
with this 32-port DS1 access module family,
the Total Access 5000 can support a variety
of protocols, such as Point-to Point Protocol
(PPP), Multi-link PPP (MLPPP), FR, and
ATM/IMA, that can be implemented in a
phased approach.
The DS1 FR 32-Port module supports
Frame Relay over IP protocol and single-T1
PPP services. Additionally, the DS1 FR 32-Port
is supported in redundant and non-redundant
configurations based upon the input/output
module chosen for deployment. Frame Relay
operates at the data link layer and provides
end-to-end connectivity for devices across a
point-to-point link in adherence to RFC 894
by de-encapsulating the customer IP data
from Frame Relay and re-encapsulating that
customer IP data into an Ethernet VLAN.
The DS1 FR 32-Port will forward frames from
a T1 channel with FR encapsulation to the
Ethernet uplink with a single VLAN tag (S-tag).
Supporting an industry standards-based
implementation provides operators with an
ability to aggregate a wide-variety of frame
relay over IP customer premises equipment.
The DS1 FR 32-Port Line Module is
designed to operate with a nominal operating
voltage of –48 VDC and a minimum operating
voltage of –40 VDC. The DS1 FR 32-Port Line
Module will not be damaged by any steady
state voltage between 0 VDC and 56.7 VDC
magnitude.
Front-panel LEDs include power, alarms,
and status for each subscriber loop. The Line
Module supports a CLI through the craft
interface or remote telnet interface via the
Total Access 5000 System Controller Module
(SCM). More comprehensive management
is available using the Total Access Element
Management System (EMS). All provisioning
data is supported through the SCM communi-
cations link.
Smart Solutions for aConnected World.
Product SpecificationsMechanical
■Dimensions: 9.25 in. H x 0.8 in. W x 9.25 in. D
Interfaces■DS1 via Rear Line Module Input/Output
BNC connections
Regulatory Standards■NEBS Level 3■GR-1089 CORE■GR-63 CORE■NRTL Listed■FCC Part 15
Management■Remote management through SNMP and TL1■Ethernet interface for SNMP through System Controller■Local CLI management through System Controller■Supported by Total Access EMS
Environmental■Operating Temperature: -40°C to +65°C■Storage Temperature: -40°C to +85°C■Relative Humidity: Up to 95%, at 50°C, noncondensing
Ordering InformationEquipment Part #
DS1 FR 32-port Line Module 1187803G3Input/Output Modules
LMIO2-CH64 Bridged (Redundant) 1187400G1LMIO2-CH64 DS1 Divided (Non-redundant) 1187402G1
61187803G3-8A May 2011Copyright © 2011 ADTRAN, Inc.
All rights reserved.
Specifications subject to change without notice. ADTRAN and Total Access are registered trademarks of ADTRAN, Inc. All registered trademarks and trademarks mentioned in this publication are the property of their respective owners.
ADTRAN is an ISO 9001, ISO 14001, and a TL 9000 certified supplier.
ADTRAN, Inc.901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000Huntsville, AL 35814-4000
256 963 8000256 963 8030 fax
General Information800 9ADTRAN
Pre-Sales Technical Support
888 5ADTRAN [email protected]
www.adtran.com/support
Where to Buy800 827 0807
www.adtran.com/where2buy
Post-Sales Technical Support
800 726 [email protected]
www.adtran.com/support
Regional OfficesDallas, TX
972 830 9070Denver, CO
303 471 9150Kansas City, KS
800 471 8649Newark, NJ800 471 8656
Ontario, Canada416 290 0585
Quebec, Canada877 923 8726
San Antonio, TX888 223 7671
International Inquiries+1 256 963 8716
+1 256 963 6300 [email protected]
www.adtran.com/global
TL19.1270
DS1 FR 32-port LMTotal Access 5000 DS1 FR 32-port Line Module
GigE
10/100Base-T
Up to 32 DS1s per32-port T1s
Server
PCsT1s
T1s
NetVanta 1234 PoE
1 3 5 7 9 1113 15 17 19 21 23
G3G1
LINK/ACT
STAT PoE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2 4 6 8 10 1214 16 18 20 22 24
22
23
24
G1
G2
G3
G4
CONSOLE
G4G2
Power over Ethernet
NetVanta 3430
Total Access 5000
NetVanta 3430
Compact Flash®
STATUS
WAN
DBU
ETH 1
ETH 2
Transport
Ethernet
Transport could be SONET,repeatered T1, HDSLx, etc.
Router
MX2820
IP Phones
ILL156B
