DS SERIES - US Pole Company, Inc. · The DS Series by U.S. Architectural/Sun Valley Lighting is the...
-
Upload
hoangxuyen -
Category
Documents
-
view
216 -
download
0
Transcript of DS SERIES - US Pole Company, Inc. · The DS Series by U.S. Architectural/Sun Valley Lighting is the...
Standard Housing- B
Unlit Bands
- L Uplight Windows
- M Uplight Windows w/Bands
Standard Lens
- P Horizontal Lamp Reflector
- P Vertical Lamp Reflector
- R Refractor
- A Angled Shade
- C Convex Shade
- D Domed Shade
T Tiered Shade
- H Half Domed Shade
-- S Skirted Shade
Overview
Aesthetic Elements Performance (Optical) Selections
The DS Series by U.S. Architectural/Sun Valley Lighting is the epitome of the “Knob and Shade” style luminaire. The bold aesthetic elements, from the variety of shade styles to the decorative luminous treatments, allow the DS Series to be configured to match any architectural context. Additionally, a wide selection of optical approaches provide the lighting professional with the tools to address environments that demand performance driven light levels or that require soft, decorative illumination.
From HID to LED, no other product of its kind presents such a vast collection of aesthetic and performance features as does the DS Series from U.S. Architectural/Sun Valley Lighting.
Clear linear prismatic glass lens. Optional opal glass.
Clear polycarbonate refractor, IES distribution Types II, III, IV, and V. Optional clear acrylic.
Segmented optics in IES distribution Types II, III, IV,and V-SQ; also Forward Throw and perimeter specific optics. Available in models with -P; -L; -M suffix.
Segmented optics in asymmetric and symmetricdistributions. Available in models with –P suffix only.
1 U.S.ARCHITECTURAL/SUN VALLEY LTG. www.usaltg.com
Table of Contents
Pages 9-12 HID - 175W Max LED - 60W Max
HID - 175W Max LED - 60W Max
HID - 250W Max LED - 60W Max
HID - 250W Max LED - 60W Max
HID - 175W Max LED - 60W Max
HID - 250W Max LED - 60W Max
HID - 400W MaxLED - 132W Max
HID - 400W Max
HID - 400W Max
HID - 400W MaxLED - 132W Max
HID - 250W Max
HID - 250W Max
HID - 250W MaxLED - 132W Max
DSADSD
Pages 25-28
DSHDSHR
DSARBDSCRB
Pages 13-16
DSCDST
Pages 29-32
Pages 33-36
DSAPDSDP
Pages 37-40
DSCPDSTP
Pages 41-44
DSAPLDSDPL
Pages 45-48
DSCPLDSTPL
Pages 17-20
DSARDSDR
Pages 21-24
DSCRDSTR
Pages 49-52
DSAPMDSDPM
Pages 53-56
DSCPMDSTPM
Pages 57-60
DSS
The combination of relevant Aesthetics and Performance driven optics.
2U.S.ARCHITECTURAL/SUN VALLEY LTG. www.usaltg.com
Residential
SNTS 104-11/DSAPL1/Custom Arm/PT27/RAL-9005
700-1035T-28’/DSCRB25/XPG-1/PT27RAL-9005 4300-1058C-7’/DSA1/XBM-1/PT27/Custom Color
AESTHETIC
3 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
Streetscapes
100-1030C Mod-7’/DSAP1/WA/XPM-2-180/PT27/Custom Color
SPCL-16’/DSH1-WGD/XZY-SPCL-1/RAL-6005/FBA
3900SB-1046T-40’/DSA1/Custom Arm-1/PT27/RAL-6005-T
4www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
Infrastructure
RTA 1443-125/DSS1/XPD-2-180/PT27/RAL-9005
RNTA 84-125/DSCRB1/XBC-3-120/PT27/RAL-6005/RBC
RTA 1443-125/DSAPL1/WA/XPD-2-180/PT27RAL-9005
AESTHETIC
5 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
Commercial
4200-1040-17’/DSAP1/XPK-1/PT27/RAL-8019/RBA-2 4300-1050-13’/DSDR/XBZ Mod-2/PT27/RAL-8019
4200-1040-17’/DSAP1/XPK-1/PT27/RAL-8019/RBA-24300-1050-13’/DSDR/XBZ Mod-1/PT27/RAL-8019
6www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
HID Segmented Reflectors
Horizontal lamp reflectors produce very sharp cutoff with good uniformity.
Vertical lamp reflectors produce excellent uniformity with slightly greater high angle output.
Reflectors are formed as one piece from highly specular reflector sheet material.
Reflectors are formed as one piece from highly specular reflector sheet material.
Convex lens supplied with all vertical lamp models. DSS1 may also use a flat glass lens for cut-off.
Med. Base175W150W100W70W50W39W
Mogul Base250W
Mogul Base400W350W320W250W
Med. Base200W175W150W100W70W50W
G Base150W70W39W
G Base150W70W
PGZ18 Base315W210W
Type III
Type V Sq.
Type IVType II Type III
Type V Sq.
Type IV
Horizontal Lamp Vertical Lamp
FT-HSC
DSAP/DSCP/DSDP/DSTP/DSAPL/DSCPL/DSTPL/DSAPM/DSCPM/DSDPM/DSTPM DSS
Med. Base175W150W100W70W50W39W
Mogul Base250W
Mogul Base400W350W320W250W
Med. Base200W175W150W100W70W50W
G Base150W70W39W
G Base150W70W
PGZ18 Base315W210W
DSAP/DSCP/DSDP/DSTP/ DSS
Available in Models: Available in Models:
PERFORMANCE
7 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
Optical Systems®
®See Catalog for a complete presentation on the System.
®U.S. Architectural’s system is both unique and innovative within the lighting industry. It is a self contained module, totally sealed from the elements, complete with LEDs and optics enclosed in a precise cast housing, heat sinked and entirely sealed by a tempered glass lens to meet IP67 rating .
This totally enclosed system enhances the LED’s long life and reduced energy.
®
No. of LEDs120
8064
SystemWatts132
8871
HIDEquivalent250PSMH150PSMH100PSMH
Type II
Type IV
Type III
Type V Sq.
Type II
Type IV
Type III
Type V Sq.
®Max CP Curve for 120 Module
Clear Tempered Glass Linear
Prismatic Diffuser Polycarbonate Rerfractor
Type V Rd.
LED Power Tower TM Module Module®
Optical Tower - Tower consists of an array of 6 LED Capsules aimed 60° apart and mounted to a barrier plate separating the optical compartment from the driver compartment. The array is covered by a clear tempered glass linear prismatic diffuser (IES Type V-Round) or clear polycarbonate refractor (IES Types II, III, IV, V-Round).
LED Capsules - Each capsule consists of 6 LED’s mounted to a vented circuit board heat-sinked on the back. Each LED has a specular, formed reflector that directs output downward through a diffuse acrylic lens that encloses each capsule.
System Wattage - 60W
Models: DSA/DSC/DSD/DST/DSH use clear tempered glass linear prismatic diffuser.
Models: DSAR/DSCR/DSDR/DSTR/DSHR/DSARB/DSCRB use clear polycarbonate refractor.
DSAP/DSCP/DSDP/DSTP/DSSAvailable in Models:
0% of Total Light Outputoccurs at or abovehorizontal.
Less than 3% of Total Light Output occurs above 75°.
Driver
Driver Bracket(Driver Bracketseparates thedriver and opticalcompartments)
Optical Tower
8www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
17"(432mm)
20"(508mm)
14"(356mm)
15.5"(794mm)
14"(356mm)
13"(330mm)
DSA
DSA1175W Max.EPA: 0.83Max. Wt: 19lbs
DSA2100W Max.EPA: 0.65 Max. Wt: 13lbs
Glass Diffuser
Straight Sided Shade
SCALE: 3/8" = 1'-0"
17"(432mm)
20.5"(521mm)
14"(356mm)
15.5"(394mm)
14"(356mm)
13"(330mm)
DSD
DSD1175W Max.EPA: 0.97Max. Wt: 27lbs
DSD2100W Max.EPA: 0.59 Max. Wt: 12lbs
Glass Diffuser(inside)
Curved Sided Shade
9 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
DSA1
WALL MOUNT
ARM MOUNTSTANDARD
Spec/Order Example: DSA1/100PSMH277E/CPG/1/RAL9005-T
MODEL LAMP/BALLAST MODE OPTICS MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
DSA2
WATTS TYPE VOLTS
175150T 3 HPS15010070T 3
7048LED 2
PSMH 120208240277347 (CAN)
480
E 2 (ELECTRONIC)
1 – 50W ONLY2 – 120 THRU 277 ONLY3 – G12 BASE
120208240277347 (CAN)
480
10070T 3 HPS705039T 3
PSMH
CPGCLEAR LINEARPRISMATICTEMPERED GLASS
WDGOPAL GLASS DIFFUSER(ANNEALED AND HEAT RESISTANT)
STANDARDTEXTURED FINISH
FixtureSpec/Order from this page.
Arms, Poles and BasesSee pages 11 & 12 for suggested Arm, Pole and Base combinations.
STANDARD MAGNETIC BALLAST
E 1, 2 (ELECTRONIC)
STANDARD MAGNETIC BALLAST
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD 90° . . . . . . HS 90° 135° . . . . . . HS 135° 180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . DF
3/8" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM38
OPTIONAL
DSD1
DSD2
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket also functions as mounting reinforcement plate with a minimum thickness of .125". Optical housing is spun from .080" aluminum, hemmed at the edges and internally finished in high-gloss white paint for maximum reflectance.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and paint adhesion. 400°F bake for maximum hardness and durability.
DSA/DSD Fixture Specifications and Ordering
Ballast
Housing
Socket
Diffuser
Lamp by Others
10U.S.ARCHITECTURAL/SUN VALLEY LTG. www.usaltg.com
Fixture
Arm
Pole
Base
DSA2
XWB
10404" Dia. Alum.
8500
DSA1
XPS-2
RTA 2064-1886" to 4" Dia. Tapered Alum.
-
DSA1
XPJ
10705" Dia. Fluted Alum.
1400
DSA2
XPK-WM
-
-
Suggested DSA Combinations For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
LIG
HTIN
GU
.S. A
RC
HIT
ECTU
RA
L
RBAROTATABLE BANNER ARM
11 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSD1
XPG
1046T6" to 4" Dia. Tapered Alum.
3100
DSD1
XPC-2
10404" Dia. Alum.
5200
DSD1
XBC
TFS 1953-115" to 3" Dia. Fluted, Tapered Steel
4300B
DSD2
XPK-WM
-
-
Suggested DSD Combinations
Fixture
Arm
Pole
Base
For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
B31EL-CAPBOLLARD
FSS2FIXED STREET SIGN
12www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
SCALE: 3/8" = 1'-0"
16.5"(419mm)
22"(559mm)
14"(356mm)
15.5"(394mm)
14.5"(368mm)
13"(330mm)
DST
DST1175W Max.EPA: 0.78Max. Wt: 17lbs
DST2100W Max.EPA: 0.48 Max. Wt: 7lbs
Straight Sided Shade
Glass Diffuser
16.5"(419mm)
22"(559mm)
14"(356mm)
15.5"(394mm)
14.5"(368mm)
13"(330mm)
DSC
DSC1175W Max.EPA: 0.78Max. Wt: 18lbs
DSC2100W Max.EPA: 0.50 Max. Wt: 12lbs
Curved Sided Shade
Glass Diffuser
13 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
STANDARD
LAMP/BALLAST MODE OPTICS
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
WATTS TYPE VOLTS
175150T 3 HPS15010070T 3
7048LED 2
PSMH 120208240277347 (CAN)
480
E 1, 2 (ELECTRONIC)
E 2 (ELECTRONIC)
1 – 50W ONLY2 – 120 THRU 277 ONLY3 – G12 BASE
120208240277347 (CAN)
480
10070T 3 HPS705039T 3
PSMH
CPGCLEAR LINEARPRISMATICTEMPERED GLASS
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
STANDARDTEXTURED FINISH
DST1
DST2
Spec/Order Example: DSC2/100PSMH120/WGD/1/RAL9003
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD 90° . . . . . . HS 90° 135° . . . . . . HS 135° 180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . DF
3/8" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM38
FixtureSpec/Order from this page.
Arms, Poles and BasesSee pages 15 & 16 for suggested Arm, Pole and Base combinations.
WDGOPAL GLASS DIFFUSER(ANNEALED AND HEAT RESISTANT)
OPTIONAL
DSC1
DSC2
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket also functions as mounting reinforcement plate with a minimum thickness of .125". Optical housing is spun from .080" aluminum, hemmed at the edges and internally finished in high-gloss white paint for maximum reflectance.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and paint adhesion. 400°F bake for maximum hardness and durability.
DSC/DST Fixture Specifications and Ordering
Ballast
Housing
Socket
Diffuser
Lamp by Others
14www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
Fixture
Arm
Pole
Base
DSC2
XWA
10404" Dia. Alum.
400
DSC1
XPD-2
10604" Dia. Fluted Alum.
4200
DSC1
XPE
1030C5.25" to 3.5" Cast, Fluted, Tapered Alum.
3300
DSC2
XBC-WM
-
-
Suggested DSC Combinations
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
B32EL-CAPBOLLARD
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
15 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DST1
XPJ
RNTA 205-1885" Dia. Alum.
4400SB
DST1
XPK-2
1060STL4" Dia. Fluted Steel
3200SB
DST1
XBB
RTA 1964-1886" to 4" Dia. Tapered Alum.
4000SB
DST2
XPS-WM
-
-
Suggested DST Combinations For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
16www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
17.5"(445mm)
21.5"(546mm)
14"(356mm)
DSDR
DSDR1150W Max.EPA: 1.04 Max. Wt: 23lbs
Prismatic Refractor
Curved Sided Shade
22"(559mm)
25"(635mm)
18"(457mm)
19"(483mm)
20"(508mm)
14"(356mm)
SCALE: 3/8" = 1'-0"
DSAR
DSAR25250W Max.EPA: 1.38Max. Wt: 31lbs
DSAR1150W Max.EPA: 0.99 Max. Wt: 21lbs
Prismatic Refractor
Straight Sided Shade
17 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
WATTS TYPE VOLTS
250175 HPS150T 3
15010070T 3
70
PSMH 120208240277347 (CAN)
480
48LED 2
E 2 (ELECTRONIC)
2 – 120 THRU 277 ONLY3 – G12 BASE
120208240277347 (CAN)
480
150T 3
150 HPS10070T 3
E 2 (ELECTRONIC)
705048LED 2
PSMH
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
CPCLEAR POLYCARBONATEREFRACTOR
CACLEAR ACRYLIC REFRACTOR
STANDARDTEXTURED FINISH
DSAR25
DSAR1
STANDARD
OPTIONAL
DISTRIBUTION
TYPE I I R-II . . . . . . . . .
TYPE I I I R-III. . . . . . . . .
TYPE I V(FORWARD THROW) R-I V . . . . . . . . .
TYPE VR-V - R N D . . . .
Spec/Order Example: DSAR25/175PSMH240/R-III/1/RAL9005
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD 90° . . . . . . HS 90° 135° . . . . . . HS 135° 180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . DF
3/8" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM38
FixtureSpec/Order from this page.
Arms, Poles and BasesSee pages 19 & 20for suggested Arm, Pole and Base combinations.
DSDR1
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket also functions as mounting reinforcement plate with a minimum thickness of .125". Optical housing is spun from .080" aluminum, hemmed at the edges and internally finished in high-gloss white paint for maximum reflectance.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and paint adhesion. 400°F bake for maximum hardness and durability.
DSAR/DSDR Fixture Specifications and Ordering
Ballast
Housing
Socket
Refractor
Lamp by Others
18www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSAR25
XBB
10705" Dia. Fluted Alum.
3300
DSAR1
XPJ-2
10604" Dia. Fluted Alum.
400M
DSAR25
XPS
RNTS 205-75" Dia. Steel
-
DSAR1-WM
XWB
-
-
Suggested DSAR Combinations
B33CL-CAPBOLLARD
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
19 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSDR1
XWB
RTA 1964-1886" to 4" Dia. Tapered Alum.
4400SB
DSDR1
XPR-2
10605" Dia. Fluted Alum.
2100
DSDR1
XPH
1030C4.5" to 3.5" Dia. Cast, Fluted, Tapered Alum.
4300
DSDR1-WM
XBC
-
-
Suggested DSDR Combinations
B21C-CAPBOLLARD
For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
20www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
20"(508mm)
25"(635mm)
18"(457mm)
16.5"(419mm)
20"(508mm)
14"(356mm)
SCALE: 3/8" = 1'-0"
DSTR
DSTR25250W Max.EPA: 1.32Max. Wt: 37lbs
DSTR1150W Max.EPA: 0.86 Max. Wt: 20lbs
Straight Sided ShadePrismatic Refractor
21"(533mm)
28"(711mm)
18"(457mm)
18.5"(470mm)
22"(559mm)
14"(356mm)
DSCR
DSCR25250W Max.EPA: 1.30Max. Wt: 35lbs
DSCR1150W Max.EPA: 0.97 Max. Wt: 20lbs
Curved Sided Shade
Prismatic Refractor
21 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
WATTS TYPE VOLTS
HPSPSMH 120
208240277347 (CAN)
480
120208240277347 (CAN)
480
HPSPSMH
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD 90° . . . . . . HS 90° 135° . . . . . . HS 135° 180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . DF
3/8" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM38
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
CPCLEAR POLYCARBONATEREFRACTOR
STANDARDTEXTURED FINISH
STANDARD
OPTIONAL
DSTR25
DSTR1
Spec/Order Example: DSCR1/175HPS120/WGD/1/RAL-8019
FixtureSpec/Order from this page.
CACLEAR ACRYLIC REFRACTOR
DISTRIBUTION
TYPE I I R-II . . . . . . . . .
TYPE I I I R-III. . . . . . . . .
TYPE I V(FORWARD THROW) R-I V . . . . . . . . .
TYPE VR-V - R N D . . . .
Arms, Poles and BasesSee pages 23 & 24 for suggested Arm, Pole and Base combinations.
250175150T 3
15010070T 3
7048LED 2
E 2 (ELECTRONIC)
150T 3
15010070T 3
E 2 (ELECTRONIC)
705048LED 2
DSCR25
DSCR1
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket also functions as mounting reinforcement plate with a minimum thickness of .125". Optical housing is spun from .080" aluminum, hemmed at the edges and internally finished in high-gloss white paint for maximum reflectance.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and paint adhesion. 400°F bake for maximum hardness and durability.
DSCR/DSTR Fixture Specifications and Ordering
Ballast
Housing
Socket
Refractor
Lamp by Others
22www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSCR1
XPJ
RNTA 206-2506" Dia. Alum.
-
DSCR25
XWA-2
1046T4" Dia. Fluted Alum.
1300
DSCR25
XPE
1030C5.25" to 3.5" Dia. Cast, Fluted, Tapered Alum.
3100
DSCR1-WM
XBB
-
-
Suggested DSCR Combinations For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
RFHROTATABLE
FLAG HOLDER
Fixture
Arm
Pole
Base
23 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSTR1
XWB
1080C7" to 4" Dia. Cast, Octagonal, Tapered Alum.
4500
DSTR25
XWB-2
RNTS 205-115" Dia. Steel
-
DSTR25
XPK
10404" Dia. Alum.
2100
DSTR1-WM
XPS
-
-
Suggested DSTR Combinations For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
FBAFIXED BANNER ARM(with Decorative Tails)
Fixture
Arm
Pole
Base
24www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
16.5"(419mm)
24"(610mm)
20"(508mm)
30"(762mm)
17"(432mm)
24"(610mm)
DSH DSHR
DSH1150W Max.EPA: 0.77Max. Wt: 22lbs
DSHR25250W Max.EPA: 125Max. Wt: 37lbs
DSHR1150W Max.EPA: 0.93 Max. Wt: 20lbs
Glass Diffuser
Curved Sided Shade Curved Sided Shade
Prismatic Refractor
24"(610mm)
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
41"(1041mm)
SCALE: 3/8" = 1'-0"
25 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
MODEL LAMP/BALLAST MODE OPTICS MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
CPGCLEAR LINEARPRISMATICTEMPERED GLASS
STANDARDTEXTURED FINISH
STANDARD
FixtureOrder from this page.
DSHR25
DSHR1
DSH1
WATTS TYPE VOLTS
150T 3
HPS15010070T 3
7048LED 2
PSMH 120208240277347 (CAN)
480
E 2 (ELECTRONIC)
1 – 50W ONLY2 – 120 THRU 277 ONLY3 – G12 BASE
STANDARD MAGNETIC BALLAST
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
250175 HPS
PSMH 120208240277347 (CAN)480
150T 3
15010070T 3
7048LED 2
E 2 (ELECTRONIC)
120208240277347 (CAN)480
HPSPSMH
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
CPCLEAR POLYCARBONATEREFRACTOR
STANDARD
OPTIONAL
Spec/Order Example: DSHR25/150T3PSMH347E/CP/1/RAL-6005
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD 90° . . . . . . HS 90° 135° . . . . . . HS 135° 180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . DF
3/8" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM38
CACLEAR ACRYLIC REFRACTOR
DISTRIBUTION
TYPE I I R-II . . . . . . . . .
TYPE I I I R-III. . . . . . . . . TYPE I V(FORWARD THROW) R-I V . . . . . . . . .
TYPE VR-V - R N D . . . .
Arms, Poles and BasesSee pages 27 & 28 for suggested Arm, Pole and Base combinations.
WDGOPAL GLASS DIFFUSER(ANNEALED AND HEAT RESISTANT)
OPTIONAL
150T 3
15010070T 3
705048LED 2
E 2 (ELECTRONIC)
Housing – Ballast housing is spun from .080” aluminum. Ballast support bracket also functions as mounting reinforcement plate with a minimum thickness of .125". Optical housing is spun from .080" aluminum, hemmed at the edges and internally finished in high-gloss white paint for maximum reflectance.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and paint adhesion. 400°F bake for maximum hardness and durability.
DSH/DSHR Fixture Specifications and Ordering
Ballast
Housing
Socket
Diffuser
Lampby Others
26www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
Suggested DSH Combinations
DSH1-WM
XWA
-
-
DSH1
XBC-2
TFS 20646" to 4" Dia. Fluted, Tapered Steel
4200SB
DSH1
XPG
10404" Dia. Alum.
300
DSH1
XPJ
1046T6" to 4" Dia. Tapered Alum.
1400
B3C-CAPBOLLARD
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
27 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSHR1
XWA-2
RNTS 255-115" Dia. Steel
-
Suggested DSHR Combinations
DSHR1
XPE
-
-
DSHR25
XPK
RNTA 154-1884" Dia. Alum.
2400SB
DSHR25
XPE
1058C7" to 4" Dia. Cast, Fluted, Tapered Alum.
4400
B24C-CAPBOLLARD2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
BBABREAK AWAY BANNER ARM
Fixture
Arm
Pole
Base
For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
28www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
22"(559mm)
25"(635mm)
24"(610mm)
19"(483mm)
20"(508mm)
24"(610mm)
21"(533mm)
28"(711mm)
24"(610mm)
18.5"(470mm)
22"(559mm) 24"
(610mm)
41"(1041mm)
41"(1041mm)
41"(1041mm)
41"(1041mm)
SCALE: 3/8" = 1'-0"
DSARB DSCRB
DSARB25250W Max.EPA: 1.39Max. Wt: 35lbs
DSARB1150W Max.EPA: 1.00 Max. Wt: 23lbs
DSCRB25250W Max.EPA: 1.28Max. Wt: 39lbs
DSCRB1150W Max.EPA: 0.95 Max. Wt: 24lbs
Prismatic Refractors
Straight Sided Shade Curved Sided Shade
Prismatic Refractor
29 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
WATTS TYPE VOLTS
HPSPSMH 120
208240277347 (CAN)
480
2 – 120 THRU 277 ONLY3 – G12 BASE
120208240277347 (CAN)
480
HPSPSMH
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD 90° . . . . . . HS 90° 135° . . . . . . HS 135° 180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . DF
3/8" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM38
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
CPCLEAR POLYCARBONATEREFRACTOR
STANDARDTEXTURED FINISH
DSARB25
DSARB1
DSCRB25
DSCRB1
STANDARD
OPTIONAL
Spec/Order Example: DSCRB25/150TPSMH240E/R-III/1/RAL7004-T
FixtureSpec/Order from this page.
CACLEAR ACRYLIC REFRACTOR
DISTRIBUTION
TYPE I I R-II . . . . . . . . .
TYPE I I I R-III. . . . . . . . .
TYPE I V(FORWARD THROW) R-I V . . . . . . . . .
TYPE VR-V - R N D . . . .
Arms, Poles and BasesSee pages 31 & 32 for suggested Arm, Pole and Base combinations.
150T 3
15010070T 3
705048LED 2
E 2 (ELECTRONIC)
250175150T 3
15010070T 3
7048LED 2
E 2 (ELECTRONIC)
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket also functions as mounting reinforcement plate with a minimum thickness of .125". Optical housing is spun from .080" aluminum, hemmed at the edges and internally finished in high-gloss white paint for maximum reflectance. Horizontal louvers (decorative bands – non-illuminated) are made of heavy gauge aluminum sheet and welded to the ballast housing.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm bythe Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and paint adhesion. 400°F bake for maximum hardness and durability.
DSARB/DSCRB Fixture Specifications and Ordering
Ballast
Housing
Socket
Refractor
Lamp by Others
30www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSARB25
XPG
10705" Dia. Fluted Alum.
8500
DSARB1
XPR-2
10705" Dia. Fluted Alum.
1200
DSARB25
XPE
TSF 22747" to 4" Dia. Tapered, Fluted Steel
3600SB
DSARB1-WM
XBC
-
-
Suggested DSARB Combinations For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
RSS1ROTATABLE
STREET SIGN
Fixture
Arm
Pole
Base
31 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSCRB1
XPC
10604" Dia. Fluted Alum.
3200
DSCRB25
XPE-2
RTS 20-116" to 3" Dia. Tapered Alum.
-
DSCRB1
XPR
TFS 19646" to 4" Dia. Fluted, Tapered Alum.
3600SB
DSCRB1-WM
XWA
-
-
Suggested DSCRB Combinations
B35EL-CAPBOLLARD
For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
32www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
21"(533mm)
25"(635mm)
18"(457mm)
17.5"(445mm)
21.5"(546mm)
14"(356mm)
DSDP
DSDP25400W Max.EPA: 1.52Max. Wt: 48lbs
DSDP1150W Max.EPA: 1.10 Max. Wt: 28lbs
Curved Sided Shade
18.5"(470mm)
25"(635mm)
18"(457mm)
14"(356mm)
20"(508mm)
14"(356mm)
SCALE: 3/8" = 1'-0"
DSAP
DSAP25400W Max.EPA: 1.23Max. Wt: 42lbs
DSAP1150W Max.EPA: 0.77 Max. Wt: 26lbs
Straight Sided Shade
33 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
WATTS TYPE VOLTS
HPSPSMH 120
208240277347 (CAN)
480175 4
150T 3
150100
400350 320315 5
250
64 LED 2
80 LED 2
120 LED 2
E 2 (ELECTRONIC)
E 2 (ELECTRONIC)
2 – 120 THRU 277 ONLY3 – G12 BASE4 – POSITION SENSITIVE LAMP
120208240277347 (CAN)
480
HPSPSMH150T 3
15010070T 3
705064 LED 2
80 LED 2
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
STANDARDTEXTURED FINISH
DSAP25
DSAP1
Spec/Order Example: DSDP25/250PSMH277/HR-III/1/RAL6005-T/PC277
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . . DF
3/4" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . WP
FixtureSpec/Order from this page.
HORIZONTAL SEGMENTEDREFLECTORS
VERTICAL SEGMENTEDREFLECTORS
TYPE I I HR-II . . . . . . . .
TYPE I I I HR-III. . . . . . . .
TYPE I VHR-I V . . . . . . . .
FORWARD THROW(HOUSE SIDE CUT-OFF)HR-FT-HSC. . .
TYPE V SQUAREHR-V-SQ. . . . .
ASYMMETRICVR-ASY. . .
SYMMETRICVR-V-SQ. . . .
Arms, Poles and BasesSee pages 35 & 36 for suggested Arm, Pole and Base combinations.
DSDP25
DSDP1
Housing – (For up to 175W) – Ballast housing is spun from .080" aluminum. Internal ballast support bracket also functions as mounting reinforcement plate and has a minimum thickness of .125". (For 250W & above) – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy, minimum .125" wall thickness. Optical housing is spun from .080" aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless steel thumbscrew allows for tool less entry to the optical compartment which is sealed with a closed cell E.P.D.M. gasket.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior to power wash and paint. A four step iron phosphate pretreatment for protection and paint adhesion is utilized. 400°F bake for maximum hardness and durability.
DSAP/DSDP Fixture Specifications and Ordering
Ballast
Housing
Socket
GlassLens
Lampby Others
34www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSAP1
XPJ
10705" Dia. Fluted Alum.
2600
DSAP25
XWB
RNTS 205-75" Dia. Steel
-
DSAP1-WM
XPK
-
-
Suggested DSAP Combinations
DSAP1/WP
XWB
1030T4" to 3" Dia. Tapered Alum.
1200
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
35 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSDP1
XPR
10505" Dia. Alum.
700
DSDP25
XPD-2
RTA 2064-1886" to 4" Dia. Tapered Alum.
-
DSDP1
XPJ
10604" Dia. Fluted Alum.
300
DSDP1-WM
XBB
-
-
Suggested DSDP Combinations
B3C-BALBOLLARD
For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
RBCROUNDBASE COVER
ROTATABLE LADDER REST
Fixture
Arm
Pole
Base
36www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
17"(432mm)
28"(711mm)
18"(457mm)
13"(330mm)
22"(559mm)
14"(356mm)
DSCP
DSCP25250W Max.EPA: 1.10Max. Wt: 48lbs
DSCP1150W Max.EPA: 0.63 Max. Wt: 29lbs
Curved Sided Shade
17"(432mm)
25"(635mm)
18"(457mm)
13"(330mm)
20"(508mm)
14"(356mm)
SCALE: 3/8" = 1'-0"
DSTP
DSTP25250W Max.EPA: 1.17Max. Wt: 28lbs
DSTP1150W Max.EPA: 0.70 Max. Wt: 23lbs
Straight Sided Shade
37 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
WATTS TYPE VOLTS
250 4
175 4 HPS150T 3
15010064LED 2
80LED 2
120LED 2
PSMH 120208240277347 (CAN)
480
E 2 (ELECTRONIC)
E 2 (ELECTRONIC)
2 – 120 THRU 277 ONLY3 – G12 BASE4 – POSITION SENSITIVE LAMP
120208240277347 (CAN)
480
HPSPSMH150T 3
15010070T 3
705064LED 2
80LED 2
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
STANDARDTEXTURED FINISH
DSTP25
DSTP1
Spec/Order Example: DSTP1/150TPSMH277E/HR-III/1/RAL6005
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . . DF
3/4" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . WP
FixtureSpec/Order from this page.
HORIZONTAL SEGMENTEDREFLECTORS
VERTICAL SEGMENTEDREFLECTORS
TYPE I I HR-II . . . . . . . .
TYPE I I I HR-III. . . . . . . .
TYPE I VHR-I V . . . . . . . .
FORWARD THROW(HOUSE SIDE CUT-OFF)HR-FT-HSC. . .
TYPE V SQUAREHR-V-SQ. . . . .
ASYMMETRICVR-ASY. . .
SYMMETRICVR-V-SQ. . . .
Arms, Poles and BasesSee pages 39 & 40 for suggested Arm, Pole and Base combinations.
DSCP25
DSCP1
Housing – (For up to 175W) – Ballast housing is spun from .080" aluminum. Internal ballast support bracket also functions as mounting reinforcement plate and has a minimum thickness of .125". (For 250W & above) – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy, minimum .125" wall thickness. Optical housing is spun from .080" aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless steel thumbscrew allows for tool less entry to the optical compartment which is sealed with a closed cell E.P.D.M. gasket.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior to power wash and paint. A four step iron phosphate pretreatment for protection and paint adhesion is utilized. 400°F bake for maximum hardness and durability.
DSCP/DSTP Fixture Specifications and Ordering
Ballast
Housing
Socket
GlassLens
Lampby Others
38www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSCP25
XPE
10705" Dia. Fluted Alum.
8500
DSCP1
XBC-2
RNTA 205-1885" Dia. Alum.
-
DSCP1-WM
XPC
-
-
Suggested DSCP Combinations
DSCP1/WP
XPH
1058C5.5" to 4" Dia. Cast, Fluted, Tapered Alum.
4000
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
RSS3ROTATABLESTREET SIGN
Fixture
Arm
Pole
Base
39 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSTP25
-
-
-
DSTP1
XPK-2
10705" Dia. Fluted Alum.
4500SB
DSTP25
XPS
1035T5" to 3" Dia. Tapered Alum.
1400
DSTP1-WM
XWB
-
-
Suggested DSTP Combinations
B11C-CAPBOLLARD
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
CMCHAIN MOUNT
Fixture
Arm
Pole
Base
For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
40www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
26.5"(674mm)
25"(635mm)
20"(508mm)
21.5"(546mm)
DSDPL
DSDPL25400W Max.EPA: 1.80Max. Wt: 50lbs
DSDPL1150W Max.EPA: 1.19 Max. Wt: 30lbs
Prismatic or Opal Glass
Curved Sided Shade
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
24"(610mm)
25"(635mm)
16.5"(419mm)
20"(508mm)
DSAPL
DSAPL25400W Max.EPA: 1.51Max. Wt: 48lbs
DSAPL1150W Max.EPA: 0.86 Max. Wt: 27lbs
Prismatic or Opal Glass
Straight Sided Shade
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
SCALE: 3/8" = 1'-0"
41 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
WATTS TYPE VOLTS
HPSPSMH 120
208240277347 (CAN)
480175 4
150T 3
150100
400350 320315 5
250
E 2 (ELECTRONIC)
E 2 (ELECTRONIC)
2 – 120 THRU 277 ONLY3 – G12 BASE4 – POSITION SENSITIVE LAMP
120208240277347 (CAN)
480
HPSPSMH150T 3
15010070T 3
7050
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
STANDARDTEXTURED FINISH
DSAPL25
DSAPL1
Spec/Order Example: DSAPL25/250PSMH277/HR-V-SQ/1/RAL9003-T
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . . DF
3/4" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . WP
HORIZONTAL SEGMENTEDREFLECTORS
TYPE I I HR-II . . . . . . . .
TYPE I I I HR-III. . . . . . . .
TYPE I VHR-I V . . . . . . . .
FORWARD THROW(HOUSE SIDE CUT-OFF)HR-FT-HSC. . .
TYPE V SQUAREHR-V-SQ. . . . .
Arms, Poles and BasesSee pages 43 & 44 for suggested Arm, Pole and Base combinations.
FixtureSpec/Order from this page.
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
DSDPL25
DSDPL1
Housing – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy, minimum .125" wall thickness. Windows in the lower portion of the ballast housing allow for decorative illumination (horizontal optics only) .Optical housing is spun from .080" aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless steel thumbscrew allows for tool less entry to the optical compartment which is sealed with a closed cell E.P.D.M. gasket.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior to power wash and paint. A four step iron phosphate pretreatment for protection and paint adhesion is utilized. 400°F bake for maximum hardness and durability.
DSAPL/DSDPL Fixture Specifications and Ordering
Diffuser
Housing
Socket
GlassLens
Lampby Others
Ballast
42www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSAPL1
XPE
1030C5.25" to 3.5" Dia. Cast, Fluted, Tapered Alum.
4000
DSAPL25
XPC
RNTS 205-75" Dia. Steel
-
DSAPL1-WM
XWB
-
-
Suggested DSAPL Combinations
B4C-BALBOLLARD
DSAPL1/CA
XBB-2
10505" Dia. Alum.
300
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
43 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSDPL25
XPG
1030C5.25" to 3.5" Dia. Cast, Fluted, Tapered Alum.
3600
DSDPL25
XBC-2
RTS 20-116" to 3" Dia. Tapered Steel
-
DSDPL1
XPH
10604" Dia. Fluted Alum.
4300
DSDPL1-WM
XPD
-
-
Suggested DSDPL Combinations For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
44www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
18.75"(476mm)
25"(635mm)
16"(406mm)
20"(508mm)
DSTPL
DSTPL25250W Max.EPA: 1.23Max. Wt: 46lbs
DSTPL1150W Max.EPA: .83 Max. Wt: 25lbs
Straight Sided Shade
Prismatic or Opal Glass
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
SCALE: 3/8" = 1'-0"
22.5"(572mm)
28"(711mm)
15"(381mm)
22"(559mm)
DSCPL
DSCPL25250W Max.EPA: 1.39Max. Wt: 50lbs
DSCPL1150W Max.EPA: 0.72 Max. Wt: 30lbs
Curved Sided Shade
Prismatic or Opal Glass
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
45 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
WATTS TYPE VOLTS
250 4
175 4 HPS150T 3
150100
PSMH 120208240277347 (CAN)
480
E 2 (ELECTRONIC)
E 2 (ELECTRONIC)
2 – 120 THRU 277 ONLY3 – G12 BASE4 – POSITION SENSITIVE LAMP
120208240277347 (CAN)
480
HPSPSMH150T 3
15010070T 3
7050
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
STANDARDTEXTURED FINISH
DSTPL25
DSTPL1
Spec/Order Example: DSCPL1/150PSMH277/HR-V-SQ/1/RAL9005-T
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . . DF
3/4" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . WP
FixtureSpec/Order from this page.
HORIZONTAL SEGMENTEDREFLECTORS
TYPE I I HR-II . . . . . . . .
TYPE I I I HR-III. . . . . . . .
TYPE I VHR-I V . . . . . . . .
FORWARD THROW(HOUSE SIDE CUT-OFF)HR-FT-HSC. . .
TYPE V SQUAREHR-V-SQ. . . . .
Arms, Poles and BasesSee pages 47 & 48 for suggested Arm, Pole and Base combinations.
DSCPL25
DSCPL1
Housing – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy, minimum .125" wall thickness. Windows in the lower portion of the ballast housing allow for decorative illumination (horizontal optics only) .Optical housing is spun from .080" aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless steel thumbscrew allows for tool less entry to the optical compartment which is sealed with a closed cell E.P.D.M. gasket.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior to power wash and paint. A four step iron phosphate pretreatment for protection and paint adhesion is utilized. 400°F bake for maximum hardness and durability.
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
DSCPL/DSTPL Fixture Specifications and Ordering
Ballast
Diffuser
Housing
Socket
GlassLens
Lampby Others
46www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSCPL1
XPC-2
10705" Dia. Fluted Alum.
700
DSCPL25
XPR
1035T5" to 3" Dia. Tapered Alum.
5200
DSCPL1-WM
XBB
-
-
Suggested DSCPL Combinations
B4C-CAPBOLLARD
DSCPL1/CP
XBC
1058C7" to 4" Dia. Cast, Fluted, Tapered Alum.
4400
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
47 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSTPL25
XBC
1080C7" to 4" Dia. Cast, Octagonal, Tapered Alum.
1400
DSTPL1
XPR-2
1046T6" to 4" Dia. Tapered Alum.
1300
DSTPL25
XPH
TFS 21646" to 4" Dia. Fluted, Tapered Steel
3600SB
DSTPL1-WM
XBB
-
-
Suggested DSTPL Combinations For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
48www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
26.5"(673mm)
25"(635mm)
20"(508mm)
21.5"(546mm)
DSDPM
DSDPM25400W Max.EPA: 1.81Max. Wt: 56lbs
DSDPM1150W Max.EPA: 1.21 Max. Wt: 37lbs
Prismatic or Opal Glass
Curved Sided Shade
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
24"(610mm)
25"(635mm)
16.5"(419mm)
20"(508mm)
DSAPM
DSAPM25400W Max.EPA: 1.52Max. Wt: 42lbs
DSAPM1150W Max.EPA: 0.88 Max. Wt: 34lbs
Prismatic or Opal Glass
Straight Sided Shade
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
SCALE: 3/8" = 1'-0"
49 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
WATTS TYPE VOLTS
175 4
HPS
150T 3
150100
PSMH 120208240277347 (CAN)
480
400350 320315 5
250
E 2 (ELECTRONIC)
E 2 (ELECTRONIC)
2 – 120 THRU 277 ONLY3 – G12 BASE4 – POSITION SENSITIVE LAMP
120208240277347 (CAN)
480
HPSPSMH150T 3
15010070T 3
7050
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
STANDARDTEXTURED FINISH
DSAPM25
DSAPM1
Spec/Order Example: DSAPM25/175PSMH277/VR-V-SQ/1/RAL9003/DG/DF
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . . DF
3/4" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . WP
FixtureSpec/Order from this page.
HORIZONTAL SEGMENTEDREFLECTORS
TYPE I I HR-II . . . . . . . .
TYPE I I I HR-III. . . . . . . .
TYPE I VHR-I V . . . . . . . .
FORWARD THROW(HOUSE SIDE CUT-OFF)HR-FT-HSC. . .
TYPE V SQUAREHR-V-SQ. . . . .
Arms, Poles and BasesSee pages 51 & 52 for suggested Arm, Pole and Base combinations.
DSDPM25
DSDPM1
Housing – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy, minimum .125" wall thickness. Windows in the lower ballast housing allow for decorative illumination (horizontal optics only). Horizontal louvers (decorative bands – illuminated) are made of heavy gauge aluminum sheet and welded to the ballast housing. Optical housing is spun from .080" aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless steel thumbscrew allows for tool less entry to the optical compartment which is sealed with a closed cell E.P.D.M. gasket.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior to power wash and paint. A four step iron phosphate pretreatment for protection and paint adhesion is utilized. 400°F bake for maximum hardness and durability.
DSAPM/DSDPM Fixture Specifications and Ordering
Ballast
Diffuser
Housing
Socket
GlassLens
Lampby Others
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
50www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSAPM25
XPC
10404" Dia. Alum.
3200
DSAPM25
XPJ
1058C7" to 4" Dia. Cast, Fluted, Tapered Alum.
7500
DSAPM1-WM
XWB
-
-
Suggested DSAPM Combinations
B4EL-CAP(ILLUMINATED)
BOLLARD
DSAPM1/CP
XPG-2
10705" Dia. Fluted Alum.
4500
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
FSS4FIXEDSTREET SIGN
Fixture
Arm
Pole
Base
51 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSDPM1
XPR
RTA 1853-1885" to 3" Dia. Tapered Alum.
3300
DSDPM1
XPC-2
RNTA 205-1885" Dia. Alum.
-
DSDPM25
XBC
TFS 20646" to 4" Dia. Cast, Fluted, Tapered Steel
4400SB
DSDPM1-WM
XWA
-
-
Suggested DSDPM Combinations For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
52www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
19"(483mm)
25"(635mm)
16.5"(419mm)
20"(508mm)
DSTPM
DSTPM25250W Max.EPA: 1.21Max. Wt: 54lbs
DSTPM1150W Max.EPA: .83 Max. Wt: 31lbs
Straight Sided Shade
Prismatic or Opal Glass
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
SCALE: 3/8" = 1'-0"
22.5"(572mm)
28"(711mm)
15"(381mm)
22"(559mm)
DSCPM
DSCPM25250W Max.EPA: 1.40Max. Wt: 58lbs
DSCPM1150W Max.EPA: 0.74 Max. Wt: 36lbs
Curved Sided Shade
Prismatic or Opal Glass
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
53 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
WATTS TYPE VOLTS
250 4
175 4 HPS150T 3
100100
PSMH 120208240277347 (CAN)
480
E 2 (ELECTRONIC)
E 2 (ELECTRONIC)
2 – 120 THRU 277 ONLY3 – G12 BASE4 – POSITION SENSITIVE LAMP
120208240277347 (CAN)
480
HPSPSMH150T 3
15010070T 3
7050
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
MODEL MOUNTING FINISH OPTIONS
4-90 . . . . . . . . . .
2-180 . . . . . . . . .
3-120 . . . . . . . . .
1 . . . . . . . . . . . . . . .
WM . . . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
STANDARDTEXTURED FINISH
DSTPM25
DSTPM1
Spec/Order Example: DSTPM25/150TPSMH277E/HR-II/1/RAL7004
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . . DF
3/4" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . WP
FixtureSpec/Order from this page.
HORIZONTAL SEGMENTEDREFLECTORS
TYPE I I HR-II . . . . . . . .
TYPE I I I HR-III. . . . . . . .
TYPE I VHR-I V . . . . . . . .
FORWARD THROW(HOUSE SIDE CUT-OFF)HR-FT-HSC. . .
TYPE V SQUAREHR-V-SQ. . . . .
Arms, Poles and BasesSee pages 55 & 56 for suggested Arm, Pole and Base combinations.
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
DSCPM25
DSCPM1
Housing – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy, minimum .125" wall thickness. Windows in the lower ballast housing allow for decorative illumination (horizontal optics only). Horizontal louvers (decorative bands – illuminated) are made of heavy gauge aluminum sheet and welded to the ballast housing. Optical housing is spun from .080" aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless steel thumbscrew allows for tool less entry to the optical compartment which is sealed with a closed cell E.P.D.M. gasket.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior to power wash and paint. A four step iron phosphate pretreatment for protection and paint adhesion is utilized. 400°F bake for maximum hardness and durability.
DSCPM/DSTPM Fixture Specifications and Ordering
Ballast
Diffuser
Housing
Socket
GlassLens
Lampby Others
54www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSCPM25
XBC
RNTS 204-114" Dia. Steel
-
DSCPM1
XPG-2
1046T6" to 4" Dia. Tapered Alum.
4400
DSCPM1-WM
XPC
-
-
Suggested DSCPM Combinations
DSCPM1/WP
XPH
10604" Dia. Fluted Alum.
4000
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
B23C-BALBOLLARD
Fixture
Arm
Pole
Base
55 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSTPM25
XBC
TFS 20646" to 4" Dia. Fluted, Tapered Steel
3600SB
DSTPM1
XPC-2
10604" Dia. Fluted Alum.
2400SB
DSTPM1
XPR
10404" Dia. Alum.
400M
DSTPM1-WM
XPE
-
-
Suggested DSTPM Combinations
B13E-BALBOLLARD
For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
RBHROTATABLE BASKET HOLDER
Fixture
Arm
Pole
Base
56www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
23.5"(597mm)
30"(762mm)
15"(381mm)
20"(508mm)
DSS
DSS1400W Max.EPA: 1.72Max. Wt: 58lbs
DSS2150W Max.EPA: 0.71 Max. Wt: 26lbs
Prismatic or Opal Glass
Curved Sided Shade
24"(610mm)
24"(610mm)
41"(1041mm)
41"(1041mm)
SCALE: 3/8" = 1'-0"
57 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
LAMP/BALLAST MODE OPTICS
CONSULT FACTORY FOR OTHER BALLAST CONFIGURATIONS AND LAMP OPTIONS
WATTS TYPE VOLTS
400350 HPS320315 5
250210 5
20064LED 2
80LED 2
120LED 2
PSMH 120208240277347 (CAN)
480
E 2 (ELECTRONIC)
E 2 (ELECTRONIC)
2 – 120 THRU 277 ONLY3 – G12 BASE4 – POSITION SENSITIVE LAMP5 – “E” BALLAST ONLY
STANDARD MAGNETIC BALLAST
STANDARD MAGNETIC BALLAST
MODEL MOUNTING FINISH OPTIONS
DSS1
DSS2
DARKBRONZERAL-8019-T
GREENRAL-6005-T
WHITERAL-9003-T
GREYRAL-7004-T
BLACKRAL-9005-T
WALL MOUNT
ARM MOUNT
4-90 . . . . . . . .
2-180 . . . . . . .
3-120 . . . . . . .
1 . . . . . . . . . . . . .
WM . . . . . . . . . . .
FOR SMOOTH FINISH REMOVE
SUFFIX “T”(EXAMPLE: RAL-9005)
CONSULT FACTORY FOR CUSTOM COLORS
STANDARDTEXTURED FINISH
HORIZONTAL SEGMENTEDREFLECTORS
MODEL-2 VERTICAL SEGMENTED REFLECTOR REQUIRES CONVEX GLASS
MODEL-1 FLAT GLASS LENS STANDARD FOR VERTICAL SEGMENTED REFLECTOR
VERTICAL SEGMENTEDREFLECTORS
TYPE I I HR-II . . . . . . . .
TYPE I I I HR-III. . . . . . . .
TYPE I VHR-I V . . . . . . . .
FORWARD THROW(HOUSE SIDE CUT-OFF)HR-FT-HSC. . .
TYPE V SQUAREHR-V-SQ. . . . .
ASYMMETRICVR-ASY. . .
SYMMETRICVR-V-SQ. . . .
Spec/Order Example: DSS1/315PSMH277E/HR-III/1/BL-RAL9005-T
CHAIN MOUNTED(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE (EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE (120V, 277V) . . . . . . . . . SF
DOUBLE FUSE (208V, 240V) . . . . . . . . . DF
3/4" IPS STEM MOUNTAND SWIVEL CANOPY(4'-0" MAX.) . . . . . . . . . . . . . . SM
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS -ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -POLYCARBONATE ( 175W MAX.) . . WP
120208240277347 (CAN)
480
HPSPSMH150T 3
15010070T 3
705064LED 2
80LED 2
FixtureSpec/Order from this page.
Arms, Poles and BasesSee pages 59 & 60 for suggested Arm, Pole and Base combinations.
Housing – (For up to 175W) – Ballast housing is spun from .080" aluminum. Internal ballast support bracket also functions as mounting reinforcement plate and has a minimum thickness of .125". (For 250W & above) – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy, minimum .125" wall thickness. Optical housing is spun from .080" aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless steel thumbscrew allows for tool less entry to the optical compartment which is sealed with a closed cell E.P.D.M. gasket.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling prior to locking the swivel. When side arm mounted, the housing is externally welded to the mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with 20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior to power wash and paint. A four step iron phosphate pretreatment for protection and paint adhesion is utilized. 400°F bake for maximum hardness and durability.
DSS Fixture Specifications and Ordering
Ballast
Housing
Socket
GlassLens
Lampby Others
58www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
DSS1
XBC
TFS 25646" to 4" Dia. Tapered Steel
3600SB
DSS2
XPC-2
10606" to 4" Dia. Tapered Alum.
3200
DSS2
XPR
10303" Dia. Alum.
400M
Suggested DSS Combinations
B13E-BALBOLLARD
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
Fixture
Arm
Pole
Base
For additional Contemporary Shafts, Arms and specifications, please refer to the U.S. Architectural Lighting binder or our website, www.usaltg.com.
59 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
Suggested DSS Combinations
DSS2
XBB-2
RNTS 185-75" Dia. Steel
-
DSS1
XPS
RTA 2574-1887" to 4" Dia. Tapered Alum.
-
DSS2-WM
XWA
-
-
DSS2
-
-
-
For additional Decorative Arms, Shafts, Bases and specifications, please refer to the Sun Valley Lighting binder or our website, www.usaltg.com.
2'
4'
6'
8'
10'
12'
14'
16'
18'
20'
22'
24'
26'
28'
SMSTEM MOUNT
Fixture
Arm
Pole
Base
60www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.
PULSE START METAL HALIDE
LAMPWATTS
LAMPTYPE
BULBTYPE
INITIALLUMENS
LIFE(HOURS)
ANSICODE
STARTINGTEMP.
CIRCUITTYPE VOLTS
MAXINPUT AMPS
MIN.FUSE AMPS
Lamp / Electrical Guide
HIGH PRESSURE SODIUM
LED
120277120208240277347347
0.680.311.901.000.900.800.700.65
22432222
70 PSMH 5,9006,600
M98M139M143
M139
24,00012,000
-20°F Electronic
HX-HPF
Clear, ED17, Med. BaseT6,G12 Base
315
400
PSMH 36,200 C182/E20,000 -4°F Electronic 200 (208V)277
1.801.30
33
Clear, T9, PGZ18 Base
4,800 60,000 -120,000
-40°F 120277
60 0.600.30
48 LED Straight 48 LED Optical Tower Module
3,437 -3,740
70,000 -140,000
-40°F 120277
71 0.700.40
64 LED 64 Optical Module
3,906 -4,251
70,000 -140,000
-40°F 120277
88 0.800.40
80 LED 80 Optical Module
5,240 -5,808
70,000 -140,000
-40°F 120277
132 1.200.60
120 LED 120 Optical Module
120277120208240277347
0.960.422.301.401.201.001.00
3364332
100 PSMH 9,000 M90
M140
24,000 -20°F Electronic
HX-HPF
Clear, ED17, Med Base
150 PSMH
SYSTEMWATTS
8281909090909094
343341
250 PSMH 22,000 M138M153
15,000 -20°F Super CWA 120208240277347
2.501.401.301.100.90
85533
Clear, ED28, Mog. BaseHoriz. only
291291291291291
-20°F
-20°F
PSMH 40,000
40,000
M135
M155M172
20,000
20,000+
Electronic
Super CWA
200 (208V)277120208240277347480
2.201.603.802.201.901.701.401.00
331075543
Clear, ED28, Mog. BaseHoriz. onlyClear, ED28, Mog. BaseVert. only
430430452452452452450452
210 PSMH 23,000 C183/E20,000 -4°F Electronic 200 (208V)277
1.200.90
33
Clear, T9, PGZ18 Base 229227
9191919193
115113129129129129129
165161185185185185185
13,00012,700
M102M142
24,00012,000
-20°F Electronic
HX-HPF
120277120208240277347
1.400.603.702.101.801.601.30
2243222
Clear, ED17, Med BaseT6, G12 Base
70 HPS 120208240277347
1.400.900.800.700.60
53222
6,300 S6224,000 -40°F HX-HPFClear, BD17, Med. Base
130130130130130
100 HPS 120208240277347
2.201.301.100.900.70
75333
9,500 S5424,000 -40°F HX-HPFClear, BD17, Med. Base
188188188188188
150 HPS 120208240277347
2.801.601.401.300.90
105543
16,000 S5524,000 -40°F HX-HPFClear, BD17, Med. Base
295295295295295
250 HPS 120208240277347
2.501.501.301.100.90
74432
27,000 S5024,000 -40°F CWAClear, ED18, Mog. Base
464464464464464464
400 HPS 120208240277347480
3.802.201.901.701.301.00
1085553
50,000 S5124,000 -40°F CWAClear, ED18, Mog. Base
®
®
®
61 www.usaltg.comU.S.ARCHITECTURAL/SUN VALLEY LTG.
DSA/DSC/DSD/DST/DSHOptics – A clear tempered glass linear prismatic diffuser seals against the housing with a closed cell EPDM gasket and imparts a round Type V distribution. Medium base (E26) or bi-pin base (G12) socket provided for the lamp. Lamp is vertically oriented.
DSAR/DSCR/DSDR/DSTR/DSHR/DSARB/DSCRBOptics - For Standard Polycarbonate Refractor - A clear prismatic polycarbonate lens, utilizing UvaLex® to retard yellowing from UV, seals against the housing with a closed cell EPDM gasket. For Optional Acrylic Refractor - A clear prismatic acrylic lens seals against the housing with a closed cell EPDM gasket. Medium base (E26) or bi-pin base (G12) socket provided for the lamp. Lamp is vertically oriented.
DSAP/DSCP/DSDP/DSTP/DSAPL/DSCPL/DSDPL/DSTPL/DSAPM/DSCPM/DSDPM/DSTPM/DSSReflector Module - Specular Alzak® optical segments rigidly mounted in an aluminum frame, which attaches to the housing as a one piece module. Reflector module is field rotatable in 90°increments. All sockets are porcelain 4KV pulse rated, medium base (E26) for 50W – 150W, bi-pin (G12) for 70W and 150W, or pinoriented mogul base (E40) for 250W and 400W (DSS only). Reflector modules are factory prewired with a quick-disconnect plug. Lamp is vertically or horizontally mounted.
DSA/DSC/DSD/DST/DSH/DSAR/DSCR/DSDR/DSTR/DSHR/DSARB/DSCRBElectrical Components - All electrical components are UL and cUL recognized mounted on a single plate and factory wired with quick-disconnect. Electrical module attaches to housing with toolless hinge and latch. Electronic MH ballasts have power factor of >.95, -20°F starting, 120-277V 50Hz/60Hz and have lamp End-of-life protection. Magnetic MH ballasts are high power factor, -20°F starting, multi-tap 120-277V, 60Hz. All HPS ballasts are core and coil, high-reactance, high power factor, -40°F starting.
DSAP/DSCP/DSDP/DSTP/DSAPL/DSCPL/DSDPL/DSTPL/DSAPM/DSCPM/DSDPM/DSTPM/DSSElectrical Components – All electrical components are UL and cUL recognized mounted on a single plate and factory wired with quick-disconnect. Electrical module attaches to housing with toolless hinge and latch. Electronic MH ballasts have power factor of >.95, -20°F starting, 120-277V 50Hz/60Hz and have lamp End-of-life protection. Special for Philips MasterColor CDM Elite: Electronic MH ballast has a power factor of >.90 (210W & 315W), -4°F starting, 200 - 277V, 50Hz/60Hz and has lamp End-of-life protection. 315W electronic MH ballast has 0 – 10V dimming capability. Magnetic MH ballasts are high power factor (70W – 150W) or CWA (250W), -20°F starting, multi-tap 120-277V, 60Hz. All HPS ballasts are core and coil, high-reactance, high power factor (70W – 150W) or CWA (200W – 250W), -40°F starting.
®
DSA/DSC/DSD/DST/DSH/DSAR/DSCR/DSDR/DSTR/DSHR/DSARB/DSCRBLED Tower Module - LED optical assembly consists of an array of 6 LED “capsules” mounted to a barrier plate and aimed 60° apart. Each capsule consists of LED’s mounted to a vented circuit board with copper lined holes which conduct heat from the component side of the circuit board to the mounting side. Stainless steel screws are located between each LED to secure the circuit board to a heat-transfer plate which in turn is mounted to an extruded aluminum finned heat-sink. Each LED has a specular formed and polished reflector optic to direct output downward through an etched acrylic lens. The entire assembly is enclosed by a clear tempered glass linear prismatic diffuser or optional opal glass diffuser (DSA/DSC/DSD/DST/DSH); or a clear polycarbonate (optional acrylic) refractor which produces an IES Type II, Type III, Type IV, or Type V Round distribution (DSAR/DSCR/DSDR/DSTR/DSH/ DSHR/DSARB/DSCRB)
DSAP/DSCP/DSDP/DSTP/DSAPL/DSCPL/DSDPL/DSTPL/DSAPM/DSCPM/DSDPM/DSTPM/DSS
Optical Module – Low copper A356 alloy (<.2% copper) cast aluminum housing. Integrated clear tempered 3/16” glass lens sealed with a continuous silicone gasket protects emitters (LED's) and emitter Reflector-Prism optics, and seals the module from water intrusion and environmental contaminants. Entire module is IP67 rated. Emitters (LED's) are Luxeon Rebels, high output, Neutral White nominal 4100K CCT for the entire module (Cool White nominal 6500K are available). Each emitter is optically controlled by a Reflector-Prism injection molded from H12 acrylic (3 types per module; one from 0° - 50°; one from 50° - 65°; one from 65° - 72°). Each Reflector-Prism has indexing pins for aiming and is secured to an optical plate made of matte black anodized aluminum. The optical plate locates every Reflector-Prism over an emitter. Reflector-Prisms are secured to the optical plate with a UV curing adhesive. The Reflector-Prisms are arrayed to produce IES Type II, IES Type III, IES Type IV, and IES Type V-SQ distributions. The entire Optical Module is field rotatable in 90° increments. Both module and drivers are factory wired using water resistant, insulated cord. Lens, module and drivers are field replaceable.
LED Driver(s) – Drivers are UL and cUL recognized mounted on a single plate and factory wired with quick-disconnect. Constant current drivers are electronic and have a power factor of >.90 and a minimum operating temperature of - 40°F. Drivers accept an input of 120-277V, 50/60Hz. (Consult factory for dimming applications.)
See Catalog for a complete presentation on the System.
®
®
NOTES:1
2
3
4
U.S. Architectural Lighting’s Lamp and Electrical Guide is for reference only. ALWAYS consult lamp and ballast manufacturer’s data for exact technical specifications.
All Initial Lumen values shown are approximate and may vary from one manufacturer to another.
For HX-HPF circuits, Max Input Amps is the highest of starting, operating, or opening circuit currents. For CWA circuits, the figure is operating current.
Lumen values for LED Modules vary according to the distribution type.
WARNING: All fixtures must be installed in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury.
Optical System/Electrical Components Specifications
HID LED
62www.usaltg.com U.S.ARCHITECTURAL/SUN VALLEY LTG.