D&S Partnership

Europe’s leading pump manufacturer

Over 20 years partnership with D&S

quality & reliable solutions

Specialty in Surface, Well, Borehole,

sewage & drainage pumps

PEDROLLO PK

Cast iron-epoxy electro coated body

Motor bracket- aluminium with brass insert-reduce seizure

Impeller-brass with peripheral vanes

5.4m3/h, 100m, Suction lift 8m, -10oC to +60oC

Easy to use & economical

Can be used with small pressure tank & pressure control

*Option of hydrofresh available

PEDROLLO CP

Cast iron-epoxy electro coated body

Body backplate-AISI304 (cast iron-CP170, 190, 200)

Impeller-AISI304, 9.6m3/h, 56m, Suction lift 7m

-10oC to +90oC

Can be used with small pressure tank & pressure control

*Option of hydro fresh available

*Option of AISI304 (CP ST4) & AISI316 (CP ST6) available

PEDROLLO JSW

Jet Pumps-Self priming

Body -cast iron, Back plate-SS, Impeller-AISI304

4.2m3/h, 48m, Suction lift 9m, -10oC to +40oC

Clean water that may contain air

Reliable & easy to use

Can be used with small pressure tank & pressure control

PEDROLLO PKS

Cast iron-epoxy electro coated body

Motor bracket- aluminium with brass insert

Impeller-brass with peripheral radial vanes

3m3/h, 70m, Suction lift 9m, -10oC to +60oC

In medium containing air or gas

Best for drawing water from underground tanks

Can be used with small pressure tank & pressure control

Pump has a flap check valve (non return valve)

PEDROLLO CK

Cast iron pump body

Impeller -brass with star type open radial vane

High suction lift-9m (3m3/h & 51m)

In installations that may contain air or irregular fluid

& Diesel

PEDROLLO AL RED

Stainless Steel pump body, back plate &

impeller-guaranteeing complete hygiene & max

resistance to corrosion

9.6m3/h, 23m closed head

-10oC to +90oC temp range

Domestic, agricultural & industrial application

PEDROLLO PQ 3000

Stainless Steel AISI 316 pump body-

guaranteeing complete hygiene & max resistance

to corrosion

Impeller- Bronze

3m3/h, 180m,

Industrial application

PEDROLLO NGACentrifugal pumps with Open Impeller

Cast iron pump body with AISI304 backplate & SS AISI316

Impeller

Open impeller allows –liquids containing relatively high

levels of impurities without clogging the impeller- rivers,

canals & reservoirs

Thermal cut out available for single phase mechanical

overload protection

Option available in SS AISI316 for all parts in contact with

pumped medium

PEDROLLO 4CR80 & 5CRm100Self priming multistage pump

3CRm60-N 0.37kw

3CRm100-N 0.55kw

4CRm80 0.55kw

5CRm100 0.75kw -new

AISI304 S/S pump housing, noryl impellers & diffusers

0.5m3/hr – 7.8m3/hr at between 9m to 60m head

Extremely Quiet

Temp -10oC to +40oC

Good for installations with air in medium,

Can be connected to a pressure tank

PEDROLLO PLURIJET 60-80-100 SS pump body

Noryl Impeller

Low –flow & head (7m3/h 50m)

Silent, reliable & low energy consumption

Good for installations with air in medium

Can be connected to a pressure tank

Suction 9m

Thermal cut out available for single

phase mechanical overload protection

PEDROLLO PLURIJET 90-130-200

SS pump body

Noryl Impeller

High –flow & head (12m3/h 100m)

Silent, reliable & low energy consumption

Good for installations with air in medium

Can be connected to a pressure tank

Suction 9m

Thermal cut out available for single

phase mechanical overload protection

PEDROLLO TOP

Fibre-glass pump construction with techno-plastic reinforcement

Used for clear water (10mm)

Open centrifugal impeller for water containing light silt loads

NORYL impeller and external float switch for automatic pump

control starting and topping

Double seal -complete motor cooling

Thermal cut-out to protect against overload

PEDROLLO TOP VORTEX

Fibreglass pump construction with technoplastic reinforcement

Easy to use & reliable

Used for Dirty water (20mm diameter)

Open centrifugal impeller for water containing light silt loads

Technopolymer impeller-Vortex and external float switch for

automatic pump control starting and topping

Double seal -complete motor cooling

Thermal cut-out to protect against overload

3m max immersion depth

PEDROLLO Dm

Body-Cast iron, epoxy coated

Impeller-Technopolymer open type

16.5m3/h, 26m head

Max Immersion depth-5m

Used for Dirty water (10mm diameter)

Clean or slightly dirty water

Reliable especially under automatic operating conditions

PEDROLLO TOP Multi

Fibre-glass pump construction with techno-plastic

reinforcement

7.2m3/h, 42m

1.3mm suspended solids, 22mm agl, 40oC

Multi for manual -foatswitch

Jacketed motor design for excellent cooling performance

Double mechanical seal for total motor sealing

Thermal cut-out to protect against overload

Works better with a pressure tank (3-5)Litres

PEDROLLO TOP Tech 2

Fibre-glass pump construction with techno-plastic reinforcement

7.2m3/h, 42m, 1.3mm suspended solids, 22mm agl, 40oC

Automatic-Pressure below 1.5bar-starts pump

Flow below 3l/m-stops pump-against dry running

Prolonged inactivity-every 48hrs pump runs for 10s

Jacketed motor design for excellent cooling performance

Double mechanical seal for total motor sealing

Thermal cut-out to protect against overload

**Vertical distance btn pump outlet and delivery point should not exceed 10m

PEDROLLO DAVIS

Stainless steel pump housing

Direct connection to mains power

Brass impeller resistant to abrasion

Very clean water (3m3/h – 75m )

Vertical & horizontal installation

Include a float switch incase of well installation

Thermal cut-out to protect against overload

20/40m drop cable available

PEDROLLO UP Stainless steel pump housing

Independent NORYL floating impellers to minimize blockage

Max sand handling-150g/m3

Raised suction point

Float switch included

Jacketed motor design for effective cooling

20m drop cable available

Almost 2/3 smaller in size and cost compared to the NK version.

Improved efficiency

4 Block/Sali

Stainless steel pump housing

High efficiency & reliability

Up to 150g/m3 of silt

Inbuilt thermal overload for motor protection

Direct mains connection through 10A fuse or MCB

Include a float switch incase of well installation

60m max immersion depth

20m drop cable available

Fluid Solar

4” Multi stage Stainless steel solar pump

High performance motor -permanent magnets

Up to 150g/m3 of silt

Electronic control incorporated in the motor

Supplied complete with a digital control box

Recommended Voltage -(70-110)V, 1000w

4mm2 -40m cable

6mm2-60m cable

4 SR & 6SR WET END

AISI304 Stainless steel pump housing

150g/m3 silt content handling capacity-4SR –19m3/h, 400m-4SR

100g/m3 silt content handling capacity-6SR – 60m3/h, 350M-6SR

Impeller-Lexan (4SR1-8), Norly (4SR10-15),

6SR-Special rubber coated Norly

High efficiency and reliability

Non-return valve

98mm external diameter-4SR

149.5mm external diameter-6SR

4 PD & 6PD SUB-MOTORS

4” and 6” Pedrollo Sumbersible motors

Range 0.37kw to 18.5kW-Oil filled, rewindable

4PD-Jacket AISI 316, shaft Duplex S/S

Resistance to corrosion-high chloride levels

High efficiency and reliability

IP68 as compared to others IP58 (max protect against dust

particles & immersion)

6PD-Jacket AISI 304,

Priced similar to Tesla

Easy Small & Easy Press

Dry run protection with automatic restart

Stops-below 2l/m.

Easy-press-replaces Pressure tank

Easy-small-automatically tries to resume

normal service at intervals of 15, 30, 60)min.

Also manual at any time-when needed

Controlled cycling frequency incase of

pressure leakage

LED status indicators to monitor pump

operation

Strong IP65 rated weather sealed housing

Controllers

PEDROLLO TRITUS 1.1kW & 2.2kW 3ph Grinder pump,

Heavy gauge robust cast iron construction with Epoxy &

Electro coated body

Impeller-Technopolymer open type

• Grinder-Tempered AISI 440C stainless steel

• Grinds suspended solids and fibres in sewers

3m3/hr - 15m3/hr at 17m to 31m head

10m –max. immersion depth

cw floatswitch

PEDROLLO VX

VX40/40 3kW Sewage pump introduced

Heavy duty cast iron construction with S/S

pump housing, Vortex impeller-Cast Iron

• Two mechanical seals separated by an oil chamber •

10m3/hr - 40m3/hr at 11m to 21m head

10m –max. immersion depth

40mm particle size passage

Questions?