drylin stainless steel - igus
Transcript of drylin stainless steel - igus
967
drylin® stainless steel
Lubricant free Temperature resistant up to +250 °C Corrosion resistant Chemical resistant Standard parts with quick delivery
968 969
drylin® stainless
steel
3D-CAD files, prices and delivery time www.igus.co.uk/drylinESLifetime calculation, configuration and more www.igus.co.uk/drylinES
Machine parts made from stainless steel are designed to survive in the worst environments. Heat, pres- sure, seawater, liquid and gaseous media like detergents and other chemicals. If these machine parts also have to work as a bearing, the combination with iglidur® high-performance polymers is ideal. All bearings are lubricant free and the plastic parts are positive fit.
The suitable iglidur material can be selected according to the application and used for linear and/or rotary motions.
Lubricant free Temperature resistant up to +250 °C Corrosion resistant Resistant to chemicals Cost-effective
Industries and application areas: Food and bottling industry Meat processing Harbor and crane facilities Yacht building Chemical industry Electroplating industry Medical and rehabilitation technologies Packaging industry
The use of 1.4571 and 1.4301 stainless steels mean that the range is resistant to both sea water and aggressive chemicals. Even though these stainless steels are not hardened, they can still be used with igus bearing materials. In addition, the large surface area of a drylin bearing helps to keep the surface pressure to a very low level
Lubrication freedom with drylin® for a baking and conveyor unit
drylin® W is accredited to Cleanroom-standards and therefore used in this blister machine.
drylin® stainless steel | Advantages drylin® R linear plain bearing | Product range
d2d1
s
BB1
dn
Part No. d1-Tolerance78) F max. dynamic82) F max. static82) WeightP = 5 MPa P = 35 MPa
[mm] [N] [N] [g]
RJUM-01-12-ES +0.030 +0.088 960 6,720 60RJUM-01-16-ES +0.030 +0.088 1,440 10,080 84RJUM-01-20-ES +0.030 +0.091 2,250 15,750 147RJUM-01-25-ES +0.030 +0.091 3,625 25,375 324RJUM-01-30-ES +0.040 +0.110 5,100 35,700 486
Part No. d1 d2 B B1 s dnh7 h10 H10 H10 h10
RJUM-01-12-ES 12 22 32 22.6 1.30 20.5RJUM-01-16-ES 16 26 36 24.6 1.30 24.2RJUM-01-20-ES 20 32 45 31.2 1.60 29.6RJUM-01-25-ES 25 40 58 43.7 1.85 36.5RJUM-01-30-ES 30 47 68 51.7 1.85 43.5
Technical Data
Dimensions [mm]
Closed stainless steel adapter 1.4305
Dimensions corresponding to the standard for recirculating ball bearings
78) According to igus® testing method page 92482) Design standards page 878Please note: Installation instructions page 879
Also available with liners:
JUM-11 XUM-01 E7UM-01
Size Options
Order key
R J U M-01-12-ES
Clo
sed
iglid
ur® J
Stan
dard
Dia
met
er
Met
ric
Line
r
Stai
nles
s St
eel
Type
970 971
drylin® stainless
steel
drylin® stainless
steel
3D-CAD files, prices and delivery time www.igus.co.uk/drylinESLifetime calculation, configuration and more www.igus.co.uk/drylinES
WS-10-40-ES-FG
WJUM-01-10-ES-FG59)
WJUM-01-16-ES-FG59)
WJUM-01-20-ES-FG59)
WJUM-01-25-ES59)
WS-10-ES-FGWS-16-ES-FGWS-20-ES-FGWS-25-ES-FG
WS-10-ES-FGWS-16-ES-FGWS-20-ES-FGWS-25-ES-FG
WS-10-40-ES-FG
Single rail round, made from stainless steel V4A Round double rail and housing bearing, made from V4A stainless steel
Material for housing and shaft support 1.4408 (AISI 316)Shaft material 1.4571 (AISI 316Ti)
Size 10–20Material for housing and shaft support 1.4408 (AISI 316)Shaft material 1.4571 (AISI 316Ti)Size 25Material for shaft, shaft support, housing 1.4571 (AISI 316Ti)
Technical data and dimensions [mm]
59) Alternative with XUMO-01-... liners for high temperatures available. Part number: WXUM-01-...
Housing bearing round, made from stainless steel V4A
Technical data and dimensions [mm]
Part No. C4 C5 C5 C6 C6 K1 for screwmin. max. min. max.
DIN 912
120 20 79.5 20 79.5 M6
Technical data and dimensions [mm]
Part No. Weight B C1 C3 A3 K2 K3 Stat. load capacity Countersunk
head screwCoy Coz+ Coz-
[g] [N] [N] [N]
57 26 29 16 6.5 M6 M5 3,800 3,800 950134 34.5 36 18 9 M8 M6 6,900 6,900 1,450280 42.5 45 27 9 M8 M6 11,000 11,000 1,900564 52.5 58 36 11 M10 M8 16,000 16,000 3,600
57) Height dimension minus the bearing clearance tolerance 58) With plain holes
Part No. Weight H57) da L a h h1 h2 G1 G2 A1 Q1 Q2±0.25 -0.1 max. –0.3
[kg/m]
0.87 18 10 3,000 27 5.5 5.558) 9 27 17 16.5 - -2.22 27 16 3,000 27 12 4.5 14 33 19 25 32 283.37 36 20 3,000 27 16 8 20 38 21 30 37 375.21 45 25 4,000 32 11.5 5.5 25 46.5 25.5 37.5 45.5 46
Part No. C4 C5 C5 C6 C6 K1 for screw
ly lz Wby Wbzmin. max. min. min.
DIN 912 [mm4] [mm4] [mm3] [mm3]
120 20 79.5 20 79.5 M658) 491 491 98 98120 20 79.5 20 79.5 M8 3,217 3,217 402 402120 20 79.5 20 79.5 M8 7,854 7,854 785 785150 25 99.5 25 99.5 M10 19,175 19,175 1,534 1,534
Part No. Weight H57) da L a b h h2 A A2[kg/m] ±0.25 h9 max. –0.3
1.58 18 10 3,000 40 40 5.5 9 73 60
K1
K3
! Coz- ! Coz-
C3
C1
A3
G1
G2
C5 C4 C6
L
K2 B
A1 a h1
h h2 H
da
Q1
Q2
K1
K3
! Coz- ! Coz-
C3
C1
A3
G1
G2
C5 C4 C6
L
K2 B
A1 a h1
h h2 H
da
Q1
Q2
K3
! Coz-
z
yx
da
C6 C4 C5
K1
a
b
h H
K2
L
h2
C3
C1
B
A2
A
A3
K3
! Coz-
z
yx
da
C6 C4 C5
K1
a
b
h H
K2
L
h2
C3
C1
B
A2
A
Can be combined with:
WJ200UM(T)-... WJ200UME-... WJUM-..-ES-FG WJRM-...
Suitable liner materials
iglidur® J iglidur® E7 iglidur® A180
57) Height dimension minus the bearing clearance tolerance
drylin® W profile guides | Product range drylin® W profile guides | Product range
972 973
drylin® stainless
steel
drylin® stainless
steel
3D-CAD files, prices and delivery time www.igus.co.uk/drylinESLifetime calculation, configuration and more www.igus.co.uk/drylinES
drylin® shafts | Product range drylin® shafts | Product range
E W M - 06 - 2000
EWM-0688)
EWM-0888)
EWM-1088)
EWM-12EWM-16EWM-20EWM-25EWM-30EWM-40EWM-50
EEWM-06EEWM-08EEWM-10EEWM-12EEWM-16EEWM-20EEWM-25EEWM-30EEWM-40EEWM-50
EWMR-10EWMS-10EWMR-12EWMR-16EWMR-20EWMS-20EWMR-25EWMR-30
Part No. d Weight Max. length Effective hardness depth[kg/m] (with 1.4125)
06 0.222 3,000 0.808 0.359 4,000 0.910 0.617 4,000 0.912 0.888 6,000 1.016 1.578 6,000 1.220 2.466 6,000 1.625 3.853 6,000 1.830 5.549 6,000 2.040 9.865 6,000 2.250 15.413 6,000 2.4
Part No. d Weight Max. length Effective hardness depth[kg/m] (with 1.4034)
06 0.222 3,000 0.808 0.359 4,000 0.910 0.617 4,000 0.912 0.888 6,000 1.016 1.578 6,000 1.220 2.466 6,000 1.625 3.853 6,000 1.830 5.549 6,000 2.040 9.865 6,000 2.250 15.413 6,000 2.4
Part No. d Weight Max. length[kg/m]
10 0.617 4,00010 0.617 4,00012 0.888 6,00016 1.578 6,00020 2.466 3,00020 2.466 6,00025 3.853 6,00030 5.549 6,000
Materials 1.4125, 1.4034, 1.4301, 1.4571
Completely supported and mounted with standard aluminium support
For unsupported shafts: Partial supports, max. length of 600 mm Standard pitch T2; T1 also possible on request
Hole pitches symmetrical C5 = C6
Stainless steel shafts
Dimensions [mm] – hardened stainless steel 1.4125
Dimensions [mm] – hardened stainless steel 1.4034
Dimensions [mm] – stainless steel 1.4301 (EWMR) or 1.4571 soft stainless steel (EWMS)
88) Material X90 (1.4112)
Size
Order key
Type
Available shaft materials:Stainless steel (1.4125 or 1.4112), hardened/ground EWMStainless steel (1.4034), hardened/ground EEWMStainless steel (1.4301), drawn EWMRStainless steel (1.4571, drawn EWMS
Sha
ft le
ngth
[mm
]
Met
ric
Out
er Ø
Stee
l sha
ft
Order example:EWM-16-500 corresponds to a stainless steel shaft 16 mm Ø 1.4125, 500 mm in length
Options
974 975
drylin® stainless
steel
drylin® stainless
steel
3D-CAD files, prices and delivery time www.igus.co.uk/drylinESLifetime calculation, configuration and more www.igus.co.uk/drylinES
Supported stainless steel shafts Partially supported stainless steel shafts
drylin® shafts | Product range drylin® shafts | Product range
EWUM EWUMN
E W U M - ES - 20 - 2000
EWUM(S)-12EWUM(S)-16EWUM(S)-20EWUM(S)-25EWUM(S)-30EWUM(S)-40
EWUMN-12EWUMN-16EWUMN-20EWUMN-25EWUMN-30EWUMN-40EWUMN-50
EWUM-12EWUM-16EWUM-20EWUM-25EWUM-30EWUM-40EWUM-50
Part No. D B H V d1 E ¯ F G T1 C5/C6 T2 C5/C6h6 ±0.02 for T1 for T2
min. max. Standard min. max.
12 40 22 5 4.5 29 – 5.8 14 75 20 57 120 20 7916 45 26 5 5.5 33 – 7.0 16 100 20 69 150 20 9420 52 32 6 6.6 37 50° 8.3 20 100 20 69 150 20 9425 57 36 6 6.6 42 – 10.8 25 150 20 79 200 20 11930 69 42 7 9.0 51 – 11.0 25 150 20 94 200 20 11940 73 50 8 9.0 55 – 15.0 25 200 20 119 300 20 169
Order key
TC5 C6
G
E
D
V H
B
Ød1
F
(ϒ )
Part No. D B H V N1 N2 d1 M (º) E T187) C5/C6 T2 C5/C6 Weightmin. max. for T2 min. max.
±0.02 ±0.15 for T1 Standard Standard
[kg/m]
12 40 22 5 8.0 5.0 4.5 5.8 50 29 75 20 57 120 20 79 1.7516 45 26 5 9.5 6.0 5.5 7.0 50 33 100 20 69 150 20 94 2.6420 52 32 6 11.0 6.5 6.6 8.3 50 37 100 20 69 150 20 94 3.9725 57 36 6 14.0 8.5 6.6 10.8 50 42 120 20 79 200 20 119 5.6530 69 42 7 17.0 10.5 9.0 11.0 50 51 150 20 94 200 20 119 7.9340 73 50 8 17.0 10.5 9.0 15.0 50 55 200 20 119 300 20 169 12.8850 84 60 9 19.0 12.5 11.0 19.0 46 63 200 20 119 300 20 169 19.60
Part No. d H H1 A A1 A2 d1 d2 T C5/C6 Weight±0.02 ±0.02 min. max. [kg/m]
12 14.5 3 11 5.5 5.4 M4 4.5 75 20 57 1.6216 18 3 14 7.0 7.0 M5 5.5 75 20 57 2.5420 22 3 17 8.5 8.1 M6 6.6 75 20 57 3.8125 26 3 21 10.5 10.3 M8 9.0 75 20 57 5.6230 30 3 23 11.5 11.0 M10 11.0 100 20 69.5 7.6340 39 4 30 15.0 15.0 M12 13.5 100 20 69.5 13.4750 46 5 35 17.5 19.0 M14 15.5 100 20 69.5 20.31
N1 (°) E B
ød1
MD
145°
V
H
N2
C5 T1/T2 C6
N1 (°) E B
ød1
MD
145°
V
H
N2
C5 T1/T2 C6
TC5 C6
G
E
D
V H
B
Ød1
F
(ϒ )Dimensions [mm] – supported stainless steel shafts 1.4125
87) Pitch T1 on request; standard is T2
Dimensions [mm] – low level supported stainless steel shafts 1.4125
Low level supported shafts are delivered unmounted.
Dimensions [mm]
Part
ially
sup
port
ed
stai
nles
s st
eel s
hafts
, m
etric
Type
Shaft support blocks for Ø 20 mm made from stainless steel VA
Connecting dimensions as standard shaft supports in aluminium
Available materials and shafts: 1.4125, max. 6.000 mm EWUM 1.4571, max. 3.000 mm EWUMS
Order example:EWUMN-16-500 corresponds to a low level supported stainless steel shaft (1.4125) 16 mm Ø, 500 mm in length
Order example:EWUM-ES-20-500 for a partially supported stainless steel shaft, Cutting T2 = standard , outer Ø 20 mm with length of 500 mm
Sha
ft le
ngth
[mm
] (h
ole
patt
ern)
OptionsSize
Out
er-Ø
Cutting T2 = standard, T1 on request
976 977
drylin® stainless
steel
drylin® stainless
steel
3D-CAD files, prices and delivery time www.igus.co.uk/drylinESLifetime calculation, configuration and more www.igus.co.uk/drylinES
SHTC-HYD – Hygienic design
SHTC-20-EWM-HYD
SHTC-HYD can be assembled using the following bearing materials:
iglidur® J
Standard up to +90 °C
iglidur® X
For temperatures up to +250 °C and
high chemical resistance
iglidur® A180
For applications with food contact (FDA)
Part No. A Al H E1 E2 I R f It ts d T I2 d2 ha–0.3 –0.3 ±0.15 ±0.15
130 35 48 108 115 108 72 2 36 9.0 20 Tr18x4 26 12 h9 23
Dimensions [mm]
Based on the "hygienic design" idea, this version offers an easily cleaned solution. The screw connections are raised with no dirt traps, and any gaps are intentionally wide. The materials used are plastic and VA stainless steel.
The lead screw unit can be supplied completely with FDA-compliant materials.
Available accessories page 1113
drylin® SHT | Product range | Trapezoidal/high helix thread
SLW-ES-1040SLW-ES-2080
SLW-ES-1040SLW-ES-2080
SLW-ESX-1040SLW-ESA180-1040SLW-ESJ-2080SLW-ESA180-2080
Part No. A AI H E1 E2 E3 l hw f lt tk ts tg–0.3 –0.3 ±0.15 ±0.15 ±0.15 ±0.1
74 100 29 60 60 87 144 24 1.5 22 11 6.8 M8134 150 46 116 116 132 206 44 1.5 28 15 8.6 M10
Part No. kt s sk sg kq d T l2 d2 ha±0.1 Standard
6.4 6.6 9.5 M6 4.4 10 Tr10x2 17 Tr10x292) 14.58.6 9.0 14 M8 5.5 20 Tr18x4 26 12h9 23.0
Dimensions [mm]
92) Lead screw end unmachined
drylin® SLW | Product range | Trapezoidal threadSLW-ES – Stainless steel
Technical data
Stainless steel version with corrosion-resistant steel components (1.4305, 1.4408 or 1.4571)
Choice of bearing material: iglidur® J = Standard iglidur® A180 = FDA iglidur® X = High temperature up to +250 °C
Available accessories page 1113
SHTC - 20 - EWM - HYDSLW - ESJ - 1040
40 mm
20 mm
M4
I + stroke
Flex
ible
Com
pact
TypeType
Hyg
ieni
c D
esig
n
OptionsShaftSize Size
Shaf
t mat
eria
l
Vers
ion
Vers
ion
iglid
ur® J
Sta
inle
ss s
teel
Td
l + stroke
Order key complete page 1080
Order key complete page 1094
Part No. Shafts-Ø Max. stroke length
Weight Additional (per 100 mm)
Max. static load capacity
[mm] [mm] [kg] [kg] axial [N] radial [N]
10 750 1.4 0.2 700 2,800
10 750 1.4 0.2 700 2,80010 750 1.4 0.2 700 2,80020 1,000 5.7 0.64 1,600 6,40020 1,000 5.7 0.64 1,600 6,400
978
drylin® stainless
steel
Lifetime calculation, configuration and more www.igus.co.uk/drylinES
SLW-XY-ESJ-1040
SLW-XY-ESJ-1040
drylin® SLW | Product range | Cross slides
Part No. sg d T l1 d1 d1 l2 d2 d2 ha1 ha2 WStandard Alternative Standard Alternative ha2–
ha1M6 10 Tr10x2 17 Tr10x2 6 h9 17 Tr10x2 6 h9 14.5 33.5 19
SLW-XY-ES – compact XY-table – stainless steel
For manual adjustments Flat and compact High torsional stability stiffness Structure entirely made from VA and V4A stainless steel materials
100 % lubricant free Chemical- and corrosion-resistant Available accessories page 1113
Dimensions [mm]
Dimensions [mm]
The hand wheel can be ordered left- or right-mounted in the y-direction.Left: SHT-XY-ESJ-1040-L-200-300 for 200 mm stroke length on the x-axis and 300 mm on the y-axisRight: SHT-XY-ESJ-1040-R-200-300 for 200 mm stroke length on the x-axis and 300 mm on the y-axis
Part No. Max. stroke length
A Al H E1 E2 Base length
Base length
f lt tk ts tg kt
[mm] –0.3 ±0.15 ±0.15 lx ly ±0.1
300 74 73 48 60 60 117 117 1.5 22 11 6.8 M8 6.4
L R
x
y
L R
x
y
AIA
lx + stroke in mmright
L R
x
y
AIA
ly + stroke in mm
left