DRY LINING & PLASTERING - Bryson Brochure.pdf• Tested to BS5080/1&2. • Eye size 6mm. Code...

1www.bryson.co.uk | 020 8660 9119

DRY LINING & PLASTERING

A COMPLETE RANGE OF DRY LINING & PLASTERING SOLUTIONS FOR FITTING OUT INTERNAL SPACES

www.bryson.co.uk

2 www.bryson.co.uk | 020 8660 9119

DRYWALL ADHESIVE

• Fast curing adhesive foam. • Specially designed to bond drywall, plasterboard, insulation boards and other sheet materials. • Applied using nozzle or applicator gun. • Can be applied horizontally and vertically. • Also fills any gaps on uneven surfaces.

Code Description Unit Qty

08370 750ml 12

EXPANDING FOAM

METAL PLASTERBOARD CORNER TAPE

• For internal and external plasterboard corners. • Eliminates the need for rigid metal corner beads. • Flexible corrosion-resistant twin steel strips. • Fits any angle where traditional corner bead won’t.


08467 50mm x 30m 10

ADHESIVE TAPES

PLASTERERS SCRIM TAPE

• High tack self adhesive reinforced plasters tape. • For joint finishing, crack and hole repairs. • Eliminates the need for pre plastering. • Flexible to prevent bubbling.


08465 50mm x 90m 24

EASI-FILL 60

• Combined setting and air-drying, gypsum-based material. • Bulk filling and finishing of joints. • High coverage rate and minimal drying shrinkage. Easy to mix, apply and sand, with 60 minutes working time. • Second (final) coat can be applied after 140 minutes. • Conforms to EN 13963.


08566 10Kg 1

MORTAR COMPOUNDS

SEALANTS & ADHESIVES

Bryson Now

nowDELIVERY

1 HOUR

On demand materials, delivered at the click

of a button in 1 hour.

Search “Bryson Now”

3www.bryson.co.uk | 020 8660 9119

SCREWS & FIXINGS

BLACK PHOSPHATE FINISH DRYWALL SCREWS

• Specially designed bugle head enables the screw to finish slightly below plasterboard surface. • Hardened steel and very sharp point. • Countersunk Phillips recess.


10601 25mm 1000

10601 25mm 1000

10602 32mm 1000

10603 38mm 1000

10604 42mm 1000

10605 45mm 1000

10606 50mm 1000

10607 60mm 500

10608 65mm 500

10609 75mm 500

DRYWALL SCREWS

BRIGHT ZINC PLATED DRYWALL SCREWS


10621 25mm 1000

10622 32mm 1000

10623 38mm 1000

10624 50mm 1000

10625 42mm 1000

10626 75mm 1000

10627 65 mm 1000

SELF DRILLING - BRIGHT ZINC PLATED

• Jack point for piercing and self tapping into metal studwork up to 2.0mm thick.


10611 25mm 1000

10612 32mm 1000

10613 38mm 1000

10614 42mm 1000

10615 50mm 1000

10616 55mm 500

10617 65mm 500

10618 75mm 500

COLLATED BLACK DRYWALL SCREWS

• To suit autofeed screwdrivers. • 20 strips of 50 per box.


10631 25mm 1000

10632 35mm 1000

10633 45mm 1000

10634 50mm 1000

SPECIALIST SCREWS

SELF DRILLING WAFER HEAD PHILIPS - BZP


10346 8 x 14mm 1000

SELF-TAPPING SCREWS

WIREHANGERS

• Simple and easy to fix anchorage point for suspended ceiling wires. • Zinc plated. • Tested to BS5080/1&2. • Eye size 6mm.


03201 6 x 60mm 100

EXPANSION ANCHORS

4 www.bryson.co.uk | 020 8660 9119

SCREWS & FIXINGS

SPITDRIVA

• Self drills into plasterboard enabling fast installation. • Steel plasterboard fixing for 1 - 12mm plasterboard. • Supplied complete with pan head fixing screw.


02001 37mm 100

CAVITY FIXINGS

SPIT 800P NAILS DISC CARTRIDGES


17841 15mm 500

17842 17mm 500

17843 22mm 500

17844 27mm 500

17845 32mm 500

POWER NAILS

• Suitable for P3700/P200 Spit.


13824 Red, High Strength 100

STRIP CARTRIDGES


13821 Red, Medium/High Strength 100

13822 Black, Extra High Strength 100

POWER NAILS

CARTRIDGE NAILS - METAL WASHERED PINS


13803 3.7 x 27mm 100

13804 3.7 x 32mm 100

13805 3.7 x 37mm 100

13806 3.7 x 42mm 100

13807 3.7 x 47mm 100

13809 3.7 x 62mm 100

13810 3.7 x 72mm 100

13812 3.7 x 97mm 100

CARTRIDGE NAILS - PLASTIC WASHERED PINS


13831 3.8 x 16mm 100

13832 3.8 x 19mm 100

13833 3.8 x 22mm 100

13835 3.8 x 32mm 100

13836 3.8 x 37mm 100

13839 3.8 x 52mm 100

13841 3.8 x 62mm 100

13842 3.8 x 72mm 100

5www.bryson.co.uk | 020 8660 9119

ACCESS PANELS

• Plastic. • High quality low cost solution. • Easily fitted using appropriate adhesive or silicone sealant.


09746 Keylockable Hinged Door, 300 x 300mm

1

099933 Clip Fit Door, 115 x 165mm 1

099935 Removable Hinged Door, 155 x 235mm

1

099936 Hinged Door, 200 x 200mm 1

099937 Hinged Door, 300 x 300mm 1

ACCESS PANELS

BRICKWORK SUNDRIES

SITE LIGHTING & POWER

METAL NON-FR ACCESS PANELS

• Lightweight yet tough. • For applications where plastic access panels/hatches are not suitable and a fire rating is not required. • Hinged, flush door panels with twist lock mechanism.


099944 450 x 450mm 1

099945 600 x 600mm 1

METAL FR ACCESS PANELS

• 1 hour fire rating. • Slim frame. • Fitted insulation and strip to provide draught proofing for a high acoustic performance. • Hinged, flush door panels with twist lock mechanism.


099947 450 x 450mm 1

099948 600 x 600mm 1

METER BOX RECESSED

• Surface mounted, vented. • Unibox gas meter for ground or wall mounting.

Code Unit Qty

099940 1

ACCESS PANELS

LED A-FRAME

• LED 3000 lumens. • 35W. • Opal glare free diffuser. • 120 degree beam angle. • Metal frame. • Plasterers light. • Comes with 5m cable & plug.


15411 110V 1

FLOOR STANDING LIGHTING

6 www.bryson.co.uk | 020 8660 9119

CORDLESS NAIL GUNS

TOOLS

PASLODE SPITFIRE P370

• Robust and reliable powder actuated tool for a wide range of trades, fixing into concrete, steel and masonry. • Automatic piston return provides high rate of fixing. • Easy onsite cleaning and maintenance - no return to service centre required. • Sequential metal disc system prevents unused loads. • Variable power adjustment ensures accurate delivery. • No need to change the piston for different substrates. • Magazine for collated nails enabling faster workflow. • 4 point 360º magazine position. • Supplied with: high impact carry case, single shot adaptor, safety goggles to EN166:B, cleaning cloth, cleaning brushes, push rod, lubricating oil, stabiliser, instruction manual and CE Declaration of Conformity.

Code Unit Qty

17921 1

SPIT PULSA 800P+ CORDLESS NAILER

• Fast and reliable solution for fixing drywall to steel and concrete. • Start & Go technology - tool sleeps after one minute of inactivity, instant Start & Go when activated with any motion. • Reduces battery consumption. • Intelligent fuel injection slide in fuel, locks in place and ejects easily. • Steel O Ring only 4.5kg of push down actuation force needed. • Quick and effortless overhead use. • Exhaust fan cooling system. • Easy servicing with twist and clean rear cap and filter. • Deep track and trunking accessibility. • Supplied with: high impact carry case, battery , all in one charger, safety glasses to EN166:F, allen key, instructions manual, safety instructions and CE Declaration of Conformity.

Code Unit Qty

17781 1

RETRACTABLE KNIFE

• Strong aluminium body. • Heavy duty 0.5mm blade. • Integral blade storage and hanging hole.

Code Unit Qty

16231 1


16341 150mm 1

SAWS, PLIERS & CUTTING

SOFT GRIP JAB SAW

• Tri-cut hardened steel blades. • Extra-sharp teeth and pointed end for piercing plasterboard. • Ideal for fitting sockets and down lights. • Comfortable soft-grip handle.

7www.bryson.co.uk | 020 8660 9119

SERRATED EDGE MASTIC TROWEL

• Manufactured from the highest quality steel. • Well balanced, sturdy yet lightweight. • ABS plastic handle provides a comfortable grip. • Serrated edge 6mm. • For spreading mastic on walls and floors before ceramic tiling.


190840 11 x 4.75”/280 x 120mm 1

PLASTER & DRYLINING

• Pre-worn edges to eliminate line and ripple marks. • High quality tempered carbon steel blade. • Lightweight aluminium shank. • Handle set for perfect balance. • DURAGRIP handle for ultimate comfort.


190016 11 x 4.5”/280 x 115mm 1

190017 13 x 5”/330 x 130mm 1

OX FINISHING TROWEL

TOOLS

• High quality carbon steel • DURAGRIP handle with finger protection. • Heavy duty straight shank.


190115 7.5”/190mm 1

OX PRO BUCKET TROWEL

• Pre-worn edges to eliminate line and ripple marks. • High quality tempered stainless steel blade. • Lightweight aluminium shank. • Fully riveted shank. • DURAGRIP handle for ultimate comfort.


190038 11 x 4.75”/280 x 120mm 1

190039 14 x 4.75”/350 x 120mm 1

OX PRO PLASTERERS TROWEL

• Stainless steel properly shaped & tempered. • Fully riveted shank. • Lightweight, very strong aluminium shank. • DURAGRIP handle for ultimate comfort.


190085 8 x 3”/200 x 75mm 1

OX PRO SMALL TROWEL

• High quality carbon steel. • Flat rectangular blade. • Precision tapered ground blade. • DURAGRIP handle for extreme comfort.


190095 5 x 2”/130 x 50mm 1

OX PRO MARGIN TROWEL

8 www.bryson.co.uk | 020 8660 9119

PLASTER & DRYLINING

• Specifically designed for application of adhesive prior to setting of tiles. • 2 straight edges are ideal for finishing and cutting off. • Made from carbon steel for durability and a long working life. • Soft grip handle for user comfort. • V Notches: 3mm.


08429 11 x 4.5”/280 x 115mm 1

V NOTCH ADHESIVE TROWEL

• Flexible stainless steel blade. • Built-in hammer end. • DURAGRIP soft handle for extreme comfort.


190275 4”/100mm 1

190276 6”/150mm 1

OX PRO JOINT KNIFE

• High quality flexible stainless steel blade. • DURAGRIP soft handle for extreme comfort. • Strong aluminium back.


190286 10”/250mm 1

OX PRO TAPING KNIFE

• Lightweight, sturdy construction. • Non-absorbent pattern face. • For plaster or render.


190327 275 x 109mm 1

190328 350 x 150mm 1

OX PRO PLASTERERS FLOAT

• Lightweight, bevelled at each end. • For cement finishing.


190296 16 x 3.1”/400 x 80mm 1

MARSHALLTOWN MAGNESIUM FLOAT

• High quality tempered aluminium blade. • Sponge rubber blister preventer. • Machined surface of blade to stop mortar from sliding off.


190336 13 x 13”/330 x 330mm 1

OX PRO ALUMINIUM HAWK

TOOLS

9www.bryson.co.uk | 020 8660 9119

• Lightweight sturdy construction. • Moulded polyurethane with smooth surface finish.


190347 13 x 13”/330 x 330mm 1

OX PRO PLASTERERS HAWK

PLASTER & DRYLINING

• Used for removing grease and dirt from workshop, floors and preparation areas. • Designed not to damage tiled flooring or laminates. • Fitted with heavy duty fibreglass handles.


190357 8”/200mm 1

190358 12”/300mm 1

FLOOR SCRAPERS


190369 8 x 2.25”/200 x 60mm 1

190370 12 x 3”/300 x 76mm 1

SCRAPER BLADES

• Lightweight hand sander. • One piece handle clamp holds paper firmly and makes changing easy. • Designed for precut or half sheet of standard sandpaper. • DURASOFT handle.


190382 9.4 x 3.1”/240 x 80mm 1

MARSHALLTOWN 20D HAND SANDER

• Universal swivel joint. • Made of reinforced die-cast aluminium. • Design keeps the entire pad on your work surface. • Positive clamps lock quickly and securely holding sandpaper in place. • Combining this sander with a M/T28 48” pole, permits sanding of ceilings.


190402 9.4 x 3.1”/240 x 80mm 1

MARSHALLTOWN UNIVERSAL SWIVEL POLE SANDER

• Cordless. • Developed for cutting holes in drywalls when setting ceiling lights, air ents etc. • More suitable for straight cuts, compared with general cut-out tools. • Variable speed. • LED job light. • Cutting depth adjustment. • Base cover protects drywall surfaces from scratches and damage. • Excellent manoeuvrability - allows easy over-head operation. • Dust box designed to catch dust in over-head applications. • Connectable to dust extractor.


140014 Body Only 1

MAKITA DSD180Z 18V DRYWALL CUTTER

TOOLS

10 www.bryson.co.uk | 020 8660 9119

PLASTER & DRYLINING

• Stainless steel. • Provides a neat finish plaster/render edge wherever required. • Designed to minimise potential chipping, cracking and associated damage. • Edges, stets, arrises, corners, joints and abutments all easier to form. • Beads simply fixed with plaster dabs or nails. • 65mm wing.


190863 3m 1

PLASTERBOARD STOP BEAD

• Stainless steel. • Helps form a true straight arris. • Designed to prevent chipping & cracking to vulnerable corners. • Edges, stets, arrises, corners, joints and abutments all easier to form. • Beads simply fixed with plaster dabs or nails. • 45mm wing. • Use with 2 coat plaster application. • 13mm plaster depth.


190875 3m 1

ANGLE BEAD

• Designed for use with one coat plaster application onto plasterboard and close-textured backgrounds. • Scalloped edge offers superior key for thin coat plasterwork. • Suitable for 3mm plaster finish. • Designed to minimise potential chipping, cracking and associated damage. • Edges, stets, arrises, corners, joints and abutments all easier to form. • Beads simply fixed with plaster dabs or nails. • 22mm wing.


190885 2.4m 1

190886 3m 1

THINCOAT ANGLE BEAD

• Use with 12.5mm wallboard. • Neat, reinforced clean edge and effective stop bead. • Can be used for capping vertical and horizontal edges of raw plaster board and will not rust. • Protects against moisture seeping in to board and prevents electrolysis.


190917 13mm x 2.5m 1

EDGE BEAD

• Unique design - sharp definition can be given to skim-coat arches and curves. • Designed specifically with enough flexibility to form a 250mm (10”) radius.


190918 2.5m 1

ARCH BEAD SKIM-COAT

TOOLS

11www.bryson.co.uk | 020 8660 9119

• Comfort soft grip wrap around handles. • Also suits floor screed, Artex ctc. • 1300W. • 2 speed variable. • 180-700 rpm. • Supplied with paddle.


140958 110V 1

140959 240V 1

FOX F7860 PLASTER PADDLE MIXER

• Designed to mix sticky and viscous materials. • Tile adhesive, bonding mortar, jointing compound, ready mixed plaster, floor screed and fillers. • Suitable for use with the MIX850 Power Mixer and MIX1400 Power Mixer. • Length 600mm.


140272 140mm 1

VITREX MIXADH140 MIXING PADDLE

• Time and energy saving mixer. • Ideal for stirring drywall mud. • Also suitable for mixing aggregate and other materials. • Will fit into any conventional 3 jaw chuck.


190205 8.5” x 4.5”/215 x 115mm 1

MARSHALLTOWN PLASTERERS QUICK MIX

PLASTER & MORTAR MIXING

• Ideal for use around the garden, home, on the building site, farm or stables. • Lightweight and flexible. • Heavy duty polyethylene. • Super-strong comfortable handles. • Ideal for solids and fluids.


181239 75 Litres 1

18255 42 Litres 1

FLEXI TUBS

• Bonded polythene lined. • No liquid spills or dust penetration. • Ideal for covering polished surfaces. • Will not scratch.


19501 3.7 x 2.7m 1

COTTON TWILL WITH POLY BACKING

• Standard cotton dustsheet. • 1.8kg medium duty.


19504 3.7 x 2.7m 1

19505 7.3m x 910mm 1

SWIFTGUARD COTTON TWILL DUST SHEETS

TOOLS

12 www.bryson.co.uk | 020 8660 9119

C-STUD


22030 2.4m 10

22034 2.7m 10

22040 3m 10

22043 3.6m 10

22048 4.2m 10

48MM


22001 2.4m 10

22035 2.7m 10

22002 3m 10

22044 3.6m 10

22049 4.2m 10

50MM


22031 2.4m 10

22036 2.7m 10

22041 3m 10

22045 3.6m 10

22050 4.2m 10

60MM


22003 2.4m 10

22037 2.7m 10

22004 3m 10

22046 3.6m 10

22051 4.2m 10

70MM


22032 2.4m 10

22038 2.7m 10

22021 3m 10

22047 3.6m 10

22052 4.2m 10

92MM


22033 2.4m 10

22039 2.7m 10

22042 3m 10

22005 3.6m 10

22053 4.2m 10

146MM

STUD, TRACK & MF

• Used as the vertical support in dry lining. • Assorted widths, lengths and thicknesses dependant upon the walls requirements for strength, height, impact resistance and sound insulation.

I-STUD


22054 2.4m 5

22059 2.7m 5

22006 3m 5

22007 3.6m 5

22071 4.2m 5

50MM


22055 2.4m 5

22060 2.7m 5

22064 3m 5

22068 3.6m 5

22072 4.2m 5

60MM


22056 2.4m 5

22061 2.7m 5

22065 3m 5

22008 3.6m 5

22009 4.2m 5

70MM


22057 2.4m 5

22062 2.7m 5

22066 3m 5

22069 3.6m 5

22073 4.2m 5

92MM


22058 2.4m 5

22063 2.7m 5

22067 3m 5

22070 3.6m 5

22074 4.2m 5

146MM

• Acts as vertical supports in dry lining. • Provides greater strength than C-Stud by allowing for increased wall heights, therefore more common in commercial applications.

13www.bryson.co.uk | 020 8660 9119

STUD, TRACK & MF

TRACK

• Used for top or bottom runners and window and door lintels.


22075 50mm x 3m 10

22010 52mm x 3m 10

22076 62mm x 3m 10

22012 72mm x 3m 10

22022 94mm x 3m 10

22014 148mm x 3m 10

25MM SHALLOW TRACK


22077 50mm x 3m 10

22011 52mm x 3m 10

22078 62mm x 3m 10

22013 72mm x 3m 10

22023 94mm x 3m 10

22015 148mm x 3m 10

50MM DEEP TRACK

WALL LINING

• Quick and cheap method of dry lining an existing wall. • Wall liner system is traditionally used to dry line and plasterboard existing brick, block and concrete walls. • Removes the need to prepare the existing wall and creates a void to allow for the easy installation of insulation and the necessary services.


22078 45 x 18mm x 2.4m 10

22079 45 x 18mm x 3m 10

22080 45 x 18mm x 3.6m 10

LINER STUD

14 www.bryson.co.uk | 020 8660 9119

MF5 CEILING FURRING CHANNEL

• Suspended metal frame, which allows for the direct fix of plasterboard sheets to create a smooth and seamless finish. • A lowered plasterboard ceiling allows for services, insulation and utilities to be installed within the resulting void. • Quicker to fit than timber.


22016 3.6m 25

MF CEILING



22017 3.6m 10

MF6 PERIMETER CHANNEL



22018 3.6m 10

MF7 PRIMARY CHANNEL

MF10 WALL FURING



22025 2.8m 20

95.5 X 5.5MM FIXING CHANNEL



22082 2.4m 10

25 X 25MM STEEL ANGLE



22020 3.6m 20

STUD, TRACK & MF

15www.bryson.co.uk | 020 8660 9119

MF9 FURRING CLIPS

• Hook over the primary channel from where they can grip the MF5 Furring Channel into place.

Code Unit Qty

22019 200

ACCESSORIES

SHORT LEG LINER BRACKET

• Leg for creating a void in conjunction with the wall liner/ceiling liner system.

Code Unit Qty

22026 1

Free Nationwide Delivery B4 12

BEFO

RE12NOON

DELIVERY GUARANTE

E

Order by 5:30pm forNext Day Nationwide

Delivery before 12 noon

STUD, TRACK & MF

16 www.bryson.co.uk | 020 8660 9119

DRY LINING & P L A S T E R I N G

A COMPLETE RANGE OF DRY LINING

& PLASTERING SOLUTIONS FOR

FITTING OUT INTERNAL SPACES

TemporaryProtection

Site Set-Up & Safety

PPE & Workwear

Sealants & Adhesives

Tools Site Lighting& Power

Power Tool Accessories

Stud, Track & MF

Screws &Fixings

BrickworkSundries

BROWSE OUR FULL PRODUCT RANGE ONLINE

www.bryson.co.uk020 8660 9119 [email protected]

DRY LINING & PLASTERING - Bryson Brochure.pdf• Tested to BS5080/1&2. • Eye size 6mm. Code...

Documents

Transcript of DRY LINING & PLASTERING - Bryson Brochure.pdf• Tested to BS5080/1&2. • Eye size 6mm. Code...