Drum Lids
1
Drum Lids The ideal protection for the outer lid Einsatz: Hobbocks: Von 5 bis 40 Liter Kunststoff-Weithals-Deckelfässer: Von 30 - 150 Liter Stahlblech-Deckelfässer: Von 200 - 225 Liter Ausführungen: Oben offen, umschlagbar Verschließbar durch Abbinden mittels Clipverschluss Material: Monofolien aus LDPE (antistatisch und leitfähig), HDPE (antistatisch und leitfähig) und Polyamid Coextrusionsfolien (antistatisch und leitfähig) Aluminiumverbundfolien NITTEL Form Lids will protect your drum tops and your product by snapping over the drum rim and giving an extra layer of protection. Form lids are made of both internal and external use to specifically protect the product and drum from contamination. By fitting our Form Lids you will form an effective weatherproof and dirt proof barrier. Our heavy duty design is formed to ‘snap over’ the rim of your tight-head or open top drum, preventing water/contamination ingress. NITTEL GmbH & Co. KG, Kelsterbacher Straße 18, 65479 Raunheim, Germany Telephone: + 49 (0)6142 9467-0, Fax: +49 (0)6142 9467-15, E-Mail: [email protected], URL: www.nittel.eu Applications: for tight head drums for open top drums, especially designed for the lever of the latch ring Material: The Form Lids are made of black PE- LD that also withstands u v light without any detrimental effects. Features: the lid has a ‘clip-on’ effect for a secure fix on top of the drum offers extra product protection, also available for inside the drum lid
description
Drum Lids. The ideal protection for the outer lid. NITTEL Form Lids will protect your drum tops and your product by snapping over the drum rim and giving an extra layer of protection. - PowerPoint PPT Presentation
Transcript of Drum Lids
Drum LidsThe ideal protection for the outer lid
Einsatz: Hobbocks: Von 5 bis 40 Liter Kunststoff-Weithals-Deckelfässer: Von 30 - 150 Liter Stahlblech-Deckelfässer: Von 200 - 225 Liter
Ausführungen: Oben offen, umschlagbar Verschließbar durch Abbinden mittels Clipverschluss
Material: Monofolien aus LDPE (antistatisch und leitfähig), HDPE (antistatisch und leitfähig) und Polyamid Coextrusionsfolien (antistatisch und leitfähig) Aluminiumverbundfolien
NITTEL Form Lids will protect your drum tops and your product by snapping over the drum rim and giving an extra layer of protection. Form lids are made of both internal and external use to specifically protect the product and drum from contamination. By fitting our Form Lids you will form an effective weatherproof and dirt proof barrier. Our heavy duty design is formed to ‘snap over’ the rim of your tight-head or open top drum, preventing water/contamination ingress.
NITTEL GmbH & Co. KG, Kelsterbacher Straße 18, 65479 Raunheim, GermanyTelephone: + 49 (0)6142 9467-0, Fax: +49 (0)6142 9467-15, E-Mail: [email protected], URL: www.nittel.eu
Applications: for tight head drums for open top drums, especially designed for the lever of the latch ring
Applications: for tight head drums for open top drums, especially designed for the lever of the latch ring
Material: The Form Lids are made of black PE-LD that also withstands u v light without any detrimental effects.
Material: The Form Lids are made of black PE-LD that also withstands u v light without any detrimental effects.
Features: the lid has a ‘clip-on’ effect for a secure fix on top
of the drum offers extra product protection, also available for inside the drum lid
Features: the lid has a ‘clip-on’ effect for a secure fix on top
of the drum offers extra product protection, also available for inside the drum lid
