Drop Arm Barrier
-
Upload
shalom-enterprises -
Category
Documents
-
view
26 -
download
3
Transcript of Drop Arm Barrier
SHALOM SECURITY PRODUCTS
Bi-directional optical turnstile with drop barrier
arms. It can be used as a purely optical turnstile or
as a barrier type optical turnstile. Wherein “barrier
mode” the steel barrier arms acts as an additional
visual different to unauthorized access attempts.
Breakaway barrier type is acceptable by all safety
mode regulations.
An access card or other credential is presented to
the customer supplied access control reader
mounted in side the case work. If entry is
authorized, the Traffic Flow Indicator (TFI) will
light as a green arrow pointing in the direction
authorized, the barriers will open, and a chime will
sound indicating to the user that they may pass.
Unauthorized access attempts and tailgates are
singled out by local visual/audible alarms and
access control system event condition.
Shalom’s drop arm barriers are made from
brushed stainless steel, making them an
aesthetically-pleasing security solution. This
explains their popularity in establishments
such as high-end offices, health clubs and
universities. Durable and reliable too, with a choice of
finishes for the arm to suit your specific needs, the
drop arm barrier from Shalom is the best solution
for any area in need of medium levels of security.
Application
Building Sites.
Offices.
Banks.
Exhibition Centres.
Museums.
Administrative Buildings.
Retail Outlets.
Railway Terminals.
Airports, etc.
DROP ARM BARRIER
MODEL: SE DAB-01
Advantages at a glance Low cost
Robust
Reliable
LED directional indicator
User friendly
Compact, small footprint
Easy to install
Easily integrated with any access control system
offering
N/O or N/C volt free contact
Low power consumption
Technical Specifications for Drop Arm Barrier
S NO Parameter Specification
1 Technology Solenoid locking mechanism 2 Type Drop Arm with torque motor
3 Material of construction Body: SS-304 OR Mild Steel powder coated
ARMS: SS recessed into the cabinet
4 Internals Corrosion, abrasion and rust free alloy of high strength
5 Power 230 VAC +/- 10% single phase
6 Frequency 50 Hz.
7 Duty Cycle 100%
8 Power Off Arm lock / Unlock
9 Motor Power Consumption 160 to 180 Watts
10 Operation Bi-directional
11 Passage control Passage to be controlled in one or either direction
12 Dimensions Length: 700mm, Width:300mm, Height:1000mm, Passage
Area : 550mm
13 Locking Mechanism to prevent the turnstile rotating in the opposite
direction once it has travelled 25 degree past the rest position
14 Self cantering mechanism With hydraulic damping to ensure head always rotates
quietly and smoothly to the neutral position
15
Through Put 40 person per minute without access control
15- 20 per Minute with access control
16 Integration (Input) With any access control device like smart card Reader and /
or Finger Print Reader (biometrics based Access Control
System
Input required: Potential free contacts OR 5 Volt Pulse
17 Output (Rotation
Detection Switch)
After 10° OR 45° rotation of rotor
18 Temperature range 5 to 55 degree C
19 Humidity 90% non-condensing
20 Intelligence Built-in logic control
21 Installation Fixed to Concrete Floor by means of Anchor bolts, supplied
with the Turnstile
Shalom Enterprises, Plot No – 412, Mallareddy Nagar, Gajularamaram, Qutubullapur
Mandal, Hyderabad – 500 055, Ph : 040 – 3100 7374 / 3100 7394, email :
[email protected], [email protected],
Web : www.shalomsystems.net
Mumbai Branch:
Mr. Mark Vyas
Cont: 09869083170 E mail: [email protected],
Web : www.shalomsystems.net