Drivetech Catalogue

CATALOGUEEDITION 3

Motospecs is focused on customer satisfaction and providing quality parts to the market. It has a strong portfolio of innovative product brands and prides itself on broad availability of parts coverage for most makes and models, competitive pricing and high order fill.Motospecs prides itself on customer service and technical expertise. Wherever you are in Australia or New Zealand, Drivetech sales and technical support is only a phone call away.

Australia: 1800 463 646 www.drivetech.com.au

New Zealand: 0800 333 125 www.drivetech.org.nz

TECHNICAL SUPPORT

Motospecs recognises the importance of customer confidence and satisfaction in the quality of its products. All Drivetech parts are warranted against defects in workmanship or material for a period of 12 months from the date of sale, unless otherwise stated. Drivetech parts found upon examination by an authorised Motospecs representative to be defective in material or workmanship will be replaced by Motospecs. The cost of returning parts under the warranty must be borne by the customer and must be pre-paid. In order to make a claim under this warranty, the faulty product, proof of purchase and the reason for or details of the failure must be provided to Motospecs.This warranty does not cover damage by misuse or improper installation, or liability for labour charges or consequential loss or damage incurred as a result of the failure of a Drivetech part.

WARRANTY

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss of damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

FOR GOODS PURCHASED IN AUSTRALIA ONLY

© Motospecs www.drivetech.com.au • www.drivetech.org.nz 1

CONTENTS

Motospecs, a division of GPC Asia Pacific ABN 97 097 993 283 is the owner of copyright of this publication, including layout, drawings, photographs, text and part number systems. No part of this catalogue may be reproduced or copied in any form or by any means without the prior written permission of Motospecs. This catalogue has been prepared for the Australian market. Due to vehicle production changes and supersessions, you should ensure that the part you are selecting is suitable for your application.

COPYRIGHT NOTICE

GENERAL WORKSHOPDiagnostics 2

Pullers 2-7

WorkshoP 7-20

SPECIALIST TOOLSBraking 20-22

steering 22-23

DiFFerential 23-25

transMissionaisin Warner aW55-50sn/tr, tF series 25-26

aisin Warner a750, a761, a960 series 27

aisin Warner a40 series 27chrysler 62te, 42rle, 5-45rFe, 68rFe & JF011e 27

Ford 5r55e, n, s, W 28

Ford e40D, 4r100 29

Ford Btr/ion/Dsi M72-97le 29-30

general Motors trimatic/4l30e 30-31

general Motors 4l60e, 65e 31-33

general Motors 5l40e, 6l80e 33-34

getrag 6Dct450/470 35-36

Jatco re0F09a/JF010e 36

Jatco re0F10a/JF011e 37

transMission - continuedJatco Fn4a-el/Fnr5, Ford 4F27e 37

Mercedes 722.0, 100, 200, 300, 400, 500 37-38

Mercedes 722.300, 400, 500 38-39

Mercedes 722.600, 700, 800, 900 39-40

VW 095-01P 40

VW/audi/skoda 01J cVt 40-41

VW/audi/skoda Dsg 02e/0aM 41-42

ZF 5hP18, 19, 24, 30 42

ZF 6hP26 43

transmission general 43-51

transmission Diagnostic 51-52

VEHICLE SPECIfICauDi, skoDa, VolksWagen 52-54

ForD courier/MaZDa BraVo 54

ForD Falcon Ba-Fg territory 54

ForD MonDeo/Focus 55

holDen roDeo/isuZu D-Max 55

MerceDes 55

toyota lanDcruiser 60, 70, 80, 100 series/hilux 56

SPECIALIST TOOLS

© Motospecs

GENERAL WORKSHOPDIAGNOSTICS

Extra Long Pick & Hook Set

• 8pieceset• 230mmlong• Softgriphandles• Suppliedinpouchcase

Part Number: UXT-10331

PULLERS

Self Centring Puller - Screw Type

• Adjustable• Multifit• Usedforon-carFWDhubbearingremovalandinstall• Comeswith2sizecones


Harness Diagnostic Pin Out Set

• Variousterminalsandpatchleadsforeaseofdiagnostics• LEDtestrig• Variableresisterterminal• Variousprobes• Multiplesizeroundandflatterminals• Flatalligatorclamps


Terminal Pin Removal Kit

• Usedtoeasilyremovewiringterminalsfromhousings• Colourcodedforeasyidentification• 5piecekit• Suppliedinablowmouldedstoragecase


2

© Motospecs www.drivetech.com.au • www.drivetech.org.nz

GENERAL WORKSHOPPULLERS

Thin Jaw - Screw Type

• Ultrathinjawsfortightapplications• 100mmdepth• 40mmto90mmoutsidereach


Puller Universal Screw Type

• 6slottype• Includes2setsofattachingbolts• Allsteelconstruction


Universal Pulley Holding Kit

• Designedtoholdthecrankshaftpulleystationarywhilelooseningandtighteningthecentreshaftbolt

• Includespullertoremoverflange/pulley• Lockingscrew:M6,M8


Blind Hole Kit

• Forremovalofbearingsandconesutilisingcentrehole• Comeswithbothslidehammerand2leggedscrewtype• Threadedrodends• Suppliedinablowmouldedstoragecase• 8mmto55mminsidediameter


3

© Motospecs


Screw Type Transmission Bearing Puller

• Removesinput,mainandcounter-shaftbearingsviacirclipgrooves• Specialclampholdspullerlegssecurelyintocirclipgrooves• 75to170mmspread• 380mmreach• Suppliedinablowmouldedstoragecase


Universal Puller Set

• 2pullerset-shortandlongwithextendablelegs• Shortset:60to150mmspread.Longset:130to230mmspread• Legs:72mmwith22mmextensions• Bolt:105mm,with15/30/55mmextensions• Suppliedinablowmouldedstoragecase


Hydraulic - 8 Tonne Bearing Separator Type

• Self-containedpumpandpullerbody• Withintegralsafetyvalve• Easyreleasevalve• 270mmreach,220mmspread


Bearing Splitter

• 4mmto35mmspread• Sturdysteelconstruction


4



Bearing Splitter



Bearing Splitter



Bearing Splitter



Bearing Splitter



5

© Motospecs


Screw Type T-Handle Lock - 5 Tonne Capacity

• Bearingcirclipgrooveandgeararmsets• Flatramadapter• 100mmreach• 13mmto130mmspread

Part Number: 104T/S

Standard Puller JawsPart Number: 10454

Transmission Puller JawsPart Number: 10454T

Hydraulic Type T-Handle Lock

• 12tonnesofpullingforce• Easyhydraulicleveraction• 83mmramstroke• 203mmreach,317mmspread• 3ramextendersincluded-48mmand2x74mmlengths

Part Number: PHS-108

PHS-108 Jaw Upgrade Kit - 2 Complete Sets

• 250mmlongreachjaws,381mmspread• 406mmlongreachjaws,571mmspread

Part Number: PHS-1

Screw Type T-Handle Lock - 3 Jaw Internal Puller

• 80mmlongstandardjaws: 15mmto100mmspread• 170mmlongextensionjaws: 25mmto127mmspread

Part Number: PM16

Standard Length Replacement JawsPart Number: 10554

6


Screw Type T-Handle Lock - 3 Jaw Bearing Circlip Type

• 133mmreach• 25mmto170mmspread

Part Number: TJ-2

Standard JawsPart Number: 10654

Replacement JawsPart Number: 10654T


Screw Type T-Handle Lock - 2 Jaw Bearing Circlip Type

• 235mmreach• 70mmto375mmspread

Part Number: TJ-1

Replacement JawsPart Number: 11054T

400mm Extended JawsPart Number: 11054L

Bolt Extender 38mmPart Number: X10

Standard JawsPart Number: 11054

80 Litre Oil Catcher

• 80litrecapacity• Includesfixedairregulator,foreaseofdraining• 380mmcollectionbowl• Telescopebowl(1140mmto1580mm)• Lockable3inchwheelcastors• Largehandleforeaseofmanoeuvring• Largerubbermouldtoprotectvehiclefromscratching• Comeswithadditional550mmdrainpan• Measurements:470mm(W)1140mm(MINH)1580mm(MAXH)• Fillcapacity:80Litresweight;36Kilos(empty)


WORKSHOP

7

© Motospecs

GENERAL WORKSHOPWORKSHOP

Oil Dispenser

• Fillsandextractsfluids• Pneumaticregulatedwithsafetycut-outvalve• Bottlemountedgauge• Idealfornonfillertubefittedtransmissions• 6litrecapacity


Reservoir Tank

• SeparatetankforUXT-10040


Transmission Filling Kit 7.5L

• Manualleveroperated• Separatefillingcaponthereservoir• Outputcapacity:700cc/cycle• 8pieceadapterfillingkitincluded• Suitablefor:Audi,Ford,Mercedes722.9,NewMini,Porsche,

Seat,Skoda,VWanduniversalapplications


Vacuum & Pressure Test Kit

• Assortedattachments• Switchablebetweenpressureandvacuum• Pressurerange: Positivepressure:0~60psi(1~4inhg) Negativepressure:0~-30psi(0~-1inhg)• Suppliedinablowmouldedstoragecase


8



Magnetic Vice Guards

• Fitsallvices• Aluminiumconstruction• Weightholdingcapacity: 2.4kgvertically 1.3kghorizontally

Part Number: HE-3

Clamp

• Bonnetstrutretainer• Screwtype• Smallyetstrong• Largeknobforeaseofuse


Spring Clamp Remover

• Forthesaferemovaloffuel,oilandwaterhosespringclamps• 600mmcablelengthtoreachhardtoaccessclamps• Canbelockedintoposition


Light

• LEDtype• Pushbuttononbase• 300mmflexibleshaft


9

© Motospecs

Stand

• Strongsteelconstruction• 750kgcapacity• 1400mmto2065mmheightrange• 305mmbasediameter


Transmission Jack

• Twostagetelescopic• 500kgsmaxload• 865mmbaseheight• 1820mmmaxheight• TiltandslidescrewadjustmentonTransmissionplatform


Suspension Arm Lever

• Universaldesign• 6wayadjustable• Safelyhooksontocontrolarms• Machinednon-slipgriphandle• Willdisassembleforeaseofstorage• Allsteelconstruction• 1000mmlength,30mmdiameter


CV Shaft Remover

• UsetoremoveCVShaftsfromtransmissions• Slidehammerdesign• 48mmopenfork



10



Drift Punch Set

• 8pieceset• Machinednon-slipgriphandle• Suppliedinwrappouch• Allsteelconstruction• Sizesinclude: 1.6mm,2.3mm,3.2mm,4.0mm,4.8mm,5.5mm,6.4mm&8.0mm


Tensioner Retaining Set

• Manufacturedfromhighqualityspringsteel• Usedtolocktimingbeltorchaintensioners• 6sizes:0.8to1.92mm• Retainedonsnapkeyring


Universal Flywheel Holder

• Allmetalconstruction• Adjustablemountingbolt• Allowstorquingofretainingbolts


Dual Mass Flywheel Wear Kit

• Designedtotestaxialplayandfreeplayangle• Dialgaugeincluded• Steelconstruction• Suppliedinablowmouldedstoragecase


11

© Motospecs

Clutch Alignment Set

• 15pieceset• Includes10fixedpilotadaptors:10mm,12mm,14mm,15mm,

16mm,17mm,19mm,25mm,27mm• Threadedspindleguides:55mm,100mm,155mm• Suitableformostmanualtransmissionswithsingleclutchdiscs,and

somedoublediscapplications• Suppliedinablowmouldedstoragecase


Stabiliser Bar Engine

• Fullyadjustablewidth• Twinhookwithchainsupplied• Rubberbasesonfeet• Measurements:1500mm(W)x270mm(H)


Stabilising Bar Engine Tri Brace

• 1830mmmainsupport,50mmsquaretube• 845mmforwardsupport,40mmadjustablesquaretube• Removablesupportingplateswithrubberpads• Twoforgedhooksandsupportchains• Forusewithheavilyforwardslantedenginebays• Preventsstabiliserbarrollover


Stabiliser Bar Engine - VW T5

• Application:VWTransporterT52004-on,andotherapplications

• Usedforsupportingengineduringremovalandinstallationofgearbox

• Measurements:578mm(L)x1830mm(W)x145mm(H)• Includes2chainsand2hooks



12



Guard Cover

• Tough1.2mmthickPVC• Measurements:870mm(W)x570mm(H)


Magnetic Tray

• Rectangularmagnetictrayholdsmetalpartsandsmalltools• Two85mmdiametermagnetsthatarerubbercoatedto

preventscratching• Measurements:240mm(L)x140mm(W)x45mm(H)


3 Magnet Storage Tray

• Rectangularmagnetictrayholdsmetalpartsandsmalltools• Three80mmdiametermagnetsthatarerubbercoatedto

preventscratching• Measurements:365mm(L)x165mm(W)x40mm(H)


Crows Foot Set

• 15pieceset• 8mmto19mm3⁄8”drive• 21mm,22mmand24mm1⁄2”drive• Suppliedinablowmouldedstoragecase


13

© Motospecs

Metric Pipe Spanners

• Uniquewraptypedesign• OEMdesign• Sizes:8mm&9mm,10mm&11mm,12mm&13mm,14mm&15mm• 4Spannerswithwrappouch


Imperial Pipe Spanners

• Uniquewraptypedesign• OEMdesign• Sizes:5⁄16”&3⁄8”,7⁄16”&1⁄2”,9⁄16”&5⁄8”,11⁄16”&3⁄4”• 4spannerswithwrappouch


Drain Plug Socket Set


Thin Wall, Deep Impact Wheel Socket Set - 3 Piece

• Plasticsleevesprotectaluminiumwheelsfromdamage• Heattreatedchamferedendsmakethesocketseasilyattachtothenuts• Non-slipdesignenforcestheadhesionbetweenthenutsandsocket• Colourcodedforeaseofidentification



• 15pieceset• ForusewithEuropean,AmericanandJapanesespecialisedvehicles• ½”drive‘T’barincluded• Sizes:8mm,9mm,9.5mm,10mm,12mm,14mm,17mmmaleHEXdrive 8mm,9.5mm,11mm,12mm,13mmmalesquaredrive 10mmfemalesquaredrive 3⁄8”maletriangulateddrive

14



Socket Set Star-E 9 Piece

• 1⁄2”drive• Sizes:E10,E11,E12,E14,E16,E18,E20,E22,E24• Suppliedinablowmouldedstoragecase


Torx Extractor Set

• SpecificallydesignedforHex,Torx,TorxPlus,MortorqandSecurityTorx• 8pieceset• Sizes:3,4,5,6,7,8,10and12mm• 10mm,12mmand14mmdrive• Suppliedinablowmouldedstoragecase


Multi-Spline Socket Set

• 26piece,1⁄2”drive• 8x55mmlength:M5,M6,M8,M9,M10,M12,M14,M16• 7x100mmlength:M5,M6,M8,M9,M10,M12,M14• 7x140mmlength:M5,M6,M8,M9,M10,M12,M14• 4x200mmlength:M8,M10,M12,M14• Suppliedinablowmouldedstoragecase


Hex-Bit Socket Set

• 30piece,1⁄2”drive• 9x55mmlength:5,6,7,8,10,12,14,17,19mm• 8x100mmlength:5,6,7,8,10,11,12,13mm• 7x140mmlength:5,6,7,8,10,12,14mm• 6x200mmlength:5,6,7,8,10,12mm• Suppliedinablowmouldedstoragecase


15

© Motospecs

TX-Star Socket Set

• 32piece,1⁄2”drive• 10x55mmlength:T20,T25,T27,T30,T40,T45,T50,T55,T60,T70• 10x100mmlength:T20,T25,T27,T30,T40,T45,T50,T55,T60,T70• 6x140mmlength:T40,T45,T50,T55,T60,T70• 6x200mmlength:T40,T45,T50,T55,T60,T70• Suppliedinablowmouldedstoragecase


Ribe Bit Socket Set

• 32piece,1⁄2”drive• 9x55mmlength:M5,M6,M7,M8,M9,M10,M12,M13,M14• 9x100mmlength:M5,M6,M7,M8,M9,M10,M12,M13,M14• 7x140mmlength:M8,M9,M10,M12,M13,M14• 7x200mmlength:M8,M9,M10,M12,M13,M14• Suppliedinablowmouldedstoragecase


Hub Nut Socket Set

• Includes30mm,32mm,34mm,35mmand36mmsockets• 1⁄2”drivesockets• Usedfordriveshaftnubnuts• 75mmlong


Spark Plug Socket Set

• Ratchetfeatureshingedhandlewithballjoint-3⁄8”drive• 2x90mmlongsockets-14mmand16mm• 2x250mmlongsockets-14mmand16mm• SuitableforEuropeanandJapanesevehicles



16



Glow Plug Socket Set

• 5pieceset• 1⁄4”drivewithUniversalJoint• 12pointSocket,Multi-Hex,70mmlength• Sizes:8mm,9mm,10mm,12mm,14mm• Suppliedinablowmouldedstoragecase


Temperature Pick Up Infrared

• Handheld,batteryoperated• Widetemperaturereadingrange• BacklitLEDdisplay


Digital Torque Wrench 1⁄4” Drive

• Inbuiltmemorywillholdupto50torquesettings• Measures6-30Nm• Accuracy±4%• Autoshutoff80seconds• Suppliedinablowmouldedstoragecase


Cooling System Pressure Tester & Vacuum Fill Kit

• 28piececomprehensiveset• Forcoolingsystempressuretestandrefillingnewcoolant

bycreatingvacuuminthecoolingsystem• SuitableforAmerican,Australian,European,Japanese

andKoreanvehicles• Suppliedinablowmouldedstoragecase


17

© Motospecs

Cooler Line Disconnect Tool

• Smallandeasytouseinconfinedplaces• SuitableforbothPowerSteeringandTransmissionoilcoolerlines• BMW3-Series,X3,X5andLandrover1999-on

Part Number: ZXT-619000

Straight Edge

• 52cmlong• Convenienthangingholeandedgeprotector• Usewithfeelergaugestocheckfordistortionintransmissionvalve

bodies,pumps,casesandothercomponents• Suitableforusewithengineblocks,cylinderheadandflywheels


5 Piece Trim Removal Set

• Usedtoremovedoorpanels,fasciaandtrimstrips,dashboard,interiorpanels,trimandwindowmouldings

• Madefromimpactresistantplastic• Slimdesignfordelicatework• Includes:plasticwedge,dismountinglever,combinedclipreleasetool,

clipremoverandtrimseparator


Scraper Set 3 Piece

• Stainlesssteelblades• Timberhandles• Housedinprotectivepouch



18



Scraper Set 4 Piece

• Metalblades• Largeergonomichandles• 2narrowand2wideblades• 2longand2shortshanks• Suppliedinablowmouldedstoragecase


Spring Compressor - Screw Type

• Canbeusedonoroffcar• Specificallydesignedforconicaltypespringsthathave

differentspringdiameterstoptobottom• Allmetalconstruction


Portable Mini Hand Press

• Usedfor“oncarremoval”ofbushesandballjoints• 7pieceset• Suitableforalargerangeoftopandbottomballjoints• Specialadaptersfor“V”SeriesCommodorerearsuspensionbushesincluded• Allsteelconstruction• MadeinAustralia

Part Number: GGT-400

Axle Bearing Press Tool

• Forthesaferemovalofrearaxlebearings• Vehiclessuitedfor:FordCourier,HoldenRodeo-2and4WD,Mazda

Bravo,MitsubishiL300,Triton-2and4WD,NissanNavara-2and4WD,ToyotaHiace,Hilux-2and4WD,Suzuki

• Canbeusedwithsplitterbearingplates• MadeinAustralia


19

© Motospecs


Axle Bearing Press Tool

• Forthesaferemovalofaxlebearings• Vehiclessuitedfor:HoldenFrontera,Jackaroo,Nissan

Patrol(6stud),ToyotaPradoandLandcruiser• Canbeusedwithsplitterplates• MadeinAustralia


SPECIALIST TOOLSBRAKING

Brake Caliper Wind Back Kit - 21 Pieces

• SuitsmostEuropean,Japanese,KoreanandUSvehicles• Includesleftandrighthandhelixbolts• T-barhandledesign• Alsoabletouse3⁄8”driveratchetwhenmoretorqueisrequired• Includetoolsforfrontandrearpistons


Universal Hydraulic Flaring Tool• Kitincludesvarioussizesofdiesandadapterstoworkonflaring

tubetransmission,brakeandairconditioninglines• Push-Connect:1⁄4”,5⁄16”,3⁄8”• Fuelline:5⁄16”,3⁄8”• Single/doubleflare:3⁄16”,1⁄4”,5⁄16”,3⁄8”,1⁄2”• Metricflare:4.75mm,6mm,8mm,10mm• Suppliedinablowmouldedstoragecase


Universal Flaring Tool

• Kitincludesvarioussizesofdiesandadapterstoworkonflaringtubetransmission,brakeandairconditioninglines

• Includes5adapters:3⁄16”,1⁄4”,5⁄16”,3⁄8”,&1⁄2”• Designedfordoubleorsingleflareincopper,aluminium,brassand

softsteelfluidlines• Suppliedinablowmouldedstoragecase


20



Brake Caliper Piston Wind Back Tool

• 70mmwidepaddlesdesignedforquadpistolcaliper• 15mmto75mmspread• Allsteelconstruction• Internalrollerbearingforsmoothoperation


Pneumatic Brake Fluid Extractor/Bleeder - 2 Litre

• Collectsoldbrakefluidwithoutspillage• Fastandeasytouse• Versatiledesign• HandlesmostABSandstandardsystems• Integratedsilencerforaquieterworkingenvironment• Siliconsuctionhoseswithuniversalrubberfittings


Brake Fluid Filler

• Usedtofillbrakefluidreservoireasily• Gravityfeddesign,withhighqualitybrasstapandfixtures• Locksontobrakefluidreservoir


Pipe Bender

• Adjustablefor3⁄16’’,1⁄4”,5⁄16”&3⁄8”pipediameters• Handoperatedorvicemounted• Suitableforcopper,kunifer,steelorbrasstubing• Willproducebendsfrom3⁄4”(19mm)to11⁄4”(32mm)• Housedinprotectivepouch


21

© Motospecs


Fluid Line Stopper 2 Piece Set

• Usedonfluidlinestostopflowafterdisconnection• Suitableforuseonflexiandsolidfluidlines• Suits3⁄8”,5⁄16”,1⁄2”pipeendsandbanjotype• Springloaded• Packof2


Fluid End Line Stopper

• Idealforsealingmetalflaredbrake,transmissioncoolingandfuelpipes• Screwtype• Suitspipesize4mm-10mm


Master Line Disconnect Kit

• Suitableformostfuel,transmissioncoolerandairconditioningapplications

• 28pieceset• Aluminiumandhardenedplasticconstruction• Suppliedinablowmouldedstoragecase


SPECIALIST TOOLSSTEERING

Rack and Pinion Tie Rod Tool

• Removesandrefitstierodends• ½”drive• Handyforhardtoreachrackends• 27mmto42mmrange

Part Number: GXT-10000

22


SPECIALIST TOOLSSTEERING

Rack Boot Installation Tool

• Installsmostrubbersteeringrackbootswithoutremovingthetierodend• Eliminatestheneedforalignment

Part Number: GXT-10010

SPECIALIST TOOLSDIffERENTIAL

Bearing Cup Remover - BTR IRS Carrier Bearings

• Presstoolforremovingthecarrierbearingcupsonthescrewadjustablecaps

• Allmetalconstruction• MadeinAustralia

Part Number: 0555-361682

Dana I.R.S. Screw Adjuster Tool

• ForeasysettingofcarrierbearingscrewadjustersinDanaSpicer,Model78/80/86independentrearsuspensiondifferentials

• Sturdysteelconstruction,forusewith½”squaredrivetools• MadeinAustralia


23

Ford IRS Differential Mounts and Installation Tool

• SuitablefortheremovalandinstallationofForddifferentialsupportbushes

-BA-FGFordFalcon(rear) -FordTerritories(frontandrear)• MadeinAustralia


© Motospecs


Pinion Holding Tool - 2 Bolt

• ½”drive,steelconstruction• Usedtosecurethepinionflangetoenablenutremoval• 248mmlong• 47mmdiametercentralhole• 7mmwide,60mmlongmountingslots• MadeinAustralia


Pinion Holding Tool - Trilobe

• ½”drive,steelconstruction• Usedtosecurethepinionflangetoenablenutremoval• 180mmlong• 47mmdiametercentralhole• 3x7mmwide,35mmlongmountingslots• MadeinAustralia


Pinion Flange Puller

• Non-impactscrewtype• ForusewithPinionHoldingTools0555-361694and0555-361700• Fitssecurelyintocentralholeofpullers• Machinedtabstoallowholdingofpuller• MadeinAustralia


Shim Driver

• Usedfordrivingcarrierpreloadshimswithprecision• Allsteelconstruction• 5sizeset• MadeinUSA

Part Number: YTSD-01

24



Housing Spreader - Dana 30, 44, 60, 61, 70, 80

• Usedtospreadhousingforeasyfitmentofcarrierpreloadshims

• Lesschanceofbreakingshims• MadeinUSA

Part Number: YTS-01

SPECIALIST TOOLSTRANSMISSIONAisin Warner AW55-50SN / TR, Tf Series

Template - SLT, SLU, SLS on Car Adjustment• Usedtodrillholesinsidecovertobeabletoadjustsolenoidsincar• 3rivetssuppliedPart Number: AXT-550020

3 Pack of RivetsPart Number: AXT-55002530 Pack of RivetsPart Number: AXT-550026

Solenoid Repair Kit - AW55-50SN / TR/TF Series

• AllowsforthecompleteoverhauloftheAisin5and6speedSLsolenoids

Part Number: AXT-550000

50 Piece Bush Kit with ReamerPart Number: ABK-550030

Replacement ReamerPart Number: AXT-550030

SL Solenoid Repair Kit• AllowsforcompleteoverhaulofAisin5and6speedlargecanisterSLsolenoids• CanbeusedwithendcappedcanistersPart Number: AXT-55001050 Piece Bush Kit with ReamerPart Number: ABK-550030Replacement ReamerPart Number: AXT-550030

25

© Motospecs

SPECIALIST TOOLSTRANSMISSIONAisin Warner AW55-50SN / TR, Tf Series

SL Solenoid Bush Installation Aid

• Holdsandcentresbushwhilstpressingintosolenoidbody• Suitableforbothlargeandsmallcanistertypes


Rear Bush Case Repair TF60SN - TF Series / 09G, M, K

• UsedtoreplacetheC2supportbushintherearcasehousing• Comeswiththreereplacementbushes• MadeinAustralia


Oversize BushesPart Number: AB-650000

Servo Bore Tool - AW55-50 Series

• RepairsServoPinBores• Allowsreuseoftransmissioncase• Includes3oversizeServoBoreSleeves• Suits:AW55-50Series

Additional Sleeves Part Number: AB-550045

Servo Bore Tool - TF80-81SC

• RepairsServoPinBores• Allowsreuseoftransmissioncase• Includes3oversizeServoBoreSleeves• Suits:AWTF80/81SC

Additional sleevesPart Number: AB-600000



26


SPECIALIST TOOLSTRANSMISSIONAisin Warner A750, A761, A960 Series

Spring Compressor - A750, A760, A761, A960 Series

• Forcompressing1st/revspringsubassemblytoremovecirclip• Boltincase• ToyotaandLexusapplication


4 Tooth Attachment - A750, A760, A761, A960 Series• Adjustablelegs• TobeusedwithAXT-750010


Aisin Warner A40 Series

Pump Alignment Strap - A40 Series

• Usedtoalignpumphalves• Stainlesssteelconstruction• MadeinAustralia


Chrysler 62TE, 42RLE, 5-45RfE, 68RfE & Jf011E

Chrysler Dip Stick

• UsedtodetermineTransmissionFluidlevel• Suits62TE,42RLE,5-45RFE,68RFE&JF011E• Flexibleshank• Metalhandle

Part Number: TXT-62000

27

© Motospecs

SPECIALIST TOOLSTRANSMISSIONford 5R55E, N, S, W

Pump Alignment - 5R55E

• Allmetalconstructionusedtotestforcorrectpumpalignmentafterassembly

• MadeinAustralia

Part Number: FXT-35200

Servo Bore Tool Kit - 5R55E

• Allowsre-sleevingofwornservopinbore,restoringcircuitintegrity• Includesguides,reamers,driftsand3bushsleeves

Individual Bush Sleeves Part Number: FB-36005

Servo Bore Tool Kit - 5R55N, S, W


Individual Bush SleevesOverdrive - Part Number: FB-36100Intermediate - Part Number: FB-36105

Pump Bush / Align - 5R55E, N, S, W

• Allmetalconstruction• 2pieceset• Usedtotestforcorrectpumpalignmentafterassemblyand

forcorrectlyinstallingthepumpbush• MadeinAustralia




28


SPECIALIST TOOLSTRANSMISSIONford E40D, 4R100

Pump Alignment Strap - E40D / 4R100



ford BTR / ION / DSI M72-97LE

Pin Removal / Installer - BTR / ION / DSI M72-97LE

• Foruseonexternalselectorshaftpin• Allsteelconstruction• MadeinAustralia

Part Number: RXT-93300

Pin Removal / Installer - BTR / ION / DSI M72-97LE

• Foruseoninternalselectorshaftpin• Allsteelconstruction• MadeinAustralia


Replacement Pins - BTR / ION / DSI M72-97LE

• ForRXT-93300andRXT-93310• Allsteelconstruction• MadeinAustralia


29

© Motospecs

SPECIALIST TOOLSTRANSMISSIONford BTR / ION / DSI M72-97LE

Bush Removal / Refit - BTR / ION / DSI M72-97LE

• Changeextensionhousingbushwithoutremovinghousingfromtransmission

• Allsteelconstruction• MadeinAustralia


General Motors Trimatic / 4L30E

Overdrive Removal and Rebuild Kit - GM 4L30E

• Servoextractingtool• Springcompressor• Pistoninstallingsleeve• Alignmentpins

Part Number: JXT-54010

Selector Seal Tool - Short Shaft

• Removesandinstallsselectorseals• Shortshafttransmissions• Suitstransmissions:GMTH180,TH350,TH400,TH700,4L30E,

4L60/E-1995,Powerglide


Selector Seal Tool - Long Shaft

• Removesandinstallsselectorseals• Longshafttransmissions• Suitstransmissions:GMTH180,TH350,TH400,TH700,4L30E,

4L60/E,Powerglide


30


SPECIALIST TOOLSTRANSMISSIONGeneral Motors Trimatic / 4L30E

FWD / Coast Piston Inner Sleeves - GM 4L60E, 65E

• 2pieceset• Precisionmachinedforclosetolerances• Allsteelconstruction• MadeinAustralia


Pump Alignment Strap - GM TH700-R4 / 4L60E, 65E



Pump Gear Aligning Sleeve - Trimatic / 4L30E

• Centresthepumpgears• Durablemetalconstruction


General Motors 4L60E, 65E

Reverse Input Sleeve Kit - GM 4L60E, 65E

• 2pieceset• Precisionmachinedforclosetolerances• Allsteelconstruction• MadeinAustralia


31

© Motospecs

Sealing Ring Resizer - GM TH700-R4 / 4L60E, 65E

• Makesthe4inputshaftTeflonringstheperfectsizeforeasyinstallation

• MadeinAustralia


SPECIALIST TOOLSTRANSMISSIONGeneral Motors 4L60E, 65E

Torx Plus Driver Bit

• Forremoving1stdesignbellhousingtocasebolts• TorxplusT-50+design

Part Number: 77000-HBK

Mortorq Driver Bit

• Forremoving2nddesignbellhousingtocasebolts• Mortorqdesign


Torx Extractor Set

• SpecificallydesignedforHex,Torx,TorxPlus,MortorqandSecurityTorx• 8pieceset• Sizes:3mm,4mm,5mm,6mm,7mm,8mm,10mm&12mm• 10mm,12mm&14mmdrive• Suppliedinablowmouldedstoragecase


32


SPECIALIST TOOLSTRANSMISSIONGeneral Motors 4L60E, 65E

Cooler Line Disconnector

• Allowseasyremovaloftransmissioncoolerlines• Speciallydesignedtoworkintightplaces• SuitableforGMvehicles


General Motors 5L40E, 6L80E

Cooler Pipe Removal Pliers - GM 5L40E, 6L80E

• Quickandeasyonehandedoperation• BMW3-Series,X3,X5andLandRover1999-on


Tool Kit Sleeves - GM 5L40E


• Includesbothpistoninstallationsleevesandringresizers• Precisionmachinedsteelconstruction• Housedinsturdysteelcarrychest• 11pieceset

Cooler Line Disconnect Tool


• Smallandeasytouseinconfinedplaces• SuitableforbothPowerSteeringandTransmissionoilcoolerlines• BMW3-Series,X3,X5andLandRover1999-on

33

© Motospecs

SPECIALIST TOOLSTRANSMISSIONGeneral Motors 5L40E, 6L80E

Circlip Pliers - GM 5L40E, 6L80E

• Forremovaloflargecentresupportretainingcirclip• Lockingmechanismincorporatedforuserssafety• Length:650mm• MadeinAustralia


Brake Kit - GM5L40E, 6L80E

• RetrofitkitforJXT-608000• Completewithtemplateandallfittingaccessories• MadeinAustralia


Replacement Tips - GM 5L40E, 6L80E


• ForJXT-608000andJXT-608010• MadeinAustralia

Bush Driver Set - GM 5L40E

• 10pieceset• Allmetalconstruction• Finishestoexactfactorydepth• MadeinAustralia


34


SPECIALIST TOOLSTRANSMISSIONGetrag 6DCT450/470

Dual Mass Flywheel Wear Kit - Getrag 6DCT450/470



Clutch Aligning Tool - Getrag 6DCT450

• Alignsclutchtothedualmassflywheeldogteeth• Forreinstallingtransmissiontovehicle• OEMdesign• Suits:6DCT450modelsonly

Part Number: PXT-645000

Clutch Remove & Refit Tool - Getrag 6DCT450/470

• Loosensandtightensclutchdrumretainingnut• Lockingarmsallowsremovalofclutchdrum• OEMdesign• Suits:6DCT450/470models


Front Seal Cover Installer (Outer) - Getrag 6DCT450/470

• Appliesevenpressuretoinstallfrontcoversealwithoutdamage• Usedinconjunctionwith: -InnerInstallerToolPXT-645015(for6DCT450) -InnerInstallerToolsPXT-647000andPXT-647005(for6DCT470)• OEMdesign• Suits:6DCT450/470models


35

© Motospecs

SPECIALIST TOOLSTRANSMISSIONGetrag 6DCT450/470

Front Seal Cover Installer (Inner) - Getrag 6DCT450

• Guidesinnersealovercentralhub• UsedinconjunctionwithOuterSealInstallerToolPXT-645010• OEMdesign• Suits:6DCT450modelsonly



• Guidesinnersealovercentralhub• Usedinconjunctionwith -InnerSealInstallerToolPXT-647005 -OuterSealInstallerToolPXT-645010• OEMdesign• Suits:6DCT470modelsonly



• Guidesinnersealovercentralhub• Usedinconjunctionwith: -InnerSealInstallerToolPXT-647000 -OuterSealInstallerToolPXT-645010• OEMdesign• Suits:6DCT470modelsonly


Jatco RE0f09A/Jf010E

CVT Puller Tool - RE0F09A/JF010E

• AsfittedtotheNissanMurano• Easilyclampsandholdsforpushbeltremoval• Allsteelconstruction• MadeinAustralia

Part Number: NXT-11000

36


SPECIALIST TOOLSTRANSMISSIONJatco RE0f10A/Jf011E

CVT Puller Tool

• Easilyclampsandholdsforpushbeltremoval• Allsteelconstruction• MadeinAustralia


Jatco fN4A-EL/fNR5, ford 4f27E

Servo Bore Tool Kit


Individual Bush SleevesPart Number: NB-14505

Mercedes 722.0, 100, 200, 300, 400, 500

Servo Spring Compressor - 722.0, 100, 200, 300, 400, 500

• CompressesandholdstheB1servo• Allmetalconstructions• Usesoriginalmountingposition• 2threadtypebolts

Part Number: MXT-50000

Spring Compressor - 722.0, 100, 200, 300, 400, 500

• Throughdrumdesign• ForK1,K2andB3applications• Fixedarmconstruction• Forremovingsnapringonplate



37

© Motospecs

SPECIALIST TOOLSTRANSMISSIONMercedes 722.0, 100, 200, 300, 400, 500

Selector Bush Pliers - 722. All


• ForremovingandinstallingnylonselectorbushesfoundonmostMercedesvehicles

• Alsosuitableforothermakesandmodels

Mercedes 722.300, 400, 500

Internal Piston Sleeve - 722.300, 500

• K1andK2pistonintocarrier• Allmetalconstruction• Suppliedwithedgeprotector• UsedwithMXT-40020


Sleeve and End Float Kit


722.400• 135mmK1sleeve

722.300, 500• 127mmK1andK2sleeve• 118mmK1sleeve• UsedwithMXT-40000

Internal Piston Sleeve - 722.300, 500

• Forinstallingreversepistonintorearofpumphousing• Allmetalconstruction• Suppliedwithedgeprotector


38


SPECIALIST TOOLSTRANSMISSIONMercedes 722.300, 400, 500

Internal Piston Sleeve - 722.400


• Forinstallingreversepistonintorearofpumphousing• Allmetalconstruction• Suppliedwithedgeprotector

Sleeve Kit


722.300• K1andK2plunger

722.500• K1andK3plunger• Forextractingandinstallingplunger

Oil Pressure Testing Jig

• Dualmountedpressuregauges• 100psiand400psirespectively• 9adaptersincludedforbothhighandlowpressures• Dual2metresofhose• Hanginghook• Alsosuitableforothermakesandmodels


Mercedes 722.600, 700, 800, 900

Spring Compressor/Sleeve Kit


722.600, 900• Installationofreversepistonintofrontcover• CompressionforK1andK2circlip

722.600• CompressesclutchtoaccessretainingringonB½andK½

39

© Motospecs

SPECIALIST TOOLSTRANSMISSIONMercedes 722.600, 700, 800, 900

Dipstick - 722.600, 900

Part Number: MX-60020

• UsedtodeterminefluidlevelsonMercedesmodels1997andnewerforbothengineandtransmission

• Length:1220mm

Dipstick - 722.700, 800

• UsedtodeterminefluidlevelsonAandBclassvehicles• Length:920mm


VW 095-01P

Essential Kit

• Allowspulleyexpansionforremovalofchain• Preciseinstallingtoolsforcirclipandpinionseal• Pressingpinionshaft/pulleyintocase• MadeinAustralia

Part Number: VXT-15000

VW/Audi/Skoda 01J CVT

Pinion Service Tool Kit

• Safelyremovesandrefitsthecastellatedpinionretainingnut• Allowseasyremovalofthepinionshaft• Allowsinspectionandremovalofthemainpinionbearingandseal


40


Front Cover Support Jig

• Allowsremovalofforwardclutchdrumwhilstsupportingfrontcoverwithoutdamage

• MadeinAustralia


SPECIALIST TOOLSTRANSMISSIONVW/Audi/Skoda 01J CVT

Press Jig and Plate Tool Kit

• Usedtopresspinionshaftandpulleythroughcase• MadeinAustralia


VW/Audi/Skoda DSG 02E/OAM

01J Multi Spline Spanner

• Usetoremovethereversethreadedmultisplineretainingnutonthepinionshaft

• Allsteelconstruction• ½”drive• Precisionmachined• MadeinAustralia


Clutch Retaining Bar


• Foradjustingclutchendfloatclearanceonwettypedualclutchtransmissions

41

© Motospecs

SPECIALIST TOOLSTRANSMISSIONVW/Audi/Skoda DSG 02E/OAM




Clutch Service Kit - 0AM 7 Speed Dry Clutch

• Usedforremoving,reinstallingandadjustingclutchengagementbearings

• Includesclutchforkretainingbar• 7pieceset• Suits:0AM7Speeddryclutchtransmission• Suppliedinablowmouldedstoragecase


Zf 5HP18, 19, 24, 30

Socket - 5HP18, 19


• 4pinsockettoremoveoutputflangeretainingnut• Impactdesign• Removeandrefit• ½”drive• SuitableforRWDvehiclesonly

Socket - 5HP24, 30


• 6pinsockettoremoveoutputflangeretainingnut• Impactdesign• Removeandrefit• ½”drive• SuitableforRWDvehiclesonly

42


SPECIALIST TOOLSTRANSMISSIONZf 6HP26

Bush Driver Set

• 8pieceset• Allmetalconstruction• Finishestoexactfactorydepth• SpecificallydesignedtobeusedwithBushKitZBK-626010• MadeinAustralia


Transmission General

Diaphragm Press Rings

• 3pieceset• Allmetalconstruction• Canbeusedonotherdiaphragmtypedrums• MadeinAustralia• TobeusedwithUXT-10000press


Press Adapter

• Allmetalconstruction• TobeusedwithZXT-626010whenusedinanormalpress• MadeinAustralia


Universal Hydraulic Flaring Tool• Kitincludesvarioussizesofdiesandadapterstoenableflaringof

transmission,brakeandairconditioninglines• Push-connect:1⁄4”,5⁄16”,3⁄8”• Fuelline:5⁄16”,3⁄8”• Single/doubleflare:3⁄16”,1⁄4”,5⁄16”,3⁄8”,1⁄2”• Metricflare:4.75mm,6mm,8mm,10mm• Suppliedinablowmouldedstoragecase


43

© Motospecs

SPECIALIST TOOLSTRANSMISSIONGeneral Transmission

Universal Flaring Tool

• Kitincludesvarioussizesofdiesandadapterstoenableflaringoftransmission,brakeandairconditioninglines

• Includes5adapters:3⁄16”,1⁄4”,5⁄16”,3⁄8”,&1⁄2”• Designedfordoubleorsingleflareincopper,aluminium,brassand

softsteelfluidlines• Suppliedinablowmouldedstoragecase


Spring Compressor

• Throughtypeapplication• Largebaseplate• Canbeusedincase


Clutch Spring Compessor

• Throughtypedesign• 2legged,screwtype• Largebaseplate• Designedforonbenchapplications


Driver Kit

• 9piecebearingandbushdriver• Alloyconstruction• Suppliedinablowmouldedstoragecase


44


SPECIALIST TOOLSTRANSMISSIONTransmission General

Driver Set - 52 Piece

• Usedtodrivebearings,bushesandseals• From18mmto65mm• 1x74mmdisc• Allsteelconstruction• Suppliedinablowmouldedstoragecase


Assembly Jig

• Uniquebasecanbesetonbenchormountedonenginestandformobility

• “C”type• Lockableposition• 1000poundsmax(450kg)workingload


CV Shaft Remover

• UsedtoremoveCVShaftsfromtransmissions• Slidehammerdesign• 48mmopenfork


Seal Puller

• Removesoilseals• Twintipsuitsmostapplications


45

© Motospecs

SPECIALIST TOOLSTRANSMISSIONGeneral Transmission

Extra Long Pick & Hook Set

• 8pieceset• 230mmlong• Softgriphandles• Suppliedinpouchcase


H Gauge Clearance Tool

• Usedtoeasilymeasureclutchandendclearances• Universaldesign


Oil Pan Separator

• Wide,tapered,roundbladeedge• Usedforwedgingbetweenmetalsurfacestobreakgaskethold• Idealforchemicallysealedsumps


Scraper Set 3 Piece

• Stainlesssteelblades• Timberhandles• Suppliedinprotectivepouch


46



Scraper Set 4 Piece

• Metalblades• Largeergonomichandles• 2narrowand2wideblades• 2longand2shortshanks• Suppliedinablowmouldedstoragecase


Sanding Pads 3M

• Quicklyremovescorkorpapergasketsandform-in-placegasketmaterialpriortoassembly

• Screwend,coarseT3,brown• 10pack


Universal Pump Pulley - Screw Type

• Allsteelconstruction• Multifit• MadeinAustralia


Universal Spring Compressor - Screw Type

• 3heightsettings• Quickwindhandle• Quickreleasemechanism• Removablecentrebaseplateforusewithshaftstyleassemblies• MadeinAustralia


47

© Motospecs


Spring Compressor

• Throughdrumdesign• 4xadjustableradiuscurvedlegs• Clutchdiameterfrom64mmto175mm


Accumulator Cleaners - All Transmissions

• Brushesworktodeglazeboreliningsurface• Removelightscratchesandsmallburs• Servicebores25mmto50mm

Part Number: AB100

Valve Body Bore Cleaners - All Transmissions

• Brushesworktodeglazeboreliningsurface• Removelightscratchesandsmallburs• Servicebores6mmto25mm

Part Number: BB100

Valve Body Rebuilding Tray

• 34variablesizecompartments• 340mmx450mm• Durableplasticconstruction


48



Diamond Hone

• Sonnaxfine-gritdiamondhone• Extendslifeofyourreamerbyremovingaluminiumbuild-up• Keepscuttingintegrity

Part Number: EZ-LAP

Digital Torque Wrench 1⁄4” Drive

• Inbuiltmemorywillholdupto50torquesettings• Measures6-30Nm• Accuracy±4%• Autoshutoff80seconds• Suppliedinablowmouldedstoragecase


Transmission Filling Kit 7.5L

• Manualleveroperated• Separatefillingcaponthereservoir• Outputcapacity:700cc/cycle• 8pieceadapterfillingkitincluded• Suitablefor:Audi,Ford,Mercedes722.9,NewMini,Porsche,Seat,

Skoda,VWanduniversalapplications


Selector Bush Pliers

• ForremovingandinstallingnylonselectorbushesfoundonmostMercedesvehicles

• Alsosuitableforothermakesandmodels


49

© Motospecs


Oil Pressure Testing Jig

• Dualmountedpressuregauges• 100psiand400psirespectively• 9adaptersincludedforbothhighandlowpressures• Dual2metresofhose• Hanginghook


Fluid Line Stopper - 2 Piece Set

• Usedonfluidlinestostopflowafterdisconnection• Suitableforuseonflexiandsolidfluidlines• Suits3⁄8”,5⁄16”,1⁄2”pipeendsandbanjotype• Springloaded• Packof2


Fluid End Line Stopper

• Idealforsealingmetalflaredbrake,transmissioncoolingandfuelpipes• Screwtype• Suitspipesize4mmto10mm• Soldindividually


Master Line Disconnect Kit

• Suitableformostfuel,transmissioncoolerandairconditioningapplications

• 28pieceset• Aluminiumandhardenedplasticconstruction• Suppliedinablowmouldedstoragecase


50



Fluid Line Disconnect Tool Kit

• Forseparatingfittingsontransmissioncooler,fuelandairconditioninglines

• Includessizes:1⁄4",5⁄16",3⁄8",1⁄2"• Suitableformostpopularapplications• Suppliedinablowmouldedstoragecase


Cooler Line Disconnector

• Allowseasyremovaloftransmissioncoolerlines• Speciallydesignedtoworkintightplaces• SuitableforGMvehicles


Anti Static - All Transmissions

• Groundstechniciantosafelyworkonallmechatronics• Comfortablesoftwristband• Alligatorclipforgrounding• Longspringlead

Part Number: UXE-10000

Wet Air Tester - Valve Body / Pump

• ClearPerspexforeasyvalvesight• Canbeusedtocheckforstickingvalvesandendplug

bores

Part Number: SWAT-P1

Transmission Diagnostic

51

© Motospecs

SPECIALIST TOOLSTRANSMISSIONTransmission Diagnostic

Glycol Contamination Test Kit

• Teststransmissionfluidtofindifitiscontaminatedwithglycol• Glycolcontaminationdoesnotalwaysalterthecolouroftheoil• Glycolcauseseventualfailureofthefrictionmaterialwithas

littleas1%glycol• Performsupto25tests


VEHICLE SPECIfICAUDI, SKODA, VOLKSWAGEN

Socket - CVT, Automatic, Manual, DSG

• ½”drivetamperfordrainplugremovalandrefitting• Willsuitothermakesandmodels• Automatic,manualandCVTapplications


Multi Spline CV Shaft Socket

• 78mminlength,½”drive• M18multispline• Impactsteelconstruction


Stabiliser Bar Engine - VW T5• Application:VWTransporterT52004-On,andother

applications• Usedforsupportingengineduringremovaland

installationofgearbox• Measurements:578mm(L)x1830mm(W)x145mm(H)• Includes2chainsand2hooks


52


Wrench - Haldex Final Drive

• SpecialisedtoolforremovalofcartridgefilteronHaldexfinaldriveassemblies

• Allenkeysuppliedfordrain• Allmetalconstruction



Socket - CVT, Automatic, Manual, DSG

• ½”drivemultisplineforremovaloftheretainingboltsontheinnerCVshaftflange

• Impactconstruction• 800mmintotallength• AvailableinM8,M10,M12,M14sizes

Part Number: VXT-14130M8




53

© Motospecs


fORD COURIER / MAZDA BRAVO

Crank Turning Socket• 1⁄2”drive,22mmsquareand12mmrotatingpivotpin• ApplicabletoVW,Audi,SeatandSkodaengines: 2.4LV6,3.2LV6,4.2LV8,5.2LV10• Locksintopulleyretainingbolts





Cluster Bearing Remover - M5/R5 (Sump and Non Sump Type)

• Allowseasyremovalofthecaseclusterbearings• Holdsfromtheretainingclipgroove• Allmetalconstruction• MadeinAustralia


fORD fALCON BA-fG TERRITORY

Ford IRS Differential Mounts and Installation Tool

• SuitablefortheremovalandinstallationofForddifferentialsupportbushes

-BA-FGFordFalcon(rear) -FordTerritories(frontandrear)• MadeinAustralia


54


VEHICLE SPECIfICfORD MONDEO / fOCUS

HOLDEN RODEO / ISUZU D-MAX

MERCEDES




Isuzu Crankshaft and Oil Seal

• Replacementandinstallationtool• Accuratelyremovesandinstallsbothfrontandrearseals• Suitsengines:4BE,4HF1,4HG1,4JG,6HH1and6HK1


Dipstick Set - Engine & Transmission• 4pieceset• Transmission:Green920mm.Suits722.7/8• Transmission:Red1220mm.Suits722.6/9• Engine:Blue930mmVolute.SuitsEngine112,

113,271,272,273,279,646,647,648,651• Engine:Yellow930mmStraight.SuitsEngine

103.943/984/985,104,111,119,120,137,603.913/963/97,604,605,606,611,612/965,613,628,629,647,648,651


55

© Motospecs

VEHICLE SPECIfICTOYOTA LANDCRUISER 60, 70, 80, 100 SERIES / HILUX

Gear Lever Remover - 60 and 70 Series LandCruiser

• Allowsoncarremovalofgearlever• Allmetalconstruction• MadeinAustralia


Gear Lever Remover - 80 and 100 Series LandCruiser, All HiLux

• Allowsoncarremovalofgearlever• Allmetalconstruction• MadeinAustralia


56

Specialist know how to help you select the right gear.

Oil Coolers

Manual Transmission

Automatic Transmission

Additives & Fluids Specialist Tools Power Steering

Differential

aBn 97 097 993 283

australia

2c glendenning roadglendenning nsW 2761

Phone 1800 463 646

www.drivetech.com.au

new Zealand

278 church streetPenrose auckland 1061

Phone 0800 333 125

www.drivetech.org.nz

Drivetech Catalogue

Documents

Transcript of Drivetech Catalogue