9594 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Medium Size Universal Mill Drill - Mill Tilting Head MH 50G 3ph 0333-8180 MH 50V 3ph 0333-8185

Electrical Connection 400V. 3ph.50HZTable Size LxW 850 x 240 mm Spindle to Table 545 mmT Slot size/No./Dist. 18mm / 3 / 80mmTravel X axis 520 mm

Travel Y axis 260 mmTravel Z axis Man/auto 460 mm / 385 mmMotor 1.5 / 2.2 kW 2.2 kW Drilling Capacity 38 mmCont. Drilling Capacity 32 mmSpindle Taper BT40Face Mill Capacity 80 mmEnd Mill Capacity 32 mmQuill Travel 115 mmThroat Depth 260 mmHead Swivel ± 30°Gear Positions 2 x 6 speeds 6 speed Vari. Spindle Speeds RPM 225 - 3,260 50 - 3,260

Dims LxWxH(cm) 121 x 102 x 165Weight 525 Kg

Specification MH 50G MH 50V

l Heavy, sturdy & solid columns made of premium cast material with ground and shaven dovetail guide for excellent stability and precisionl Clockwise/Anti-clockwise rotation l Excellent concentricity thanks to tapered roller bearings, better than 0.015mm measured in the spindle sleeve l Gear head pivots through 60°l Manual fine feed l Drilling depth stopl Thread tapping mode l Two-stage industrial quality electric motor

Features

Optional Accessories BT40 x 27 mm Face Mill Holder 0335-3336BT40 Drill Chuck 1 - 13mm 0353-6333BT40 x 3 MT Adapter 0335-3335BT40 ER32 Collet Chuck 0335-3334ER32 Collet Chuck Spanner 0335-3307ER32 Collet Set 18 Pcs 3-20mm 0344-1122BT40 Taper Cleaning Tool 0335-3331BT40 Pull Stud 0335-3332Tool Height Adjuster 0353-6290Universal Table Feed V99 0335-2022Assembly Kit V99 X axis 0335-2036

Starter Kit BT40BT40 Keyless Drill chuck 1-13 mm BT40 x 27mm Face Mill holderBT40 ER 32 spring collet chucks 3 pcs. ER 32 Spring collet set 18 pcs 3-20mmER 32 collet chuck SpannerBT 40 x 3MT adapterBT40 Pull studs 15 pcsBT40 Taper cleaning tool Tool Height adjusterBT40 Assembly & tool adjustment gauge2 pcs. each Weldon 6 & 20 mm1 pc. each Weldon 8 , 10 , 12 & 16 mm

0335-3284

Machine Stand 0335-3015750 x 750 x 730mmWeight 134 Kg

Can change tool in seconds!

96 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Drill - Mill Tilting Head

MH 35G 3ph 0333-8165 MH 35V 3ph 0333-8170

Electrical Connection 400V. 3ph.50HZTable Size LxW 750 x 210 mm Spindle to Table 440 mmT Slot 12mm / 3 / 63mmTravel X axis 450 mm

Travel Y axis 200 mmTravel Z axis 460 mmMotor (2 Speed) 1.1/1.5 kW 1.5 kW Drilling Capacity 32 mmCont. Drilling Capacity 28 mmSpindle Taper BT30Face Mill Capacity 80 mmEnd Mill Capacity 28 mmQuill Travel 90 mmThroat Depth 215 mmHead Swivel ± / - 60°Gear Positions 2 x 6 steps 6 speed elec. Spindle Speeds RPM 220 - 3,100 50-3,260

Dims LxWxH(cm) 85 x 103 x 134Weight 316 Kg

Specification MH 35G MH 35V Optional Accessories BT30 x 22mm Face Mill Holder 0335-3306BT30 Drill Chuck 1 - 13mm 0353-6303BT30 x 2 MT Adapter 0335-3305BT30 ER32 Collet Chuck 0335-3304BT30 ER32 Collet Chuck Spanner 0335-3307 ER32 Collet Set 18 Pcs 3 - 20mm 0344-1122Taper Cleaning Tool 0335-3301BT30 Pull Stud 0335-3302Universal Tabel Feed V99 0335-2022Assembly Kit V99 X axis 0335-2035

BT30 x 22 mm Face Mill holder, BT30 1-13 mm chuck, 2 pieces each Weldon Ø 6 mm & 20 mm, 1 Weldon each Ø 8,10,12 &16 mm, BT30 x 2 MT adaptor , BT30 ER32 collet chucks 3 Pcs, BT30 ER 32 collet chuck spanner ER32 spring collet set 18 Pcs 3-20mm, tool height adjuster, BT30 assembly & tool adjustment gauge, BT30 pull studs 14 Pcs, BT30 taper cleaning squeegee

Starter Kit BT30 0335-3282

Machine Stand 0335-3014 65 x 55 x 75 cmWeight 76 Kg

l Heavy, sturdy & solid columns made of premium cast material with ground and shaven dovetail guide for excellent stability and precisionl Clockwise/Anti-clockwise rotation l Excellent concentricity thanks to tapered roller bearings, better than 0.015mm measured in the spindle sleeve l Gear head pivots through 60°l Manual fine feed l Drilling depth stopl Thread tapping mode l Two-stage industrial quality electric motor

Features

Can change tool in seconds!

9796 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Drill - Mill Tilting Head Drill - Mill Tilting Head

MB4 P 3ph 0333-8460 MB4 PV 1ph 0333-8465

Features

Electrical Connection 400V. 3ph.50Hz 230V 1ph.50HzTable Size LxW 800 x 240 mmTable Slot Size/No/Dist. 14mm / 3 / 80mm Spindle to Table 420 mmTravel X axis Man/Auto 560 mm / 480 mm

Travel Y axis 195 mmTravel Z axis 350 mmMotor 1.1/1.5 kW 1.5 kW Drilling Capacity in Steel 32 mm 24 mmCont. Drilling in Steel 28 mm 20 mmSpindle Taper MT4Quill Travel 120 mmThroat Depth 258 mmHead Swivel ± 45°Gear Positions 2 x 6 steps 2 step VarioSpindle Speeds 95-3,200 rpm 60-2,760 rpmDims LxWxH (cm) 160 x 93 x 211Weight Kg 495

Specification MB4 P MB4 PV

l Facts that impress in terms of quality performance and price.l Heavy, solid cast design. Smooth action due to polished gearwheels running in an oil sump.Right/left rotationl Auto Quill feed with manual fine feed.l Motorised positioning of the Z axis.l Gear head pivots through ± 60°l Adjustable wedge railsl Drilling depth stopl Drilling/Thread tapping function

MB 4Pl Two-stage quality electric motorl Large speed range from 95-3,2000 rpm thanks to 12 switchable speedsl Speed display in DRO 5

MB 4PVl Large speed range from 60-2,760 rpml Variable speedsl Speed display in DRO 5

l Drill Chuck 3-16mml Solid cast stand l Drill Chuck Arbor MT 4/B16 l Chip Channel l Operating Tool

Included as standard:

Optional Tooling/Acc

Standard

See pages 102 - 128

ER32 x 4MT Collet Chuck with 18 collets 3-20mm0335-2094

98 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Drill - Mill Tilting Head MH 25V 1ph 0333-8155 MH 25SV 1ph 0333-8160

Electrical Connection 230V 1ph.50HzTable Size LxW 620 x 180 mmT-Slot Size/No./Distance 12 mm / 3 / 50 mm Travel X axis Man/Auto for sv only 400 mm / 380 mm

Travel Y axis Man/Auto for sv only 210 mm / 130 mmTravel Z axis Man / Auto for sv only 270 mm / 190 mmMotor 1.5 kW Face Mill Capacity Ø 50 mm End Mill Capacity Ø 25 mmSpindle Taper BT30Throat Depth 185 mmSpindle Speeds RPM 200 - 4,000Gear Positions electronic speed control Head Swivel 45°X Feed Torque/Speed 2.2 Nm / 150 - 930 mm/min Y Feed Torque/Speed 2.2 Nm / 100 - 580 mm/minZ Feed Torque/Speed 4,2 Nm / 80 - 450 mm/minDims LxWxH (cm) 97 x 98 x 103 Weight Kg 192 200

Specification MH25 V MH25 SV BT30 Starter Kit Comprising:BT30 x 22mm Face Mill holderBT30 Drill Chuck 1-13 mm2 pcs. each Weldon Ø 6 mm & 20 mm1 pc. each Weldon Ø 8 ,10 ,12 & 16 mmBT30 x 2MT AdapterBT30 ER32 collet chucks 3 PcsER 32 Spring collet chuck SpannerER32 spring collet set 18 Pcs 3-20mmTool Height adjusterAssembly & tool adjustment gaugeBT30 Pull studs 14 PcsBT30 Taper squeegee

Optional Tooling/Acc

Otional StandDims (LxWxH)70x50x75cm0335-3009

Featuresl Counterweight facilitates Z axis adjustment l Variable speed control l Easy tool change with quick clamping systeml Wide guide rails on Z axis l Groove prepared for easy retroactive mounting of magnetic strips l Inverter motor l Feed spindles can be adjustable spindle nuts l All guides are ground and finish shaved (oil pockets for lubrication) l Precision workmanshipl Particularly smooth action l Angular ball bearings on the axes l Head pivots through ± 45°l Right-hand/left-hand rotation l Height-adjustable protective screen with microswitch l Sturdy dovetail guide, precision ground and shaved with adjustable wedge rails

MH 25V l Easily readable speed display with milling head

Can change tool in seconds!

0335-3282

See pages 102 - 128

MH 25SVl Continuously variable feed on all axes l Rapid motion X/Y axis for fast positioning.l Digital 3-axis position display DRO 5l Feed cut-off limit position l Transportable control panel l The feed also switches off when the spindle is stationary

9998 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Drill - Mill Tilting Head Drill - Mill Tilting Head MH 20V MH 22V MH 22VD

Electrical Connection 230V 1ph.50HzTable Size LxW 500 x 180 mm 700 x 180 mmT-Slot Size/No./Distance 12mm / 3 / 63 Travel X axis 210 mm 480 mm

Travel Y axis 175 mmTravel Z axis 210 mm 270 mmDrilling Capacity 16 mm 20 mmFace Mill Capacity 52 mmEnd Mill Capacity 20 mm 20 mm Throat Depth 170 mmSpindle Taper 2MT BT20Gears 2 Stages Variable Speed Range 100-3,000 min 90-3,000 min Head Swivel ± 90° ± 90°Spindle Travel 50 mm 50 mmMotor 750W 1Ph 230V 950W 1Ph 230VDims LxWxH (cm) 75 x 65 x 82 95 x 65 x 95 Weight 94 Kgs 120 Kgs

Specification MH20 V MH22 V/VD AccessoriesBT20 x 16 mm Face Mill holder 0335-2728BT20 x B16 Drill Chuck Arbor 0335-2727Drill Chuck 1-13mm B16 0305-0623BT20 Weldon holder Ø 6 mm 0335-2732BT20 Weldon holder Ø 8 mm 0335-2734BT20 Weldon holder Ø 10 mm 0335-2736BT20 Weldon holder Ø 12 mm 0335-2738BT20 ER16 Collet chuck 0335-2741BT20 ER16 Collet chuck spanner 0335-2742ER16 Spring collet set, 12Pcs 1-10 mm 0344-0282BT20 Pull stud 0335-2726ER25 Collet Chuck MT2-M10 7Collets 3-583-001End Mill set HSS Tin coated 7-510-100Machine Stand 0335-3000Swarf Tray 0335-2999

l Feed spindles can be adjusted without play thanks to adjustable spindle nuts.l Sturdy dovetail guide, precision ground and shaved with adjustable wedge rails l EMC filter class B (for domestic use) l All guides are ground and finish shaved (oil pockets for lubrication) l Precision workmanship l Two-row angular contact ball bearings in the axes, adjustable without play.l Safety electrical system 24-volt version l Gaiter as guide protection l Clockwise/Anti-clockwise rotation.l Drilling/milling head pivots through ±90° for milling and drilling work in any angled position.l Machine lamp l Height-adjustable protective screen with microswitch for best possible user l Protection against chips and parts being flung out l Easily readable speed & depth display, toggles between mm/inch l Fine feed

Features

New MH22VD Includes digital position display

DRO 5 & magnetic strips on all axis

Robust drilling/milling machine with electronic, continuously controllable drive, MH 22VD with digital position display

DRO 5

Swarf Tray 0335-2999

Dims LxWxH: 72 x 47 x 3 cm

Machine Stand without Swarf Tray

0335-3000Dims LxWxH: 42 x 34

x 80 cm

Optional Tooling/Acc

See pages 102 - 128

1ph 0333-8115 1ph 0333-8135 1ph 0333-8136

100 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Drill - Mill Tilting Head MH 20VL 0333-8111 MH 20VLD 0333-8112

New MH22VD Includes digital position display

DRO 5 & magnetic strips

on all axis

Swarf Tray 0335-2999

Dims LxWxH: 72 x 47 x 3 cm

Machine Stand without Swarf Tray 0335-3000Dims LxWxH: 42 x 34 x 80 cm

l Feed spindles can be adjusted without play thanks to adjustable spindle nuts.l Sturdy dovetail guide, precision ground and shaved with adjustable wedge rails l EMC filter class B (for domestic use) l All guides are ground and finish shaved(oil pockets for lubrication) l Precision workmanship l Two-row angular contact ball bearings in the axes, adjustable without play. l Safety electrical system 24-volt version l Gaiter as guide protection l Clockwise/Anti-clockwise rotation. l Drilling/milling head pivots through ±90° for milling and drilling work in any angled position. l Machine lamp l Height-adjustable protective screen with microswitch for best possible user l Protection against chips and parts being flung out l Easily readable speed & depth display,toggles between mm/inch l Fine feed

Features

Electrical Connection 230V 1ph.50HzTable Size LxW 700 x 180 mm T-Slot Size/No./Dist. 12mm / 3 / 63 X axis Travel 480 mm

Y axis Travel 175 mmZ axis Travel 210 mm Drilling Capacity 16 mm Face Mill Capacity 52 mmEnd Mill Capacity 20 mm Throat Depth 170 mmSpindle Taper 2MT Gears 2 Stages Variable Speed Range 100-3,000 min Head Swivel ± 90°Spindle Travel 50 mmMotor 750 W 1Ph 230V Dims LxWxH (cm) 77 x 72 x 92 Weight 99 Kgs

Specification MH20 VL MH20 VLD

Optional Tooling/Acc

See pages 102 - 128

101100 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Drill - Mill Tilting Head BF 16 Vario 1ph 0333-8116

Electrical Connection 230V 1ph.50Hz Table Size LxW 400 x 120 mm T-Slot Size 10mm Travel X axis 220 mm

Travel Y axis 160 mm Travel Z axis 210 mmDrilling Capacity 16 mmFace Mill Capacity 63 mmEnd Mill Capacity 20 mmThroat Depth 175 mmSpindle Taper MT2 Spindle Speed (RPM) 100 - 3,000Head Swivel ± 90°Spindle Travel 50 mmMotor 500 W (230V. 50Hz 1 Ph)Dims LxWxH (cm) 51 x 47 x 80Weight 62 Kgs

Specification BF 16 Vario

Optional Tooling/Acc

Featuresl Digital Quill travel indicator, precision of reading 0.01mm l mm/inch conversion l Sturdy & precision dovetail slideway with adjustable tapered gibs l Infinitely variable drive with electronic regulation.l Dynamic regulation of revolutions from100 to 3,000 rpm l Positive clamping of the spindle sleeve in the drill head l Integrated work light l High concentricity precision <0.01 measured in the spindle sleevel D.C Motor with premanent speed monitoring

See pages 102 - 128

Swarf Tray 0335-2999

Dims LxWxH: 72 x 47 x 3 cm

Machine Stand without Swarf Tray

0335-3000Dims LxWxH:

42 x 34 x 80 cm