DRBL

Diskless Remote Boot in Linux

Edit by Hsieh, Tien-Jan

Outline

Introduction Download Purpose Demo

1.Save local disk into img file

2.Restore img into local disk

Introduction

Official Website: http://drbl.nchc.org.tw

A free software developed by National Center for High-performance Computing.

A distribution is based on Debian.

Download

Website: http://sourceforge.net/projects/drbl/files/drbl_live_stable/

Purpose

Install the same OS on multiple computers.

Client:

Distributed mode. Use the local resource.

DEMO

1.Save local disk into img file

2.Restore img into local disk

Save local disk into img file Start-Page

Save local disk into img file Language-setting

Save local disk into img fileStep by Step:

1. Step1: Click單機版

2. Step2: Choose device-image

3. Step3: Plug in usb device && Choose local-dev

4. Step4: Choose the usb device before

5. Step5: Choose root directory of usb device

6. Step6: Choose beginner mode

7. Step7: Choose savedisk

8. Step8: Set the filename for the img

9. Step9: Choose the source disk to make img

10. Step10: Ignore fsck check

11. Step11: Choose “yes” && check img

Step1: Click單機版

Step2: Choose device-image

Step3: Plug in usb device && Choose local-dev

Step4: Choose the usb device before

Step5: Choose root directory of usb device

Step6: Choose beginner mode

Step7: Choose savedisk

Step8: Set the filename for the img

Step9: Choose the source disk to make img

Step10: Ignore fsck check

Step11: Choose “yes” && check img

Restore img into local diskStep by Step:

1. Step1: Click單機版

2. Step2: Choose device-image

3. Step3: Plug in usb device && Choose local-dev

4. Step4: Choose the usb device before

5. Step5: Choose root directory of usb device

6. Step6: Choose beginner mode

7. Step7: Choose restoredisk

8. Step8: Choose the img before

9. Step9: Choose local disk(sda)

Restore img into local disk

Step1: Click單機版

Step2: Choose device-image

Step3: Plug in usb device && Choose local-dev

Step4: Choose the usb device before

Step5: Choose root directory of usb device

Step6: Choose beginner mode

Step7: Choose restoredisk

Step8: Choose the img before

Step9: Choose local disk(sda)

Thank you for listening.