Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS...
-
Upload
colleen-peters -
Category
Documents
-
view
215 -
download
0
Transcript of Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS...
![Page 1: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/1.jpg)
Dr. Nasim ZafarElectronics 1
EEE 231 – BS Electrical EngineeringFall Semester – 2012
COMSATS Institute of Information TechnologyVirtual campus
Islamabad
![Page 2: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/2.jpg)
Revision: 1. Semiconductor Materials:
Elemental semiconductors
Intrinsic and Extrinsic Semiconductor
Compound semiconductors
III – V Gap, GaAs
II – V e.g ZnS, CdTe
Mixed or Tertiary Compounds e.g. GaAsP
2. Applications:
• Si diodes, rectifiers, transistors and integrated circuits etc
• GaAs, GaP emission and absorption of light
• ZnS fluorescent materials
![Page 3: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/3.jpg)
Revision:
3. The Band Theory of Solids
Quantum Mechanics discrete energy levels
– S1 – P3 – model for four valency
– Si – atom in the diamond lattice four nearest neighbors
– Sharing of four electrons S1 – P3 – level, the covalent bonding!
Pauli’s Exclusion principle for overlapping S1 – P3 electron wave functions Bands
242
42
no
eZomE
![Page 4: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/4.jpg)
Revision:
4. Band Gap and Material Classification
Insulators Eg: 5 – 8 eV
Semiconductor Eg: 0.66 eV – 2/3 eV
Metals overlapping
The classification takes into account
i. Electronic configuration
ii. Energy Band-gap
Examples:
Wide: Eg 5 eV (diamond)
Eg ~ 8 eV (SiO2)
Narrow: Eg = Si = 1.12, GaAs = 1.42
![Page 5: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/5.jpg)
5. Charge Carriers in Semiconductors
Electrons and Holes in Semiconductors
• Intrinsic Materials
• Doped – Extrinsic Materials
• Effective Mass
Hydrogenic Model:
2
042
4
s
enMBE
eVHEsoM
nM1.0
21.
)()(
072.0~045.0
GaPBE
![Page 6: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/6.jpg)
Lecture No: 6
P-N Junction - Semiconductor Diodes
![Page 7: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/7.jpg)
Outcome:
Upon completion of this topic on P-N Junctions, you will be able to appreciate:
• Knowledge of the formation of p-n junctions to explain the diode operation and to draw its I-V characteristics. so that you can draw the band diagram to explain their I-V characteristics and functionalities.
• Diode break down mechanisms; including the Avalanche breakdown and Zenor break down; The Zener Diodes.
• Understanding of the operation mechanism of solar cells, LEDs, lasers and FETs.
![Page 8: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/8.jpg)
Semiconductor Devices:
Semiconductor devices are electronic components that use the electronic properties of semiconductor materials, principally ; silicon, germanium, and gallium arsenide.
Semiconductor devices include various types of Semiconductor Diodes, Solar Cells, light-emitting diodes LEDs. Bipolar Junction Transistors.
Silicon controlled rectifier, digital and analog integrated circuits. Solar Photovoltaic panels are large semiconductor devices that directly convert light energy into electrical energy.
Dr. Nasim Zafar
![Page 9: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/9.jpg)
THE P-N JUNCTION
![Page 10: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/10.jpg)
The P-N Junction
The “potential” or voltage across the silicon changes in the depletion region and goes from + in the n region to – in the p region
![Page 11: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/11.jpg)
![Page 12: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/12.jpg)
The P-N Junction
Formation of depletion region in PN Junction
![Page 13: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/13.jpg)
![Page 14: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/14.jpg)
Forward Biased P N-Junction
Depletion Region and Potential Barrier Reduces
![Page 15: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/15.jpg)
Biased P-N Junction
– Biased P-N Junction, i.e. P-N Junction with voltage applied across it
– Forward Biased: p-side more positive than n-side; – Reverse Biased: n-side more positive than p-side; – Forward Biased Diode:
• the direction of the electric field is from p-side towards n-side • p-type charge carriers (positive holes) in p-side are pushed
towards and across the p-n boundary, • n-type carriers (negative electrons) in n-side are pushed towards
and across n-p boundary current flows across p-n boundary
![Page 16: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/16.jpg)
Introduction:
Semiconductor Electronics owes its rapid development to the P-N junctions. P-N
junction is the most elementary structure used in semiconductor devices and
microelectronics and opto-electronics. The most common junctions that occur in micro
electronics are the P-N junctions and the metal-semiconductor junctions.
Junctions are also made of different (not similar) semiconductor materials or compound semiconductor materials. This class of devices is called the heterojunctions; they are important in special applications such as high speed and photonic devices. There is , of course, an enormous choice available for semiconductor materials and compound semiconductors that can be joined/used. A major requirement is that the dissimilar materials must fit each other; the crystal structure in some way should be continuous. Intensive research is on and there are attempts to combine silicon technology with other semiconductor materials.
![Page 17: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/17.jpg)
Reverse biased diode
– reverse biased diode: applied voltage makes n-side more positive than p-side electric field direction is from n-side towards p-side pushes charge carriers away from the p-n boundary depletion region widens, and no current flows
– diode only conducts when positive voltage applied to p-side and negative voltage to n-side
– diodes used in “rectifiers”, to convert ac voltage to dc.
![Page 18: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/18.jpg)
Reverse biased diode
Depletion region becomes wider, barrier potential higher
![Page 19: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/19.jpg)
P-N Junctions - Semiconductor Diodes:
Introduction
Fabrication Techniques
Equilibrium & Non-Equilibrium Conditions:
• Forward and
• Reverse Biased Junctions
Current-Voltage (I-V ) Characteristics
![Page 20: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/20.jpg)
Introduction:
p-n junction = semiconductor in which impurity changes abruptly from p-type to n-type ; “diffusion” = movement due to difference in concentration, from higher to lower concentration; in absence of electric field across the junction, holes “diffuse” towards and across boundary into n-type and capture electrons; electrons diffuse across boundary, fall into holes (“recombination of majority carriers”); formation of a “depletion region”
(= region without free charge carriers) around the boundary;
charged ions are left behind (cannot move):negative ions left on p-side net negative charge on p-side of the junction; positive ions left on n-side net positive charge on n-side of the junction electric field across junction which prevents further diffusion
![Page 21: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/21.jpg)
Fabrication Techniques:
Epitaxial Growth Technique
Diffusion Method
Ion Implant
![Page 22: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/22.jpg)
Epitaxial Growth of Silicon
• Epitaxy grows additional silicon on top of existing silicon
(substrate)
– uses chemical vapor deposition– new silicon has same crystal
structure as original
• Silicon is placed in chamber at high temperature– 1200 o C (2150 o F)
• Appropriate gases are fed into the chamber– other gases add impurities to the
mix
• Can grow n type, then switch to p type very quickly
![Page 23: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/23.jpg)
Diffusion Method
• It is also possible to introduce dopants into silicon by heating them so they diffuse into the silicon
High temperatures cause diffusion
• Can be done with constant concentration in atmosphere
• Or with constant number of atoms per unit area
• Diffusion causes spreading of doped areas
top
side
![Page 24: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/24.jpg)
Ion Implantation of Dopants
• One way to reduce the spreading found with diffusion is to use ion implantation:– also gives better uniformity of dopant– yields faster devices– lower temperature process
• Ions are accelerated from 5 Kev to 10 Mev and directed at silicon
– higher energy gives greater depth penetration– total dose is measured by flux
• number of ions per cm2
• typically 1012 per cm2 - 1016 per cm2
• Flux is over entire surface of silicon
![Page 25: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/25.jpg)
Semiconductor device lab.KwangwoonUniversity Semiconductor Devices.
I-V Characteristics of PN Junctions I-V Characteristics of PN Junctions
Diode characteristics
* Forward bias current * Reverse bias current
![Page 26: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/26.jpg)
Ideal I-V Characteristics
1) The abrupt depletion layer approximation applies.
- abrupt boundaries & neutral outside of the depletion region
2) The Maxwell-Boltzmann approximation applies.
3) The Concept of low injection applies.
![Page 27: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/27.jpg)
Biasing the P-N Junction
Forward Bias
Applies - voltage to the n region and + voltage to the p region
CURRENT!
Reverse Bias
Applies + voltage to n region and – voltage to p region
NO CURRENT
THINK OF THE DIODE
AS A SWITCH
![Page 28: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/28.jpg)
Depletion region, Space-Charge Region:
• Region of charges left behind: The diffusion of electrons and holes, mobile charge carriers, creates ionized impurity across
the p n junction.
• Region is totally depleted of mobile charges - depletion region
• The space charge in this region is determined mainly by the ionized acceptors (- q NA) and the ionized donors (+qND).
• Electric field forms due to fixed charges in the depletion region
(Built-in-Potential).
•Depletion region has high resistance due to lack of mobile charges.
![Page 29: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/29.jpg)
Current-Voltage Characteristics
THE IDEAL DIODE
Positive voltage yields finite current
Negative voltage yields zero current
REAL DIODE
![Page 30: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/30.jpg)
Various Current Components
30
p n
VA = 0 VA > 0 VA < 0
Hole diffusion current
Hole drift current
Electron diffusion current
Electron drift current
p n
Hole diffusion current Hole diffusion current
Hole drift current Hole drift current
Electron diffusion current Electron diffusion current
Electron drift current Electron drift current
E E E
![Page 31: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/31.jpg)
Qualitative Description of Current Flow
Equilibrium Reverse bias Forward bias
![Page 32: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/32.jpg)
P-N Junction–Forward Bias
• positive voltage placed on p-type material• holes in p-type move away from positive terminal, electrons in n-
type move further from negative terminal• depletion region becomes smaller - resistance of device decreases• voltage increased until critical voltage is reached, depletion region
disappears, current can flow freely
![Page 33: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/33.jpg)
P-N Junction–Reverse Bias
• positive voltage placed on n-type material
• electrons in n-type move closer to positive terminal, holes in p-type move closer to negative terminal
• width of depletion region increases
• allowed current is essentially zero (small “drift” current)
![Page 34: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/34.jpg)
Forward Biased Junctions Effects of Forward Bias on Diffusion Current:
When the forward-bias-voltage of the diode is increased, the barrier
for electron and hole diffusion current decreases linearly.
Since the carrier concentration decreases exponentially with
energy in both bands, diffusion current increases exponentially as the
barrier is reduced.
As the reverse-bias-voltage is increased, the diffusion current decrease
rapidly to zero, since the fall-off in current is exponential.
34
![Page 35: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/35.jpg)
Reverse Biased Junction Effect of Reverse Bias on Drift current
When the reverse-bias-voltage is increased, the net electric field
increases, but drift current does not change.
In this case, drift current is limited NOT by HOW FAST carriers are
swept across the depletion layer, but rather HOW OFTEN.
The number of carriers drifting across the depletion layer is small
because the number of minority carriers that diffuse towards the
edge of the depletion layer is small.
To a first approximation, the drift current does not change with the
applied voltage.
35
![Page 36: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/36.jpg)
Semiconductor device lab.KwangwoonUniversity Semiconductor Devices.
Current-Voltage Relationship
Quantitative Approach
![Page 37: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/37.jpg)
Semiconductor Devices
Application of PN Junctions
PN
JUNCTION
PN Junction diode
Junction diode
Rectifiers
Switching diode
Breakdown diode
Varactor diodeTunnel diode
Photo-diode
Light Emitting diode & Laser Diode
BJT (Bipolar Junction Transistor)
Solar cell
Photodetector
HBT (Heterojunction Bipolar Transistor)
FET (Field Effect Transistor)
JFET
MOSFET - memory
MESFET - HEMT
![Page 38: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/38.jpg)
Summary:
Semiconductor Devices:Semiconductor Diodes,
Solar Cells, LEDs. Bipolar Junction Transistors.
Solar Photovoltaic
Biased P-N Junction:– Forward Biased: p-side more positive than n-side; – Reverse Biased: n-side more positive than p-side;
Fabrication Techniques:Epitaxial Growth Technique
Diffusion Method
Ion Implant
Current-Voltage Relationship
![Page 39: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/39.jpg)
P-N Junction I-V characteristics
Voltage-Current relationship for a p-n junction (diode)
![Page 40: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/40.jpg)
Boundary Conditions:
):(ln barrierpotentialinbuiltVn
NNVV bi
i
datbi
If forward bias is applied to the PN junction
)exp(
)exp(
kT
eVPP
kT
eVnn
anon
apop
![Page 41: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/41.jpg)
Semiconductor Devices
Minority Carrier Distribution
)exp(]1)[exp()(n
papop L
xx
kT
eVnxn
)exp(]1)[exp()(n
n
t
anon L
xx
V
Vpxp
0,0',0))((
Eg
xP
t
n
t
n
po
nnp
np
xppg
x
xpE
x
xpD
rigionn
))(('
))(())((2
2
<p-region>
<n-region>
Steady state condition :
Steady state condition :
![Page 42: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/42.jpg)
Semiconductor Devices
Ideal PN Junction Current
)()()( 1eJxJxJJ tVaVsnppn
)()()( 1eJxJxJJ tVaVsnppn )()()( 1eJxJxJJ tVaV
snppn
)()()( 1eJxJxJJ tVaVsnppn ]1)[exp()(
)()(
,
]1)[exp()(
)()(
t
a
n
ponpn
xx
pnpn
t
a
p
nopnp
xx
npnp
V
V
L
peDxJ
dx
xdneDxJ
Similarly
V
V
L
peDxJ
dx
xdpeDxJ
p
n
)()()( 1eJxJxJJ tVaVsnppn
)()()( 1eJxJxJJ tVaVsnppn
)(n
pon
p
nops L
neD
L
peDJ
![Page 43: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/43.jpg)
Semiconductor Devices
Forward Bias Recombination Current
)()(
)( 2
ppnn
nnpR
nopo
i
)'()'(
)( 2
ppCnnC
nnpNCCR
pn
itpn
wa
o
irec
ai
kT
eVeWneRdxJ
kT
eVnR
0
0max
)2
exp(2
)2
exp(2
)'()'(
)( 2
ppCnnC
nnpNCCR
pn
itpn
Recombination rate of excess carriers (Shockley-Read-Hall model)
)'()'(
)( 2
ppCnnC
nnpNCCR
pn
itpn
)
2exp(
kT
eVJJ a
rorec
R = Rmax at x=o
![Page 44: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/44.jpg)
Semiconductor Devices
Reverse Bias-Generation Current
)'()'(
)( 2
ppCnnC
nnpNCCR
pn
itpn
GWe
nRdxeJ
nR
npnEE
o
igen
o
i
onopo
iit
2
2
때일
일때
)'()'(
)( 2
ppCnnC
nnpNCCR
pn
itpn
)'()'(
)( 2
ppCnnC
nnpNCCR
pn
itpn
)'()'(
)( 2
ppCnnC
nnpNCCR
pn
itpn
G
pCnC
nNCCR
pn
itpn
''
2
Recombination rate of excess carriers (Shockley-Read-Hall model)
In depletion region,
n
pon
p
nops L
neD
L
peDJ We
nJ
o
igen
2
Total reverse bias current density, JR
)'()'(
)( 2
ppCnnC
nnpNCCR
pn
itpn
gensR JJJ n=p=0
![Page 45: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/45.jpg)
Semiconductor Devices
Total Forward Bias Current
]1exp[ kT
eVaJJ s )
2exp(
kT
eVJJ a
rorec Drec JJJ
)2
exp(kT
eVJJ a
rorec
Total forward bias current density, J
kT
eVaJJ
kT
eVaJJ
sD
rorec
lnln
2lnln
In general, (n : ideality factor)
)2
exp(kT
eVJJ a
rorec )21(],1)[exp( n
nkT
eVaII S
![Page 46: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/46.jpg)
Semiconductor Devices
Application of PN Junctions
PN
JUNCTION
PN Junction diode
Junction diode
Rectifiers
Switching diode
Breakdown diode
Varactor diodeTunnel diode
Photo-diode
Light Emitting diode & Laser Diode
BJT (Bipolar Junction Transistor)
Solar cell
Photodetector
HBT (Heterojunction Bipolar Transistor)
FET (Field Effect Transistor)
JFET
MOSFET - memory
MESFET - HEMT
![Page 47: Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649f535503460f94c77fdd/html5/thumbnails/47.jpg)
Summary:
Semiconductor Devices:Semiconductor Diodes,
Solar Cells, LEDs. Bipolar Junction Transistors.
Solar Photovoltaic
Biased P-N Junction:– Forward Biased: p-side more positive than n-side; – Reverse Biased: n-side more positive than p-side;
Fabrication Techniques:Epitaxial Growth Technique
Diffusion Method
Ion Implant
Current-Voltage Relationship