Dr. C. Yau Fall 2013
description
Transcript of Dr. C. Yau Fall 2013
![Page 1: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/1.jpg)
1
Intermolecular Forces (IMF)
Part I: Types of IMF Effect of IMF on Physical Properties
(based on Chap. 12 Sec 1-3 of Jespersen 6th Ed)
Dr. C. Yau
Fall 2013
![Page 2: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/2.jpg)
2
Review of the Postulates of the KMT
KMT = Kinetic Molecular TheoryKMT provides an explanation on the behavior of
an ideal gas:1. A gas consists of an extremely large number of
very tiny particles that are in constant, random motion.
2. The gas particles themselves occupy a net volume so small in relation to the volume of their container that their volume can be considered negligible.
3. The particles collide with each other and with the walls of the container in perfectly elastic collision. They move in straight lines between collisions neither attracting nor repelling each other.
![Page 3: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/3.jpg)
3
Parameters of a Gas
When determining the amount of gas, one must specify all of the following (the parameters of the gas):
P = Pressure
V = Volume
T = Temperature
![Page 4: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/4.jpg)
4
Review of the Postulates of the KMT
The KMT explains:• Boyle’s Law (P and V of a gas is inversely
proportional when T is kept constant).• Gay-Lussac’s Law (P and T of a gas is directly
proportional when V is kept constant). Increase in T increases the kinetic energy (KE) of the particles resulting in a higher frequency of collisions with the walls of the container, and thus increasing the P.
• Charles’ Law (V is proportional to T when P is kept constant.)
![Page 5: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/5.jpg)
5
View of the physical states at the particulate level
Solid: Particles closely packed, moving slowly.
Liquid: Particles further apart, moving faster.
Gas: Particles VERY far apart, moving VERY fast.
![Page 6: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/6.jpg)
6
1.Solid heating up
2.Solid melting into liquid
3.Liquid heating up
4. Liquid vaporizing
5. Gas heating up
Why is the temp not increasing while heat is added?
![Page 7: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/7.jpg)
77
Changes in Physical State at the Particulate Level
SOLID LIQUID GASAs heat is added to a solid, the energy is
absorbed as it…1) weakens the attractive forces between the
particles (allowing them to move away from each other), and
2) increases the kinetic energy of the particles (causing them to move faster).
As a gas, the particles no longer have any attractive forces between them.
These attractive forces are called“intermolecular forces” (often abbreviated IMF)
![Page 8: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/8.jpg)
8
Intermolecular ForcesThis is only a summary of what is covered on the
blackboard. Refer to your lecture notes for details.
Types of Intermolecular Forces:
1) Dipole Forces (or dipole-dipole attraction)
2) London Forces (or London Dispersion Forces, or Dispersion Forces)
3) Hydrogen Bonding (or Hydrogen Bond)
Other related forces:
4) Ion-dipole interaction (ionic solute in polar solvent)
5) Ion-induced dipole interaction (ionic solute in nonpolar solvent)
![Page 9: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/9.jpg)
9
Relative Strengths of Intermolecular Forces
Dipole Forces:• The greater the difference between the
electronegativities of the atoms, the larger the dipole, andthe stronger is the dipole force.
• However, one must be careful to compare only molecules of comparable size because a variation in size has a separate effect on the strength of the IMF.
![Page 10: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/10.jpg)
10
Relative Strengths of Intermolecular Forces
London Forces:• Effect of Size: The larger the particle, the
more polarizable it is, the stronger is the London forces.
• Effect of # of Atoms: The more atoms in the molecule, the larger the surface for interaction, the stronger is the London forces.
• Effect of Shape: The more compact the molecule, the less surface for interaction, the weaker is the London forces.
![Page 11: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/11.jpg)
11
PolarizabilityLearn the term “polarizable.”It refers to how easily the electron cloud
surrounding a particle can be distorted by an outside charge.
It is how “fluffy” the electron cloud is.A large particle tends to have “fluffier”
electron clouds as the electrons are further from the nucleus and therefore less tightly bound. It is said to be more polarizable.
It is more easily polarized, more easily form an induced dipole.
![Page 12: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/12.jpg)
12
What has IMF to do with BP?
If compound A has stronger IMF than compound B, which would have the higher BP?
A or B ?
Ans. A has the higher BP.
![Page 13: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/13.jpg)
13
Effect of # Atoms on IMF Strength
C6H14 has stronger London forces than C3H8.
BP = 68.7oC BP = - 42.1oC
What is the significance of a BP being lower than 25 oC?
![Page 14: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/14.jpg)
14
How do you explain the trend in the BP?
p.530
![Page 15: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/15.jpg)
15
Gases
Liquids
Solids
Methane, ethane,
propane, butane
Pentane, hexane, heptane, octane, (gasoline) nonane, decane etc…kerosene, heating oil, lubricating oilsWax, paraffin (face cream, crayons) asphalt
These are hydrocarbons found in crude oil.
Table 12.2
![Page 16: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/16.jpg)
16
Effect of Shape on IMF StrengthC5H12 C5H12
Which has the higher IMF? Why?
Fig. 12.5 p.531
![Page 17: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/17.jpg)
17
H-bonding is of particular significance to us
• It explains why H2O exists as a liquid rather than a gas.
• If we consider H2O only as a polar molecule, with only dipole forces, we would have expected it to be a gas, like H2S.
• Life would not exist as we know it if H2O were not a liquid!!!
![Page 18: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/18.jpg)
18
Significance of H-bonding• Enzymes are biological catalysts that keep
us alive. They work only if they maintain their special shapes.
• These shapes are often held in place by H-bonding.
• Example: Proteins are made of polypeptides, which are chains of amino acids.
• Hair protein is made of polypeptides exist in
a shape known as -helix.
![Page 19: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/19.jpg)
19
-Helix of Hair Protein
O of one amino acid is H-bonded to H of the fifth amino acid.
Result is the alpha-helix.
![Page 20: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/20.jpg)
20
-Helix of Hair Protein
H-bonding of O to H of the 5th amino acid below it.
![Page 21: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/21.jpg)
21
-Pleated Sheets of Silk
For silk, H-bonding holds strands of polypeptides in pleated sheets.
![Page 22: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/22.jpg)
22
What holds the 2 strands in DNA is purely
H-bonding!
Significance of H-bonding
Fig. 12.9 p.534
![Page 23: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/23.jpg)
23
Of the 3 IMF, if we compare molecules of comparable size (so that London forces are about the same for all)…
London forces < dipole forces < H-bonding
Relative Strengths of Intermolecular Forces
![Page 24: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/24.jpg)
24
How do they compare with covalent bonds?
Dipole forces are about 1 - 4% of the strength of covalent bonds.
H—Cl H—Cl H—Cl
Where are the dipole forces in the structures shown above? Where are the covalent bonds?
H-bonding is 5 - 10% of the strength of covalent bonds.
London forces vary in strength depending on size. A large molecule could have quite significant London forces just due to size, usually weaker than covalent bonds.
Relative Strengths of Intermolecular Forces
![Page 25: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/25.jpg)
25
Determination of Which IMF is in Effect
Dipole forces: exhibited by polar molecules
London forces: exhibited by all substances (polar and nonpolar molecules, ions, atoms)
H-bonding: exhibited by compounds containing H-F, H-O or H-N bonds
…..Ionic bond: exhibited by ionic compoundsCovalent bond: exhibited by molecular
compounds (made of all nonmetals) and polyatomic ions.
![Page 26: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/26.jpg)
26
Overall Picture: Relative Strengths of All Substances of comparable size
![Page 27: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/27.jpg)
27
Which of the following is not likely to have hydrogen bonding? Hint- sketch the molecules!
A. CH3CO2H
B. CH3OH
C. CH3OCH3
D. All of these exhibit hydrogen bonding
Ans. C is not likely to have H-bonding.
![Page 28: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/28.jpg)
28
Learning CheckIdentify the kinds of intermolecular forces present in the following compounds and then rank them in order of increasing boiling point: H2S CH3OH CBr4 Ne
C Br
Br
Br
Br
HS
H C O
H
HH
HNe
hydrogenbonding
& L.forces
London forces
London forces
dipoleforces
& L.forces MM=331.63 MM=20.18
Ne < CBr4 < H2S < CH3OHBp 189.5 oCBp 65 oCBp - 60 oC Bp -246oC
Ne < H2S < CH3OH < CBr4
![Page 29: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/29.jpg)
29
Arrange the following in terms of increasing strength of intermolecular forces:
CO2, CH4, HF
A. CO2 < CH4 < HFB. HF < CO2 < CH4
C. CH4 < HF < CO2
D. CH4 < CO2 < HFE. None of these
Ans. D. CH4 < CO2 < HF
How can we rate CH4 with CO2?How can we verify this is true? BP (CH4) = -161.5oC
BP (CO2) = -78oC
Compare molar masses.
![Page 30: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/30.jpg)
30
Effect of IMF on Physical Properties
• Compressibility: Gases are compressible, but not solids or liquids. Why?
• Surface tension:
Gases have no
surface tension.
Water has a high
surface tension.
WHY?
![Page 31: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/31.jpg)
31
What exactly is surface tension?It is the resistance of a substance for a
denser object from penetrating through the top layer of a liquid.
For example, a water insect can walk on water even though it is denser than water.
If you are careful, you can “float” paper clips on top of water.
![Page 32: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/32.jpg)
32
Surface TensionThere is a layer of molecules at the surface
that has a higher cohesive force forming a membrane of sorts...and this is due to the strong IMF of water molecules: hydrogen bonding.
At the surface, water molecules do not have any attraction to the air above it. Each molecule only have the IMF to the neighboring molecules to each side and below it. This increases the IMF giving a “sturdier” membrane at the surface.
![Page 33: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/33.jpg)
33
Surface TensionSurface tension is also described as the
resistance of a substance to increasing its surface area.
This is observed in water forming beads on a surface that is not attractive to the water:
This is the “wetting ability” of a liquid, which is also related to the strength of the IMF.
![Page 34: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/34.jpg)
34
Wetting of a surface by a liquid:"Wetting" refers to the spreading of a liquid
across a surface.In the lab, if water forms beads of droplets
on the sides of a glass container (such as a buret or grad cylinder) it means the glassware is dirty! Why?
If the glassware is clean, the water form a thin film across the surface and no droplets are observed.
Effect of IMF on Wetting Ability
![Page 35: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/35.jpg)
35
Wetting Ability/Surface TensionWetting ability is not totally dependent on just the IMF of a substance. It is also dependent on the IMF of the surface on which the substance is placed.
The top diagram shows an ink drop on an untreated film to which the ink has little attraction. The ink shows a high surface tension.
The bottom diagram shows a treated surface that is now
attractive to the ink. The surface tension is lowered & wetting ability has increased.
![Page 36: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/36.jpg)
36
Surface Tension & MeniscusYou should have learned that
water has a meniscus curving downwards. That is because water molecules are attracted to the glass and “creeps” up the sides.
Mercury on the other hand has a strong London force and no attraction to the Si-O bonds of the glass.
![Page 37: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/37.jpg)
37
Wetting Ability of WaterGlass contains a lot of Si-O bonds. Water form H-bonds to the O and therefore spreads out on the surface of the glass.
Dirty (greasy) glassware, however is coated with nonpolar grease. The water is not attracted to the grease and prefers to bonds to itself (H-bonding between water molecules). The result is they form water droplets on the surface (observed as beads).
![Page 38: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/38.jpg)
38Water on clean Water on dirtyglass surface. glass surface.
Layer of grease, which is nonpolar
![Page 39: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/39.jpg)
39
Wetting AbilitySurfactants
– substances that have polar and non-polar characteristics
– improve a liquid’s wetting properties – allow non-polar substances to dissolve in
polar solvents
Detergents contain surfactants, which causes water to be come “wetter” and allow detergents to spread out better on the surfaces we are trying to clean.
![Page 40: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/40.jpg)
40
Effect of IMF on Viscosity
Viscosity is the ease of flow of a liquid.
Honey is very viscous.
What do you think the effect of IMF is on the viscosity of a liquid?
CH3 C CH3
O
O C C OH H
H H
H H acetone ethylene glycol
Which is more viscous? and why?
![Page 41: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/41.jpg)
4141
Solubility• “Like dissolve like”- the more similar the
polarity of two substances, the greater their ability to interact with each other rather
• This explains why oil and water don’t mix: H2O molecules form very strong H-bonding to each other.
• Oil is made of mostly hydrocarbons (nonpolar) and are attracted to each other by London forces.
![Page 42: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/42.jpg)
42
SolubilityWhy does table salt dissolve well in water
but not in oil?
What are the attractive forces in table salt?
When table salt is added to water, what new forces are formed?
What kind of IMF are in oil?
What happens when table salt is added to oil?
![Page 43: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/43.jpg)
43
Role of IMF in How We Wash Dishes
This is the type of structure soap has:
The function of soap is to help dirt (grease) dissolve in the water. Think about how soap could get grease to dissolve in water.
![Page 44: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/44.jpg)
44
Effect of IMF on Evaporation
What do you think an increase in IMF would do to the rate of evaporation?
A.Increase the rate of evaporation
B.Decrease the rate of evaporation
Ans. B. Decrease the rate of evaporation.
![Page 45: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/45.jpg)
45
Understanding Evaporation
Evaporation depends on...
• Surface area
• Temperature
• Strength of IMF
![Page 46: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/46.jpg)
46
Understanding E of Evaporation
T2 is a higher temperature than T1
This is called “activation energy” (Ea) or “threshold energy.” It is the energy a molecule requires to break off all IMF and leave (as a gas).
Shaded area shows fraction of molecules with E higher than Ea
How does this tell you the effect of T on evaporation?
![Page 47: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/47.jpg)
47
Understanding E of Evaporation
At a higher temperature, more molecules have beyond the activation energy and they break off all IMF to form a gas.
This means that the liquid would evaporate faster at a higher temperature.
![Page 48: Dr. C. Yau Fall 2013](https://reader035.fdocuments.us/reader035/viewer/2022062222/568159a1550346895dc6f3c9/html5/thumbnails/48.jpg)
48
Understanding E of Evaporation
This kind of graph is important to understand. You will see it again in later chapters. Be able to draw the 2 curves and label them.
When T is increased, what happens to the curve?
Peak moves to higher KE & curve flattens out.