Revised - 10/23/2018

Toll Free: 1-800-465-0234Fax: 905-607-0234

Email: service@omcan.comwww.omcan.com

Dough DividerItem 10839

Instruction Manual

2

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

-------------------------------------------------------------------------- 5

--------------------------------------------------------------------------------------------- 6

------------------------------------------------------------------------------------- 6 - 7

------------------------------------------------------------------------------- 8 - 9

------------------------------------------------------------------------------------------------- 10

---------------------------------------------------------------------------- 11

Table of Contents

Section

General Information

Safety and Warranty

Technical Specifications

Operation

Maintenance

Parts Breakdown

Notes

Warranty Registration

Item 10839

3

General InformationOmcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the equipment if servicing or returning of the machine is required.---------------------------------------------------------------------------------------------------------------------------------------------------Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de plus de 18 ans, saine d’esprit, et pas sous l’influence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modification de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage n’est visible sur l’emballage externe, ouvrez le carton afin de s’assurer que tous les éléments commandés sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli par un tiers transporteur.

4

Safety and Warranty

General Information

MAKE SURE THE MACHINE IS ON A FLAT AND STABLE SURFACE BEFORE OPERATING.

SAFETY

The Dough Divider is simple to operate and easy to clean. Maintenance, cleaning or any other service on the machine must be made only by qualified persons.

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.---------------------------------------------------------------------------------------------------------------------------------------------------Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona mayor de 18 años, en su sano juicio y no bajo alguna influencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modificación a la máquina anúla la garantía y puede causar daños a las personas usando la máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron a recoger por terceros.

Antes de utilizar cualquier equipo, siempre leer y familiarizarse con todas las instrucciones de operación y seguridad.

Omcan quisiera darles las gracias por la compra de esta máquina. Es de la máxima importancia para guardar estas instrucciones para referencias en el futuro. También guarde la caja original y el embalaje para envío del equipo si el mantenimiento o la devolución de la máquina es necesaria.

5

Technical Specifications

Safety and WarrantyTo avoid accidents respect the following instructions:• Never use any instruments which are not part of the machine to help operating it.• After removing any safety parts of the equipment, replace them and make sure all the safety items are

properly positioned.• Keep your hands away from sharp parts.

6 MONTHS PARTS AND LABOR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components (cardboard, polyethylene, and others) are classified as normal solid urban waste and can therefore be disposed of without difficulty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Item Number 10839Production 30 rollsMin. Load Capacity 2.2 lbs. / 1 kgs.Max. Load Capacity 6.6 lbs. / 3 kgs.Dimensions 17.7” x 17.7” x 43.5” / 450 x 450 x 1105mm

6

Operation

Maintenance

OPERATION PROCEDURE

IMPORTANT: Make sure that all the components are properly positioned before using the equipment.

INITIALLY CHECK IF THE DOUGH DIVIDER IS FIRM ON ITS POSITION.

IMPORTANT: Do not touch the Blade while it is moving, in any circumstances.

1. Dough should be evenly spread in the pan.2. Put the pan in the machine. Move the lever down until dough is fully compressed.3. This will move the arm blade down to cut the dough. Then move the lever up to remove the pan.4. If dough gets stuck in the blades, move the lever down again with the blocker at the closed position, until

the dough releases itself.5. Remove the pan from the machine to take out the dough.

CLEANING

MACHINE CLEANING PROCEDURE:• Remove the Tray.• Clean all the parts with a wet cloth.• Follow the inverse sequence to reassemble parts.

CAUTIONS WITH STAINLESS STEEL

The Stainless Steel may present rust signs, which ARE ALWAYS CAUSED BY EXTERNAL AGENTS, especially when the cleaning or sanitization is not constant and appropriate.

The Stainless Steel resistance towards corrosion is mainly due to the presence of chrome, which in contact with oxygen allows the formation of a very thin protective coat. This protective coat is formed through the whole surface of the steel, blocking the action of external corrosive agents.

When the protective coat is broken, the corrosion process begins, being possible to avoid it by means of constant and adequate cleaning.

Cleaning must always be done immediately after using the equipment. For such end, use water, neutral soap or detergent, and clean the equipment with a soft cloth or a nylon sponge. Then rinse it with plain running water, and dry immediately with a soft cloth, this way avoiding humidity on surfaces and especially on gaps.

The rinsing and drying processes are extremely important to prevent stains and corrosion from arising.

7

MaintenanceIMPORTANT: Acid solutions, salty solutions, disinfectants and some sterilizing solutions (hypochlorites, tetravalent ammonia salts, iodine compounds, nitric acid and others), must be AVOIDED, once it cannot remain for long in contact with the stainless steel.

These substances attack the stainless steel due to the CHLORINE on its composition, causing corrosion spots (pitting).

Even detergents used in domestic cleaning must not remain in contact with the stainless steel longer than the necessary, being mandatory to remove it with plain water and then dry the surface completely.

USE OF ABRASIVES:Sponges or steel wool and carbon steel brushes, besides scratching the surface and compromising the stainless steel protection, leave particles that rust and react contaminating the stainless steel. That is why such products must not be used for cleaning and sanitization. Scraping made with sharp instruments or similar must also be avoided.

MAIN SUBSTANCES THAT CAUSE STAINLESS STEEL CORROSION:Dust, grease, acid solutions such as vinegar, fruit juices, etc., saltern solutions (brine), blood, detergents (except for the neutral ones), common steel particles, residue of sponges or common steel wool, and also other abrasives.

REFERENCE

Item Number Model Number Description Manufacturer Model Number10839 - Dough Divider DMS30

8

Parts BreakdownItem 10839

9

Item No. Description Position Item No. Description Position Item No. Description Position

38109 Skymsen Logo Small for DMS30 00047.7 62781 Gear Dp88 M4 (White) PC for DMS30 21101.0 62794 Base Pin PC for DMS30 21491.4

62771 Sphere C / Thread 3/8” PC for DMS30 01643.8 62782 Gear Pin for DMS30 21104.4 62795 PFS M8x20 Din 912 Fosf. for DMS30 21536.8

30281 Screw M6x12 DIN 933 ZB for DMS30 03084.8 62783 Elastic Ring 15 DIN 6799 PC for DMS30 21105.2 62796 CS Leather Grande (White) PC for DMS30 21721.2

38180 Screw Nut M6 DIN 934 ZB for DMS30 03099.6 62784 CS Divider Sheet for DMS30 21106.0 62797 Against Weight DMS (White) PC for DMS30 21722.0

27694 Ring 10x1 DIN 471 for DMS30 03115.1 62785 Divisor 4 (White) PC for DMS30 21118.4 62798 PC Backpack for DMS30 21773.5

27695 Allen Screw M6x8 for DMS30 03188.7 27712 Ring 10 DIN 6799 for DMS30 21127.3 62799 CS PC Shape for DMS30 21855.3

38561 Screw M8x20 for DMS30 04001.0 62786 Divisor 16 (White) PC for DMS30 21128.1 62800 Fashion Pin PC for DMS30 21861.8

62775 PFS M6x20 Din 912 FOSF. for DMS30 09196.0 62787 Divisor 10 (White) for DMS30 21130.3 62801 Skypan Logo PQ.ADES. for DMS30 23864.3

38296 Washer L A10,5 ZB for DMS30 09338.6 62788 CS Escape Plate (White) PC for DMS30 21132.0 62802 Left Secondary Axle PC for DMS30 24326.4

62776 PFS M10x25 Din 933 ZB for DMS30 12348.0 62789 Mola for DMS30 21136.2 62803 Secondary Axle Right PC for DMS30 24329.9

62777 PFS M5x8 Din 916 FOSF. for DMS30 20650.4 62790 Joint Pin PC for DMS30 21138.9 62804 CS Sheet PC for DMS30 36946.2

62778 Base (White) for DMS30 21095.1 62791 Plate Trava DMS (White) PC for DMS30 21140.0 62805 PC Sheet Spring for DMS30 36948.9

62779 Head Guide for DMS30 21097.8 62792 Sheet Pin Lock PC for DMS30 21142.7 62806 PC Joining Pin for DMS30 36949.7

62780 Main Axle for DMS30 21100.1 62793 Pin Elast.14x55 DIN EN 28752 PC for DMS30 21144.3 62807 Divisor 10 (White) for DMS30 51758.5

Parts BreakdownItem 10839

10

Notes

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

11

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la carte au niveau de la perforation, puis l’envoyer à l’adresse spécifié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting:

OMCANPRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: service@omcan.com

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Por correo en CanadáPour postale au CanadaFor mailing in Canada

Por correo en los EE.UU.Pour diffusion aux États-Unis

For mailing in the US

OMCANPRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 5,000 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à nos ventes locales qualifiées et des représentants de service qui offrent un accès facile à plus de 5000 produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 5,000 productos con origen a nivel mundial.