Double Sing Bench

1
Deluxe 1WB series Manufactured in High Grade 304 Stainless Steel Good Performance on Anti-Rust & Anti-Acid Full 1.2mm Thickness Stainless Steel Sheet Polished to Hairline Finish Top and Undershelf Reinforced with Channel Frame Special Material Reinforcement Underlaid in Top Knockdown-able Design, Supplied Flat-Pack Easy to Assemble Adjustable Leg and Undershelf Standardlised Accessories Feature: Double Sine Bench CEA Copyright 2008 TONGHENG HOTEL EQUIPMENT CO, LTD. Specification subject to change without notice. C CATERING EQUIPMENT TONGHENG HOTEL EQUIPMENT CO, LTD TONGHENG HOTEL EQUIPMENT TRADING LTD +8675783389428 +8675783387978 [email protected] http://www.tongheng.com.hk SIZE &DIMENDION: Product Code Weight Cubic Meter Quantity Per 20'FCL 610 WIDE 700 WIDE TH-1DSB-6.1-1200 TH-1DSB-6.1-1500 TH-1DSB-6.1-1800 TH-1DSB-6.1-2100 TH-1DSB-6.1-2400 1200x610x900 1500x610x900 1800x610x900 2100x610x900 2400x610x900 1200x700x900 1500x700x900 1800x700x900 2100x700x900 2400x700x900 55 67 78 90 100 57 67 78 90 100 0.46 0.57 0.68 0.78 0.89 0.52 0.64 0.77 0.89 1.01 59 48 40 34 30 52 42 35 30 27 TH-1DSB-7-1200 TH-1DSB-7-1500 TH-1DSB-7-1800 TH-1DSB-7-2100 TH-1DSB-7-2400 900 227 1298 Pipe Thimble 48*3.0MM Pipe Thimble 42*1.5MM 30 50 150 300 360 498 250 SPECIFICATION & DETAILS: TOP 1.2mm 304 stainless steel sheet. 150mm height splash back with 45 bevelled edge. 50mm turn down on 4 sides. Box channel reinforcements around the edge. Special "U"channels on tables for rigidity, up to 5 channels on tables over 2400mm in length. 15mm special material underlaid between table top and channels for reinforcement and soundproofing. 15mm height 45° bevelled wet edge. Opening available on left or right. Choice of 610mm and 700mm bench depths. SINK BOWLS Fully welded and pollished 450mm(H)x450mm(L)x300mm(D) sink bowls. Sink Bowl available in left,right or center of the bench. Choice of Two hole sizes for 3" or 3 " waste outlet. UNDER SHELF 1.2mm 304 stainless steel sheet with stainless steel box channels underlaied for rigidity. Largest undershelf design in the industry. Adjustable shelf for products with different height. 50mm long pipe thimble provide maximum of stability. 1.0mm Stainless Steel 304 25mm( ) tublar undershelf LEGS 1.2mm 304 stainless steel tube, good performance for rust-resistance. Complete with 3cm adjustable stainless steel feet. Tables over 1800mm in length are shipped with six legs. Easily adapt to lockable casters to make tables mobile. The undershelf is designed as pipe shelf, for better air-dry and prevent accumulation of stagnant water CONSTRUCTION Hairline finish for ease of clean and distinctive look. Table and undershelf hemmed to eliminate cuts from rough edges. Heliarc welded construction creates uniform, rock-solid unit. Gussets fully welded for extra rigidity. DESIGN ADVANTAGE Standardised accessories for customisation. Specially design for quick and simple assembly. Supplied flat packed for ease of transportation. ° ½ Ø Size (LxWxH)

description

Double Sing Bench

Transcript of Double Sing Bench

Deluxe 1WB series

■ Manufactured in High Grade 304 Stainless Steel

■ Good Performance on Anti-Rust & Anti-Acid

■ Full 1.2mm Thickness Stainless Steel Sheet

■ Polished to Hairline Finish

■ Top and Undershelf Reinforced with Channel Frame

■ Special Material Reinforcement Underlaid in Top

■ Knockdown-able Design, Supplied Flat-Pack

■ Easy to Assemble

■ Adjustable Leg and Undershelf

■ Standardlised Accessories

Feature:

Double Sine Bench CEA

Copyright 2008 TONGHENG HOTEL EQUIPMENT CO, LTD. Specification subject to change without notice. C

CATERING EQUIPMENT

TONGHENG HOTEL EQUIPMENT CO, LTD

TONGHENG HOTEL EQUIPMENT TRADING LTD+86 757 83389428

+86 757 83387978

[email protected]

http://www.tongheng.com.hk

SIZE&DIMENDION:

Product Code Weight Cubic Meter

QuantityPer 20'FCL

610 WIDE

700 WIDE

TH-1DSB-6.1-1200TH-1DSB-6.1-1500TH-1DSB-6.1-1800TH-1DSB-6.1-2100TH-1DSB-6.1-2400

1200x610x9001500x610x9001800x610x9002100x 610x9002400x610x900

1200x700x9001500x700x9001800x700x9002100x700x9002400x700x900

55677890100

57677890100

0.460.570.680.780.89

0.520.640.770.891.01

5948403430

5242353027

TH-1DSB-7-1200TH-1DSB-7-1500TH-1DSB-7-1800TH-1DSB-7-2100TH-1DSB-7-2400

900

227

1298

Pipe Thimble48*3.0MM

Pipe Thimble42*1.5MM

30

50

150

300

360

498

250

SPECIFICATION & DETAILS:TOP● 1.2mm 304 stainless steel sheet.

● 150mm height splash back with 45 bevelled edge.● 50mm turn down on 4 sides.● Box channel reinforcements around the edge.● Special "U"channels on tables for rigidity, up to 5 channels on tables over 2400mm in length.● 15mm special material underlaid between table top and channels for reinforcement and soundproofing.● 15mm height 45° bevelled wet edge.● Opening available on left or right.● Choice of 610mm and 700mm bench depths.

SINK BOWLS● Fully welded and pollished 450mm(H)x450mm(L)x300mm(D) sink bowls. ● Sink Bowl available in left,right or center of the bench.

● Choice of Two hole sizes for 3" or 3 " waste outlet.

UNDER SHELF● 1.2mm 304 stainless steel sheet with stainless steel box channels underlaied for rigidity.● Largest undershelf design in the industry. Adjustable shelf for products with different height.● 50mm long pipe thimble provide maximum of stability.● 1.0mm Stainless Steel 304 25mm( ) tublar undershelf

LEGS● 1.2mm 304 stainless steel tube, good performance for rust-resistance.● Complete with 3cm adjustable stainless steel feet.● Tables over 1800mm in length are shipped with six legs.● Easily adapt to lockable casters to make tables mobile.● The undershelf is designed as pipe shelf, for better air-dry and prevent accumulation of stagnant water

CONSTRUCTION● Hairline finish for ease of clean and distinctive look. ● Table and undershelf hemmed to eliminate cuts from rough edges.● Heliarc welded construction creates uniform, rock-solid unit.● Gussets fully welded for extra rigidity.

DESIGN ADVANTAGE● Standardised accessories for customisation.● Specially design for quick and simple assembly.● Supplied flat packed for ease of transportation.

°

½

Ø

Size(LxWxH)