Surface GaugeUsed for marking out lines parallel to a true edge or groove, and also to mark the centre of round bars. Machined base, two pillars, a double ended scriber and an adjustable attachment for holding scribers up to 1/4” diameter on to the pillar. The base has a machined V groove for use on pipes and round bar and two frictionally held pins which are used as a guide when sliding along the true edge or groove. The angle of the pillar can be finely adjusted with the use of a knurled thumb screw. Supplied with 2 pillars.

CODE Pilla Height (mm) PER/PCOB-SG4300 230 & 305mm RM

Double Ended ScriberUsed for the marking out of fine lines on metals. Manufactured from hardened andUsed for the marking out of fine lines on metals. Manufactured from hardened and foraccurate marking. Available with a chisel point, pocket type, machinist’s standard type,double ended, which are mainly used in conjunction with surface gauges.

CODE SIZE PER/PCOB-1591 7"/180mm RM

Feeler GaugesQuality industrial with hardened and polished taper blades, enclosed in a steel case.Blades are clearly marked for easy identification.Metric 13 Blade:- .05, .1, .15, .2, .25, .3, .4, .5, .6, .7, .8, .9 & 1mm.20 Blade:- .05, .1, .15, .2, .25, .3, .35, .4, .45, .5, .55, .6, .65, .7, .75, .8, .85, 9, .95 & 1mm.AF 13 Blade:- CODE No.of Blades PER/PCOB-188-13M 13 metric RMOB-188-20M 20 metricOB-188-13AF 13 AFOB-188-20AF 20 AF

Heavy Duty WrenchesHeavy duty pattern. Drop forged, single piece body.All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipesand nuts. Jaws are serrated in the opposite direction to ensure a secure grip. Used mainlyin the plumbing industry for gripping pipes and nuts. Cast iron frame, drop forged handlehandles and jaws.CODE SIZE PER/PCOB75-12 12"/300MM RMOB75-14 14"/350MMOB75-18 18"/450MMOB75-24 24"/600MMOB75-36 36"/900MM

ALUMINIUM PIPE WRENCHCODE SIZE PER/PCOB76-12 12"/300MM RMOB76-14 14"/350MMOB76-18 18"/450MMOB76-24 24"/600MMOB76-36 36"/900MM

1

Industrial Quality Air Hose

CODE SIZE THICK PER/PCOB‐140     1/4ʹʹ (6.35mm) X 30M 2MMOB‐516     5/16ʹʹ (7.94mm) X 30M  2MMOB‐380     3/8ʹʹ (9.5mm) X 30M  2.5MMOB‐380‐1     3/8ʹʹ (9.5mm) X 30M  2MMOB‐120     1/2ʹʹ (12.7mm) X 30M  2.5MMOB‐580     5/8ʹʹ (15.87mm) X 30M 3MMOB‐340     3/4ʹʹ (19mm) X 30M  3MMOB‐100     1ʹʹ (25.4mm) X 30M 3.5MM

Blow GunManufactured from bright nickel chrome plated die cast alloy for a long trouble free life. Complete with 3" long nozzle. 1/4” NPT Air inlet. Normal working pressure with safety nozzle intact is 90psi. CODE SIZE PER/PCOB101-2 125MM/200MM RM

SCRAPERS -STAINLESS STEELHeavy duty, tempered flexible stainless steel blades and polishedwood handles. Polished sharp blade for removing paint and wall coverings.CODE SIZE PER/PCOB-SM025 1"/25mm - Mirror Polish RMOB-SM038 1-1/2"/38mm - Mirror PolishOB-SS050 2"/50MM Stainless SteelOB-SS063 2-1/2"/63mm Stainless SteelOB-SS075 3"/75MM Stainless SteelOB-SS100 4"/100MM Stainless SteelOB-SS125 5"/125MM Stainless SteelOB-SS150 6"/150MM Stainless Steel

Utility KnifeA range of knives with contoured moulded grips and steel slides that prevent blade slippage or case splitting and gives the knife a smooth action. Snap-off blade kniveshave a blade locking mechanism in the thumb slide. CODE SIZE PER/PCOB-UK13019 130MM X 19MM BLADE

Utility KnifeA range of knives with contoured moulded grips and steel slides that prevent blade slippage or case splitting and gives the knife a smooth action. Snap-off blade kniveshave a blade locking mechanism in the thumb slide. Replacement blades availableon request.CODE SIZE PER/PCOB-UK1309 130MM X 9MM BLADE

2

6.35mm bore - 250PSI 9.50mm bore - 150PSI, 12.7mm bore - 130PSI19.0mm bore - 100PSI. Supplied in 30mtr (100ft) reels.

Maximum pressure ratings:

Multi-purpose flexible clear PVC hose reinforced with a polyester fibre braid. Usedin pneumatic airline systems, crop spraying, transportation of gases and liquids,decanting of acids, salts and many other chemicals. Also fully approved forfood contact applications. Operating temperature range of -20°C to +60°C.

Piston Ring Compressors

CODE SIZE(MM) PER/PCOBCL-314 57-125 (80MM DEPTH) RMOBCL-315 90-175 (80MM DEPTH)OBCL-316 90-175 (100MM DEPTH)OBCL-317 90-175 (165MM DEPTH)

HOLLOW PUNCH CODE SIZE(MM) PER/PCOB0286-3 1/8"(3MM) RMOB0286-4 5/32''(4MM)OB0286-5 3/16"(5MM)OB0286-5.5 7/32"(5.5MM)OB0286-6 1/4"6MM)OB0286-8 5/16"(8MM)OB0286-10 3/8"(10MM)OB0286-11 7/16"(11MM)OB0286-12 1/2"(12MM)OB0286-14 9/16"(14MM)OB0286-16 5/8"(16MM)OB0286-19 3/4"(19MM)OB0286-22 7/8''(22MM)OB0286-25 1"(25MM)OB0286-32 1-1/4"(32MM)

Hollow Punch SetsManufactured from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper.CODE SIZE(MM) PER/PCOB0286-S160 5,6,8,10,11,12MM

OB0286-S165 6,8,10,12,16,19MM

Heavy Duty Lever Action RiveterProduces strong, vibration proof joints effortlessly. Replaces screws, bolts, ordinary rivets, brazing, soldering and welding. Moulded comfort grip. Long nose design, ideal for use in recessed areas. With enamelled steel body with storage forfour nozzles and quick change wrench. 260mm overall length.CODE SIZE(MM) PER/PCOB-69646 3/32",1/8",5/16",3/16"

2.4MM, 3.2MM, 4MM, 4.8MM

3

OB-CL314 Suitable for passenger car vehicle engines.

The compressor gently compresses the piston rings into position reducing therisk of damage to components during installation. Key operated with ratchetmechanism and safety valve for combining safe rapid compression withpositive control. Made from tempered spring steel complete with steel key.

OB-CL317 Suitable for heavy commercial vehicle engines.OB-CL315 Suitable for car/light commercial vehicle engines.

6 PCE PER SET

6 PCE PER SET

HOLE SAW - HIGH SPEED STEELCODE SIZE PER/PCOB-112 12MMOB-113 13MMOB-116 16MMOB-117 17MMOB-118 18MMOB-119 19MMOB-120 20MMOB-122 22MMOB-124 24MMOB-125 25MMOB-126 26MMOB-128 28MMOB-130 30MMOB-132 32MMOB-135 35MMOB-138 38MMOB-140 40MMOB-145 45MMOB-148 48MMOB-150 50MMOB-152 52MMOB-154 54MMOB-160 60MMOB-165 65MMOB-170 70MMOB-175 75MM

Needle File SetSupplied in PVC Wallet. Manufactured to BS 498:1990. Cut 2.Contents: Warding, Flat, half round, three square, round and square. CODE SIZE PER/PCOB-NF0616 16CM X 6PCS RM

Diamond Needle File Set16cm 150 grain (medium grade). With tapered handles, supplied in PVC wallet.Contents: Flat, half round, three square, round and square. CODE SIZE PER/PCOB-DF514 14CM X 5PCS RMOB-DF516 16CM X 5PCSOB-DF518 18CM X 5PCSOB-DF1018 18CM X 10PCS

Engineers Second Cut File SetsEach set contains: 1 off each Flat, round, half-round three-square & square.With plastic handles, supplied in PVC wallet. 5 pce setCODE SIZE PER/PCOB-FS150 150MM(6") X 5PCS RMOB-FS200 200MM(8") X 5PCSOB-FS250 250MM(10")X 5PCS

4

FLAT FILECODE SIZE (mm) CUT PER/PCOB246-1X150 150MM / BASTARD RMOB246-2X150 150MM / SECONDOB246-1X200 200MM / BASTARDOB246-2X200 200MM / SECONDOB246-1X250 250MM / BASTARDOB246-2X250 250MM / SECONDOB246-1X300 300MM / BASTARDOB246-2X300 300MM / SECOND

HALF ROUND FILECODE SIZE (mm) CUT PER/PCOB247-1X150 150MM / BASTARD RMOB247-2X150 150MM / SECONDOB247-1X200 200MM / BASTARDOB247-2X200 200MM / SECONDOB247-1X250 250MM / BASTARDOB247-2X250 250MM / SECONDOB247-1X300 300MM / BASTARDOB247-2X300 300MM / SECOND

ROUND FILECODE SIZE (mm) CUT PER/PCOB248-1X150 150MM / BASTARD RMOB248-2X150 150MM / SECONDOB248-1X200 200MM / BASTARDOB248-2X200 200MM / SECONDOB248-1X250 250MM / BASTARDOB248-2X250 250MM / SECONDOB248-1X300 300MM / BASTARDOB248-2X300 300MM / SECOND

THREE SQUARE FILECODE SIZE (mm) CUT PER/PCOB207-1X150 150MM / BASTARD RMOB207-2X150 150MM / SECONDOB207-1X200 200MM / BASTARDOB207-2X200 200MM / SECONDOB207-1X250 250MM / BASTARDOB207-2X250 250MM / SECONDOB207-1X300 300MM / BASTARDOB207-2X300 300MM / SECOND

SQUARE FILECODE SIZE (mm) CUT PER/PCOB208-1X150 150MM / BASTARD RMOB208-2X150 150MM / SECONDOB208-1X200 200MM / BASTARDOB208-2X200 200MM / SECONDOB208-1X250 250MM / BASTARDOB208-2X250 250MM / SECONDOB208-1X300 300MM / BASTARDOB208-2X300 300MM / SECOND

5

___________________________________________________________________________________________

________________________________________________________________________________________

6

HYDRAULIC PIPE BENDER

OBPH-3E &OBPH-4E

OB-3M

Features ● Simple pipe bending with clean finish ● Precise pipe bending to any required angle up to 90˚ ● Portable type - Be used in any Location ● Direct coupling construction makes for easy operation

Use ● Pipe works : Water service, Gas,Electricity, Shipbuilding, Rolling stocks,Vehicles,Petroleum, Engineering, Architecture, Furniture, Air-conditiong, and other plants

● All types of tools for factory piping installation and repair. ( Household tools) Specifications :

Model Operation Bending capacity Attached shoes Attached

parts Angle Gross weight

List Price RM (EC + C)

OB-3M Manual S.G.P. 1/2" - 3" S.G.P. 1/2" - 3" Pivot Shoes Stand

0 - 90º 140 kg

OBH-3E 2HP – 415V S.G.P. 1/2" - 3" S.G.P. 1/2" - 3" Pivot Shoes 0 - 90º 250 kg

OBPH-4E 2HP – 415V S.G.P. 1/2" - 4" S.G.P. 1/2" - 4" Pivot Shoes 0 - 90º 280 kg

BENDING SHOE

Model / Size List Price RM (EC + C) S.G.P 1/2" S.G.P 3/4" S.G.P 1" S.G.P 1 1/4" S.G.P 1 1/2" S.G.P 2" S.G.P 2 1/2" S.G.P 3" Long Shoe 2 1/2" Long Shoe 3"

Pivot Shoe

F CLAMPManufactured from all medium heat treated carbon steel with nickel and chromeplated finish. With a straight wooden handle for easy clampingCODE SIZE PER/PCOB-FC150 80 X 150MM/6" RMOB-FC200 100 X 200MM/8"OB-FC250 100 X 250MM/10"OB-FC300 100 X 300MM/12"OB-FC350 100 X 350MM/14"OB-FC450 100 X 450MM/18"OB-FC600 120 X 600MM/24"OB-FC900 120 X 900MM/36"OB-FC1200 120 X 1200MM/48"

ALUMINIUM QUICK ACTION CLAMPCODE SIZE PER/PCOB-AC234 24'' RMOB-AC236 36''OB-AC248 48''

T-BAR CLAMPUsed for a wide range of long reach clamping applications. SG ductile cast iron heads and slides, bars are manufactured from bright drawnsteel. Main screw and handles are made from high grade steel.CODE SIZE PER/PCOB-TC075 3' RMOB-TC100 4'OB-TC125 5'OB-TC150 6'OB-TC200 8'

G CLAMPS Engineers clamps with cast anti-twist ribbed frame. For tradesmen, engineering, woodworkers etc.CODE SIZE PER/PCOB-GC050 2'' RMOB-GC075 3''OB-GC100 4''OB-GC125 5''OB-GC150 6''OB-GC200 8''OB-GC250 10''OB-GC300 12''

Engineers VicesManufactured from the highest quality castings with precision cut screw mechanisms and precision machined jaws. Suitable for workshop, automotive andengineering use.CODE JAW WIDTH SIZE PER/PCOB-EV1030 3" (100MM OPENING)OB-EV1040 4" (140MM OPENING)OB-EV1050 5" (170MM OPENING)OB-EV1060 6" (190MM OPENING)OB-EV1080 8" (250MM OPENING)

7

3-JAW MECHANICAL PULLERUsed for the removal of gears, ball races, bearings, pulleys and sprockets from adrive shaft. With reach capacities of 75mm, 100mm, 150mm & 200mm. All sizeshave double ended, adjustable, reversible legs and can be used for internal andexternal applications. CODE SIZE-SPREAD PER/PCOB320-075 40-75MM RMOB320-100 50-100MMOB320-150 60-150MMOB320-200 80-200MMOB320-250 100-250MMOB320-300 120-300MM

2-JAW MECHANICAL PULLERCODE SIZE-SPREAD PER/PCOB172-075 40-75MM RMOB172-100 50-100MMOB172-150 60-150MMOB172-200 80-200MM

Coil Spring Compressor SetsHardened steel screws & cast steel claws. 2 legged Central hexagonal drivewith wrap over coil claws • Can be reversed for spreadingCODE SIZE-OPENING PER/PCOB184-200 200MM RMOB184-300 300MMOB184-400 400MM

Valve and Piston Ring CompressorsDesigned for use on production lines as well as in the Automotive workshop. Able to cope with occasional commercial use. Manufactured from bright nickel plated steel with PVC cushion grips.CODE SIZE-OPENING PER/PCOB230-S 75-230mm/Straight RMOB230-45 45-230mm/Straight/CurvedOB230-75 75-240mm Overhead Cam

Cold Chisels - Chrome Vanadium SteelManufactured from high quality octagonal chrome vanadium steel section with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.CODE SIZE-SPREAD PER/PCOB262-125 3/8''X5/16''X5''(125MM)OB262-150 1/2''X3/8''X6'' (150MM)OB262-175 5/8''X1/2''X7'' (175MM)OB262-200 3/4''X5/8''X8'' (200MM)OB262-202 1''X7/8''X8'' (200MM)

8

AXESuitable for felling small trees, chopping off branches and splitting logs. High quality toolsteel blade, polished and lacquered.

KITCHEN HATCHET W/PLASTIC HDLCODE SIZE PER/PCOB86-AA700 700GM RM

KITCHEN HATCHET W/WOODEN HDLCODE SIZE PER/PCOB86-AB600 600GM RMOB86-AB700 700GMOB86-AB800 800GM

FELLING AXE W/PLASTIC HDLCODE SIZE PER/PCOB86-AC115 1-1/2 LBS RMOB86-AC120 2 LBS

FELLING AXE W/WOODEN HDLCODE SIZE PER/PCOB86-AD110 1 LBS RMOB86-AD115 1-1/2 LBS OB86-AD120 2 LBS OB86-AD125 2-1/2 LBS OB86-AD130 3 LBS OB86-AD140 4 LBS

AXE HEADCODE SIZE PER/PCOB86-AH150 1-1/2 LBS OB86-AH200 2 LBS OB86-AH250 2-1/2 LBS OB86-AH300 3 LBS OB86-AH400 4 LBS

PICK AXE W/FIBREGLASS HANDLECODE SIZE PER/PCOB84-PA550 5-1/2LB RM

PICK AXE HEADCODE SIZE PER/PC

OB84-PA555 5-1/2LB RM

MANURE FORKCODE SIZE PER/PCOB84-MF104 4 TEETH RM

9

MEASURING TAPETough plastic case with a slide action blade lock. Locking spring assisted blade return. Rivetted metal end hook. Steel belt clip & wrist strap. Blades and hooks are

heavy gauge and corrosion resistant. Self-aligning hooks ensure accuracy for internal and external measurements.

CODE SIZE PER/PCOB-MT0350 3.5M/12FT X 12MM RMOB-MT0500 5.0M/16FT X 19MMOB-MT0750 7.5M/12FT X 25MM

MEASURING TAPEHIGH VISIBILITY YELLOW KENLOCK -INDUSTRIAL QUALITY

CODE SIZE PER/PCOB-MT1350 3.5M/12FTX16MM RMOB-MT1500 5.0M/16FTX19MMOB-MT1750 7.5M/25FTX25MM

Long Tape Measures - ABS Hi-Vis Case Flush fitting winding handle with stainless steel hook. The fibre glass tape is a hard wearing material which gives excellent resistance to moisture, vinyl coated with heatsealed markings give longer life. With ½”, 1”, mm and cm graduations

CODE SIZE PER/PCOB-LT1033 10M/33FTX13MM RMOB-LT2066 20M/66FTX13MMOB-LT3010 30M/100FTX13MMOB-LT5016 50M/165FTX13MM

Long Tape MeasuresPolyester coated steel blade with steel end hook housed in an ABS plastic case complete with rewind handle and wrist strap. 20 Newtons tension limit.Graduations: Metric: 1mm, numbered every 10mm.Imperial: 1/16”, numbered every inch.

CODE SIZE PER/PCOB-LT3010S 30M/100FTX13MM RMOB-LT5016S 50M/165FTX13MM

10

BOLT CUTTER WITH TUBULAR HANDLECompound action magnifies the pressure applied to the handle. Ensures aconcentration of force between the jaws.Centre Cut Manufactured from drop forged hardened carbon steel suitable for round and flat sections. With adjustable arms. With cushion grips. 300mm model has cast handles - all other sizes have tubular handles for maximumstrength combined with low weight.

CODE SIZE PER/PCOB-BC008 8" RMOB-BC012 12"OB-BC014 14"OB-BC018 18"OB-BC024 24"OB-BC030 30"OB-BC036 36" OB-BC042 42"OB-BC048 48"

CABLE CUTTECODE SIZE PER/PC

OB-RC109 28" RMOB-RC109A 24”

Multi-Purpose Crimping Plier KitMade from heavy gauge carbon steel heat treated to HRa 65/70. Chemically blackened with cushion grip handles for operator comfort.

Kit comes complete with 100 assorted insulated and non-insulated terminals in a neat plastic see through box.

CODE SIZE PER/PCOB466 PLIER ONLY RMOB466K PLIER WITH 100 PC KIT

Carpenter’s PincersIdeal for the easy removal of tacks and nails. Bonded vinyl coated handle, double polished head and joint with induction hardened cutting edges.

CODE SIZE PER/PCOB321-150 150MM(6") RMOB321-200 200MM(8")

Slip Joint Waterpump PliersChrome vanadium steel with bonded vinyl coated handles. Satin finish head and joint. Hardened steel, ground jaws, sliding pivot joint for a wide range of jaw openings. Serrated parallel and curved jaws.

CODE SIZE PER/PCOB132-250 250MM/10" RM

Groove Joint Waterpump PliersChrome vanadium with a satin finish and textured grip handles. Hardened chromed steel jaws. Sliding pivot joint allows the widest range of jaw openings.The handles cannot be closed together, preventing trapped fingers.

CODE SIZE PER/PCOB131-250 250MM/10" RMOB131-300 250MM/12"

11

Engineers Ball Pein Hammer Manufactured from finest quality

drop forged steel, hardened and tempered with ground & polished heads.

CODE SIZE PER/PCOB1670-050 1/2 LBS RMOB1670-075 3/4 LBS OB1670-100 1 LBSOB1670-150 1-1/2 LBSOB1670-200 2 LBSOB1670-250 2-1/2 LBSOB1670-300 3 LBS

CODE SIZE PER/PCOB1670-F100 1 LBS RMOB1670-F150 1-1/2 LBSOB1670-F200 2 LBSOB1670-F250 2-1/2 LBS

COPPER HAMMERCODE SIZE PER/PC

OB66-CP110 1 LBS RMOB66-CP115 1-1/2 LBSOB66-CP120 2 LBSOB66-CP130 3 LBSOB66-CP140 4 LBSOB66-CP160 6 LBSOB66-CP180 8 LBSOB66-CP200 10 LBS

RUBBER MALLETSoft faced mallet for use where steel hammers would mark the surface

CODE SIZE PER/PCOB1620-45 8 OZ RMOB1620-53 16 OZOB1620-59 24 OZOB1620-75 32 OZ

DEAD Blower HammersPolyurethane. Inside hammer head are steel pellets which impact a split secondafter the hammer face, reducing rebound.

CODE SIZE PER/PCOB1690-35 1.5 LBS RMOB1620-55 2.0 LBSOB1690-65 3.0 LBS

12

BALL PEIN HAMMER W/FEBREGLASS H

Welders Chipping Hammers Scaling and chipping hammers. For boiler

scaling, weld dressing etcSpring Steel Shaft Hardened and tempered steel head chisel edge and point strikingfaces with epoxy coating. Spring steel impact absorbing handle for user comfort.

CODE SIZE PER/PCOB-CS030 300GM X 280MM LENGTH RM

CHIPPING HAMMER W/WOODEN HANDLECODE SIZE PER/PC

OB-CW500 500GM RM

BRICK HAMMER W/WOODEN HANDLEFor setting, dressing and splitting bricks, tiles, concrete blocks, chipping mortar etc.

CODE SIZE PER/PCOB-BH500 500GM RM

Cross Pein HammersHardened and ground forged steel head with polished striking face securely fixed to

a close grain hickory shaft. Shaped to fit comfortably in the hand. Tapered head, suitable for use with small pins helps reduce over-strike

CROSS PEIN HAMMER W/FEBREGLASS HDLCODE SIZE PER/PC

OB-PF314 14MM RMOB-PF316 16MMOB-PF318 18MMOB-PF320 20MMOB-PF322 22MM

CROSS PEIN HAMMER W/WOODEN HDLOB-PW314 14MM RMOB-PW316 16MMOB-PW318 18MMOB-PW320 20MMOB-PW322 22MM

WOODEN MALLETCODE SIZE PER/PC

OB-WH240 2" X 4" RM

Club Hammers - Fibreglass ShaftClub hammers are fully forged and heat-treated with flat face and chamfered edges for use with cold chisels, brick bolsters, star drills and masonry nails. With textured slip resistant rubber grip. Shaft & grip combine to dampen the impact transmitted through to the user’s hand and wrist. Reduces operator fatigue and the risk of repetitive strain injury (RSI).

CODE SIZE PER/PCOB1672-1250 2.5 LBS RMOB1672-2000 4 LBS

13

Sledge Hammers - Fibreglass Shaft Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. Dampens the impact transmitted to the user’s hand and wrist. The high strengthof the shaft and head bond make the hammer virtually unbreakable.

CODE SIZE PER/PCOB1673-F04 4LBS RMOB1673-F06 6LBSOB1673-F08 8LBSOB1673-F10 10LBSOB1673-F12 12LBS

Sledge Hammers - Wooden Shaft CODE SIZE PER/PC

OB1673-04 4LBS RMOB1673-06 6LBSOB1673-08 8LBSOB1673-10 10LBSOB1673-12 12LBSOB1673-14 14LBS

Carpenters Claw HammersManufactured from high-grade drop forged steel, fully heat-treated, with the claw being shaped in a continuous curve and tapered to grip the nail firmly.

Fibreglass ShaftWith textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user’s hand and wrist. Reduces operatorfatigue and the risk of RSI (repetitive strain injury).

CODE SIZE PER/PCOB-CF250 25MMOB-CF270 27MM x 16oz

Claw Hammers - Wooden HandleCODE SIZE PER/PC

OB-CW250 25MMOB-CW270 27MM x 16oz

Claw Hammers - Tubular Steel ShaftCODE SIZE PER/PC

OB-CT125 27MM

Plastic MalletCODE SIZE PER/PC

OB1660-22 22MMOB1660-27 27MMOB1660-32 32MMOB1660-35 35MMOB1660-40 40MMOB1660-50 50MMOB1660-60 60MM

14

Air Impact WrenchOne piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4” npt air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption, 16mm bolt capacity.Overall length: 1/2"DR -191mm, 3/4"DR - 245MM

CODE SIZE TORQUE PER/PCOB235 1/2"DR 7000RPM 300FT/LBS RMOB252 3/4"DR 4,200RPM 500FT/LBS

Impact Wrench Kit Includes: 1/2” impact wrench OB235, 10 metric sockets: 9, 10, 11, 12, 13, 14, 1722, 24 & 27mm, threaded tailpiece, in-line mini-oiler. Robust blow-moulded case3/4"Dr Impact wrench c/w socket 24-36mm

CODE SIZE TORQUE PER/PCOB235K 1/2"DR 7000RPM 300FT/LBS RM.OB252K 3/4"DR 4,200RPM 500FT/LBS

150mm/6” Bench GrinderIndustrial quality, for the professional user. Adjustable tool rest and spark deflector. Maintenance free motor. Eye shield. Smooth and quiet operation. Provided with one 36 grit and one 60 grit wheel.Voltage: 240V.Speed: 2840rpm.Grinding wheel diameter: 150mm/6”.Max. grinding wheel width: 25mm.Weight: 11kg. CE approved.

CODE SPEED/RPM SIZE PER/PCOB-BG6 2840 6"OB-BG8 2960 8"

CreepersFramework is manufactured from heavy steel with a powder paint finish. Furnished with a vinyl covered cushioning and are fitted with castor wheels for ease ofmovement.

CODE WEIGHT SIZE PER/PCOB-7320 7kg 1020 x 430 x111mm

TRUCK TRANSMISSION JACKUniversal saddle, brackets and chain sling are fully adjustable to accommodate transmission, clutches and differentials in varying sizes.• Pump handle rotates 360 degree for convenient operation.• Four swivel casters allow for easy to position under the vehicle.• Low frame design gets under the lowest clearance trucks, making it ideal for clutches repair work.• Easily accessible release knob facilitates sensitive load lowering.• Safety overload system prevents the re, form being over extended and beyond it`s reated capacity

CODE SIZE RM PER/PCOB-FJ1500 1.5 TON 890(H)X1105(L)X650MM(W)

15

Bevel Edge Wood ChiselsDesigned to give a life time of high performance. Chrome vanadium alloy blades, hardened, tempered, ground and polished.(cellulose acetate butyrate handles).

CODE SIZE PER/PCOB-GC100 1/4''/6MM RMOB-GC102 3/8''/10MMOB-GC104 1/2''/12MMOB-GC106 5/8''/16MMOB-GC108 3/4''/20MOB-GC110 1'' /25MMOB-GC112 1-1/4''/32MMOB-GC114 1-1/2''/38MM

PROGESSIONAL WOOD CHISEL CODE SIZE PER/PC

OB-GC812 12MM RMOB-GC820 20MMOB-GC825 25MMOB-GC832 32MMOB-GC838 38MMOB-GC850 50MM

6PCS CARVINE CHISEL SETCODE SIZE PER/PC

OB-CC106

GOUGE FIRMER CHISEL W/WOODEN HANDLECODE SIZE PER/PC

OB-GC200 6MM(1/4'') RMOB-GC202 10MM(3/8'')OB-GC205 12MM(1/2")OB-GC210 20MM(3/4'')OB-GC215 25MM(1'')

MARKING GUAGECODE SIZE PER/PC

OB-RP210 6”/150MM RM

CHALK LINE WITH POWDER AND LEVELCODE SIZE PER/PC

OB-CL050 COMPLETE SET RMOB-RP113 113G/4OZ POWDER

16

Internal Spring CalipersManufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points. Calipers are used for takinginternal and external measurements, also for comparing distances or sizes.

MODEL CAPACITY WEIGHT U.PRICE-RMOB-IC0260 150MM/6" 90gOB-IC0280 200MM/8" 110gOB-IC0320 300MM/12" 195g

External Spring Calipers

MODEL CAPACITY WEIGHT U.PRICE-RMOB-EC0460 150MM/6" 95gOB-EC0480 200MM/8" 115gOB-EC0520 300MM/12" 220g

Spring Dividers

MODEL CAPACITY WEIGHT U.PRICE-RMOB-SD0060 150MM/6" 95gOB-SD0080 200MM/8" 115gOB-SD0120 300MM/12" 200g

Vernier Height GaugeManufactured from hardened stainless steel with satin finish. Dual reading scaleAccuracy 0.02mm / 0.001" and with device for fine adjustment. Supplied with case.

CODE SIZE PER/PCOB340-110 0-300MM/12" RM

Combination SetMulti-function, can be used as a square, mitre, depth and height gauge.Consists of: Rule, 300mm/12” hardened stainless steel, metric and imperial measurements with graduations in 0.5mm & 64ths. Square head, with accurate machined faces, fixed angles of 45° and 90°, built in spirit level, adjusting nut and scriber.

MODEL CAPACITY WEIGHT U.PRICE-RMOB-CS3040 300MM/12" 890g 590.00

17

Vernier CalipersInside, outside, depth and step reading. Dual reading scale (metric and inch)with 14° bevelledvernier scale. Knurled locking nut. Manufactured from hardened stainless steel with satin finish.Graduation: 0.02mm & 0.001”. Tolerance: ±0.03mm & 0.001”.

CODE SIZE PER/PCOB-VC290 150MM/6''X0.02MM RMOB-VC300 150MM/6''X0.05MMOB-VC-305 200MM/8''X0.02MMOB-VC310 200MM/8''X0.05MMOB-VC320 300MM/12''X0.05MM

DIGITAL CALIPERS

CODE SIZE PER/PCOB-VC400 150MM/6''X0.01MM RMOB.-VC402 200MM/8''X0.01MM

External MicrometersWith enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25-50mm/1-2” and over supplied with setting standard.

CODE SIZE PER/PCOB-MM0025 0-25MM RMOB-MM2550 25-50MMOB-MM5075 50-75MMOB-MM7510 75-100MM

CODE SIZE PER/PCOB-MMD025 0.25X0.01MM 8'' RM

SLIDING BEVEL

CODE SIZE PER/PCOB-SB200 8" RM

PROTRATOR STAINLESS STEELCODE SIZE PER/PC

OB-PS986 85X150MM RM

18

___________________________________________________________________________________________

________________________________________________________________________________________

19

OB-364A- Tube Bender/Imperial (180) Item No. Outside Norminal Unit Diameter(inch) Size (inch) Price-Rm OB-364A-04 1/4 1/8 OB-364A-05 5/16 - OB-364A-06 3/8 1/4 OB-364A-08 1/2 3/8 OB-364A-10 5/8 1/2 OB-364A-12 3/4 5/8 For sizes 1/4"-1/2", 6-12mm Tube OB-364A-14 7/8 3/4

OB-364M- Tube Bender/Metric (180)

Item No. Outside

Diameter(mm) Norminal Unit Size (mm) Price-Rm OB-364M-06 6 14.2 OB-364M-08 8 17.5 OB-364M-10 10 24.0 OB-364M-12 12 38.1 OB-364M-16 16 57.2 OB-364M-19 19 76.2 For sizes 5/8"-7/8", 16-22mm Tube OB-364M-22 22 76.2

OB-102- Spring Type Tube Bender Item No. Size Length U.Price OB-102-04 1/4" 10" OB-102-05 5/16" 10" OB-102-06 3/8" 10" OB-102-08 1/2" 12" OB-102-10 5/8" 14" OB-102-12 3/4" 14" OB-102-14 7/8" 14" DEBURRER 1/8"-1.5/8" O/D Inner-Outer Reamer

For burr removal on both internal and external edges.Compact

hand held tool with steel blades housed in a robust plastic casing. Suitable for copper, aluminium or brass pipe MODEL Weight U.Price –RM OB208 250g

6-in-1 Fin Straightener 6 sizes for 8,9,10,12,14 & 15 fins per inch

CODE SIZE PER/PCOB351 8,9,10,12,14 & 15 fins per inch RM

Steel Fin Straightener

CODE SIZE PER/PCOB352

CODE SIZE PER/PCOB128 3-22MM

CODE SIZE PER/PCOB5500 3-30MM 195gOB5550 6-60MM 625g

Stage ratchet.

CODE SIZE PER/PCOB-PC42 12-42MM 65

Heavy Duty Pipe CutterExtra-long shank protects adjustment threads, while an extra-large handle is provided for quick, easy adjustment.

CODE SIZE PER/PCOB-2A 1/2-2" (3-50MM) RM

20

Mini Pipe CutterCompact and robust construction ideal for use in confined spaces. Grooved rollers allow close-to-flare cuts. Large feedscrew for accurate cutting of aluminium, brass, copper andsteel tubing. Length 66mm

Pipe Cutters & WheelsSingle cut wheel with two rollers. Suitable for stainless steel, brass and copper tubes. With deburring blade.

Guillotine action ensures a clean cut every time.

Handle retaining loop for compact storage & blade safety.

PLASTIC PIPE CUTTERStainless steel blade.Diecast alloy body.Extra wide lower jaws for easy production of 90° cuts.

MultibenderPrecision bending up to 180° on copper and thin wall steel tubing. Bends tube without distortion. Formers and guides will accept 12, 15 & 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries

CODE SIZE PER/PCOB-PB520 12,15,22MM

3-in-1 Mini BenderFor bending 6, 8 and 10mm diameter copper and aluminium tubes up to 90°. With graduated scale for partial bending. Ribbed cast aluminium construction for lightness and strength.

CODE SIZE PER/PCOB-PB522 1/4''5/16''3/8''

TUBE BENDERCODE SIZE PER/PC

OB-PB524 9/16'' 5/8''OB-PB525 5/16''3/8''1/2''

Chain Pipe WrenchesFor gripping tubes, piping and irregular shaped objects. The chain is looped around the object and locked on the head. The head will automatically grip in the direction of the turn and the object can be rotated. The head is double ended and fully reversible for longer tool life.

CODE SIZE PER/PCOB-CT100 4"/100MMOB-CT150 6"/150MMOB-CT200 8"/200MM

SET OF 5 SWAGING PUNCHFor 1/4", 5/16", 3/8", 1/2", & 5/8" O.D. tubing Vinyl pouch packing

CODE SIZE PER/PCOB-193 5PCS PER SETOB-93-S-03 3/16"OB-93-S-04 1/4"OB-93-S-05 5/16"OB-93-S-06 3/8"OB-93-S-08 1/2"OB-93-S-10 5/8"OB-93-S-12 3/4"OB-93-S-14 7/8"

RATCHET WRENCHCODE SIZE PER/PC

OB-123 2PCS SET - 1/4",3/8",3/16",5/16" SQUARE RATCHETS

OB-122 2PCS SET - 9/16",1/2" HEX1/4",3/16" SQ. RATCHETS

21

Ratcheting Axle StandsSuitable for supporting raised vehicles or equipment. Wide angled base, stamped and welded steel frame with solid steel control lever & Protective red enamel coating. 10-position ratchet design that automatically locks when raised. Capacity is per pair.

CODE SIZE PER/PCOB-T42004 2 TON(278Min-423mm/Max)OB-T43001 3 TON (298Min-428mm/Max)OB-T46000 6 TON

Trolley Jack / Hydraulic Floor JackStrong steel chassis provides stability when under load. Fixed direction casters and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lower. Safetyoverload protection valve prevents overload damage to hydraulic mechanism.

CODE SIZE PER/PCOB-TJ200 2 TONOB-TJ225 2.25 TONOB-TJ250 2.5 TONOB-TJ300 3 TON

Battery Hydrometer TesterSuitable for use with Ethylene Glycol or Methanol type anti-freezes.Tough glass tube construction with an easy to read scale. For use on hot or cold engines

CODE SIZE PER/PCOB-SFT001 8" Glass, 12" length

Inspection LampWith rubberised handle, wire protection cage, integral hook, 3 pin plug, 100w bulb and 5m/16ft of cable.

CODE SIZE PER/PCOB-IL516 5M X 100WATTSOB-IL1016 10M X 100WATTS

Car Light Testerfor voltage test, testing range 6 to 24 Vwith tip, protective cap, fixed cable and clip

CODE SIZE PER/PCOB586 120MM

Piston Ring PliersTo enable fast Installation or removal of piston rings. A self-adjusting spring tensioned mechanism manufactured from nickel-plated steel with PVC handles for extra grip.

CODE SIZE PER/PCOB235-50 50-100mm OB235-80 80-120MMOB235-110 110-160MM

22

Roller Cabinet - 3 DrawerManufactured from heavy gauge steel with two wall construction side panels andwelded joints for added rigidity. Coated in a hard wearing epoxy powder.Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. 3 drawers and 1 compartment.3 DRAWER @ 590 X 410 X 100MM, 1 COMPARTMENT @ 590 X 410 X 355MM

CODE SIZE PER/PCOB803 690MM(W)X460MM(D)X850MM(H) RM 1,600.00

Roller Cabinet - 5 Drawer4 DRAWER @ 590 X 410 X 100MM1 DRAWER @ 590 X 410 X 200MM

CODE SIZE PER/PCOB805 690MM(W)X460MM(D)X850MM(H) RM 1,750.00

Roller Cabinet - 6 Drawer & 7 Drawer6 DRAWER - 2 @ 590 X 410 X 50MM, 2 @ 590 X 410 X 100MM2 @ 590 X 410 X 150MM 7 DRAWER - 4 @ 590 X 410 X 50MM, 2 @ 590 X 410 X 100MM1 @ 590 X 410 X 200MM

CODE SIZE PER/PCOB806 690MM(W)X460MM(D)X883MM(H) RM 1,950.00 OB807 690MM(W)X460MM(D)X850MM(H) RM 2,000.00

Tool Chest-4 Drawer3 DRAWER @ 590 X 280 X 50MM, 1 DRAWER @ 590 X 280 X 100MMTOP COMPARTMENT @ 660MM X 150 X 310 X 53MM Manufactured from heavy gauge steel . Supplied with tote tray and drawer liners. One piece smooth running ball bearing drawer slides with double sliders on base drawer. Epoxy powder coated finish with re-inforced corner tabs.

CODE SIZE PER/PCOB904 670MM(W)X315MM(D)X385MM(H) RM 880.00

3 Tray Tool TrolleyBolted steel construction with a hard wearing powder coated finish. 100mmindustrial castors with Brakes fitted to 2.Overall length: 760mm. Width: 410mm. Height: 780mm

CODE SIZE W X D X H PER/PCOB-TT703 760MM X 410MM X 780MM RM 350.00 OB-TT704 737MM X 383MM X 780MM 340.00

TOOL BOXES-CantileverManufactured from industrial quality steel with all welded construction. Durable corrosion-resistant two part epoxy powder coat finish. Two piece cantileverlids with padlock hole for additional security.

CODE SIZE W X D X H PER/PCOB803 440MM X 170MM X 210MM 73.00

3-TRAYOB810 440MM X 200MM X 210MM 83.00

5-TRAY

23

Oil Filter WrenchCODE SIZE PER/PC

OB-HH100 60-75MMOB-HH200 75-95MMOB-HH300 95-115MM

Chain WrenchesHardened chrome vanadium handle with heavy duty chain for a positive grip.Used for gripping round and irregular shaped items, tubes and piping. Ideal for oil filters, hot radiator caps and hub caps.

CODE SIZE PER/PCOB-KW150 30-150mmOB-KW160 30-160mmOB-KW300 30-300mmOB-KW500 30-500mm

Hexagon Key Walleted SetsManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends, Black finish

CODE SIZE PER/PCOB159S10M 1-10MM (10PCS)OB159S10A 1/16"-3/8" (10PCS)

Grease GunEnamel finish steel body and handle, offset nozzle. Cartridge, bulk or suctionfill. Suitable for medium/heavy greases. Diameter: 63mm.Overall Length: 352mm.

CODE SIZE PER/PCOB-LG500 500CC X 1.5KG

FILE CARDSCODE SIZE PER/PC

OB-250FB 50 X 115MM X 235MM

Steel BrushesTop quality brushes with hardened and tempered cast steel wire bristles. Hardwood stocks.

CODE SIZE PER/PCOB250-3 3 ROLLSOB250-4 4 ROLLSOB250-5 5 ROLLSOB250-6 6 ROLLS

BRASS BRUSHCODE SIZE PER/PC

OB-251-3 3 ROLLS OB-251-4 4 ROLLSOB-251-5 5 ROLLSOB-251-6 6 ROLLS

24

General Purpose TinsnipsManufactured from drop forged carbon steel with hardened and precision .ground blades which will take re-sharpeningA traditional design, suitable for the general purpose cutting of sheet metalin a wide range of materials such as copper, aluminium and mild steel

CODE SIZE PER/PCOBST123-08 8"OBST123-10 10"OBST123-12 12"

ALL PURPOSE SNIPSManufactured from tough alloy steel blade with comfortable vinyl gripscuts up to 0.78mmof cold rolled steel and 0.46mm of stainless steel

CODE SIZE PER/PCOB-ST233-10 10"OB-ST233-12 12"OB-ST233-14 14"

Aviation SnipsManufactured from the finest industrial quality drop forged chrome vanadium steel hardened to 54-58 Rockwell with ground cutting edges, for clean accurate cuts. Spring loaded to allow easy single-handed operation. The handles arecoated for improved comfort, control and have anti-slip guards for extra safety. Suitable for use on mild steel and other non-ferrous materials.Capacity: upto 1.2mm cold rolled steel sheet.270(W) x 35(D) x 50(H)mm

CODE SIZE PER/PCOB-AS21 RIGHT HAND 10"OB-AS22 STRAIGHT HAND 10"OB-AS23 LEFT HAND 10"

Adjustable HacksawsEpoxy coated tubular steel frame for strength and rigidity. The blade can be set at 90° to the frame to allow cutting in areas with restricted access. Wing nut blade tensioning. Accepts 250mm (10”) and 300mm (12”) blades. supplied complete with All Hard HSS blade, 300mm (12”) 18TPI.

CODE SIZE PER/PCOB-HS135 400MM

Junior Hacksaw FrameSpring steel frame, keeps the blade tensioned correctly at all times. Suitable for smaller general cutting applications, where the workpiece cannot be held firmly. Supplied complete with metal cutting blade 150mm (6”) 32 TPI.

CODE SIZE PER/PCOB-HS060 260MM

Mini Hacksaw with Plastic HandleCODE SIZE PER/PC

OB-HS219 6''

25

DOUBLE LAYERMODEL SIZEOB-WG200

CODE SIZEOB-UM205 (BLACK)OB-UM206 (CLARITY)

Hearing Defenders/Ear MuffHearing ProtectionEar defenders suitable for use in moderate environments of industrial noise,

With Flexible reinforced plastic headbands, ABS cups and PVC cushions.

Conform with EN 352-1: 1993.Attenuation Values: SNR = 27dB H = 33dB M = 24dB L = 15dB.

CODEOB-EM210

CODEOB-DM215

CODEOB-DM220

CODEOB-DM225

26

DUST MASK WITH DOUBLE CARTRIDGE

DUST MASK WITH CARTRIDGE

WELDING GOGGLES

ADJUSTABLE SAFETY GOGGLES

DUST MASK

Full Face ProtectionComfortable and lightweight giving full facial protection. Easy adjustment of the crown strap. Simulated leather comfort band with foam backing. A pivot mechanism provides four different positions for the screen.

FACE SHIELDCODE SIZE

OB-FS4690 CLEAR/COMPLETEOB-FS4691 DARK/COMPLETEOB-FSB4690 CLEAR/BLADE ONLYOB-FSB4691 DARK/BLADE ONLY

Welding ShieldCODE SIZE

OB-HS-M2 Hand ShieldOB-HS-M3 Hand ShieldOB-HS-M7 Head Shield

DUST CARTRIDGE

CODE SIZEOB-DM230 RC202(CHEMICAL)OB-DM232 RC201

DUST MASK-DISPOSABLECODE SIZE

OB-UM125 50 PC/BOX

SAFETY GOGGLESCODE SIZE

OB-0500 70GOB-1250 ANTI-MIST

GENERAL PURPOSE SCISSORSCODE SIZE

OB-S3540 140MMOB-S3590 190MMOB-S3615 215MM

27

6 pce Chisel & Punch setCODE SIZE PER/PC

266K 6pce set

Leather GlovesSelected cow split leather one piece backs.

Fully lined, two piece lining, fleece hand and cotton cuff.CODE SIZE PER/PC

OB-AE300 13" Green RMOB-AE301 13" Red

ApronCow Split Leather 24" x 36" Grey & BrownCanvas blue

CODE SIZE PER/PCOB-AP300 LeatherOB-AP100 Canvas

Screw Extractor Sets

CODE SIZE PER/PCOB-351S5 6-18MM - 5PCE SETOB-352S6 6-24MM - 6 PCE SETOB-353S8 6-45MM - 8 PCE SET

MECHANICS STETHOSCOPELocates source of engine noise quicklyListeN for trouble by tracing sound of flowing water, oil, gas or steamIdentify piston slap, worn gears, faulty valves, water pump failure.Damaged gaskets and defective bearing.

CODE SIZE PER/PCOB-2116

28

• Ideal for pressing, bending and extruding. 1915MM x 1050MM x 440MM• Welded steel frame with two end brace for stability.• Fully adjustable work bed providing flexibility and convenience.

CODE SIZE PER/PCOB5602 10 TONS w/o pulley RMOB5303 20 TONS w/o pulleyOB5501 50 TONS with pulley

DRAIN PAN • Special design on rim for prevent the oil comes out. • And the producing hole also has special design on pour out the oil.• Molded handles and 45˚ spout permit easy handling and pouring• Dish to save the shop oil.

CODE SIZE PER/PCOB45 16L RM

Electric Parts WasherDiamension780mmx550mmx310mm

CODE SIZE PER/PCOB3215 20 gallon RM

Folding Mobile CraneHeavy-duty steel construction.

For position telescopic boom with 3/8" proof chain and forged steel grab hook.

Oil reservoir and base are welded as one unit for resisting oil leakage.CODE SIZE PER/PC

OB2001 2 TONOB3001 3 TON

COOLING SYSTEM TESTERS Test cooling system for leaks.Includes hand pump, test head in a blowmold case.Suit for: Nissan, Mitsubishi, Mazda, Subaru, Toyota, Honda, Ford GM, Chrysler, VW, Audi, Volvo, Saab, Mercedes Benz, BMW, Renault, Fiat, Alfa Romeo, Infiniti, Geo, Suzuki, Isuzu, Lexus, Opel, Peugeot, Jeep, Rover, Citron, Truck.

CODE SIZE PER/PCOB1005 14 PCS SET RM

29

Hydraulic Bench Press with gauge

Power supply : 240/50Hz ( Solvent Pump )Net weight : 28kg

•For hand grinding flat head, unslotted valves. Synthetic rubber vacuum cups are resistant to oil, grease, gasoline and are replaceable.•Cup diameters: 5/8", 13/16", 1-1/8", 1-3/8".

CODE SIZE PER/PCOB1113 2 PCE SET RM

COMPRESSION TESTER KIT • Easy-reading 2-1/2" diameter gauge features color-coded quadruple calibrations

with 0-300 psi, 21 kg/cm, 21 bar & 2100 kpa.

• 13" durable rubber hose with 14mm / 18mm adapter.

• 6" heavy-duty stem with universal rubber cone adapter fits all plug holes.

CODE SIZE PER/PCOB1621 2.1/2" DIAMETER RM

WASTE OIL DRAIN • Special designed for no switch beneath of the hopper, and that sis not spray any oil absolutely.• There is a filling net in the hopper that can be removed any dirty wastage on it. • Use ordinary shop air to move out the waste oil.

CODE SIZE PER/PCOB1301 80L RM

AIR OPERATED GREASE PUMP • Uses air as power to stuck grease into lubrication points.

• Suitable for 00#~2# grease. Pressure ratio:45:1

• Air inlet pressure:4~9kgs/cm. Deliver rate:30cc/sec

• Grease output pressure:180~405kgs/cmCODE SIZE PER/PC

0B1034 20L RM

HAND OPERATED OIL PUMP • With reservoir capacity 20L

• suitable for general lubricant and gear oil.CODE SIZE PER/PC

OB1033 20L RM

30

VACUUM CUP VALVE GRINDER

Manufacture from the highest quality precision cast body with powder coating finish. Chrome plated handle, swivel base with anvil and standard fixed pipe jaws .

CODE JAW Width PER/PCOB-F45 4"(100mm) RMOB-F50 5"(125mm)OB-F60 6"(150MM)

Bench Yoke ViseYoke and base made of strong, dependable iron.Hardened alloy steel jaws and convenient pipe rest and bender.

CODE SIZE PER/PCOB401 1/8"-1" RMOB402 1/8"-2"OB403 1/8"-3"OB404 1/8"-4"

ANGLE PLATEManufactured from close grained cast iron. BS : 5535 Grade B. Open end angleplates are versatile accessories which can be used to clamp and hold work ina vertical position for planing, milling, or drilling. Work can be clamped androtated through several planes for measurement or machining without repositioning

CODE SIZE PER/PCOB-AP150 150MM X 125MM X 112MM RMOB-AP200 200MMX150MMX125MM

Vee Blocks & ClampDesigned for checking precision machine parts. Hardened and precision ground

steel supplied in matched pairs each with V-grooves central and parallel to the

sides and base ensuring perfect alignment. Complete set with two V-blocks.

(one pair) and two clampsCODE SIZE PER/PC

OB-VBS503 63 mm x 50 mm x 50 mm RMOB-VBS704 80MMX63MMX63MMOB-VBS805 100MMX75MMX75MM

Plain Surface Platemanufactured from high quality of close grained cast iron and are stress relieved against distortion by heat treatment. Rigidity and long lasting accuracy are ensured by adequate top and side thickness and ribbed construction. The surfaces are .free from pin holes, planed and hand scraped. Manufactured to BS 817

CODE SIZE PER/PCOB-SPC1824 600 mm x 450 mm RM

31

Bench Vices c/w Swivel Base

• Reversible jaw adaptor for multi-valve engines.

• Capacity 45-145mm, throated clearance 250mm big window jaw adaptor

for easy replacement of valve collects.• Dual size in 25mm and 30mm diameter.

CODE JAW Width PER/PCOB-1711 45-145MM RM

Universal Valve Spring Compressor• Suitable for use on multi-valve petrol & diesel engines with deep seated valves.

• Also for use with OHC OHV & CVH engines.

• Reversible jaw with 55mm-175mm capacity.

• 165mm throat depth.CODE SIZE PER/PC

OB1731 55-175MM RM

One Man Operation-Valve Spring Compressor Kit• Easy for single use, operate by a thread bar to fix on right place.

• Large window on the valve pusher to supply more space to replace the valve collets.

• The size of the valve pusher is 22 φ , it could use with on 12V, 16V, 20V, and 24V engine.

• You do not have to remove the cylinder with this tool, it has saved a lot of manpower.

CODE SIZE PER/PCOB1238 12V TO 24V engine RM

Straight Edge• Great stability with 5/8” width, 1-3/8” height and 20-1/2” length. Convenient

hanging hole and edge protector.

• Use with feeler gauges to check for distortion in engine blocks, cylinder heads

and flywheels.CODE SIZE PER/PC

OB1010 1.3/8" X 20-1/2"length RM

Torque WrenchManufactured from chrome vanadium steel. Reversible ratchet head, Micrometer-type sleeve allows accurate

torque values Included case for protective storage

CODE SIZE PER/PCOB-T80F 5-80FT LBS 3/8"DR RMOB-T150F 10-150FT LBS 1/2"DROB-T250F 50-250FT LBS 1/2"DROB-T600F 100-600FT LBS 3/4"DR

SERVICE JACKPump is operated by both activating foot pedal to provide speed to contact theload, and activating “T” handle to lift it.Hydraulic power unit with dust seals to prevent oil contamination.Large heavy duty rear swivel caster wheels provide easy maneuvering and positioning of jack.

CODE SIZE PER/PCOB-SJ03000 3TON 1322 x 326 x 1037MM RMOB-SJ05000 5TON 1322 x 365 x 1037MMOB-SJ10000 10TON 1390X490X1037MM

32

Valve Spring Compressor

1)Built in 6V/4AH rechargeable battery

2)Flash with LED.Alarm function

3)Includes AC adapter and DC adapterCODE SIZE

OB 15011 2 Millon candle power RM

Rechargeable Spot Light (waterproof)

1,000,000CP/2,000,000CP RECHARGEABLE SPOT LIGHT

BUILT WITH 6V 55W/100W H3 BULB

6V 4AH LEAD ACID BATTERYWITH AC/DC CHRAGER & DC CIGARETTE CORD

CODE SIZEOB 15012 1 Million candle power RM

Working LightAC220V 8W 400MM/ 11W 600MM available With hanging hook5M cord with 13amp three pin plug Ideal for working at home, shop garage .

CODE SIZEOB 15013 RM

WARNING LIGHTThree colours available (Blue, Red . Amber)With 3M cordDirect use with 12V cigarette lighter plugBy strong magnet hold light on the automative

CODE SIZEOB 15014

Multi-Function Plier toolsFunctions:60mm super sharp knife blade, 60mm scalloped edge knife,5 x 22mm screwdriver blade, 7 x 25mm screwdriver blade,2 x 20mm flat screwdriver, awl/punch tool, 65mm single/double cut file,No.0 x 25mm crosspoint screwdriver, inch graduated rule with fish descalerand hook remover, tin opener, long nose pliers with flat and curved serrated jaws,bypass action, wire cutters.

CODE SIZEOB-MF41-1 14 FUNCTIONS RM

Rechargeable Spot Light (waterproof)

Drill Press Vices For drilling, light milling, vertical and horizontal work. Bearing mounted knurled handle to give optimum gripping power, smooth action and extendedservice life. One grooved and one plain replaceable jaw for square and hexagonalshapes across flats or corners, thin strips and discs. Jaws and lead screw are hardened and ground.

CODE JAW WidthOB-DPV040 4"(100mm) RMOB-DPV050 5"(125mm)OB-DPV060 6"(150MM)

Corner ClampIdeal for use with wood, angle and tubing. Clamping jaws swivel to accept various widths. Die cast aluminium body with bench mounting.Overall base dimensions: 158 x 158mm

CODE SIZEOB-CC010 Jaw depth: 36mm. RM

Iron Anvil

CODE SIZEOB-IA025 25KG RMOB-IA050 50KGOB-IA075 75KG

Metal Oil CansEnamel finish, heavy gauge, seamless metal bodied oil cans. With positive force

feed brass pumps and valves. Supplied with both rigid metal and flexible nylon

threaded spouts.CODE SIZE

OB-OC0300 300CC RM

Ajustable WrenchManufactured from "I" beam section chrome vanadium steel for improved strength and rigidity, the jaws are heat treated for extended tool life. Corrosion resistant satin finish. 22.5 degree offset head angle for positive torque control.

OB60-4 4" - 100MM RMOB60-6 6" - 150MMOB60-8 8" - 200MMOB60-10 10"-250MMOB60-12 12"-300MM

34

Heavy Duty workbench 40mm thick linseed oil-treated beech-ply worktop. Ridgid steel construction

CODE SIZE PER/PCOB-2230A 2M(L)X750MM(W)X850MM(H) RMOB-2236B 6ft(L) X 3ft(W) X 850MM(H)

Heavy Duty workbench 40mm thick linseed oil-treated beech-ply worktop. Ridgid steel construction

CODE SIZE PER/PCOB-2225AA 1.5M(L)X750MM(W)X850MM(H) RM

Heavy Duty workbench 40mm thick linseed oil-treated beech-ply worktop. Ridgid steel construction c/w one 5-drawer unit.

CODE SIZE PER/PCOB-2230AB 2M(L)X750MM(W)X850MM(H) RMOB-2236BB 6ft(L) X 3ft(W) X 850MM(H)

Heavy Duty workbench 40mm thick linseed oil-treated beech-ply worktop. Ridgid steel construction c/w one 5-drawer unit.

OB-2225AB 1.5M(L)X750MM(W)X850MM(H)

DRAWER UNITSDrawer unit to fit either side under worktop tor model OB-2230AA,OB-2225AAand OB2236AA, Units supplied with keylock. Dimensions: 534mm x 358mm

CODE SIZE PER/PCOB-2235AT1 670X426X195MM RMOB-2235AT2 670X426X315MMOB-2235AT3 670X426X315MM

35

WORKBENCH 2M

WORKBENCH 1.5M

WORKBENCH 2M

WORKBENCH 1.5M

1/2" Super Duty Air impact Wrench It offers the sheer power and performance features to tackle the toughest jobs with ease - as well as proven durability and economyMax. Torque – 425ft.-lbs/578 Nm

CODE SIZE TORQUE PER/PCOB231 1/2"DR 8000RPM 300FT/LBS RM

500kg Engine Support BeamFor supporting and accurately positioning engines during maintenance operationsand as an aid for the removal of gearboxes and transmissions. Adjustable width tobridge various engine compartments. Fitted with soft rubber feet to protect thebodywork. Fine adjustment is obtained by using a threaded hook. Supplied with a 92cm long chain. Supporting legs can be tilted forwards and backwards to match the angle of the inner wing panels.

CODE SIZE PER/PCOB-15201 500KG RM.

Battery booster CablesFor use on cars and light commercial vehicles. Easy starting with low power loss.Tangle free copper cable with double insulation. Robust fully insulated colourcoded clamps. Suitable for 12 & 24 volt systems. 4.5 metre cable.

CODE Amp/Rating SIZE PER/PCOB-AM220 220 3.5mOB-AM300 300 3.5mOB-AM350 350 3.5mOB-AM500 500 3.5m

Disc Brake Piston SpreaderUse for cars to small trucks. Fits in brake caliper to push back pistons for new brake pads installation. Can be used with 1/2" dr ratchet

CODE WEIGHT SIZE PER/PCOB-DDB10010 21MM

3 Leg Oil Filter WrenchUse with 1/2" sq dr tools or 21mm spanner or socketsRemoves all oil filters from 2.1/2" to 4" diameter (63mm-102mm)

CODE SIZE PER/PCOB-1942 1.1/2"-4"

36