DOUBLE CONTAINMENT SYSTEMINDUSTRIAL PIPING SYSTEM

Installation MethodsSupply RangeLeak detectionApplication Range and ReferencesDOUBLE CONTAINMENT PIPING SYSTEM

INSTALLATION METHODSINDUSTRIAL PIPING SYSTEM

Piping for transport of dangerous chemicals and waste waterUnderground Installation Above ground Imstallation Transport pipelines for dangerous and corrosive medias through ground water protection areas- in industrial plants

- in the chemical industry

- in the pharmaceutical industry

in the semi conductor Fabs

in the PV Fabs

Waste Water Piping system Pharmaceutical and Biotech Industry Waster Water and Waste chemical Piping in Industry (Petrochemical plants, Aerospace industry, etc.)Installation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION PROCEDURES SIMULTANOUS - WELDING STAGGERED - WELDINGInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODSInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODS SIMULTANOUS - WELDING1. Control the offset at the inside pipe and afterwards planing the inside and outside pipe Installation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODS2. Preheating of the jointing area SIMULTANOUS - WELDING:Installation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODS3.Welding of the inside & outside pipe SIMULTANOUS - WELDINGInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODSInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODS STAGGERED - WELDING1. Welding of the inside pipeInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODS2. Welding of the outside pipe with a splitted heating element STAGGERED - WELDINGInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODS3. Control of the welding beat at the outside pipe STAGGERED - WELDINGInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODSInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODSInstallation MethodsSupply RangeLeak detectionApplication Range and References

SYSTEM FEATURES STAGGERED WELDING SIMULTANOUS WELDINGIn principal no control of The inside pipe welding seam possibleControl of the inside welding seam possibleLess time spent for a welding ( low installing costs)Outside and inside pipe out of the same materialDifficult installation of theleak detection cable Higher time expenditure per welding (higher installing costs)Outside and inside pipes can be a different materialEasier installation of theleak detection cableInstallation MethodsSupply RangeLeak detectionApplication Range and References

SUPPLY RANGEINDUSTRIAL PIPING SYSTEM

SUPPLY RANGEInstallation MethodsSupply RangeLeak detectionApplication Range and References

PEHD/PEHD PP/PP

FOR SIMULTANOUS WELD INSTALLATIONSInstallation MethodsSupply RangeLeak detectionApplication Range and References

DOUBLE CONTAINMENT FITTINGS FOR SIMULTANOUS WELD INSTALLATIONSInstallation MethodsSupply RangeLeak detectionApplication Range and References

DOUBLE CONTAINMENT DOG BONES FOR

SIMULTANOUS WELD INSTALLATIONSInstallation MethodsSupply RangeLeak detectionApplication Range and References

DIMENSIONS FOR STAGGERED WELDINGInstallation MethodsSupply RangeLeak detectionApplication Range and References

DOUBLE CONTAINMENT FITTINGS

FOR STAGGERED WELDINGInstallation MethodsSupply RangeLeak detectionApplication Range and References

DOUBLE CONTAINMENT DOG BONES FOR

STAGGERED WELDINGInstallation MethodsSupply RangeLeak detectionApplication Range and References

DOUBLE CONTAINMENT SPECIAL FITTINGSInstallation MethodsSupply RangeLeak detectionApplication Range and References

SPECIAL FITTINGOUTSIDE CONTROLLED BALL VALVEInstallation MethodsSupply RangeLeak detectionApplication Range and References

SUPPLY RANGEInside and outside pipe are fixed againstthe surrounded areaInside and outside pipe are fixed againstthe surrounde areaInside and outside pipe arefixed together1. RIGIDE SYSTEM WITHOUT POSSIBILITY OF HEAT EXPANSION2. RIGIDE SYSTEM WITH HINDERED HEAT EXPANSIONInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODSInstallation MethodsSupply RangeLeak detectionApplication Range and References

INSTALLATION METHODSResult of a NOT very well installed piping system !Installation MethodsSupply RangeLeak detectionApplication Range and References

STRESS ANALYSES SOFTWARE1. input data2. calculation 3. resultInstallation MethodsSupply RangeLeak detectionApplication Range and References

PRESSURE TESTIt is necessary that the inner pipe remains under pressure during testing of the outer pipe to prevent collapsing of the carrier pipe.The internal pipe has to be tested first. Upon successful completion of the inner pipe test the outer pipe can be tested.Installation MethodsSupply RangeLeak detectionApplication Range and References

LEAK DETECTION METHODSINDUSTRIAL PIPING SYSTEM

LEAK DETECTION METHODS LEAKAGE SENSORInstallation MethodsSupply RangeLeak detectionApplication Range and References

LEAK DETECTION METHODSLEAKAGE SENSOR example for underground installationDF 1000iDF 1030iDF 1030iDF 1037iInstallation MethodsSupply RangeLeak detectionApplication Range and References

LEAK DETECTION METHODS LEAKAGE SENSOR example for above gound installation DF 1000iDF 1010iDF 1010iDF 1017iInstallation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESINDUSTRIAL PIPING SYSTEM

APPLICATION RANGE AND REFERENCESProject: Boeing/USAInstallation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESProject: CNC PP/PPInstallation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESProject: ABBOTT LABS ECTFE/PPInstallation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESProject: brewery Zipf / Zipf PEHD/PEHDInstallation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESProject: PWN Andijk PEHD/PEHD VINK_NLInstallation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESProject: CORUS BV PEHD/PVDFInstallation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESProject: Petrochemica de Venezuela PP/ECTFE 250/160 & 315/200 Installation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESReferences in the PV Industry Global Solar, AZ Evergreen Solar, MA & MI Suniva, GA Hemlock Solar, MI Heliovolt, TX Sunpower, Phillipines Conergy / Germany First Solar/Malaysia Wacker/Germany Suntech/ChinaInstallation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESReferences in the IndustryUSAAT&T/Macungie PA, Bell Labs/Naperville IL, Cessna Air/Wichita KS, Dupont/Niagara Falls NY, Ford Motor Company/Detroit MI, General Motors/Trenton NJ, IBM/Austin TX, Motorola/Chandler AZ, Texas Instruments/Dallas TX, Boeing/Seattle

EUROPE Frauenhofer Institut/Germany, Voest Alpine/Austria, Flockton/GB, Philips/The Netherlands, Ciba Geigy/Switzerland

ASIASharp/Japan, Samsung/Korea, Tech/Singapore Posco Hls/Korea, Silterra Malaysia, IMFS SingaporeInstallation MethodsSupply RangeLeak detectionApplication Range and References

APPLICATION RANGE AND REFERENCESReferences in the Pharmaceutical Industry:Further customers: Johnson & Johnson, Wyeth, Glaxo ..Installation MethodsSupply RangeLeak detectionApplication Range and References

AGRU Kunststofftechnik GmbHIng.-Pesendorfer-Str. 31A-4540 Bad HallAustria / EUwww.agru.at T +43 (0) 7258 790 - 0F +43 (0) 7258 3863E office@agru.atSubject to errors of typesetting, misprints and modifications. Illustration are generic and for reference only!THANKS FOR YOUR ATTENTION