1

Index

2 System Overview

4 Specifications

5 System Components

15 19" Hinge Frames

19 Doors

31 Panels

35 Roof Options

37 Base Options

38 Lifting Options

39 Shielding

40 IP 54

41 Dress Components

2

System Overview

The standard system cubicle (SE) together with the cubicle itself, the expansion accessoryprogram represents a method of construction, which fully satisfies today’s and futurerequirements.

One standard cubicle fors Low voltage switch gears Power electronicss General industrial electronicss Telecommunicationss Traffics 19" technologys Installation technologys Diverse designs.

One cubicle for factories and workshopsOne cubicle benefiting from consistent system designs:s Easy to use and versatile in the satisfaction of technical requirements (mechanical

and electrical seal, good corrosion protection).s Easy to project due to the 25 mm grid in height, width and depth (CAD and CAM

application).s Easy to install due to accurately machined parts and the use of self- tapping screws without

nuts, washers and springs.s Easy to transport due to the space-saving design and high strength

The SE cubicle uses screw fasteners and consists of the frame, the panelling and the individualparts.

The frame consists of sendzimir galvanized steel profiles interconnected by corner connector’sand fishplates.

3

The profiles have two mounting flanges with the system perforations and an additional row ofholes for securing the panelling. The profiles can be mounted as standard in all three coordinates.

The door is of symmetrical design and can therefore be hinged either at the left or right. A flangecan be mounted so that standard doors can overlap. Punched supports are fitted for installation ofaccessories (instruments, circuit diagram pockets, cable guides etc.). The door is ready to befitted with a seal.

The side and rear, roof and base panels are of identical design. All edges are curved and theyare secured to the frame for earthing, by means of permanently fitted screws with a cuppedgripping point

Removable parts, as for example the 19" rack support, the hinged frames, the mounting platesand parts for the connection areas etc. are galvanized and are mounted in the system grid bymeans of self tapping screws.

Ancillary parts like roller sets, filters, fans etc. can be fitted at any time.

The cubicle is ready to be fitted with seals to give protection against foreign bodies (water, dust)and/ or for Electro-magnetic disturbance fields (HF).

4

Specifications

DIN 41 488 Parts 1 and 2IEC 297 - 3 Issue (IEC 48 d (Co) 6)DIN 89 009

Every width, height and depth is available, in steps of 50mm.

DIN 43 660 25.00 mm gridDIN 43 355 (draft issue) 25.00 mm gridDIN 41 494 Parts 1 to 5 44.45 mm grid

Profiles, panelling, fishplates, and removable parts: Steel.Corner connectors: Aluminum

Profiles, panelling: zinc sealDoor: paintedFish-plates and removable parts: chromatedCorner connectors: bare.

Baked synthetic resin paint with structured finish

Cubicles without sealIP 40 to DIN 40050/ IEC 144

Cubicles with sealIP 54 to DIN 40050/ IEC 144

Cubicles galvanized:HPR (-25 degrees Celsius, up to 90% relative humidity, dewing possible).

Frame, panelling, removable and internal parts by means of screws with cupped gripping point,door by means of eating cable.

10,000 N static

Individually and in rows

M12 bolts

4 transport brackets, fitted with 26 mm hole.Carry capacity 5,000 N per bracket with vertical pull

Latch, lever, and bolt locks with safety lock

5

System Components

Legend

1 Frame

2 Rear panel

3 Transport bracket

4 Side panel

5 Roof panel

6 Labeling strip

7 Door

8 Base-plate

9 Filler profile

6

Frames, complete SE

The scope of supply includes:

Frame profilesCorner connectorsFish-platesFasteners M8 and mono-bolt

Frame Type A

Prepared for:s Door at fronts Rear panels Two side panelss Roof and base-plate

Frame Type B

Prepared for:s Door at front and rears 2- off side panelss Roof and base-plate

Further designs possible.

7

Frame details

8

Frame weights

Dimensions(height, width, depth)

Weight(kp)

Dimensions(height, width, depth)

Weight(kp)

1000x 600x 4001200x 600x 400

16, 318, 7

1000x 600x 4001200x 600x 400

21, 423, 4

1600x 600x 4001600x 600x 6001600x 900x 600

20, 521, 422, 7

1600x 600x 4001600x 600x 6001600x 900x 600

26, 127, 930, 5

1800x 600x 4001800x 600x 6001800x 900x 600

21, 922, 824, 1

1800x 600x 4001800x 600x 6001800x 900x 600

27, 529, 331, 9

2000x 600x 5002000x 800x 5002000x 900x 500

23, 824, 625, 0

2000x 600x 5002000x 800x 5002000x 900x 500

30, 231, 832, 7

2000x 1200x 6002000x 1500x 6002000x 900x 600

24, 225, 025, 5

2000x 1200x 6002000x 1500x 6002000x 900x 600

31, 032, 632, 7

2000x 1200x 6002000x 1500x 6002000x 1800x 600

26, 828, 029, 4

2000x 1200x 6002000x 1500x 6002000x 1800x 600

36, 138, 741, 3

2000x 600x 5002000x 900x 1000

25, 927, 2

2000x 600x 5002000x 900x 1000

34, 437

2200x 600x 5002200x 800x 5002200x 900x 500

25, 226, 126, 5

2200x 600x 5002200x 800x 5002200x 900x 500

26, 927, 828, 2

2200x 600x 6002200x 800x 6002200x 900x 600

25, 526, 426, 8

2200x 600x 6002200x 800x 6002200x 900x 600

27, 328, 228, 6

2200x 1200x 6002200x 1500x 6002200x 1800x 600

28, 129, 430, 7

2200x 1200x 6002200x 1500x 6002200x 1800x 600

29, 931, 232, 5

2200x 600x 10002200x 900x 1000

27, 328, 6

2200x 600x 10002200x 900x 1000

29, 130, 4

TYPE ATYPE B

9

Profiles, complete SE

PROFILE V

Used for: Frame rods, depth and width profiles on the SE cubicleDelivery quantity: 1- offMaterial: steelSurface: Galvanized

PROFILE W

Used for: Frame rods, depth and width profiles on the SE cubicleDelivery quantity: 1-offMaterial: SteelSurface: Galvanized

10

Intermediate Post

This post allows for the division of a larger frame into smaller sections. For example a 1200mm(nom) wide frame can be fitted with Z x 600 (nom) panes which can be removed separately.These pictures show the intermediate post fitted to w- style profile.

Intermediate post connector showing mountingfacility to profile.Material: cost aluminumScrews : steel, galvanized and chromated

11

Universal adapter profiles

Legend:

1. U-strut with strap

2. Hexagon head screw M6 x 12

3. U-strut 600

4. Hexagon head screw M6 x 12

5. Universal strap

6. Hexagon head screw M6 x 12

7. Unit support SE

8. Hexagon head screw M6 x 12

12

U-strut with strap

For siffening the cubicle andas a mounting component forthe hinged frame and the unitsupport.Consisting of:1 -off U-strut2 -off strap3 -off hexagon head screwM6 x12Material: SteelSurface : Galvanized andwhite chromated

U-strut 600

For siffening the cubicleframe and as a mountingcomponent for the hingedframe and the unit support inthe SE cubicle, nominaldimension 600.Material: SteelSurface : Galvanized andwhite chromated

Universal strap

For securing the hinged frame and the unitsupport.

Material: SteelSurface : Galvanized and white chromated

Universal adaptor,U -strut

The U-strut is a universal assembly part for the depth, the height andthe width.

13

19" fixed tray

Legend:

1 19" unit support

1.1 U strut 600

1.3 Universal strap

1.4 Hexagon head screwM6 x 12

2 19" unit support 2000

The 19" unit support is secured in the

cubicle frame by means of items 1.1 to

1.3 as well as the hexagon head

screw, item 1.4.

14

19" unit support

This support unit provides for variable fixed installation in the SE cabinet. For installation of 19"front panels and 19" units. For mounting in the system holes of the U-struts and the universalstrap.

Material: SteelSurface: Galvanized and white chromate

RU units For cubicle nominal dimension19" unit support 12 RU

19 RU

24 RU

33 RU

37 RU

42 RU

46 RU

-

1000

1200

1600

1800

2000

2200

Legend:

2 versions:

A - Unit support for total height of cabinet for fastening inthe field of the fish-plate

B - Support unit as individual part of any length. (n x U, 1U = 44.45 mm)

15

19" hinged frames

19" hinged frames can be fitted in cubicles with a nominal width of 600 mm and above. Specialadapter parts make it possible to mount these in 800 and 900mm wide cubicles even withoutusing spacer struts. The hinged frames can be mounted both at the left and the right, at anyheight.

Material: Steel

Surface: Galvanized and white chromated

Legend

1. 19" hinged frame2. U - strut 6004. Universal strap5. Hexagon head screw M6 x 126. Frame SE7. Support track8. Hinge9. Screw lock

16

19" hinged frame, opening angle 180 degrees

− the smallest useful hinged frame height is 3 RU− for the total installation height see the table below− depending upon the hinge used the opening angle is 130 degrees or 180 degrees− the maximum installation depth when using the available width (cubicle width 600 mm) is 237

or 192 mm respectively, see dimension sheet on 2.1, 1.2, 2.0

ItemNumber

Designation For cubicle,nominal

dimension

Quantityper set

Divisionsrequiredn x RU

RU = 44, 451.1 3

69

1213172022252731354044

-----

1000-

1200--

1600180020002200

11111111111111

58

111415192224272933374246

1.2 369

1213172022252731354044

-----

1000-

1200--

1600180020002200

1111111111111

710131617212426293135394448

1.3 369

1213172022252731354044

-----

1000-

1200--

1600180020002200

11111111111111

710131617212426293135394448

17

ItemNumber

Designation For cubicle,

nominal

dimension

Quantity per

set

Divisionsrequiredn x RU

RU = 44, 45

2 U -strut 600 - 1 -

3 U -strut with

strap

400

500

600

800

900

1000

1200

1

1

1

1

1

1

1

-

-

-

-

-

-

-

4 Universal strap - 1 -

5 Hexagon head

screw

M6 x 12

- 100 -

5.1 Hexagon head

screw

M6 x 12

- 1000 -

18

19" hinged frame, opening angle 180 degrees

Kit ready for installation, consisting of:− Hinged frame complete− fittings and lock parts− support tracks− universal strap and fasteners

19" fastening planecentral in the cubicle1) Max. Installation depth192 mm

19" fastening plane 6 mmfrom the center2) Max. Installation depth204 mm

19

Doors

There are four standard door styles available. The style required depends entirely on theapplication and the price level. All doors are manufactured from zinc seal material. Doors can behinged on left or right hand side.

Style ASingle point lockingProtection class IP 40

Style BThree point locking (economy)Protection class IP 54Unchanging lock

Style CThree point locking (deluxe)Protection class IP 54Choice of handles and locks

Style DThree point locking (industrial)Protection class IP 54 & EMI

Door accessories

Doors can be provided with any of the following:1) Cut outs to your drawings

2) Perspex inserts

3) Ventilation louvers

4) Ventilation with vermin protection

5) Ventilation with filter protection

6) Fans

7) Labelled to your requirement

20

Door – style A. Single point locking Protection class: IP 40

Standard door is supplied with single point cam style lock, which is key operated. The doublebeard lock illustrated is an extra cost option.

Material: steel Surface (door plate): galvanized

Legend:

1 - Hinge

2 - Bolt

3 - Hexagon head screw M 6 x 12

5 - Door plate

6 - Double beard key

7 - Lock support

8 - Hexagon nut, flat

9 - Rod lock

10 - Hexagon head screw M 5 x 20

11 - Centre lock

12 - Hexagon head screw M 6 x 12

13 - Spacer ring

14 - Key guide

21

Door – style B. 3 point locking (Economy)Protection class: IP 54

This three point locking system does not allow different lock/ handle options. Full rubber seal isfitted to this style door.

Material: steel Surface (door plate): galvanized

22

Door – style C. Three point locking (deluxe)Protection class: IP 54

Legend

1 Door panel

2.1 Lock mounting

2.2 Spacer ring

2.3 Rod lock

2.4 Key guide

2.5 Flat hexagon head nut

2.6 Key

2.7 Securing screw

3.1 Hinge

3.2 Hinge bolt

3.3 Rod guide

3.4 Centre lock

3.5 Locking rod

3.6 Securing screw M6 x 12

3.7 Securing screw M5 x 6

Door up to IP 54

Kit, ready for installation, hinged at right.

Consisting of: 1- off door panel1- set of lock parts, double beard lock with 3 mm

pin1- off double beard key for 3 mm

pin1- set door fittings

Material: Steel

Surface :(door panel): Primed painted RAL

705 structuredPrimed painted RAL7032 structured

23

Door – style C. Three point locking (deluxe)Fittings, front overlapping door

Door fittings A

for securing the door to theframe post, "Profile V"(Profile with one flange).

Delivered condition:Packed in sets.

Note:Doors up to nominal heightof 1400 mm are fitted onlywith 2 hinges.

Legend

1 Hinge

2 Hinge Pin

3 Locking Rod

4 Rod Guide

5 Latch Plate

6 Screws M6 x 12

24

Door – style C. Three point locking (deluxe)Fittings, rear overlapping door

Note:Doors up tonominal height of1400 mm arefitted only with 2hinges.

25

Door – style C. Three point locking (deluxe)Locking parts, removable handle

Legend:

1 Hexagon head screw M5 x 20

2 Rod lock

3 Actuator pin

4 Lock support

5 Spacer ring

6 Key guide

7 Key

8 Door panel

9 Hexagon nut, flat

26

Door – style C. Three point locking (deluxe)Locking parts, fixed handle

Legend:

1 Hexagon head screw M5 x 20

2 Rod Lock

3 Lock support

4 Spacer ring

5 Actuator handle, complete

6 Door panel

Legend:

1 Hexagon head screw M5 x 20

2 Rod lock

3 Lock support

4 Spacer ring

5 Actuator handle, complete

6 Door panel

27

Door – style C. Three point locking (deluxe)Filler profile

The filler profile used for mounting the labelling strip and for the locking rod with the door closed.

Material: Aluminum

Note:If spacer posts are to be fitted to the door side ofthe cubicle frame, for example in order to installtwo overlapping doors, then two filler profiles withthe nominal length of the relevant door width mustbe provided.

Dimension B = nominal width

28

Door- accessories and fittings

Fits to the V style profile by means of M 6 x 12 screws. Ideal forretro-fitting door.

door opening: 180 degreesmaterial : steelfinish : chromated

This hinge is fitted to the front of any profile. Holes have to be flowdrilled in the profile and tapped for M5 screw.

door opening: 180 degreesmaterial : steelfinish : chromated

The door stay prevents door from swinging shut in windyenvironment. Can be fitted to any size door.

material: steelfinish : galvanized and chromated

The door latch fits to the V profile to facilitate locking of door.

material: steelfinish : galvanized and chromated

This door rubber suits the industrial three point locking system.Designed to work with the EMI Shielding Strips.

29

Door- accessoriesDocument holder

Fitted to inside of front or rear door as requested.

Material: 1.5-mm steel sheetSurface: galvanized, painted

30

Door- accessoriesFlap door

The fascia will be mounted to the rack by means of a special filler profile. If combined with a door,the change over from the fascia to the door is realised by connecting profile. The diagram belowshows a door fitted to the top half of cabinet. Door is hinged horizontally.

Legend:

1 Fascia panel

2 Screw plug

3 Fascia fitting

4 Additional locking angle for the screwplug not with 200 mm high fascia

5 Cage nut M 10

6 Filler profile

31

Panels

All stand panels are fitted to the frame by means of special countersunk screws. The screws havea cutting-ring in the head that penetrates the painted surface and allows earthing. There is noneed earth panel to frame with wire lead.

Material: steelSurface: zinc seal and painted

View showing attachment of panels to the frame.

32

Panels: hang- on rear cover plate

This rear panel is easily mounted by the use of key locking fasteners.

Material: steel sheetSurface: galvanized

33

Panels- bolt together panel

This panel allows for the installation of cabinets in a row. Clearance holes are punched for thebolt-together spacer to penetrate.

34

Panels: accessories

Countersunk screw M6 x 21

Plastic clip fitted to screw to hold panel spacersecurely even when panel is removed.

Material: steelSurface : galvanized and chromated

Panel Spacer

This distance spacer allows the panel to sit hushwith the outer edge of the frame.

Material: aluminum

35

Roof options

Roof Panel IP 54

This style of Roof allows the use of transportbrackets without compromising the 2 P 54protection of equipment. A foam gasket is fittedbetween the cabinet and roof panel.

Protection class: IP 54

Material: steel

Surface: painted

Raised Roof Panel IP 54 style

Offers both fitting of transport brackets andventilation.Height form top 22 mm

Protection class: IP 10

Material: steel

Surface: painted

36

Raised roof options

Perforated roof panel

Ideally suited for use where heat build up isa problem. Prevents objects larger than12mm form entering the top of the cabinet.

Protection class: IP 20

Material: steel

Surface: painted

Labyrinth roof

Simultaneously offer good outflow andadditionally prevents penetration ofmechanical objects entering the cabinet.

Protection class: IP 40

Material: steel

Surface: painted

37

Base options

Plinth Modular Design

Suits any rack size, side or bottomcable entry. Base entry aftermounting to rack possible.

Material: steel

Surface: painted

Heavy Duty Mobile Base

Special dual wheel castors onsturdy U profile.

Material: steel

Surface: painted

Cable Entry Plate

Protection against pest entry formcable duct side. Suitable to anysize racks.

Material: steel

Surface: painted

38

Lifting options

Overhead Lifting

1. Four lifting points required

2. Individual cabinets can be loaded to1000kg and 2000kg for a banked system.

3. Angle of lifting ropes should not bemore than 60 degrees from vertical.

Lifting Hook

Fixed to existing M12 hole in die-castcorner of cabinet. Has anti twist featuredesigned in.

Material: steelSurface: galvanized and white chromated

Lifting Angle

Designed to lift cabinets, which arebanked together.

Material: steelSurface: painted or galvanized

39

Shielding components

Shielding components have been specifically designed for our SE Cabinet range. Doors andpanels can still be removed without compromising the shielding components. Specific areas ofthe cabinet are left unpainted to ensure conductivity.

Material: Shielding fingerFinish : Tin Bronze

Contact us for shielding effectiveness figures.

40

IP 54

Cabinets can be made to suit IP 54 applications by the use of rubber gaskets in the panels anddoors. The diagram shows the door rubber seals. All panels and doors can be removed withoutcompromising the integrity IP 54 seals.

41

Dress Components

This frame covers in an optical attractive way the clearance between the rack and the built in sub-racks. It can be fitted later.2 versions are available:1. for cabinet without door2. for cabinet with door

Material and finishFrame profiles: aluminum, colorless anodizedSprings: steel, nikelized and chromated.