doors and windows.pptx

8/14/2019 doors and windows.pptx

1/22

GROUP 3Antillon ,Andrea Jade

Battad, Gio

Biag, Jomar

Bidayan ,Jeff Charles

Nisay, ClarriseRivera, Rolly

Soriano, Kenneth

Umali, Veronica

Division 8 doors and

windows


2/22

metal doors andframes

wood and plastic doorsentrance and storefront

windows

hardware

glazing

Division 8 doors and windows


3/22

-hollow metal doors are made with20,18 or 16 gage face sheets in

thicknesses of 1 3/8 and 1 3/4

-available with small vision lites, halfglass , full glass , louvered , and flush

-door swing: left hand , right hand ,

LHR,RHR

-fire rated doors: certain door location

require a fire rating for the door and

frame. C LABEL for hour rating .

Metal doors


4/22


5/22

Metal door cont.

Takeoff unit: each, note:

Type of metal

Metal gauge

Door core material

Fire rating Finish


6/22

Fire Rated Door Labels / Ratings

UL Label Rating Rating Max Glass Area

A3 HR 180 MIN 100 square

inches per leaf

B1 1/2 HR 90 MIN

100 square

inches per leaf

C 3/4 HR45 MIN 1296 square

inches per lite

D1 1/2 HR 90 MIN

Refer to local

codes

E

3/4 HR

45 MIN Refer to local

codes

1/3 HR 20 MIN1296 square

inches per lite

S SMOKE SMOKE


7/22

Types of door


8/22

Types of fire rated doors


9/22

Doorframe or door case is theframe of a doorway, including two jambs and a li

ntel, or head.

doorframe

Components of door wayLintel - A horizontal beam above a door that supports the wall

above it. (Also known as a header)

Jambs- The vertical posts that form the sides of a door frame,

where the hinges are mounted, and with which the bolt

interacts.

Sill- A horizontal beam below the door that supports the

frame

Doorstop - a thin slat built inside the frame to prevent a doorfrom swinging through when closed, which might break the

hinges.

Architrave - The decorative molding that outlines a door

frame. (called an Archivolt if the door is arched). Called door

casingor brickmoldin North America.

Door knockeris an ornamental object hinged to the outside

surface of a door and operated (by giving a knock on the door)

to get the attention of residents in the room to gain admittance.

lintel


10/22

Anatomy of a door


11/22

-steel frame are the most common type door frames and are available in14,16 and 18 gage

-frame s are made with various widths (profile) to the thickness of the

wall to which they are mounted (4 , 8 )

-unit: each, note gauge , width , height and width, width single or

double

Door frame


12/22

Steel framed door


13/22

-Vary and considerably in price , the primary determinant is veneer material .

A thin sheet of material . A layer of wood superior value or excellent grain to beglued to an interior wood .

-Unit: each,note .

-size

-hollow or solid core

-fire rating

-flushed or raised panel

-finish

Wooden doors - Wood doors are type of doors made from either solid hardwoodssuch as oak and cherry or hollow core made of plywood or laminate on either side.

Plastic doors - Plastic doors are type of doors made from plastic materials such aspolypropylene or polyvinyl chloride.

Wood and plastic doors


14/22


15/22


16/22

Anatomy of a window


17/22

-glass: thickness and types

-monolithic

-clear glass

-frosted glass

-tempered glass

-double glaze

-laminated

-glazing: settings of whatever material is installed inthe frame (glass,metal,plastic,laminate,stone) cost dependson the total amount involved,size and quality of the materialto be glazed, and the type of glazing method.

-screens: painted or galvanized steel,plastic coatedfiber glass , aluminun , or bronze.

Windows accessories


18/22

Hardware: locking devices, handles , and hinges made ofstainless steels , zinc plated steel , aluminum or bronze

Weatherstripping: vinyle, neopren , metal flanges andclips, and adhesive back foam

Mullions: vertical bars that connect adjoining sectional frames.

Sills: the bottom made of the frame made of stone, brick, precastconcret , tile , matal , or wood.width and thickness

Flashing: maybe required of the head and sill of the frame.


19/22

Hardware cost add considerably to the cost of the door

Rough hardware comprises the bolts, screws, nails, small

anchored required for the installation of the doors and

frames

Finished hardware (hinges, door closing devices, locks and

latches, locking bolts, kickplates) Is scheduled in the

specifiscation or on the drawings.

Hardware


20/22

Plates glassregular, gray, heat, absorbing, andtempered

Wire glasswhere fire retardant and safetycharacteristics are required.

Patterned glassused for a decoration or providing adegree of privacy.

Insulating glasstwo sheets of glass to increase soundand heat insulation

Types of glass


21/22


22/22

doors and windows.pptx

Documents

Transcript of doors and windows.pptx