DOOR HARDWARE HARDWARE Door Hardware ... Kaba Simplex 5000 Series Mechanical Push-Button Locks ......

TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 341

To Order – Call 509.535.1663 or 800.888.1663Pocket/Sliding D

oor Handles and Locks

DOOR HARDWARE

Door Hardware .........................341-454

Pocket/Sliding Door Handles & Locks .....341-349Flush Door Pulls .......................................................................................... 343-345

Edge Pulls ..................................................................................................................346

Sliding and Pocket Door Passage/Privacy Latches ............... 346-349

Sliding and Pocket Door Keyed Locks .....................................................349

Door Locks - Residential ......................... 350-367Emtek ............................................................................................. 351-352

Schlage Electronics ................................................................... 353-356

Schlage F-Series Handlesets ................................................. 357-358

Schlage F-Series Knobs and Levers .................................... 359-361

Schlage B-Series Deadbolts ............................................................ 362

Schlage RS-Series Interconnect .................................................... 363

Schlage Residential Parts and Latches .............................. 363-364

Schlage J-Series Handlesets (Dexter) .......................................... 364

Schlage J-Series Knobs and Levers (Dexter) ............................. 365

Schlage J-Series Deadbolts (Dexter) ........................................... 365

Schlage J-Series Parts and Latches (Dexter) ............................. 366

Brinks Push-Pull-Rotate ........................................................... 366-367

Door Locks - Commercial ....................... 368-386Schlage A-Series - Grade 2 Cylindrical Locks ................... 368-369

Schlage AL-Series - Grade 2 Cylindrical Locks ................ 370-371

Schlage D-Series - Grade 1 Cylindrical Locks .................. 372-373

Schlage ND-Series - Grade 1 Cylindrical Locks ............... 374-377

Schlage B500-Series Grade 2 Deadbolts .................................... 378

Schlage B600-Series Grade 1 Deadbolts .................................... 378

Schlage B250-Series Grade 2 Deadlatch .................................... 378

Schlage Commercial Parts and Latches ............................ 379-380

Marks 175 Series - Grade 2 Cylindrical Locks ........................... 381

Townsteel CDC-Series - Grade 1 Cylindrical Locks ................. 382

Townsteel XCE-2000-Series - Grade 1 Electronic Cylindrical Locks ....................................................... 382

Kaba Simplex 5000 Series Mechanical Push-Button Locks ........................................................................ 383

Kaba E-Plex Electronic Locks ................................................. 383-384

Lock Parts and Cylinders ......................................................... 384-386

Key Blanks/Keying Accessories ..................... 387

Door Lock Strikes and Protectors ......... 388-392Strike Plates ................................................................................. 388-390

Door Reinforcers ................................................................................. 390

Latch and Lock Guards ...................................................390-391, 404

Filler Plates & Hole Covers ...................................................... 391-392

Boring Jig Kits and Installation Templates ................................ 392

Door hardware, what don’t we carry? Ranging from door locks for both residential and commercial to strike plates and hinges. Door stops, bolts, kick plates, viewers, pulls, and filler plates. You name it, if it’s door related, we’ve probably got it.

342 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com

Builders Hardware Specialists Since 1945

DOOR HARDWARE

Pocket/Sliding Door H

andles and Locks

Replacment / Reproduction Knobs, Roses and Door Sets ........................... 393-394

Screw Cover Caps ............................................................................. 394

Padlocks .................................................... 395-396

Door Accessories ..................................... 397-417Door Flush/Surface Bolts ....................................397-404 Foot and Cane Bolts ...................................................................... 397

Door Surface Bolts ................................................................ 398-399

Door Flush Bolts and Coordinators................................. 400-402

Door Guards and Night Latches ...................................... 402-404

Door Pulls and Push Plates .................................404-405

Door Kick Plates ............................................................405

Door Stops/Holders .............................................406-414 Baseboard and Spring Stops .............................................. 406-407

Floor Mount Door Stops ...................................................... 408-410

Wall Mount Door Stops ................................................................. 408

Hinge Pin Door Stops ........................................................... 410-411

Kickdown Door Stops ........................................................... 411-412

Magnetic Door Stops and Door Holders ....................... 412-413

Overhead Door Stops .................................................................... 414

Door Stops/Holders (continued) .......................406-414

Door Knockers ...............................................................414

Door Viewers and Speakeasy Grilles .........................415

Doorbell Buttons ..........................................................415

House Numbers ....................................................415-416

Mail Slots and Boxes ............................................416-417

ADA Door Signs ............................................................417

Screen and Storm Door Hardware ....... 418-420Screen Door Latches & Pulls ........................................................... 418

Screen Door Closers ................................................................. 419-420

Screen Door Hinges.................................................................. 419-420

Door Hinges.............................................. 419-433Screen Door Hinges.................................................................. 419-420

Bi-Fold Door Hinges ................................................................. 420-421

Concealed & Invisible Hinges ........................................................ 422

Door Hinges - Residential....................................................... 423-424

Door Hinges - Commercial .................................................... 424-426

Spring Hinges & Pivots ............................................................ 427-430

Door Strap Hinges..................................................................... 431-433

Gate Hardware ......................................... 429-440Gate Spring Hinges & Pivots.................................................. 429-430

Strap Hinges ................................................................................ 431-433

Gate Spring Closers and Wheels .......................................... 433-434

Gate Pulls............................................................................................... 434

Rim Locks and Latches ............................................................ 434-436

Gate Latches and Bolts ............................................................ 436-440

Hasps & Padlock Eyes ........................................................................ 440

Door Bottoms, Thresholds and Weatherstripping ................................ 441-454

Door Thresholds ...................................................441-445

Automatic Door Bottoms ....................................445-446

Door Bottom Shoes & Sweeps ...........................447-449 Replacement Door Shoe Vinyl .................................................. 448

Door Astragals & Meeting Stiles ................................450

Weatherstrip and Gasketing ..............................451-454




DOOR HARDWARE

Pocket/Sliding Door Handles and Locks

Flush Door Pulls

Flush Door Pull

• Solid brass, snap-in design.• 20/box. Sold individually.

Product # Finish

FP221RU3 Polished Brass

FP221RU5 Antique Brass

FP221RU10B Oil Rubbed Bronze

FP221RU15 Satin Nickel

FP221RU15A Antique Nickel

FP221RU26 Polished Chrome

FP221RU26D Satin Chrome

Flush Door Pull

• Built-in prong design eliminates need for screws or brads.• Constructed of cast brass.• 20/box. Sold individually.

Product # Finish

221B15A Antique Nickel

221B-716 Aged Bronze

Flush Door Pull

• Features snap-in design.• 1/box. Sold individually.

Product # Finish

20-2600AB Antique Brass

20-2600PB Polished Brass

20-2600PC Polished Chrome

20-2600ORB Oil Rubbed Bronze

20-2600SN Satin Nickel

Flush Door Pull

• Solid brass, screws included.• 50/box. Sold individually.

Product # Finish

FP223U3 Polished Brass

FP223U5 Antique Brass

FP223U10B Oil Rubbed Bronze

FP223U15 Satin Nickel

FP223U15A Antique Nickel

FP223U19 Flat Black

FP223U26 Polished Chrome

FP223U26D Satin Chrome

Flush Door Pull

• Durable solid cast brass, screws included.• 10/box. Sold individually.

Product # Finish

FP222U3 Polished Brass

FP222U5 Antique Brass



FP222U14 Polished Nickel

FP222U19 Flat Black


Flush Door Pull

• Durable solid cast brass, brads included.• 20/box. Sold individually.

Product # Finish



https://www.thehardwarehut.com/catalog-product.php?p_ref=280777

































DOOR HARDWARE


andles and Locks

Flush Door Pull

• Durable solid cast brass, screws included.• 10/box. Sold individually.

Product # Finish


FP7178U14 Polished Nickel


FP7178U19 Flat Black


Flush Door Pull

• Solid stainless steel, exposed screw design.• Screws included.• 10/box. Sold individually.

Product # Finish

FP155U32D Brushed Stainless Steel

Sliding Door Pull

New Item! • 304 Grade stainless steel.• Concentric handle for single or double sliding doors.• Install with adhesive such as 2-part epoxy or equivalent.• 10/box. Sold individually.

Product # Door Thickness (A) Overall Width (C) Finish

DSI-3250-35 1-3/8” (35mm) 1-17/32” (39mm) Satin Stainless Steel

DSI-3250-45 1-3/4” (45mm) 1-15/16” (49mm) Satin Stainless Steel

Sliding Door Pull

New Item! • 304 Grade stainless steel.• Can be accessed from door front, back or edge.• Install with adhesive such as 2-part epoxy or equivalent.• 10/box. Sold individually.

Product # Door Thickness (A) Finish

DSI-4251-35 1-3/8” (35mm) Satin Stainless Steel


Sliding Door Pull





Sliding Door Pull



DSI-4254-100-35 1-3/8” (35mm) Satin Stainless Steel

DSI-4254-100-45 1-3/4” (45mm) Satin Stainless Steel


















DOOR HARDWARE

Flush Door Pull

• Large scale design, perfect for barn door style applications.• Requires 7/8” deep mortise, for minimum door thickness of 1-3/4”.• Overall size: 4”W x 6”H.• Cutout size: 2”W x 3-5/8”H.• Fasteners included.• 1/box. Sold individually.

Product # Finish

0070-00005SC Black

Flush Door Pull

• Perfect for barn door style applications.• Requires 7/8” deep mortise, for minimum door thickness of 1-3/8”.• Overall size: 3-3/8”W x 5-1/4”H;• Cutout size: 2-13/16”W x 3-13/16”H.• Fasteners included.• 1/box. Sold individually.

Product # Finish

0535-00489SC Black

Flush Ring Pulls

• Solid brass, includes screws.• 10/box. Sold individually.

Product # Finish

FRP175CR003 Lifetime Brass

FRP175U3 Polished Brass

FRP175U5 Antique Brass

FRP175U10B Oil Rubbed Bronze

FRP175U15 Satin Nickel

FRP175U15A Antique Nickel

FRP175U19 Flat Black

FRP175U26 Polished Chrome

FRP175U26D Satin Chrome

FRP25U3 Polished Brass

FRP25U5 Antique Brass

FRP25U10B Oil Rubbed Bronze

FRP25U15 Satin Nickel

FRP25U15A Antique Nickel

FRP25U19 Flat Black

FRP25U26 Polished Chrome

FRP25U26D Satin Chrome






















DOOR HARDWARE


andles and Locks

Edge Pulls

Pocket Door Edge Pull

• Solid brass; includes screws.• 20/box. Sold individually.

Product # Finish

EP475U3 Polished Brass

EP475U5 Antique Brass

EP475U10B Oil Rubbed Bronze

EP475U14 Polished Nickel

EP475U15 Satin Nickel

EP475U19 Flat Black

EP475U26 Polished Chrome

EP475U26D Satin Chrome

Pocket Door Edge Pulls

• Solid brass.• Includes mounting hardware.• 5/box. Sold individually.

Product # Finish

EP6125U10B Oil Rubbed Bronze

EP6125U15 Satin Nickel

Recessed Door Edge Pull

• 304 Grade stainless steel.• Minimum door thickness: 1-3/16” (30mm).• 20/box. Sold individually.

Product # Finish

YK-70 Brushed Stainless Steel

Recessed Door Edge Pull

• 304 Grade stainless steel.• Minimum door thickness: 1-3/16” (30mm).• 20/box. Sold individually.

Product # Finish

YK-W100 Brushed Stainless Steel

Sliding and Pocket Door Passage/Privacy Latches

Pocket Door Latches

• 990A/991A: Made of aluminum; 990B/991B: Made of solid brass.• Door Cutout size: 2-1/4”H x 1-3/4”W.• For 1-3/8” to 1-1/2” thick doors.• Strike plate included on privacy sets.• Built in door edge pull to easily pull the door out of the pocket.• 5/box. Sold individually.

Product # Description Finish

990B3 Passage Polished Brass

990B5 Passage Antique Brass

990A14 Passage Polished Nickel

990B26 Passage Polished Chrome

990B-613 Passage Oil Rubbed Bronze

990B-619 Passage Satin Nickel

990B-620 Passage Antique Nickel

990B-716 Passage Aged Bronze

991B3 Privacy Polished Brass

991B5 Privacy Antique Brass

991A14 Privacy Polished Nickel

991B26 Privacy Polished Chrome

991B-613 Privacy Oil Rubbed Bronze

991B-619 Privacy Satin Nickel

991B-620 Privacy Antique Nickel

991B-716 Privacy Aged Bronze
































DOOR HARDWARE

Pocket Door Latches

• Solid brass.• Door Cutout size: 2-1/4”H x 1-3/4”W.• For 1-3/8” thick doors.• Strike plate is included on privacy.• Built in door edge pull to easily pull the door out of the pocket.• 10/box. Sold individually.


SDP25U26D Passage Satin Chrome

SDL25U26D Privacy Satin Chrome

Heavy-Duty Pocket Door Latches

• Solid brass.• Door Cutout size: 2-3/4”H x 1-3/4”W.• For 1-3/8” to 1-3/4” thick doors.• Strike plate included on privacy sets.• Built in door edge pull to easily pull the door out of the pocket.• 10/box. Sold individually.


SDPA325CR003 Passage Lifetime Brass

SDPA325U3 Passage Polished Brass

SDPA325U5 Passage Antique Brass

SDPA325U10B Passage Oil Rubbed Bronze

SDPA325U15 Passage Satin Nickel

SDPA325U15A Passage Antique Nickel

SDPA325U19 Passage Flat Black

SDPA325U26 Passage Polished Chrome

SDPA325U26D Passage Satin Chrome

SDLA325CR003 Privacy Lifetime Brass

SDLA325U3 Privacy Polished Brass

SDLA325U5 Privacy Antique Brass

SDLA325U10B Privacy Oil Rubbed Bronze

SDLA325U15 Privacy Satin Nickel

SDLA325U15A Privacy Antique Nickel

SDLA325U19 Privacy Flat Black

SDLA325U26 Privacy Polished Chrome

SDLA325U26D Privacy Satin Chrome

Heavy-Duty Pocket Door Latch/Receiver For Double Doors

New Item! • Design allows for face-to-face locking with our Privacy model SDLA325 to

complete a double pocket door set.• Door Cutout size: 2-3/4”H x 1-3/4”W.• For 1-3/8” to 1-3/4” thick doors.• Built in door edge pull to easily pull the door out of the pocket.• Solid brass.• 10/box. Sold individually.

Product # Finish

SDAR32510B Oil Rubbed Bronze

SDAR325U15 Satin Nickel

SDAR325U19 Flat Black

SDAR325U26 Polished Chrome

SDAR325U26D Satin Chrome

Contemporary Pocket Door Latches

• Solid brass.• Door Cutout size: 2-1/4”H x 1-3/4”W.• For 1-3/8” to 1-5/8” thick doors.• Strike plate included on privacy sets.• Built in door edge pull to easily pull the door out of the pocket.• 5/box. Sold individually.


SDL60U10B Privacy Oil Rubbed Bronze

SDL60U15 Privacy Satin Nickel

SDP60U10B Passage Oil Rubbed Bronze

SDP60U15 Passage Satin Nickel
































DOOR HARDWARE


andles and Locks

Pocket Door Latches

• Fits 1-3/8” to 1-3/4” thick doors, standard 2-1/8” bore hole.• Push-pull retractable with 1” throw bolt.• 2-3/8” fixed backset latch with radius corner faceplate.• Includes radius corner strikeplate.• 1/box. Sold individually.


33-ORB690RD Passage Oil Rubbed Bronze

33-SN690RD Passage Satin Nickel

33-ORB680RD Privacy Oil Rubbed Bronze

33-SN680RD Privacy Satin Nickel

Pocket Door Latches

• For 1-3/8” thick doors.• Fits standard 2-1/8” round bore, 2-3/8” backset.• Features automatic latching.• 5/box. Sold individually.


1501-15P1 Passage Satin Nickel

1501-3PK1 Passage Brass

1521-15P1 Privacy Satin Nickel

1521-3PK1 Privacy Brass

Pocket Door Privacy Bolt

• Designed to be face mounted at the rear of a closed pocket door, acting as a privacy bolt to prevent door from opening. It works like a rocker switch. When pushed in, the other half pops out, physically preventing the door from returning into its pocket.

• 3/16” diameter hole may be drilled through door for emergency release.• Includes 2 screws, bite strike plate and emergency hole washer.• 10/box. Sold individually.

Product # Finish

PDB42U3 Polished Brass

PDB42U10B Oil Rubbed Bronze

PDB42U15 Satin Nickel

Sliding Door Privacy Latch

• Sliding door latch for 1-1/8” (28mm) - 1-9/16” (40mm) thick doors.• 304 grade stainless steel.• Non-handed, sliding door application only.• Strike plate included.• 5/box. Sold individually.


HC-30 Privacy Satin Stainless Steel

Sliding Door Privacy Latch with Indicator

• For 1-1/8” (28mm) - 1-9/16” (40mm) thick doors.• 304 grade stainless steel.• Red is occupied, blue is unoccupied.• Non-handed, sliding door application only.• Strike plate included.• 5/box. Sold individually.


HC-30H Privacy Satin Stainless Steel

















DOOR HARDWARE

Sliding Door Passage Latch for Thick Doors

• For 1-1/8” (28mm) - 2” (52mm) thick doors.• Thumbturn on both sides for easy access.• 304 grade stainless steel.• Non-handed, sliding door application only.• Strike plate included.• 5/box. Sold individually.


HC-30R Passage Satin Stainless Steel

Sliding Door Privacy Latch with Lever

• Sliding door latch with large lever for easy operation.• For 1-1/8” (28mm) - 1-9/16” (40mm) thick doors.• Lever projection: 1-1/4”.• 304 grade stainless steel.• Non-handed, sliding door application only.• Strike plate included.• 5/box. Sold individually.


HC-30L Privacy Satin Stainless Steel

Surface Mount Sliding Door Latch

• Slim design suitable for many applications.• 304 grade stainless steel.• Easy operation slide knob to lock and unlock.• Non-handed, includes strikeplate.• 5/box. Sold individually.

Product # Finish

HC-70 Satin Stainless Steel

Sliding and Pocket Door Keyed Locks

Folding Closet Door Lock

• For any two or four-door bi-fold installation.• Includes 2 strike options, finishing ring and two keys.• Keyed different.• For 3/4” to 1-3/8” thick doors.• Bore diameter: 1”.• 5/box. Sold individually.

Product # Finish

PB1064-US26D Brushed Chrome

PB1064-US3 Polished Brass

Sliding Pocket Door Lock

• For 1-3/8” to 1-3/4” thick doors.• Bore diameter: 1”.• Keyed different.• Includes all metal lock, jamb strike, finishing ring and two keys.• 5/box. Sold individually.

Product # Finish

BX1062-US26D Satin Chrome

BX1062-US3 Polished Brass

Sliding Door Lock

• For 1-3/8” to 1-3/4” thick doors.• Bore diameter: 1”.• One half turn of key raises tongue and prevents door from entering

pocket.• Keyed different.• Includes all metal lock, jamb strike, finishing ring and two keys.• 5/box. Sold individually.

Product # Finish

PB1068-US26D Satin Chrome

PB1068-US3 Bright Brass












DOOR HARDWARE

Door Locks - Residential



To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - ResidentialDOOR HARDW

ARE


Emtek



DOOR HARDWARE



To Order – Call 509.535.1663 or 800.888.1663D


ARE


Schlage ElectronicsFunctions F&B SERIES J SERIES

Single Cylinder Deadbolt B60 JD60

Passage Lock (hall & closet) F10 J10

Privacy Lock (bed & bath) F40 J40

Keyed Entry Lock F51A J54

Dummy Lock F170 J170

Outside Trim of Handleset F58 JH58

Inside Trim of Handleset F59 JH59

Lower Half of Handleset FE285 n/a

Keypad Entry (Auto-Lock) FE575 n/a

Keypad Entry (Flex-Lock) FE595 n/a

Schlage Touch™ Lever FE695 n/a

Keypad Deadbolt BE365 n/a

Schlage Touch™ Deadbolt BE375 n/a

Schlage Connect Deadbolt BE469 n/a

Schlage Residential Product Information

FinisHes CODE (US CODE) DESCRIPTION

505 (US L03) Lifetime Bright Brass

605 (US 3) Bright Brass

608 Satin Brass

609 (US 5) Antique Brass

613 (US 10B) Oil Rubbed Bronze (living finish)

618 Polished Nickel

619 (US 15) Satin Nickel

620 (US 15A) Antique Pewter/Nickel

621 Distressed Nickel

622 (US 19) Matte Black

625 (US 26) Bright Chrome

626 (US 26D) Satin Chrome

630 (US32D) Satin Stainless Steel

716 (US 11P) Aged Bronze

newcoMing soon

newcoMing soon

DOOR HANDING

Handing of all doors is determined from the exterior of the room’s entrance.

• If the hinge is on the left side of the door, the door is “left hand” (LH)

• If the hinge is on the right side of the door, the door is “right hand” (RH)

• To order a handed product, please specify (LH) or (RH)

• To order a handleset, handing is still determined from the exterior ofthe door. We will use that information to determine the handing for the inside of the door.

inside

inside

outside

outside

lHleft hand

RHright hand

hinge

hinge

hinge

hinge

DOOR PREPARATION (for knob & levers)

2-1/8"54 mm

1"25 mm

2-1/4"57 mm

2-3/8" or 2-3/4"60 mm or 70 mm

7/8" or 1" dia.20 mm or 25 mm

Download Templates at thehardwarehut.com



DOOR HARDWARE



Schlage Electronics

BE375 Touch™ Electronic Deadbolt

New Item! With Schlage Touch™ no key means there’s nothing to lose, nothing to fiddle with and for would-be intruders, no cylinder to pick. All in a slim pro-file that’s as sleek as it is strong.Features:• Numeric touchscreen - fingerprint resistant, works in the rain and when

you’re wearing gloves.• Slim profile, works with screen doors.• LED Down lighting.• 2-Year battery life with 9V battery backup.

Specifications:• Function: BE375 Touchscreen Deadbolt - Deadbolt retracted by

entering valid user code then rotating outside thumbturn, or by inside thumbturn. Deadbolt thrown by using outside thumbturn after pressing Schlage button, or by inside thumbturn.

• Certification: ANSI/BHMA Grade 2 certified.• Warranty: 3 year electronics, limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” crossbore, 1” edge bore.• Door Thickness: 1-3/8” to 1-3/4”.• Codes: 2 pre-set unique 4-digit user codes, storage of up to 19 access

codes.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1” throw.• Latch Faceplate: 1” x 2-1/4”.• Product Dimensions: 3”W x 5.4”H.

Product # Style Stock Finishes

BE375-CAM Camelot 619, 716

BE375-CEN Century 619, 622, 625, 626, 716

FE695 Touch™ Electronic Lever

New Item! With Schlage Touch™ no key means there’s nothing to lose, nothing to fiddle with and for would-be intruders, no cylinder to pick. All in a slim pro-file that’s as sleek as it is strong.Features:• Numeric touchscreen - fingerprint resistant, works in the rain and when

you’re wearing gloves.• Slim profile.• LED Down lighting.• 2-Year battery life with 9V battery backup.

Specifications:• Function: FE695 Touchscreen Lever - Unlocked by valid user code

from outside. Inside lever always unlocked. Interior switch sets lock to unlocked or automatic re-locking modes.

• Certification: ANSI/BHMA Grade 2 certified.• Warranty: 3 year electronics, limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” crossbore, 7/8” edge bore.• Door Thickness: 1-3/8” to 1-3/4”.• Codes: 2 pre-set unique 4-digit user codes, storage of up to 19 access

codes.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1/2” throw.• Latch Faceplate: 1” x 2-1/4”.• Product Dimensions: 3”W x 5-3/8”H.


FE695-CAMXACC Camelot x Accent 619, 716

FE695-CENXLAT Century x Latitude 619, 622, 625, 626, 716






To Order – Call 509.535.1663 or 800.888.1663D


ARE

BE365 Electronic Keypad Deadbolt

Innovative Turn Lock feature allows you to lock & leave without a key. Ideal for front doors, side & back doors, garage entry doors, etc.

Features:• Wear-resistant silicone coated keypad.• Manual bolt throw ensures the bolt is engaged.• Warning alert sounds after 4 incorrect codes entered and lock disabled

for 30 seconds.• Easy installation, no need to run wires.• Manual key override.• Low battery indicator.• Battery operated with over 3 year battery life.

Specifications:• Function: BE365 Keypad Deadbolt - Deadbolt thrown from outside

by keyway turn after pressing Schlage button or by inside thumbturn. Deadbolt retracted from outside by entering valid user code then rotat-ing keyway turn or by inside thumbturn. Key can be used to unlock as backup.

• Certification: ANSI/BHMA Grade 2 certified.• Warranty: 3 year electronics, limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” crossbore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Codes: 2 pre-set unique 4-digit user codes, storage of up to 19 access

codes.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1” throw.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.• Product Dimensions: 3”W x 5-5/8”H.


BE365-CAM Camelot 619, 716

BE365-PLY Plymouth 605, 619, 626, 716

Schlage BE365 Electronic Deadbolt Extra Thick Door Kit

• For use with Schlage BE365-Series Electronic Deadbolts.• Thick Door Kit for a 1-7/8” (48mm) to 2-1/2” (64mm) thick door.• 1/box. Sold individually.

Product #

02-007

FE575 Electronic Keypad Entry with Auto-Lock

Automatically relocks after 5 seconds; no need to remember to relock the door - The perfect solution for storage and utility rooms, cleaning closets, etc...

Features:• Wear-resistant silicone coated keypad.• Manual bolt throw ensures the bolt is engaged.• Easy installation, no need to run wires.• Warning alert sounds after 4 incorrect codes entered and lock disabled

for 30 seconds.• Manual key override.• Low battery indicator.• Battery operated with over 3 year battery life.

Specifications:• Function: FE575 Keypad Entry with Auto-Lock - Auto-locking, au-

tomatically re-locks after 5 seconds. Unlocked by valid user code from outside. Inside knob or lever always unlocked. Key can be used to unlock as backup

• Certification: ANSI/BHMA Grade 2 certified.• Warranty: 3 year electronics, limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” crossbore, 1” edge bore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Codes: 2 pre-set unique 4-digit user codes, storage of up to 19 access

codes.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1/2” throw.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.• Product Dimensions: 3”W x 5-3/4”H.


FE575-PLYXELA Plymouth x Elan 626







DOOR HARDWARE


FE595 Electronic Keypad Entry with Flex-Lock

Flexibilty to choose; switch from automatic relocking to unlocked as needed. Provides additional layers of keyless security & protection inside your home or office.

Features:• Wear-resistant silicone coated keypad.• Manual bolt throw ensures the bolt is engaged.• Easy installation, no need to run wires.• Warning alert sounds after 4 incorrect codes entered and lock disable for

30 seconds.• Manual key override.• Low battery indicator.• Battery operated with over 3 year battery life.

Specifications:• Function: FE595 Keypad Entry with Flex-Lock - Flex-locking, switch

between unlocked or automatic re-locking. Unlocked by valid user code from outside. Inside knob or lever always unlocked. Key can be used to unlock as backup.

• Certification: ANSI/BHMA Grade 2 certified.• Warranty: 3 year electronics, limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” crossbore, 1” edge bore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Codes: 2 pre-set unique 4-digit user codes, storage of up to 19 access

codes.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1/2” throw.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.• Product Dimensions: 3”W x 5-3/4”H.


FE595-CAMXACC Camelot x Accent 619, 716

FE595-CAMXGEO Camelot x Georgian 609, 619

FE595-PLYXELA Plymouth x Elan 626

FE595-PLYXPLY Plymouth x Plymouth 605

FE285 Entrance Lower Handleset w/Interior Lever

• Lower half of front entryset only, no deadbolt, to be used with an existing Deadbolt or Electronic Deadbolt.

• Adjustable through-bolt at bottom of handle slides up and down 1-1/2” to accommodate a variety of pre-existing holes.

Specifications:• General: Minimum 5-1/2” Center-to-Center distance recommended

between cross bore holes.• Warranty: Limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” crossbore, 1” edge bore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1/2” throw.• Latch Faceplate: 1” x 2-1/4”.


FE285-CAMXACC-LH/RH Camelot x Accent 619, 716







To Order – Call 509.535.1663 or 800.888.1663D


ARE

Schlage F-Series Handlesets

F-Series Handleset Exterior - Addison

Schlage F-Series Handleset Features:• Adjustable components on deadbolt and grip to fit on existing, pre-

drilled doors.• Heavy, one-piece construction protects against prying.• Snap & Stay™ holds deadbolt in place during installation.

Specifications:• Function: F58 Handleset/Entrance Lock Exterior. Outside Grip and

and Deadbolt Trim. Pair with an F59 Interior Trim for a complete handle-set.

• Certification: ANSI/BHMA A156.36, 2010, Grade 1 Auxiliary Lock.• Warranty: Limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” crossbores, 1” edge bores.• Door Prep: Min. 5-1/2” center-to-center between cross bore holes.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latches.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.

Product # Function Stock Finishes

F58-ADD Single Cylinder 619, 621, 622, 716

F-Series Handleset Exterior - Camelot


F58-CAM Single Cylinder 505, 613, 619, 620, 716

F-Series Handleset Exterior - Century


F58-CEN Single Cylinder 619, 622, 625, 626, 716

F-Series Handleset Exterior - Greenwich


F58-GRW Single Cylinder 619, 622, 625, 716

F-Series Handleset Exterior - Plymouth


F58-PLY Single Cylinder 505, 609, 613, 619, 620, 716








DOOR HARDWARE


F-Series Handleset Interior Trim

Specifications:• Function: F59 Handleset/Entrance Lock Interior. Inside trim, dead-

bolt, thumbturn, latches, screw and strikes.• Pair with an F58 for a complete handleset.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latches.• Latch Faceplate: 1” x 2-1/4”.• Handing required on levers as noted (LH/RH).


F59-ACC-LH/RH Accent Lever 605, 609, 613, 619, 620, 716

F59-ELA Elan Lever 605, 626

F59-FLA-LH/RH Flair Lever 605, 609, 716

F59-LAT Latitude Lever 619, 716

F59-MER-LH/RH Merano Lever 619, 716

F59-BWE Bowery Knob 622, 716, 619

F59-GEO Georgian Knob 609, 619, 620, 716

F59-ORB Orbit Knob 605, 613

F59-PLY Plymouth Knob 605, 613, 619, 625, 716

F59-SIE Siena Knob 613, 619

F-Series Handleset Interior TrimDecorative Collection

Schlage Decorative Collection offers coordinating escutcheon styles in Handlesets, Deadbolts and all functions of Knobs and Levers.

Specifications:• Function: F59 Handleset/Entrance Lock Interior. Inside trim, dead-

bolt, thumbturn, latches, screw and strikes.• Pair with an F58 for a complete handleset.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latches.• Latch Faceplate: 1” x 2-1/4”.• Handing required on levers as noted (LH/RH).


F59-LAT-CEN Latitude Lever x Century 619, 625, 716

F59-MER-CEN-LH/RH Merano Lever x Century 619, 716

F59-ACC-CAM-LH/RH Accent Lever x Camelot 619, 716

F59-ACC-ADD-LH/RH Accent Lever x Addison 619, 716, 621

F59-GEO-ADD Georgian Knob x Addison 716, 619, 621

F58/B60 Series Handleset/Deadbolt Extra Thick Door Kit

• For use with Schlage F58/F60/B60-Series Handlesets and Deadbolts.• Extra Thick Door Kit for a 2” (51mm) to 2-1/4” (57mm) thick door.• 1/box. Sold individually.

Product # Finish

61-075-619 Satin Nickel

61-075-716 Aged Bronze



















To Order – Call 509.535.1663 or 800.888.1663D


ARE

Schlage F-Series Knobs and Levers

F-Series Accent

Schlage F-Series Knob & Lever Features:• Highest residential security for a lever product.• Specify handing on dummy and storeroom functions.

Specifications:• Certification: ANSI/BHMA Grade 2; ADA-Compliant Levers.• Warranty: Limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” crossbore, 7/8” edge bore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1/2” throw.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.


F10-ACC Passage 605, 609, 613, 619, 620, 622, 716

F40-ACC Privacy 605, 609, 613, 619, 620, 622, 716

F51A-ACC Keyed Entry 605, 609, 613, 619, 620, 622, 716

F80-ACC-LH/RH Storeroom 619

F170-ACC-LH/RH Single Dummy Lever 605, 609, 613, 619, 620, 622, 716

F-Series Accent w/Addison Trim

• ANSI/BHMA Grade 2; ADA-Compliant.• Limited lifetime finish and mechanical guarantee.• Specify handing on dummy functions.


F10-ACC-ADD Passage 619, 621, 716

F40-ACC-ADD Privacy 619, 621, 716

F51A-ACC-ADD Keyed Entry 619, 621, 716

F170-ACC-ADD-LH/RH Single Dummy Lever 619, 621, 716

F-Series Accent w/Camelot Trim



F10-ACC-CAM Passage 619, 716

F40-ACC-CAM Privacy 619, 716

F51A-ACC-CAM Keyed Entry 619, 716

F170-ACC-CAM-LH/RH Single Dummy Lever 619, 716

F-Series Elan

• ANSI/BHMA Grade 2; ADA-Compliant.• Limited lifetime finish and mechanical guarantee.


F10-ELA Passage 605, 626

F40-ELA Privacy 605, 626

F51A-ELA Keyed Entry 605, 626

F80-ELA Storeroom 626

F170-ELA Single Dummy Lever 605, 626

F-Series Flair



F10-FLA Passage 605, 609, 716

F40-FLA Privacy 605, 609, 716

F51A-FLA Keyed Entry 605, 609, 716

F170-FLA-LH/RH Single Dummy Lever 605, 609, 716

























DOOR HARDWARE


F-Series Latitude



F10-LAT Passage 619, 716

F40-LAT Privacy 619, 716

F51A-LAT Keyed Entry 619, 716

F170-LAT Single Dummy Lever 619, 716

F-Series Latitude w/Century Trim



F10-LAT-CEN Passage 619, 625, 716

F40-LAT-CEN Privacy 619, 625, 716

F51A-LAT-CEN Keyed Entry 619, 625, 716

F170-LAT-CEN Single Dummy Lever 619, 625, 716

F-Series Manhattan



F10-MNH Passage 619

F40-MNH Privacy 619

F51A-MNH Keyed Entry 619

F170-MNH-LH/RH Single Dummy Lever 619

F-Series Merano



F10-MER Passage 619, 716

F40-MER Privacy 619, 716

F51A-MER Keyed Entry 619, 716

F170-MER-LH/RH Single Dummy Lever 619, 716

F-Series Merano w/Century Trim



F10-MER-CEN Passage 619, 716

F40-MER-CEN Privacy 619, 716

F51A-MER-CEN Keyed Entry 619, 716

F170-MER-CEN-LH/RH Single Dummy Lever 619, 716

F-Series Bowery w/Greyson Trim

• ANSI/BHMA Grade 2.• Limited lifetime finish and mechanical guarantee.


F10-BWE-GSN Passage 619, 622, 625, 716

F40-BWE-GSN Privacy 619, 622, 625, 716

F51A-BWE-GSN Keyed Entry 619, 622, 625, 716

F170-BWE-GSN Single Dummy Knob 619, 622, 625, 716


























To Order – Call 509.535.1663 or 800.888.1663D


ARE

F-Series Georgian



F10-GEO Passage 609, 619, 620, 716

F40-GEO Privacy 609, 619, 620, 716

F51A-GEO Keyed Entry 609, 619, 620, 716

F170-GEO Single Dummy Knob 609, 619, 620, 716

F-Series Georgian w/Addison Trim



F10-GEO-ADD Passage 619, 621, 716

F40-GEO-ADD Privacy 619, 621, 716

F51A-GEO-ADD Keyed Entry 619, 621, 716

F170-GEO-ADD Single Dummy Knob 619, 621, 716

F-Series Orbit



F10-ORB Passage 605, 609, 613, 625, 626

F40-ORB Privacy 605, 609, 613, 625, 626

F51A-ORB Keyed Entry 605, 609, 613, 625, 626

F170-ORB Single Dummy Knob 605, 609, 613, 625, 626

F-Series Plymouth



F10-PLY Passage 605, 613, 619, 622, 625, 716

F40-PLY Privacy 605, 613, 619, 622, 625, 716

F51A-PLY Keyed Entry 605, 613, 619, 622, 625, 716

F170-PLY Single Dummy Knob 605, 613, 619, 622, 625, 716

F-Series Siena



F10-SIE Passage 613, 619

F40-SIE Privacy 613, 619

F51A-SIE Keyed Entry 613, 619

F170-SIE Single Dummy Knob 613, 619

ADDITIONAL SCHLAGE STYLES AND FINISHES SHOWN ONLINE!

Visit www.thehardwarehut.com























DOOR HARDWARE


Schlage B-Series Deadbolts

B60/B62-Series Deadbolts

B60/B60 Deadbolt Features:• ANSI Grade 1 - professional grade security.• Heavy, one-piece metal construction protects against prying.• Snap & Stay™ holds deadbolt in place during installation.Specifications:• Function: B60 Single Cylinder Deadbolt - Operated with key on exte-

rior and thumb turn on interior trim.• Function: B62 Double cylinder deadbolt - Operated with key on

exterior and interior trim.• Certification: ANSI/BHMA A156.36, 2010 Grade 1.• Warranty: Limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” or 1-1/2” crossbore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1” throw.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.


B60N Single Cylinder 605, 609, 613, 619, 620, 622, 625, 626, 716

B62N Double Cylinder 605, 609, 613, 619, 620, 622, 626, 716

B60-Series Deadbolt w/Addison Trim

• Schlage Decorative Collection Deadbolt featuring Addison Trim.• All same features of standard B60 deadbolts.


B60N-ADD Single Cylinder 619, 621, 716

B60-Deadbolt Extra Thick Door Kit

• For use with Schlage B60-Series Deadbolts.• Extra Thick Door Kit for a 2” (51mm) to 4” (102mm) thick door.

Product # Finish



B60-Series Deadbolt w/Century Trim

• Schlage Decorative Collection Deadbolt featuring Century trim.• All same features of standard B60 deadbolts.


B60N-CEN Single Cylinder 619, 625, 716

B60-Series Deadbolt w/Camelot Trim

• Schlage Decorative Collection Deadbolt featuring Camelot Trim.• All same features of standard B60 deadbolts.


B60N-CAM Single Cylinder 619, 716

B81-Series One-Sided Deadbolt w/Exterior Trim Plate

Specifications:• Function: B81 One-Sided deadbolt with exterior plate. Deadbolt

thrown or retracted from interior side only. Exterior plate covers exposed prep on outside. Non-graded.

• Warranty: Limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” or 1-1/2” crossbore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1” throw.• Latch Faceplate: 1” x 2-1/4”.


B81 One-Sided Deadbolt 619, 626, 716










To Order – Call 509.535.1663 or 800.888.1663D


ARE

Schlage RS-Series Interconnect

RS210F Mechanical Interconnect Lockset

Features:• Panic-free, single motion egress meets Life & Safety code requirements.• Ideal for both new construction and renovation/aftermarket projects.• Easy to install, fits standard door preparations.Specifications:• Function: RS210F: Single Locking. Deadbolt operated by key from out-

side or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Latch retracted by lever from either side. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit.

• Certification: ANSI/BHMA A156.12-2005, Grade 2, UL 3 hour rating.• Warranty: Limited lifetime mechanical and finish.• Door Prep: Fits standard 2-1/8” crossbore; 4” or 5-1/2” center-to-center.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1” throw.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.• Handing: Reversible in field.

Product # Style Finish

RS210FACC619PLY Accent Lever w/Plymouth Trim Satin Nickel

RS210FACC716PLY Accent Lever w/Plymouth Trim Aged Bronze

What exactly is an ANSI Grade?

The American National Standards Institute (ANSI) is a private nonprofit that administers voluntary performance standards for builder’s hardware. The purpose of ANSI grades is to help identify the quality and durability of locksets through a series of operational and security tests.

ANSI grades reflect 3 levels of security and durability:

*Grade 1 certification - Highest Grade Security. The stron-gest grade ANSI recognizes for any residential or commer-cial product.

*Grade 2 certification - Higher Residential Security. Designed to offer excellent security and durability. Used mostly for residential applications and some light commercial applications.

*Grade 3 certification - Basic Residential Security. The lowest grade provided by ANSI, and the minimal accept-able quality for residential door locks

Schlage Residential Parts and Latches

F-Series Triple-Option Spring Latch

• For Schlage F-Series non-keyed sets.• Includes square and radius corner mortise and drive-in faceplates.• Adjusts to both 2-3/8” and 2-3/4” backsets.• 1” x 2-1/4” faceplates, screws included.• 1/box. Sold individually.

Product # Finish

16-210-605 Polished Brass

16-210-613 Oil Rubbed Bronze

16-210-626 Satin Chrome

F-Series Triple-Option Deadlocking Latch

• For Schlage F-Series keyed sets.• Includes square and radius corner mortise and drive-in faceplates.• Adjusts to both 2-3/8” and 2-3/4” backsets.• 1” x 2-1/4” faceplates, screws included.• 1/box. Sold individually.

Product # Finish




F-Series Deadlocking Latch, 5” Backset

• For Schlage F-Series Keyed Levers or Knob.• 1” x 2-1/4” square corner faceplate; screws included.• 1/box. Sold individually.

Product # Finish

















DOOR HARDWARE


B60/B500-Series Triple-Option Deadbolt Latch

• For Schlage B60/B500-Series Deadbolts.• Includes square and radius corner mortise and drive-in faceplates• Adjusts to both 2-3/8” and 2-3/4” backsets.• 1” x 2-1/4” faceplates, screws included.• 1/box. Sold individually.

Product # Finish




B60/B560-Series Deadbolt Latch, 5” Backset

• For Schlage B60/B560-Series Deadbolts.• 1-1/8” x 2-1/4” square corner faceplate, screws included.• 1/box. Sold individually.

Product # Finish




Schlage J-Series Handlesets

J-Series Handleset Exterior - Barcelona

Schlage J-Series Handleset Features:• Proven quality at an affordable price.

Specifications:• Function: JH58 Handleset/Entrance Lock Exterior. Outside Grip and

and Deadbolt Trim. Pair with a JH59 Interior Trim for a complete handle-set.

• Certification: ANSI/BHMA A156.36, 2010 Grade 3.• Warranty: Limited lifetime mechanical and 5-year finish.• Door Prep: Fits standard 2-1/8” crossbores, 1” edge bores.• Door Prep: Min. 5” center-to-center between cross bore holes.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latches.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.


JH58-BAR Single Cylinder 605, 619, 716

J-Series Handleset Interior

Specifications:• Function: JH59 Handleset/Entrance Lock Interior. Inside trim, dead-

bolt, thumbturn, latches, screw and strikes.• Pair with an JH58 for a complete handleset.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latches.• Latch Faceplate: 1” x 2-1/4”.• Handing required on levers as noted (LH/RH).


JH59-SEV-LH/RH Seville Lever 619, 716

JH59-SOL Solstice Lever 619, 716

JH59-STR Stratus Knob 605, 619, 716












To Order – Call 509.535.1663 or 800.888.1663D


ARE

Schlage J-Series Knobs and Levers

J-Series Solstice

Schlage J-Series (Dexter) Knob & Lever Features:• Highest residential security for a lever product.• Specify handing on dummy lever functions.

Specifications:• Certification: ANSI/BHMA Grade 3; ADA-Compliant.• Warranty: Limited lifetime mechanical and 5-year finish warranty.• Door Prep: Fits standard 2-1/8” crossbore, 7/8” edge bore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1/2” throw.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.


J10-SOL Passage 619, 716

J40-SOL Privacy 619, 716

J54-SOL Keyed Entry 619, 716

J170-SOL Single Dummy Lever 619, 716

J-Series Seville

• ANSI/BHMA Grade 3; ADA-Compliant.• Limited lifetime mechanical and 5-year finish warranty.• Specify handing on dummy functions.


J10-SEV Passage 619, 716

J40-SEV Privacy 619, 716

J54-SEV Keyed Entry 619, 716

J170-SEV-LH/RH Single Dummy Lever 619, 716

J-Series Stratus

• ANSI/BHMA Grade 3.• Limited lifetime mechanical and 5-year finish warranty.


J10-STR Passage 605, 619, 716

J40-STR Privacy 605, 619, 716

J54-STR Keyed Entry 605, 619, 716

J170-STR Single Dummy Knob 605, 619, 716

J-Series Corona

• ANSI/BHMA Grade 3.• Limited lifetime mechanical and 5-year finish warranty.


J10-CNA Passage 605, 619

J40-CNA Privacy 605, 619

J54-CNA Keyed Entry 605, 619

J170-CNA Single Dummy Knob 605, 619

Schlage J-Series Deadbolts

JD-Series Deadbolts

Specifications:• Function: JD60 Single Cylinder Deadbolt - Operated with key on exte-

rior and thumb turn on interior trim.• Certification: ANSI/BHMA A156.36, 2010 Grade 3.• Warranty: Limited lifetime mechanical and 5-year finish.• Door Prep: Fits standard 2-1/8” crossbore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1” throw.• Latch Faceplate: 1” x 2-1/4”.• Cylinder: 5 pin, C keyway.


JD60 Single Cylinder 605, 619, 630, 716




















DOOR HARDWARE


Schlage J-Series Parts and Latches

J-Series Dual-Option Spring Latch

• For Schlage J-Series (Dexter) non-keyed sets.• Includes radius corner mortise and drive-in faceplates.• Adjusts to both 2-3/8” and 2-3/4” backsets.• 1” x 2-1/4” faceplates, screws included.• 1/box. Sold individually.

Product # Finish


16-254-630 Satin Stainless Steel


J-Series Triple-Option Deadlocking Latch

• For Schlage J-Series (Dexter) keyed sets.• Includes square and radius corner mortise and drive-in faceplates.• Adjusts to both 2-3/8” and 2-3/4” backsets.• 1” x 2-1/4” faceplates, screws included.• 1/box. Sold individually.

Product # Finish




J-Series Triple-Option Deadbolt Latch

• ForSchlage J-Series (Dexter) deadbolts.• Includes square and radius corner mortise and drive-in faceplates.• Adjusts to both 2-3/8” and 2-3/4” backsets.• 1” x 2-1/4” faceplates; screws included.• 1/box. Sold individually.

Product # Finish




Brinks Push-Pull-Rotate Handlesets

Brinks Rourke Keyed Entry Handleset

New Item! • Push Pull Rotate™ the hands-full door lock from Brinks Home Security.

The only door lock that opens 3 ways. Push it, pull it, or rotate it. With an elbow, hip or finger you can open the door by simply pushing on the handleset from the outside or pulling on the knob from the inside. You can also rotate the knob the traditional way.

Specifications:• Complete Entry Set: includes Rourke exterior handle, Stafford style

interior knob and deadbolt.• Certification: ANSI Grade 2 Lock• Warranty: Lifetime warranty for defects in material or workmanship• Door Prep: Fits standard 2-1/8” crossbores, 1” edge bores.• Door Thickness: 1-3/8” to 1-3/4” standard.• Backset: 2-3/8” (60mm) or 2-3/4” (70mm)• Latch: 1” x 2-1/4” square corner faceplates.• Keyway: 5 pin, KW1.

Product # Function Finish

C23072-119-4 Single Cylinder Satin Nickel

C23072-150-4 Single Cylinder Tuscan Bronze

ADDITIONAL BRINKS LOCK DESIGNS AND FINISHES SHOWN ONLINE!

Visit www.thehardwarehut.com













To Order – Call 509.535.1663 or 800.888.1663D


ARE

Brinks Push-Pull-Rotate Knobs

Brinks Stafford Knobset

New Item! • Push Pull Rotate™ the hands-full door locks from Brinks Home

Security. The only door lock that opens 3 ways. Push it, pull it, or rotate it. With an elbow, hip or finger you can open the door by simply pushing or pulling on the knob or lever.

• Hidden screws for improved appearance.

Specifications:• Warranty: Lifetime warranty for defects in material or workmanship• Certification: ANSI Grade 2 Lock.• Door Prep: Fits standard 2-1/8” crossbores, 1” edge bores.• Door Thickness: 1-3/8” to 1-3/4” standard.• Backset: 2-3/8” (60mm) or 2-3/4” (70mm).• Latch: 1” x 2-1/4” square corner faceplates.• Strike: Round corner full lip strikes 1-5/8” x 2-1/4”.• Keyway: 5 pin, KW1.


C23041-119-12 Passage Satin Nickel

C23041-150-12 Passage Tuscan Bronze

C23021-119-12 Privacy Satin Nickel

C23021-150-12 Privacy Tuscan Bronze

C23001-119-12 Keyed Entry Satin Nickel

C23001-150-12 Keyed Entry Tuscan Bronze

Brinks Push-Pull-Rotate Levers

Brinks Harper Leverset

New Item! • ANSI/BHMA Grade 2; ADA-Compliant.• Limited lifetime finish and mechanical guarantee.








Brinks Alwood Leverset

New Item! • ANSI/BHMA Grade 2; ADA-Compliant.• Limited lifetime finish and mechanical guarantee.








Brinks Deadbolts

Brinks Almarrion Deadbolt

New Item! • Features anti-pry shield for increased security and protection.• Includes an anti-drill plate, anti-pick and anti-bump spool pins.

Specifications:• Certification: ANSI Grade 2 Lock• Warranty: Lifetime warranty for defects in material or workmanship• Door Prep: Fits standard 2-1/8” crossbores, 1” edge bores.• Door Thickness: 1-3/8in.(35mm) to 1-3/4in.(44mm).• Backset: 2-3/8” (60mm) or 2-3/4” (70mm).• Latch: 1” x 2-1/4” square corner faceplates.• Strike: Square corner strike with security subplate.• Keyway: 5 pin, KW1.


C23061-119-12 Single Cylinder Satin Nickel

C23061-150-12 Single Cylinder Tuscan Bronze























DOOR HARDWARE

Door Locks - Com

mercial

A SERIES • Functions

ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door.

Non-Keyed Locks Keyed Locks

SCHLAGE ANSI

A10S F75 A53PD F109Passage LatchBoth knobs always unlocked.

A25D Exit LockBlank plate outside. Inside knobalways unlocked. Specify door thickness.

A70PD F84 Classroom LockOutside knob locked and unlocked by key. Inside knob always unlocked.

A79PD Communicating Lock With Blank PlateLocked or unlocked by key fromoutside. Blank plate inside.

A80PD F86 Storeroom LockOutside knob fixed. Entrance by keyonly. Inside knob always unlocked.

A30D F77 Patio LockPush-button locking. Turning insideknob or closing door releases button, preventing lock-out.

A40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be unlockedfrom outside with small screwdriver.Turning inside knob or closing doorreleases button.

A43D F79 Communicating LockTurn-button in outer knob locks andunlocks knob and inside thumbturn.

A85PD F93 Faculty Restroom Lock(with Indicator Cylinder)Outside knob fixed. Entrance by keyonly. Push-button in inside knobactivates visual occupancy indicator,allowing only emergency master keyto operate. Turning inside knob orclosing door releases visualoccupancy indicator. Rotation ofinside spanner-button provides lock-out feature by keeping indicatoractivated.

A170 Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.

Entrance LockTurn/push-button locking; pushingand turning button locks outside knob, requiring use of key until button is manually unlocked. Push- button locking; pushing button locks outside knob until unlocked by key or by turning inside knob.

605Bright brass

606Satin brass

609Antique

brass

612Satin

bronze

613Oil rubbed

bronze

625Bright

chromium plated

626Satin

chromium plated

629Bright

stainless steel

630Satin

stainless steel

643eAged

bronze

Finishes

Door Locks - Commercial


To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - Comm

ercialDOOR HARDW

ARE


Schlage A-Series - Grade 2 Cylindrical Locks

A-Series Plymouth

Schlage A-Series Knob & Lever Features:• Medium traffic commercial and heavy-duty residential locks.• Original A-Series cylindrical chassis with heavy duty spring cages.

Specifications:• Certification: ANSI/BHMA A156.2, 2011, Series 4000, Grade 2; UL Listed

for 3-hour fire door.• Warranty: Commercial: three-year limited.• Door Prep: Fits standard 2-1/8” crossbore, 1” edge bore.• Door Thickness: 1-3/8” to 1-7/8” standard.• Backset: 2-3/8” or 2-3/4” backset latch standard. 3-3/4” and 5” backset

links optional.• Latch: 7/8” housing diameter, 1/2” throw, deadlocking on keyed and

exterior functions.• Latch Faceplate: 1” x 2-1/4” square corner standard, 1-1/8” x 2-1/4” or

drive-in optional.• Cylinder: 6 pin, C keyway standard.


A10S-PLY Passage 605, 612, 626

A25D-PLY Exit Latch 626

A40S-PLY Privacy 605, 612, 626

A170-PLY Single Dummy 605, 626

A53PD-PLY Entrance 605, 612, 626

A70PD-PLY Classroom 612, 626

A80PD-PLY Storeroom 612, 626

A-Series Orbit

• ANSI/BHMA Grade 2.


A10S-ORB Passage 605, 613, 626

A40S-ORB Privacy 605, 613, 626

A170-ORB Single Dummy 605, 613

A53PD-ORB Entrance 605, 613, 626

A70PD-ORB Classroom 613, 626

A80PD-ORB Storeroom 626

A-Series Georgian

• ANSI/BHMA Grade 2.


A10S-GEO Passage 605, 609

A40S-GEO Privacy 605, 609

A170-GEO Single Dummy 605, 609

A53PD-GEO Entrance 605, 609

A-Series Levon

• ANSI/BHMA Grade 2; ADA Compliant.• A53PD-ORBXLEV features Orbit Knob exterior trim.


A10S-LEV Passage 613, 626

A25D-LEV Exit Latch 626

A40S-LEV Privacy 613, 626

A53PD-ORBXLEV Entrance 613, 626

ADDITIONAL SCHLAGE A-SERIES STYLES, FUNCTIONS AND FINISHES

AVAILABLE BY SPECIAL ORDER.

CALL US TODAY FOR A QUOTE!
























DOOR HARDWARE

Door Locks - Com

mercial


Schlage AL-Series - Grade 2 Cylindrical Locks

AL • Functions


Non-Keyed Locks Keyed Locks

AL10S F75

SCHLAGE ANSI

Passage LatchBoth levers always unlocked.

AL25D Exit LockBlank plate outside. Inside leveralways unlocked. Specify door thickness.

AL40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be unlocked from outside with small screwdriver, not included. Turning inside lever or closing door releases button.

AL44S Hospital Privacy LockPush-button locking. Unlocked from outside by turning emergency turn-button. Turning inside lever or closing door releases button.

AL170 Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.

AL50PD F82 Entrance/Office LockPush-button locking. Push-buttonlocks outside lever until unlockedwith key or by rotating inside lever.

AL53PD F109 Entrance LockTurn/push-button locking; pushingand turning button locks outside leverrequiring use of key until button ismanually unlocked. Push-buttonlocking; pushing button locks outsidelever until unlocked by key or byturning inside lever.

AL70PD F84 Classroom LockOutside lever locked and unlocked bykey. Inside lever always unlocked.

AL80PD F86 Storeroom LockOutside lever fixed. Entrance by keyonly. Inside lever always unlocked.

AL85PD F93 Faculty Restroom Lock(with Indicator Cylinder)Outside lever fixed. Entrance by keyonly. Push-button in inside leveractivates visual occupancy indicator,allowing only emergency masterkeyto operate. Turning inside lever orclosing door releases visualoccupancy indicator. Rotation ofinside spanner-button provides lock-out feature by keeping indicatoractivated.

SCHLAGE ANSI

605Bright brass

606Satin brass

609Antique

brass

612Satin

bronze

613Oil rubbed

bronze

625Bright

chromium plated

626Satin

chromium plated

629Bright

stainless steel

630Satin

stainless steel

643eAged

bronze

Finishes

LHLeft hand

Inside

Outside

Outside

Inside

LRBLeft handReverse bevel

RHRight hand

RRBRight hand

Reverse bevel

Door Handing

All Schlage locks are reversible. Hand information is necessary to ensure proper cylinder orientation in keyed functions, and finish of latchbolt and strike for locks that are to be installed on reverse bevel doors. Follow the diagram to correctly determine the hand of the door.


To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - Comm

ercialDOOR HARDW

ARE

Schlage AL-Series - Grade 2 Cylindrical Locks

AL-Series Saturn

Schlage AL-Series Lever Features:• For high traffic commercial applications.• Designed to deliver ADA compliant accessibility and constant, reliable

performance.• The AL-Series is best for buildings with medium to high traffic flow, such

as interior office doors, banks, retail spaces and hotel guest areas.

Specifications:• Certification: ANSI/BHMA A156.2 Series 4000, Grade 2; UL Listed for

3-hour fire door.• Warranty: Commercial: three-year limited.• Door Prep: 2-1/8” crossbore with 5/16” thru-bolt holes, 7/8” or 1” edge

bore.• Door Thickness: 1-3/8” to 1-7/8” standard.• Backset: 2-3/4” backset latch standard. 2-3/8”, 3-3/4” and 5” optional.• Latch: 1/2” throw, deadlocking on keyed and exterior functions.• Latch Faceplate: 1-1/8” x 2-1/4” square corner standard, drive-in op-

tional.• Cylinder: 6 pin, C keyway standard.


AL10S-SAT Passage 605, 613, 626

AL170-SAT Single Dummy 605, 613, 626

AL25D-SAT Exit Latch 613, 626

AL40S-SAT Privacy 605, 613, 626

AL50PD-SAT Entrance/Office 605, 613, 626

AL53PD-SAT Entrance 605, 613, 626

AL70PD-SAT Classroom 605, 613, 626

AL80PD-SAT Storeroom 605, 613, 626

AL/ND Series Thru-Bolt Boring Jig

• For through bolts on AL and ND Series Schlage Commercial Door Levers.• 1/box. Sold individually.

Product #

M204-198

ADDITIONAL SCHLAGE AL-SERIES STYLES, FUNCTIONS AND FINISHES














DOOR HARDWARE

Door Locks - Com

mercial


Schlage D-Series - Grade 1 Cylindrical Locks

D Knobs • Functions


SCHLAGE ANSI

Non-Keyed Locks

D10S F75 Passage LatchBoth knobs always unlocked.

SCHLAGE ANSI

Keyed Locks

D53PD F109 Entrance LockTurn/push-button locking; pushingand turning button locks outside knob,requiring use of key until button ismanually unlocked. Push-buttonlocking; pushing button locks outsideknob until unlocked by key or byturning inside knob.

D60PD F88 Vestibule/Classroom SecurityLockLatch retracted by key from outsidewhen outside knob is locked by key ininside knob. Inside knob is alwaysunlocked.

D66PD F91 Store LockKey in either knob locks or unlocksboth knobs.

D70PD F84 Classroom LockOutside knob locked and unlocked bykey. Inside knob always unlocked.

D72PD F80 Communicating LockKey in either knob locks or unlockseach knob independently.

D73PD F90 Corridor LockLocked or unlocked by key fromoutside. Push-button locking frominside. Turning inside knob or closingdoor releases button.

D80PD F86 Storeroom LockOutside knob fixed. Entrance by keyonly. Inside knob always unlocked.

D80PDEL Electrically Locked (Fail Safe)Outside knob continuously lockedelectrically. Unlocked by key outsideor by switch or power failure.Auxiliary latch deadlocks latchboltwhen door is closed. Inside knobalways free for immediate exit.

D25D Exit LockBlank plate outside. Inside knobalways unlocked.

D40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be openedfrom outside with small screwdriver.Turning inside knob or closing doorreleases button.

D44S Hospital Privacy LockPush-button locking. Unlocked fromoutside by turning emergency turn-but-ton. Turning inside knob or closingdoor releases button.

D170 Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.

SCHLAGE ANSI

Keyed Locks

D80PDEU Electrically Unlocked (FailSecure)Outside knob continuously lockeduntil unlocked by key or electriccurrent. Auxiliary latch deadlockslatchbolt when door is closed. Insideknob always free for immediate exit.

D82PD F87 Institution LockBoth knobs fixed. Entrance by key ineither knob.

D85PD F93 Faculty Restroom Lock(with Indicator Cylinder)Outside knob fixed. Entrance by keyonly. Push-button in inside knobactivates visual occupancy indicator,allowing only emergency masterkeyto operate. Turning inside knob orclosing door releases visualoccupancy indicator. Rotation ofinside spanner-button provides lock-out feature by keeping indicatorthrown.

Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.


To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - Comm

ercialDOOR HARDW

ARE

Schlage D-Series - Grade 1 Cylindrical Locks

D-Series Plymouth

Schlage D-Series Knob Features:• Heavy-duty for high traffic commercial applications.• Tough, dependable ANSI Grade 1 locks designed for use in military bar-

racks, back-of-house hospitality and retrofit applications

Specifications:• Certification: ANSI/BHMA A156.2 Series 4000, Grade 1; All locks UL listed

for A label single doors, 4’ x 8’.• Warranty: Commercial: three-year limited.• Door Prep: 2-1/8” crossbore, 1” edge bore.• Door Thickness: 1-3/8” to 2” standard.• Backset: 2-3/4” backset latch standard. 2-3/8”, 3-3/4” and 5” optional.• Latch: 1/2” throw, deadlocking on keyed and exterior functions.• Latch Faceplate: 1-1/8” x 2-1/4” square corner standard, drive-in op-

tional.• Cylinder: 6 pin, C keyway standard.


D10S-PLY Passage 626

D25D-PLY Exit Latch 626

D40S-PLY Privacy 626

D53PD-PLY Entrance 626

D60PD-PLY Vestibule 626

D66PD-PLY Store 626

D70PD-PLY Classroom 626

D80PD-PLY Storeroom 626

ADDITIONAL SCHLAGE D-SERIES STYLES, FUNCTIONS AND FINISHES













DOOR HARDWARE

Door Locks - Com

mercial


Schlage ND-Series - Grade 1 Cylindrical Locks

ND Levers • Functions


SCHLAGE ANSI

Non-Keyed Locks

SCHLAGE ANSI

Keyed Locks

Safe School Locks

ND10S F75 Passage LatchBoth levers always unlocked.Inside lever is always free for immediate egress. Also available with Request to Exit (RX) function.

ND50PD F82 Entrance/Office Lock Push-button locking. Push-buttonlocks outside lever until unlocked with key or by turning inside lever. Inside lever is always free for immediate egress.

ND53PD F109 Entrance Lock Turn/push-button locking; pushing and turn-ing button locks outside lever, requiring use of key until button is manually unlocked. Push-button locking; pushing button locks outside lever until unlocked by key or by turning inside lever. Inside lever is always free for immediate egress.

ND60PD F88 Vestibule Lock Latch retracted by key from outsidewhen outside lever is locked by key ininside lever. Inside lever always unlocked for immediate egress.

ND66PD F91 Store Lock Key in either lever locks or unlocksboth levers.

ND70PD F84 Classroom Lock Outside lever locked and unlocked bykey. Inside lever always unlocked for immediate egress.

ND73PD F90 Corridor Lock Locked or unlocked by key from outside. Push-button locking from inside. Turning inside lever or closing door releases button. When outside lever is locked by key it can only be unlocked by key. Inside lever always unlocked for immediate egress.

ND12D F89 Exit LockOutside lever always fixed. Insidelever always unlocked for immediate egress. Also available with Request to Exit (RX) function.

ND12DEL Electrically Locked (Fail Safe)Outside lever continuously lockedelectrically. Unlocked by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always always unlocked for immediate egress. Also available with Request to Exit (RX) function.


ND12DEU Electrically Unlocked (Fail Secure)Outside lever continuously lockeduntil unlocked by electric current.Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always unlocked for immediate egress. Also avail-able with Request to Exit (RX) function.

ND25D F89 Exit LockBlank plate outside. Inside lever always unlocked for immediate egress.

ND40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be openedfrom outside with small screwdriver.Turning inside lever or closing doorreleases button. Inside lever is always free for immediate egress.

ND44S Hospital Privacy LockPush-button locking. Unlocked from outside by turning emergency turn-button. Turning inside lever or closing door releases button. Inside lever is always free for immediate egress.

ND170 Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.

ND75PD F110 Classroom Security Lock Key in either lever locks or unlocksoutside lever. Inside lever always unlocked for immediate egress.


To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - Comm

ercialDOOR HARDW

ARE

Functions • ND LeversANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door.

SCHLAGE ANSI

Keyed Locks SCHLAGE ANSI

Vandlgard Functions: Designed to disengage outside spindle from latch when in locked condition. Inside lever is always free for immediate egress.

Safe School Locks


ND80PD F86 Storeroom Lock Outside lever fixed. Entrance by key only. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function.

ND80PDEL Electrically Locked (Fail Safe) Outside lever continuously lockedelectrically. Unlocked by key outsideor by switch or power failure.Auxiliary latch deadlocks latchboltwhen door is closed. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function.

ND80PDEU Electrically Unlocked (Fail Secure) Outside lever continuously lockeduntil unlocked by key or electriccurrent. Auxiliary latch deadlockslatchbolt when door is closed. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function.

ND82PD F87 Institution Lock Both levers fixed. Entrance by key ineither lever.

ND91PD F82 Entrance/Office Lock Push-button locking. Push-button disengages outside lever until unlocked with key or by turning inside lever.

ND92PD F109 Entrance Lock Turn/push-button locking; pushing and turning button disengages outside lever, requiring use of key until button is manually unlocked. Push-button locking; pushing button disengages outside lever until unlocked by key or by turning inside lever.

ND93PD F88 Vestibule Lock Latch retracted by key from outside when outside lever is disengaged by key in inside lever. Inside lever is always unlocked for immediate egress.

ND94PD F84 Classroom Lock Outside lever disengaged and unlocked by key. Inside lever always unlocked for immediate egress.

ND96PD F86 Storeroom Lock Outside lever always disengaged. Entrance by key only. Inside lever always unlocked for immediate egress. Also avail-able with Request to Exit (RX).

ND96PDEL Electrically Locked (Fail Safe) Outside lever continuously disengaged electrically. Unlocked by key outside or by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate egress. Also available with Request to Exit (RX).

ND96PDEU Electrically Unlocked (Fail Secure) Outside lever continuously disengaged until unlocked by key or electric current. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate egress. Also available with Request to Exit (RX).

ND85PD F93 Faculty Restroom Lock Outside lever fixed. Entrance by key only. Push-button in inside lever acti-vates visual “occupancy” indicator, allowing only emergency master key to operate. Turning inside lever or closing door releases visual occupancy indicator. Rotation of inside spin-ner-button by spanner key provides lock-out feature by keeping indicator thrown. Inside lever is always free for immediate egress.

ND95PD F110 Classroom Security Lock Key in either lever disengages or unlocks outside lever. Inside lever always unlocked for immediate egress.

ND97PD F90 Corridor Lock Locked or unlocked by key from outside. Push-button locking from inside. Turning inside lever or closing door releases button. When outside lever is locked by key it can only be unlocked by key. Inside lever is always unlocked for immediate egress.



DOOR HARDWARE

Door Locks - Com

mercial

Specialty Functions


SCHLAGE ANSI

Keyed Locks

ND25 x 80PD Storeroom Exit LockBlank plate outside. Key in fixed inside lever retracts latch. Specify per XN12-005.

ND25 x 70PD Classroom Exit LockBlank plate outside. Key locks or unlocks inside lever. Specify per XN12-004.

ND30D F77 Patio LockPush button locking. Turning inside lever or closing door releases button, preventing a lock-out. Inside lever always unlocked for immediate egress. Specify per XN12-007.

Time Out LockCaretaker SidePushing and holding button will lock inside lever (detention side) until released. Lever always retracts latch.Detention SideLever retracts latch unless outside button is depressed. Vandlgard allows inside spindle to disengage from latchwhen locked.

ND60PD Vestibule with Closed Outside LeverSame as ND60 except outside lever is closed. Inside lever always unlocked for immediate egress. Specify per XN12-001.

ND70 x 80PD Classroom by Storeroom LockKey locks and unlocks outside lever. Key in fixed inside lever retracts latch. Specify per XN12-006.

ND72PD F80 Communicating LockKey in either lever locks and unlocks own lever. Specify per XN12-002.

ND72PD Vandlgard Communicating LockCommunicating, ND72, lock with Vandlgard. Key in either lever locks and unlocks own lever. Both inside and outside levers are clutching. Specify per XN12-003.

SCHLAGE ANSI

Non-Keyed Locks

Vandlgard Functions: Designed to disengage outside spindle from latch when in locked condition. Inside lever is always free for immediate egress.

SCHLAGE ANSI

Keyed Locks

ND45

Pricing for all Speciality functions can be found on ND-10

ND Levers • Functions

LHLeft hand

Inside

Outside

Outside

Inside

LRBLeft handReverse bevel

RHRight hand

RRBRight hand

Reverse bevel

Door Handing

All Schlage locks are reversible. Hand information is necessary to ensure proper cylinder orientation in keyed functions, and finish of latchbolt and strike for locks that are to be installed on reverse bevel doors. Follow the diagram to correctly determine the hand of the door.


To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - Comm

ercialDOOR HARDW

ARE

Schlage ND-Series - Grade 1 Cylindrical Locks

ND-Series Rhodes

Schlage ND-Series Lever Features:• Heavy-duty for high traffic commercial applications; ADA Compliant.• Toughest Grade 1 cylindrical lock - ideal for use in schools, hospitals, of-

fices, retail spaces, colleges, universities and other applications.

Specifications:• Certification: ANSI/BHMA A156.2 Series 4000, Grade 1; All locks UL listed

for A label single doors, 4’ x 8’. Letter F and UL symbol.• Warranty: 10-year limited.• Door Prep: 2-1/8” crossbore, 5/16” thru-bolt holes, 1” edge bore.• Door Thickness: 1-5/8” to 2-1/8” standard.• Backset: 2-3/4” backset latch standard. 2-3/8”, 3-3/4” and 5” optional.• Latch: 1/2” throw, deadlocking on keyed and exterior functions.• Latch Faceplate: 1-1/8” x 2-1/4” square corner standard.• Cylinder: 6 pin, C keyway standard.


ND10S-RHO Passage 626

ND25D-RHO Exit 626

ND40S-RHO Privacy 626

ND50PD-RHO Entrance/Office 626

ND53PD-RHO Entrance 626

ND60PD-RHO Vestibule 626

ND66PD-RHO Store 626

ND70PD-RHO Classroom 626

ND73PD-RHO Corridor 626

ND80PD-RHO Storeroom 626

ND82PD-RHO Institution 626

Schlage AL/ND Series Thru-Bolt Boring Jig

• For through bolts on AL and ND Series Schlage Commercial Door Levers.• 1/box. Sold individually.

Product #

M204-198

ADDITIONAL SCHLAGE ND-SERIES STYLES, FUNCTIONS AND FINISHES

















DOOR HARDWARE

Door Locks - Com

mercial

Schlage B500-Series Grade 2 Deadbolts

B500-Series Commercial Deadbolts

B500-Series Deadbolt Features:• Versatile and economical Grade 2 deadbolt for medium duty commercial

and heavy duty residential applications.• ADA compliant thumbturn.Specifications:• Function: B560 Single Cylinder Deadbolt - Deadbolt thrown or re-

tracted by key outside or thumbturn inside.• Function: B562 Double Cylinder Deadbolt - Deadbolt thrown or

retracted by key on either side.• Function: B580 Door Bolt - Deadbolt thrown or retracted by trim unit

only. No exterior trim. Requires 1-1/2” cross bore prep.• Certification: ANSI/BHMA A156.5 Grade 2.• Warranty: three-year limited.• Door Prep: Fits standard 2-1/8” or 1-1/2” crossbore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Backset: Adjustable 2-3/8” or 2-3/4” backset latch.• Deadbolt: 1” throw, with saw-resistant hardened steel insert.• Latch Faceplate: 1-1/8” x 2-1/4” square corner.• Cylinder: 5 pin, C keyway.


B560P Single Cylinder 605, 609, 612, 613, 625, 626

B562P Double Cylinder 605, 609, 613, 626

B580 Thumbturn Only 605, 626

B571-Series Indicator Deadbolt

B500-Series Deadbolt Features:• ADA compliant thumbturn, ideal for use in commercial restrooms or

dressing rooms.• Includes one emergency key.

Specifications:• Function: B571 Indicator Deadbolt - Deadbolt thrown or retracted by

key outside or thumbturn inside. Outside indicator displays “IN USE” in red OR “VACANT” in green.

• Certification: ANSI/BHMA A156.5 Grade 2.• Warranty: three-year limited.• Door Prep: Fits 1-1/2” crossbore, not UL rated.• Door Thickness: 1-3/8” to 1-3/4” standard.• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1” throw.• Latch Faceplate: 1-1/8” x 2-1/4” square corner.


B571 Occupancy Indicator 626, 716

61-509 Emergency Key

Schlage B600-Series Grade 1 DeadboltsB600-Series Commercial Deadbolts

B600-Series Deadbolt Features:• Schlage’s toughest heavy-duty Grade 1 deadbolts for use in high-traffic

commercial applications.

Specifications:• Function: B660 Single Cylinder Deadbolt - Deadbolt thrown or re-

tracted by key outside or thumbturn inside.• Function: B662 Double cylinder deadbolt - Deadbolt thrown or

retracted by key on either side.• Certification: ANSI/BHMA A156.5 Grade 1. UL10B listed for A label single

doors, 4’ x 8’. Letter F and UL symbol.• Warranty: three-year limited.• Door Prep: Fits standard 2-1/8” crossbore.• Door Thickness: 1-3/4” to 2” standard.• Backset: 2-3/4” backset latch standard; 2-3/8”, 3-3/4” and 5” optional.• Deadbolt: 1” throw, with saw-resistant hardened steel insert.• Latch Faceplate: 1-1/8” x 2-1/4” square corner.• Cylinder: 5 pin, C keyway.


B660P Single Cylinder 605, 626

B662P Double Cylinder 605, 626

Schlage B250-Series Grade 2 Deadlatch

B250-Series Deadlatch

B250-Series Deadlatch Features:• The industry standard for decades the B250 is ideal for pool, apartment

and condominium gates, utility panels, etc.• 9/16” throw deadlatch resists pry-in attacks and “shimming” of the latchSpecifications:• Function: B250 Single Cylinder Deadlatch - Deadlatch retracted by

key outside or thumbturn inside. Hold-back feature standard, retains the deadlatch in a retracted position when desired.

• Certification: ANSI A156.5.• Warranty: three-year limited.• Door Prep: Fits 1-1/2” crossbore.• Door Thickness: 1-3/8” to 1-3/4” standard.• Backset: 2-3/8” standard. 2-3/4” optional.• Latch: 9/16” throw.• Latch Faceplate: 1-1/8” x 2-1/4” square corner.• Cylinder: 5 pin, C keyway.


B250PD Single Cylinder 605, 626










To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - Comm

ercialDOOR HARDW

ARE

Schlage Commercial Parts and Latches

Schlage A-Series Mortise Spring Latch

• For Schlage A-Series Passage and Privacy knobs or levers.• 11-068: 1” x 2-1/4” square corner faceplate.• 11-116: 1-1/8” x 2-1/4” square corner faceplate.• Screws NOT included.• 1/box. Sold individually.

Product # Backset Finish

11-068-605 2-3/8” Polished Brass

11-068-612 2-3/8” Satin Bronze

11-068-613 2-3/8” Oil Rubbed Bronze

11-068-626 2-3/8” Satin Chrome


11-116-612 2-3/4” Satin Bronze


11-116-626 2-3/4” Satin Chrome

Schlage A-Series Mortise Deadlocking Latch

• For Schlage A Series Keyed knobs or levers.• 11-085: 1” x 2-1/4” square corner faceplate.• 11-096: 1-1/8” x 2-1/4” square corner faceplate.• Screws NOT included.• 1/box. Sold individually.



11-085-612 2-3/8” Satin Bronze


11-085-626 2-3/8” Satin Chrome


11-096-612 2-3/4” Satin Bronze


11-096-626 2-3/4” Satin Chrome

Schlage A-Series Drive-In Spring Latch

• For Schlage A-Series Passage and Privacy knobs or levers.• 1/box. Sold individually.



11-110-626 2-3/8” Satin Chrome


11-113-626 2-3/4” Satin Chrome

Schlage A-Series Drive-In Deadlocking Latch

• For Schlage A-Series Keyed knobs or levers.• 1/box. Sold individually.



11-104-626 2-3/8” Satin Chrome


11-105-626 2-3/4” Satin Chrome

Schlage A-Series 5” Backset Link

• Use with a Schlage A-Series 2-3/8” backset latch (sold separately) for a total of a 5” backset.

• 1/box. Sold individually.

Product #

41-005

Schlage Adapter for 1-1/8” Latch Faceplate

• Fits under the latch faceplate and fills the gap on the sides of the 1” face-plates when used on a 1-1/8” wide door prep.


Product #

A501-878





























DOOR HARDWARE

Door Locks - Com

mercial

Schlage D-Series Mortise Spring Latch

• For Schlage D-Series Passage and Privacy knobs.• 1-1/8” x 2-1/4” square corner faceplate.• Screws NOT included.• 1/box. Sold individually.


14-001-626 2-3/4” Satin Chrome

Schlage D-Series Mortise Deadlocking Latch

• For Schlage D-Series Keyed knobs.• 1-1/8” x 2-1/4” square corner faceplate.• Screws NOT included.• 1/box. Sold individually.


14-047-626 2-3/8” Satin Chrome

14-019-626 2-3/4” Satin Chrome

Schlage B60/B500-Series Deadbolt Latch, Triple-Option

• Schlage Triple-Option Deadbolt Latch includes square and radius corner mortise and drive-in faceplates for Schlage B60/B500-Series Deadbolts.

• Adjusts to both 2-3/8” and 2-3/4” backsets.• 1” x 2-1/4” faceplates.• Screws included.• 1/box. Sold individually.

Product # Finish




Schlage B60/B560-Series Deadbolt Latch, 5” Backset

• For Schlage B60/B560-Series Deadbolts.• 1-1/8” x 2-1/4” square corner faceplate.• Screws included.• 1/box. Sold individually.

Product # Finish




Schlage B600-Series Mortise Deadbolt Latch

• For Schlage B600-Series Single and Double Cylinder Deadbolts.• 1-1/8” x 2-1/4” square corner faceplate.• Screws included.• 1/box. Sold individually.



12-630-626 2-3/8” Satin Chrome


12-631-626 2-3/4” Satin Chrome

Schlage B600-Series Drive-In Deadbolt Latch

• For Schlage B600-Series Single and Double Cylinder Deadbolts.• 1/box. Sold individually.


12-640-626 2-3/8” Satin Chrome

12-641-626 2-3/4” Satin Chrome

Schlage B250-Series Mortise Deadlocking Latch

• For Schlage B250-Series Deadlatch.• 1-1/8” x 2-1/4” square corner faceplate.• Screws included.• 1/box. Sold individually.




















To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - Comm

ercialDOOR HARDW

ARE

Marks 175 Series - Grade 2 Cylindrical Locks

175 Series Marks

Marks Economy 175 Series Lever Features:• Unique “clutch” mechanism radically reduces the wear due to abuse.Specifications:• Certification: ANSI-A156.2 Grade 2 Plus, UL Listed 3Hr. Fire Rating.• Warranty: Lifetime limited mechanical.• Door Prep: 2-1/8” crossbore with 5/16” thru-bolt holes.• Door Thickness: 1-5/8” to 1-7/8” standard. (For 1-3/8” door use K1704

spacer, sold separately)• Backset: 2-3/4” backset latch standard. 2-3/8” optional.• Latch: 1/2” throw, deadlocking on keyed and exterior functions.• Latch Faceplate: 1-1/8” x 2-1/4” square corner standard.• Cylinder: 6 pin, C keyway standard.


175N26D Passage 26D

175L26D Privacy 26D

175AB26D Entrance 26D

175F26D Storeroom 26D

175S26D Classroom 26D

Spacer Rings for 1-3/8” Thick Door

• For use when installing Marks 175 Series locks on 1-3/8” thick doors.• Comes as a set, one for each side of door.• 1 pr/box. Sold per pair.

Product # Finish

K1704-26D Satin Chrome

Marks Mortise Passage Latch

• For Marks passage cylindrical grade 2 leversets.• 1-1/8” x 2-1/4” square corner faceplate.• Screws NOT included.• 1/box. Sold individually.


1134N-32D 2-3/4” (70mm) Satin Stainless Steel

1138N-32D 2-3/8”(60mm) Satin Stainless Steel

Marks Mortise Privacy Latch

• For Marks privacy cylindrical grade 2 leversets.• 1-1/8” x 2-1/4” square corner faceplate.• Screws NOT included.• 1/box. Sold individually.


1134L-32D 2-3/4”(70mm) Satin Stainless Steel

1138L-32D 2-3/8”(60mm) Satin Stainless Steel

Marks Mortise Deadlocking Latch

• For Marks keyed cylindrical grade 2 leversets.• 1-1/8” x 2-1/4” square corner faceplate.• Screws NOT included.• 1/box. Sold individually.


1134A-32D 2-3/4”(70mm) Satin Stainless Steel

1138A-32D 2-3/8”(60mm) Satin Stainless Steel

Marks USA has made compliance with the Buy American Act (BAA) and American Recovery & Reinvestment Act (ARRA) easy. Marks USA is an American manufacturer of quality door hard-ware products with manufacturing facilities in Amityville, NY. Marks USA is an American brand trusted throughout the door hardware industry.















DOOR HARDWARE

Door Locks - Com

mercial

Townsteel CDC-Series - Grade 1 Cylindrical Locks

Townsteel CDC Series Sentinal

Townsteel CDC Series Features:• Buy American Act (BAA) Compliant; ADA Compliant.• Ideal for Institutional, government/military, retail and multi-family.• Features a clutched trims and independent torsion spring design to

provide effective lever support.

Specifications:• Certification: ANSI/BHMA A156.2-2011 Grade 1 certified and UL 10C

3-Hour rated.• Warranty: 10-year limited mechanical, five-year finish.• Door Prep: 2-1/8” crossbore with 5/16” thru-bolt holes.• Door Thickness: 1-3/8” to 2” standard.• Backset: 2-3/4” backset latch standard. 2-3/8” optional.• Latch: 1/2” throw, deadlocking on keyed and exterior functions.• Latch Faceplate: 1-1/8” x 2-1/4” square corner standard.• Cylinder: 6 pin, C keyway standard.


CDC-109-S-26D Keyed Entry 26D

CDC-75-S-26D Passage 26D

CDC-76-S-26D Privacy 26D

CDC-86-S-26D Storeroom 26D

CDC-90-S-26D Corridor 26D

CDC-84-S-26D Classroom 26D

Townsteel XCE-2000-Series - Grade 1 Electronic Cylindrical Locks

XCE-2000 Series Electronic Lockset with Keypad

Townsteel XCE-2000 Series Features:• Provides keypad technology integrated with and ANSI Grade 1 heavy

duty cylindrical lockset for greater security.• Two remote control terminals; one for a fire alarm system and the other

for remote release by push button.• Quick and easy to program; Multi-Color LED and sound.• Buy American Act (BAA) Compliant; ADA Compliant.

Specifications:• Function: Digital keypad lock with mechanical key override.• Applications: Interior or exterior.• Certification: ANSl/BHMAA156.2-2011 Series4000 Grade 1 and UL 1 OC

3-Hour rated.• Warranty: 10-year limited mechanical, 5-year finish.• Door Prep: 2-1/8” crossbore with 3/8” thru-bolt holes, 1” edge bore.• Door Thickness: 1-3/8” to 2” standard.• Maximum code capacity per lock: 1 master code, 10 manager codes,

90 user codes and 5 service codes.• Backset: 2-3/4” (70mm) stainless steel mortise latch standard. 1/2” throw.• Latch faceplate: 1-1/8” x 2-1/4” square corner.• Strike: ASA Strike standard (1-1/4” x 4-7/8” x 1-5/16” lip to center).• Cylinder: 6 pin solid brass cylinder, Schlage “C” keyway.• Handing: Handed, easy field reversible.• Power Supply: 4AA Battery. Up to 2 year battery life.• 1/box. Sold individually.

Product # Finish

XCE2020-26D Satin Chrome

XCE2020-10B Oil Rubbed Bronze










To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - Comm

ercialDOOR HARDW

ARE

Kaba Simplex 5000 Series Mechanical Push-Button Locks

5000 Series Heavy Duty Mechanical Lockset

Ideal for controlling access to high-traffic, security sensitive areas on com-mercial, industrial, educational, governmental and multi-unit residential settings. Perfect for locations with high turnover rates.Features:• Clutch free design—minimizes friction and wear.• Extra heavy-duty cylindrical lock; solid cast housings, solid cast zinc

levers, stainless steel cylindrical drive components.• Vandal resistant, metal pushbuttons.

Specifications:• Function: Fully mechanical push-button access control. Exterior access

by combination or key override. Egress is by interior lever and is free at all times.

• Codes: Single access code—one easy to manage code for all users.• Certification: ANSI/BHMA A156.2, Grade 1 Certified. 3-hour UL/ULC fire

rating for “A” label doors.• Warranty: 3 year limited.• Door Prep: Fits standard 2-1/8” crossbore with through bolt holes.• Door Thickness: 1-5/8” to 2” standard.• Handing: Non-handed (field reversible).• Latch/Backset: 2-3/4” backset latch standard, 1/2” throw.• Latch Faceplate: 1-1/8” x 2-1/4”.• Cylinder: 6 pin, Kaba keyway.• 1/box. Sold individually.

Product # Finish

5021XKWL-26D-41 Satin Chrome

Kaba E-Plex Electronic Locks

E-Plex 2000 Series Electronic Push-Button Lockset

Features:• Light-duty commercial cylindrical lockset, solid cast exterior housing,

solid cast levers, for use on indoor and outdoor applications.• Vandal resistant, solid metal pushbuttons• Requires no wiring to or through the door, no risk of pinched wires.• Batteries located in interior housing cover for quick replacement, lock

data saved if batteries fail.

Specifications:• Function: Key in lever cylinder, key override function• Certification: Certifications ADA approved; UL 10C Fire Rated.• Warranty: 2-year limited.• Door Prep: 2-1/8” crossbore and 3 additional thru-bolt holes.• Door Thickness: 1-5/8” to 2” standard.• Codes: 100 access codes per door. Easily programmed via keypad• Latch/Backset: 2-3/4” standard. 1/2” throw.• Latch Faceplate: 1-1/8” x 2-1/4”.• Cylinder: 6pin, Schlage C keyway.• Handing: non-handed (field reversible).• 1/box. Sold individually.

Product # Finish

E2031-XS-LL-626-41 Satin Chrome





DOOR HARDWARE

Door Locks - Com

mercial

Kaba E-Plex Electronic Locks

E-Plex 5000 Series Heavy-Duty Electronic Push-Button Lockset

Features:• Extra heavy-duty primary commercial cylindrical lockset, solid cast exte-

rior housing, solid cast levers, for use on indoor and outdoor applications.• Vandal resistant, solid metal pushbuttons• Requires no wiring to or through the door, no risk of pinched wires.• Batteries located in interior housing cover for quick replacement, lock

data saved if batteries fail.

Specifications:• Function: Key in lever cylinder, key override function.• Certification: ANSI/BHMA A156.25, Grade 1; ADA approved; Three-hour

UL/ULC Fire Rated.• Warranty: 3-year limited.• Door Prep: 2-1/8” crossbore and 2 thru-bolt holes.• Door Thickness: 1-5/8” to 2” standard.• Codes: Multiple Users - 100 codes (300 codes with optional software).• Latch/Backset: 2-3/4” backset, 1/2” throw.• Cylinder: 6pin, Schlage C keyway.• Handing: Non-handed (field reversible).• 1/box. Sold individually.

Product # Finish

E5031-XS-WL-626-41 Satin Chrome

Lock Parts and Cylinders

1-1/8” Mortise Cylinder

• C Keyway with Adams Rite cam. Includes 3/8” blocking ring and 2 keys.• Includes set screw pack B220-050 for Adams Rite locks.• For Exit Devices or Mortise Locks.• 1/box. Sold individually.

Product # Finish




1-1/4” Mortise Cylinder

• C Keyway with standard cam. Includes 3/8” blocking ring and 2 keys.• For Exit Devices or Mortise Locks• 1/box. Sold individually.

Product # Finish

20-001-626-1-1/4 Satin Chrome

Mortise Cylinders

• Schlage C Keyway, 5 pin cylinder.• Standard AdamsRite cam.• Includes .31” mortise collar with spring washer and 2 keys.• 1/box. Sold individually.

Product # Size Finish

SH-M114-SC-10B-STA2 1-1/4” Oil Rubbed Bronze

SH-M114-SC-26D-STA2 1-1/4” Satin Chrome

SH-M118-SC-10B-STA2 1-1/8” Oil Rubbed Bronze

SH-M118-SC-26D-STA2 1-1/8” Satin Chrome











To Order – Call 509.535.1663 or 800.888.1663D

oor Locks - Comm

ercialDOOR HARDW

ARE

3/8” Blocking Ring

• Blocking Ring Length: 3/8”.• For use with mortise cylinder without compression ring.• 1/box. Sold individually.

Product # Finish

36-079-037-626 Satin Chrome

1-1/8” Rim Cylinder

• Rim cylinder for use with various exit devices or night latches.• Schlage C Keyway, 5 pin cylinder.• Tail piece converts between horizontal and vertical positions.• Includes collar and standard 2.44” break-off tailpiece.• 1/box. Sold individually.

Product # Finish

R118-SC-10B-A2 Oil Rubbed Bronze

R118-SC-26D-A2 Satin Chrome

1-1/8” Rim Cylinder

• #2 Bar Rim Cylinder for use with various exit devices or night latches.• Horizontal Tail Piece• 1/box. Sold individually.

Product # Finish


20-022-612 Satin Bronze



Large Format Interchangeable Core Cylinder

• Large Format Interchangeable Core Cylinder for Schlage Locksets.• Conventional core only.• 1/box. Sold individually.

Product # Finish


Large Format IC Mortise Cylinder Housing

• Housing only, less IC core.• Includes K510-711 Adams Rite cam.• 1/box. Sold individually.

Product # Finish



• Housing only, less IC core.• Includes K510-730 straight cam for exit devices.• Furnished with compression ring and spring, and blocking ring.• 1/box. Sold individually.

Product # Finish



• Large format housing only, less IC core.• Includes .31” mortise collar with spring washer and Yale Cam.• 7-pin length.• 1/box. Sold individually.

Product # Finish

SH-ICS-26D-ST Satin Chrome

Small Format IC Mortise Cylinder Housing

• Housing only, less IC core.• Includes K510-730 straight cam for exit devices.• Furnished with compression ring and collar, spring and 1/4” blocking

ring.• 1/box. Sold individually.

Product # Finish
















DOOR HARDWARE

Door Locks - Com

mercial

Small Format IC Mortise Cylinder Housing

• Small Format Mortise IC Housing only, less core.• Straight cam.• 7-pin length.• 1/box. Sold individually.

Product # Finish Cam Type

SH-ICM7-26D-AR Satin Chrome AdamsRite

SH-ICM7-26D-SL Satin Chrome Schlage

Large Format IC Rim Cylinder Housing

• Large format housing only, less IC core.• Horizontal Tail Piece.• 1/box. Sold individually.

Product # Finish


Large Format IC Rim Cylinder Housing

• Large format housing only, less IC core.• Tail piece converts between horizontal and vertical positions.• 7-pin length.• 1/box. Sold individually.

Product # Finish

ICSR-10B Oil Rubbed Bronze

ICSR-26D Satin Chrome

Small Format IC Rim Cylinder Housing

• Small format housing only, less IC core.• Horizontal Tail Piece.• 1/box. Sold individually.

Product # Finish


Small Format IC Rim Cylinder Housing

• Small format housing only, less IC core.• 7-pin length.• Tail Piece converts between horizontal and vertical positions.• 1/box. Sold individually.

Product # Finish

ICR7-10B Oil Rubbed Bronze

ICR7-26D Satin Chrome










To Order – Call 509.535.1663 or 800.888.1663Key Blanks/Keying Accessories

DOOR HARDWARE

Key Blanks/Keying Accessories

Schlage/Dexter Key Blanks

• Nickel with a brass finish.• 100/box. Sold individually.

Product # Keyway Description

J750-061 C Keyway 5 Pin

Schlage Key Blanks

• Nickel with a brass finish.• 50/box. Sold individually.

Product # Keyway Description

35-100-C C Keyway 5 Pin

35-100-E E Keyway 5 Pin

35-101-C C Keyway 6 Pin

35-101-E E Keyway 6 Pin

35-101-F F Keyway 6 Pin

Emergency KeyB571 Indicator Deadbolts

• Emergency Key for use with Schlage B571 Indicator Deadbolts(sold separately).


Product # Finish

61-509 Brass

Keying Kit

• Set Includes: top and bottom pins, springs, cylinder caps, cap pins, key gauge, cylinder plug follower in a molded polymer case.

• 1 set/box. Sold per set.

Product #

40-134

Master Keying Pins

• For Schlage C Keyway.• Packaged in a bag of 100.• 100 bag/box. Sold per bag.

Product # Description

34-202 #2 Master Pin








Bottom Keying Pins

• For Schlage C Keyway.• Packaged in a bag of 100.• 100 bag/box. Sold per bag.

Product # Description

34-300 #0 Bottom Pin






































DOOR HARDWARE

Door Lock Filler/Strike Plates and Protectors


Full Lip Strike Plates - Square Corner

• Full lip strike plate with square corners.• 1/box. Sold individually.

Product # Finish


10-026-609 Antique Brass



10-026-620 Antique Pewter


Full Lip Strike Plates - Radius Corner

• Full lip strike with 1/4” radius corners.• 1/box. Sold individually.

Product # Finish


10-027-609 Antique Brass

10-027-612 Satin Bronze



10-027-620 Antique Pewter


Full Lip Strike Plates - Radius Corner

• Full lip strike with 1/4” radius corners.• 1/box. Sold individually.

Product # Finish

10-102-630 Stainless Steel


T-Strike Plates

• T-Strike.• 1/box. Sold individually.

Product # Finish



Extended Lip Strike Plates - Square Corner

• Width measured from center of screw hole to end of lip.• 10/box. Sold individually.

Product # Width Finish

SPE200U10B 1-1/2” Oil Rubbed Bronze

SPE225U10B 1-3/4” Oil Rubbed Bronze

SPE250U10B 2” Oil Rubbed Bronze

Extended Lip Strike Plates - Square Corner

• Width measured from center of screw hole to end of lip.• 10/box. Sold individually.


9115-605 1-1/2” Polished Brass

9115-630 1-1/2” Brushed Stainless Steel

9175-605 1-3/4” Polished Brass

9175-630 1-3/4” Brushed Stainless Steel

9102-605 2” Polished Brass

9102-630 2” Brushed Stainless Steel

9103-605 3” Polished Brass

9103-630 3” Brushed Stainless Steel






























To Order – Call 509.535.1663 or 800.888.1663D

oor Lock Filler/Strike Plates and ProtectorsDOOR HARDW

ARE

Extended Lip Strike Plates - Radius Corner

• Width is measured from the center of the screw holes to the end of the lip.



9115-630-RC 1-1/2” Brushed Stainless Steel

9115-DU-RC 1-1/2” Duro Bronze

9175-630-RC 1-3/4” Brushed Stainless Steel

9175-DU-RC 1-3/4” Duro Bronze

Deadbolt Strike Plate - Radius Corner

• 2-1/4” x 1” Radius Corner Deadbolt Strike Plate.• 1/box. Sold individually.

Product # Finish



Deadbolt Strike Plate - Square Corner

• 2-3/4” x 1-1/8” Square Corner Deadbolt Strike Plate.• 1/box. Sold individually.

Product # Finish




Deadbolt Strike Plate - Radius Corner

• 2-3/4”H x 1-1/8” W Radius Corner Deadbolt Strike.• 1/box. Sold individually.

Product # Finish



Thimble StrikeB-Series

• Schlage B-Series circular, drive-in thimble strike.• 1/box. Sold individually.

Product # Finish


A.S.A. Universal Strike Plates

• For jambs prepared for universal strike in accordance with A.S.A. Standard A115.2.


Product # Finish

3935-US3 Polished Brass

3935-US10B Oil Rubbed Bronze

3935-US26D Brushed Chrome


















DOOR HARDWARE


Security Strike Plate

• Replaces most deadbolt strikes for increased security.• 3” screws to attach to wall stud.• 5/box. Sold individually.

Product # Finish

1010-SN Satin Nickel

1010-VB Dark Bronze

Security Strike Plate

• Replaces most deadbolt strikes for increased security.• Strengthens or repairs wood jambs• 3” screws to attach to wall stud.• 5/box. Sold individually.

Product # Finish

1012 Polished Brass


1012-VB Dark Bronze

Security Latch Strike Plate

• Strengthens or repairs wood jambs• 3” screws attach to wall stud for extra security.• 5/box. Sold individually.

Product # Finish

1025 Polished Brass

1025-SSS Stainless Steel

1025-VB Dark Bronze

Dual Security Strike

• For locks with 5-1/2” to 6” centers.• Replaces standard latch & deadbolt strikes with one piece security.• Strengthens or repairs wood jambs.• 3” screws attach to wall stud for extra security.• For 1-3/4” or thicker doors.• 5/box. Sold individually.

Product # Finish

1027 Polished Brass

Wrap-Around Door Reinforcers

• Helps prevent forced entry and installs in minutes.• Includes all mounting hardware.• 1/box. Sold individually.

Product # Backset Door Thickness Finish

1-PB-CW 2-3/8” 1-3/8” Polished Brass



3-S-CW 2-3/4” 1-3/8” Satin Stainless Steel


4-S-CW 2-3/4” 1-3/4” Satin Stainless Steel


Wrap-Around Door Reinforcers

• Strengthens and repairs damaged doors.• Assists in preventing forced entry.• Fits doors 1-3/4” thick.• Center to center: 5-1/2”.• 4/box. Sold individually.

Product # Door Thickness Backset Finish

2258-PB 1-3/4” 2-3/4” Polished Brass

2258-SS 1-3/4” 2-3/4” Stainless Steel




















To Order – Call 509.535.1663 or 800.888.1663D

oor Lock Filler/Strike Plates and ProtectorsDOOR HARDW

ARE

Latch Guard for 2-3/8” Backsets

• For locksets with 2-3/8” backset.• Overall size: 2-1/2”W x 6”H.• Out-swinging doors only.• Protects latch or bolt and secures against forced entry.• 5/box. Sold individually.

Product # Finish

1085 Polished Brass


Heavy Duty Latch Guard for 2-3/4” Backset

• For Locksets with 2-3/4” backset.• 7”H x 3”W.• For Out-swinging doors only, secures against forced entry.• Protects latch or bolt, residential or commercial use.• 5/box. Sold individually.

Product # Finish

1089 Polished Brass


1090 Chrome

Lock Guard

• Overall Size: 11-1/4” x 3”.• Incorporates security frame pin to prevent separation of the door and

frame.• Covers the latchbolt area of the door and lock providing added protec-

tion from burglars, vandals, or normal abuse.• Use with mortise or cylindrical locks.• 1/box. Sold individually.

Product # Finish

LG1US2G Zinc

Bore Adapter Plates

• Reduces bore from 2-1/8” to 1-1/2”.• Use with some deadbolts & rim cylinders.• 5 pr/box. Sold per pair.

Product # Diameter Finish

1165 2-3/4” Polished Brass

1165-SN 2-3/4” Satin Nickel

1165-VB 2-3/4” Dark Bronze

Adapter/Trim Plates

• Use with 2-1/8” bore locks, Covers marred area around knob.• Allows conversion of 2-3/8” to 2-3/4” backset.• 5 pr/box. Sold per pair.




1170-SSS 3-1/2” Stainless Steel

1171 3-1/2” Antique Brass

Hole Cover/Filler Plate

• Covers lockset holes from 1/2” to 2-1/8”.• Fits doors up to 1-3/4” thick.• 5 set/box. Sold per set.




1172-VB 2-5/8” Oil Rubbed Bronze

Blank Filler Plate

• Covers holes up to 2-1/8” diameter.• 10 set/box. Sold per set.


BF-161-PC 2-5/8” Primed




















DOOR HARDWARE


Door Filler Plates

• Made of steel.• CV-86 converts 86 (mortise) cutout to type 161 2-1/4” latch cutout prep.• EF-86: Mortise Lock filler plate.• EF-161/EF-161-S: Filler plates.• HF-45: Door hinge cutout filler.• 10/box. Sold individually.

Product # Finish Overall Size

CV-86 Primed 8” x 1-1/4”

EF-86 Primed 8” x 1-1/4” x 3-/16”

EF-161 Primed 2-1/4” x 1-1/8”

EF-161-S Primed 2-3/4” x 1-1/8”

HF-45 Primed 4-1/2” x 1-3/4”

Frame Filler Plates

• FS-260-PC: ANSI strike cutout.• FF-45: Frame hinge cutout.• 10/box. Sold individually.

Product # Finish Overall Size

FF-45 Primed 4-1/2” x 1-5/8”

FS-260-PC Primed 4-7/8” x 1-1/4”

Latch Marking Chisels

• For square corner latchbolt faceplates.• 1/box. Sold individually.

Product # Size

40-031 1” x 2-1/4”

40-032 1-1/8” x 2-1/4”

Deluxe Boring Jig Kit

• This kit is supplied with the basic door fixture that will adjust from 2-3/8” to 2-3/4” backset positions and for wood doors from as thin as 1” to 2-1/2” thick.

• Includes three carbide spur bits for boring both edge-bore and cross-bore, sizes are 1”, 1-1/2” and 2-1/8”. Also included are two complete lock and strike router template kits, Stock Number LS-166A & LS-171B. To complete the kit we include a 1/2” hex drive quick-release drill adapter to chuck the bits into your drill motor, a 1-1/2” reducer ring to use with the 1-1/2” spur bit, aluminum center marker with a stainless steel point and a spring loaded corner chisel for squaring out the corners on both locksets and hinges.


Product #

BJ-115-C3

Spring Loaded Corner Chisel

• Spring loaded chisel cuts out that little round corner of wood in the mor-tise and makes it a perfect square, with just one hit from a hammer.

• Also works on hinge mortises.• 1/box. Sold individually.

Product #

CC-1

Latch and Strike Plate Template Kit

• Includes latch template, strike template and center locator.• Latch size: 1-1/8” x 2-1/4”.• T-strike size: 1-1/8” x 2-3/4”.• 1/box. Sold individually.

Product #

LS-171B














To Order – Call 509.535.1663 or 800.888.1663Replacm

ent Knobs, Roses and Door Sets

DOOR HARDWARE

Replacment Knobs, Roses and Door Sets

Keyed Mortise Lockset

• Glass knobs and trim plates.• Case-hardened steel case.• Bolt reversible to left and right handed door.• Lock bolt is key activated both inside and outside.• Requires mortise cutout.• 1 set/box. Sold per set.

Product # Finish

1139 Polished Brass

Keyed Mortise Lockset

• Knobs and trim plates.• Case-hardened steel case.• Bolt reversible to left and right handed door.• Lock bolt is key activated both inside and outside.• Requires mortise cutout.• 1 set/box. Sold per set.

Product # Finish

1129 Polished Brass

Mortise Trim Plates

• Use on various bit key mortise locksets.• Includes mounting hardware.• 1 set/box. Sold per set.

Product # Finish

1142 Polished Brass

Bit Key Mortise Lockset

• Includes: Mortise lock, faceplate, strike and 2 keys.• Case-hardened steel case - 2-3/8” backset.• Bolt reversible to left and right handed door.• Mortise cutout: 5/8” W x 4-1/8” L X 3” D.• 1/box. Sold individually.

Product # Finish

1155 Polished Brass

Glass Knob Passage Latch Set

• 2 glass knobs and rosettes, latchbolt, strikeplate and spindle.• Decorative passage latch for 2-3/8” backset applications.• Fits up to a 1-1/2” diameter bore. NOT for doors with 2-1/8” bores.• Rosette Diameter: 2-1/2”.• 1 set/box. Sold per set.

Product # Finish

1148-PB Polished Brass


1148-VB Oil Rubbed Bronze

Glass Knob Set with Rosettes

• 2 glass knobs and rosettes with spindle.• For use with various interior mortise locksets or latch sets.• Spindle size is 7mm; Rosette Diameter: 2-1/2”.• 1 set/box. Sold per set.

Product # Finish

1143 Polished Brass

Glass Knob Set with Spindle

• 2 glass knobs with spindle.• For use with various interior mortise locksets or latch sets.• Spindle size is 7mm.• 1 set/box. Sold per set.

Product # Finish

1140 Polished Brass














DOOR HARDWARE

Replacment Knobs, Roses and D

oor Sets

Knob Set with Rosettes

• 2 knobs and rosettes with spindle.• For use with various interior mortise locksets or latch sets.• Spindle size is 7mm.• Rosette Diameter: 2-1/2”.• 1 set/box. Sold per set.

Product # Finish

1137 Polished Brass

Solid Brass Knob Set with Spindle

• Knob pair with spindle.• For use with various interior mortise locksets or latch sets.• Spindle size is 7mm.• 1 set/box. Sold per set.

Product # Finish

1130 Polished Brass

Knob Set with Spindle

• Knob pair with spindle.• For use with various interior mortise locksets or latch sets.• Spindle size is 7mm.• 1 set/box. Sold per set.

Product # Finish

1135 Polished Brass

Solid Brass Rosettes

• For old style passage locks.• Screw mounted on door.• Diameter: 2-1/2”.• 1 pr/box. Sold per pair.

Product # Finish

1141 Polished Brass


Rosettes

• For old style passage locks.• Screw mounted on door.• Diameter: 2-1/2”• 1 pr/box. Sold per pair.

Product # Finish

1136 Polished Brass

Replacement Spindles

• Threaded steel replacement spindles for interior mortise type locks or latch sets.

• Spindle size is 7mm.• 1 pr/box. Sold per pair.

Product # Finish

1132 Chrome

Solid Brass Round Screw Covers - Dimpled

New Item! • Perfect solution for exposed screws.• Includes threaded insert, mounting screw not included.• 1/box. Sold individually.

Product # Finish

SCD100U10B Oil Rubbed Bronze

SCD100U15 Satin Nickel

Solid Brass Round Screw Covers - Flat

New Item! • Perfect solution for exposed screws.• Includes threaded insert, mounting screw not included.• 1/box. Sold individually.

Product # Finish

SCF100U10B Oil Rubbed Bronze

SCF100U15 Satin Nickel













To Order – Call 509.535.1663 or 800.888.1663Padlocks

DOOR HARDWARE

Padlocks

Laminated Steel Padlocks

• Laminated steel body for superior strength.• Hardened steel shackle for extra cut resistance.• 6/box. Sold individually.

Product # Description Shackle Body

1KA2004 Keyed Alike # 2004 15/16”H 1-3/4”W

1KA2008 Keyed Alike # 2008 15/16”H 1-3/4”W

1KA2086 Keyed Alike # 2086 15/16”H 1-3/4”W

1KA2359 Keyed Alike # 2359 15/16”H 1-3/4”W

Laminated Steel Padlock

• Laminated steel body for superior strength.• Hardened steel shackle for extra cut resistance.• Shackle clearance: 2-1/2” H x 3/4” W.• 6/box. Sold individually.


1LJKA2086 Keyed Alike # 2086 2-1/2”H 1-3/4”W

1LJKA3086 Keyed Alike # 3086 2-1/2”H 1-3/4”W


• Hardened steel shackle for extra cut resistance.• 9/32” diameter steel shackle.• 6/box. Sold individually.


3KA3210 Keyed Alike # 3210 3/4”H 1-9/16” W

3KA3553 Keyed Alike # 3553 3/4”H 1-9/16” W

3KA3861 Keyed Alike #3861 3/4”H 1-9/16” W


• Hardened steel shackle for extra cut resistance.• 9/32” diameter steel shackle.• Shackle clearance: 1-1/2” H x 7/8” W.• 6/box. Sold individually.


3LFKA3861 Keyed Alike # 3861 1-1/2”H 1-1/2”W

3LFKA3893 Keyed Alike # 3893 1-1/2”H 1-1/2”W


• Hardened steel shackle for extra cut resistance.• 3/8” diameter steel shackle.• Shackle clearance: 1” H x 15/16” W.• 6/box. Sold individually.


5KA2008 Keyed Alike # 2008 1”H 2”W

5KAA340 Keyed Alike # A340 1”H 2”W

5KAA549 Keyed Alike # A549 1”H 2”W

General Security Steel Padlock

• Hardened steel shackle for extra cut resistance.• Shackle clearance: 9/16” H x 1/2” W.• 6/box. Sold individually.


7KAP761 Keyed Alike # 761 9/16”H 1-1/8”W

Universal Pin Key Tool

• For keying Universal Pin Padlocks to any Master Lock key.• 1/box. Sold individually.

Product #

376



















DOOR HARDWARE

Padlocks

Universal Pin Padlock

• Universal Pin padlocks for keying convenience, use 376 Universal Pin Key Tool (sold separately).

• Lock pinned to customer’s key in minutes.• Shackle clearance: 15/16” H x 3/4” W.• 6/box. Sold individually.


1UP Universal Keying 15/16” H 1-3/4”W


• Universal Pin padlocks for keying convenience, use 376 Universal Pin Key Tool(sold separately).

• Lock pinned to customer’s key in minutes.• Shackle clearance: 1” H x 15/16” W.• 6/box. Sold individually.


5UP Universal Keying 1” H 2”W


• Universal Pin padlocks for keying convenience, use 376 Universal Pin Key Tool(sold separately).

• Lock pinned to customer’s key in minutes.• Shackle clearance: 1-1/2” H x 5/8” W.• 6/box. Sold individually.


3LFUP Universal Keying 1-1/2”H 1-1/2”W

Schlage Padlocks

• Made of solid brass and features 6-pin solid brass cylinder.• Rekeyable: Features a Schlage C Keyway.• 1/box. Sold individually.


KS23D2300 Schlage C Kwy 1-1/2” 1-25/32” x 2-3/16”

KS43F2300 Schlage C Kwy 2” 1-15/16” x 2-3/16”

Combination Padlocks

• Solid brass case and hardened steel shackle with 3/4” opening.• Choose from 10,000 possible combinations which can be easily changed

and set.• 5/box. Sold individually.

Product # Shackle Body

K436 1” 1-15/16” x 1-3/4”

K437 2-1/4” 1-15/16” x 1-3/4”

1245 Padlock Eyes

• Can be mounted opposed to each other on door and frame, screws are concealed when door is in a closed position.

• Screws included.• 20 pr/box. Sold per pair.

Product # Finish

S298-280 Zinc









DOOR HARDWARE HARDWARE Door Hardware ... Kaba Simplex 5000 Series Mechanical Push-Button Locks ......

Documents

Transcript of DOOR HARDWARE HARDWARE Door Hardware ... Kaba Simplex 5000 Series Mechanical Push-Button Locks ......