DOOR CONFIGURATION #8 · DOOR CONFIGURATION #8 ... Sandcast Arched 11⁄2” x 11” Non-Keyed...

ADDENDUM HFOR 2017-2018 MULTI POINT LOCK TRIM PRICE BOOK

DOOR CONFIGURATION #8

American Cylinder Hub Above Handle51/4” Center to Center

ref. Neuma Doors®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

DOOR CONFIGURATION #8 ref. Neuma Doors®

• Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway• Specify by adding “W” to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

To order: (W) Product Code + Lever Style + Handing + Finish Code

FinishProduct Code Lever Style (LH/RH) List Price

Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside

Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside

1851

185218531854

1861

186218631864

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

See back page of this addendum for Sandcast Bronze lever options.

$216.00

METRIC KNOB




18A1

18A218A318A4

18B1

18B218B318B4

STAINLESS STEEL PLATES, MODERN STYLE

See back page of this addendum for Stainless Steel lever options.

$194.00

Stainless Steel11⁄2” x 11” Non-KeyedAthena Levers

Stainless Steel2” x 10” KeyedDresden Levers

Sandcast Rectangular2” x 10” KeyedTeton Levers

Sandcast Rectangular11⁄2” x 11” Non-KeyedLariat Levers

Stainless Steel (SS)

Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)

2

ref. Neuma Doors® DOOR CONFIGURATION #8

• Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”.• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway• Specify by adding “W” to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

To order: (W) Product Code + Lever Style + Handing + Finish Code




1811

181218131814

1821

182218231824

SANDCAST BRONZE PLATES, ARCHED STYLE

See back page of this addendum for Sandcast Bronze lever options.

$216.00




1831

183218331834

1841

184218431844

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

See back page of this addendum for Lost Wax Bronze lever options.

$216.00

Sandcast Arched11⁄2” x 11” Non-KeyedCimarron Levers

Sandcast Arched2” x 10” KeyedDurango Levers

Bronze Tuscany11⁄2” x 11” Non-KeyedOctagon Levers

Bronze Tuscany2” x 10” KeyedMedici Levers

Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)

Flat Black Bronze (FB)Medium Bronze (MB)

3

DOOR CONFIGURATION #8 Specification Sheet for Components and Door Thickness

Door Configuration #8 American Cylinder Above Handle 5 1/4” Center to Center

Steel Spindle

Rosette Screws

Cylinder Tailpiece

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside

Standard Components:• Single Cylinder Tailpiece• 3 3⁄4” Steel Spindle• 1 1/2” Rosette Screws

Standard Components:• Thumbturn Tailpiece• 3 3⁄4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 1 1/2” Rosette Screws

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in

Standard Door Thickness: 13/4”

Standard Door Thickness: 13/4”

CONSTRUCTION KEYING

Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.

Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.

Construction devices used on one or more of last four positions.

Dimples drilled in plug in this position.

• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.

8 7/8"5 1/4"

1 5/8"

4

Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #8

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Neuma Doors®

5

FixedFixed

2” x 10” Plates, Product Codes 1822, 1842, 1862, 18B21 1⁄2” x 11” Plates, Product Codes 1812, 1832, 1852, 18A2

Non-Keyed, Passage (for Semi-Active Door)

1 1⁄2” x 11” Plates, Product Codes 1813, 1833, 1853, 18A3 2” x 10” Plates, Product Codes 1823, 1843, 1863, 18B3

Non-Keyed, American Style Thumbturn Inside (for Active Door)


Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)


Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

ADDENDUM HFOR 2017-2018 MULTI POINT LOCK TRIM PRICE BOOK

LEVER OPTIONS

FINISH OPTIONS

EMTEK Products, Inc. 15250 E Stafford Street

City of Industry, CA 91744 Tel: 800-356-2741 626-961-0413

Fax: 800-577-5771 626-336-2812 emtek.com

Cologne Lever(CO)

Poseidon Lever(PO)

Stuttgart Lever(STT)

Dresden Lever(DD)

Kiel Lever(KL)

Athena Lever(AT)

Hercules Lever (HS)

Helios Lever(HL)

Hermes Lever(HES)

Stainless Steel

Medici Lever (MDI)

Napoli Lever (NA)

Octagon Lever (OCL)

Padua Lever (PD)

Lost Wax Cast Bronze

Sandcast Bronze

Cody Lever (CD)

Durango Lever (D)

Lariat Lever (LR)

Montrose Lever (MT)

Cimarron Lever (CR)

Yuma Lever (YM)*

Teton Lever (TT)

Aurora Lever (AR)

The door manufacturer listed under this configuration is for reference only and is subject to change. Some retrofitting may be necessary. Please carefully measure and identify your hardware using the diagram listed on page 4. Neuma Doors® is a registered trademark of Nan Ya Plastics Corporation.

Stainless Steel (SS)

Tumbled White Bronze (TWB)

Flat Black Bronze Patina (FB)

Medium BronzePatina (MB)

Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products.

Emtek offers Type 304 stainless steel on all designated Stainless Steel products including levers, knobs, trim plates, and rosettes. Emtek’s Stainless Steel carries a five-year finish warranty. All stainless steel will require some periodic cleaning to keep your hardware looking like new.

* For Single Door Application Only.

DOOR CONFIGURATION #8 · DOOR CONFIGURATION #8 ... Sandcast Arched 11⁄2” x 11” Non-Keyed...

Documents

Transcript of DOOR CONFIGURATION #8 · DOOR CONFIGURATION #8 ... Sandcast Arched 11⁄2” x 11” Non-Keyed...