Domestic Power Supply Cords - Electri-Cordelectri-cord.com/pdf/catdom.pdf · Domestic Power Supply...

Electri-Cord Manufacturing Co.Westfield, PA ~ Since 1946 ~

Domestic Power Supply CordsOur Online Product Catalogs

Most of the cords shown in this brochure are standard, stock items atour factory in Westfield, Pennsylvania, U.S.A. This is by no means ourentire line. Optional features include different lengths, heavier wiretypes, rubber wire, different colors, terminals, strain reliefs, etc.

Electri-cord can also supply cords for use in Israel, South Africa, HongKong, India, Great Britain and many other countries.

Please contact our sales office for prices and for help in designing theexact cord to meet your requirements....Thank you.

Table of Contents:Our Mission Statement and ISO 9002 Certificate Quality is Consistency Special Operations Power Supply Cords Two and Three Conductor Molded Male Plugs Hospital Grade and Heavy Duty Plugs Special Connectors Business Machine Connectors-International Strain Reliefs Wire Size Specifications Cross Reference Table How to Order or Inquire O.E.M. Product Specification Worksheet (PDF 391KB) Glossary of Terminology-Wire Type Metric Conversion Chart

UL and CSA:Throughout this catalog, you will see constant reference made to UL and CSA. All of the power supply cords

pictured, and all of our molds, where specified, are UL listed and CSA certified. All of our products will fallunder one of the following file numbers:

UNDERWRITERSLABORATORIES

E18951E45239E48367

CANADIANSTANDARDS

ASSOCIATION

LR14017LL24378

All of our products are labeled to meet the requirements of UL and CSA. Labeling requirements, of course,vary with the final product classification and end use: power supply cord, detachable power supply cord,wiring harness, cord set, processed wire, etc. Where bulk labeling is used, cartons should not be broken downor destroyed until at the end user's location, to avoid loss of UL and CSA identification.

UL and CSA require identification of all components. We achieve this by placing our name and address(Electri-Cord, Westfield, PA) on the face of each plug or connector as it is molded.

Our State of the Art Assembly Line

Cutting and Terminating In-Line Molding Fail-Safe Testing

ELECTRI-CORD Manufacturing Company312 East Main StreetWestfield, PA. 16950

Telephone: 814-367-2265 ~ Fax: 814-367-2314Since 1946


Our Mission:

Excellence is Consistent Service.

At Electri-Cord, we recognize that your business depends on quality suppliers who consistently producereliable products on time. We have structured our company accordingly because we always put you, ourcustomer, first.

We believe that every aspect of our business is incorporated in meeting one goal - quality service to ourcustomers. With that direction we are committed to building the pride necessary to help our employees toconstantly improve our processes, reduce variability, and ensure that only top quality products leave ourfactory. Every day, every order, every time.

For us, service means innovative and problem-solving designs, custom manufacturing, courteous and accurateorder entry, and prompt delivery.

We have been in the cord business since 1946. Power supply cords and cord sets are our only business.Experience and product focus have earned us our reputation for excellence. But we aren't prepared to rest onour reputation. We continue to strive to meet your requirements.

Our ISO Certificate

This Page Copyright © 2003 Electri-Cord Manufacturing Co.312 E. Main St. Westfield, PA 16950

Phone: 814-367-2265 Fax: 814-367-2314http://www.Electri-Cord.com

E-mail to: Jon QuinnAll Rights Reserved

Page Design Copyright © 2003 Stone Cabin Technologies

ELECTRI-CORD Mfg. Co. OEM Power Cords and Cord Sets


Quality is Consistency:

Excellence is Consistent Service.

At Electri-Cord, quality is much more than the absence of defects; itis the way we manage our business.

We consider that consistency in all of our processes that go in toproducing an electric cord is the route to quality and thatconsistancy is only achievable through the use of techniques such asstatistical process control [SPC], to continuously improve our processand our product. In this way, we prevent defects from hapening inthe first place.

In today's competitive environment, we consider it is no longer goodenough just to meet specifications - we aim to center all of ourprocesses well within specifications.

We recognize that true quality can therefore only be achieved by thecontinuous improvement of all stages of our process... not justmanufacturing but also purchasing, administration, etc. and indeedall aspects of service to the customer.

Quality is a way of managing, simply because our approach dependson teamwork between our management team and our workforce. AtElectri-Cord, we believe in our workforce - they are the people thatknow our processes and how to improve them, and we holdstructured, regular meetings to harness their knowledge. These workteams then use a "Seven Step" approach to process improvement, asshown below. We train our workforce to treat their colleagues at thenext stage in the manufacturing cycle as customers, and to work withthem to improve quality techniques such as SPC.

Perhaps most important to our quality approach is our dependenceon you, the customer. We believe you can help us improve ourproduct even further by constant review against your needs; just aswe are with our own suppliers. We extend an open invitation to all ofour customers to visit us here in Westfield, PA and see how weachieve quality.

achieve quality.

The seven steps to process improvement

Step 1: Identify Key Problems and Improvement OpportunitiesStep 2: Specify Customers and Their RequirementsStep 3: Identify and Quantify Cause and Effect RelationshipsStep 4: Verify Cause and Effect RelationshipsStep 5: Optimize the Process and Confirm the ResultsStep 6: Define Operating Requirements of the Acceptable ProcessStep 6: Institute Control Procedures



E-mail to: [email protected] Rights Reserved



Special Operations:

Custom Capabilities If you are looking for a cord but not sure of all specifications and dimensions you need, or you need to modify acord shown in this catalog, give our problem-solvers a call. They will be more than glad to help you specify acord for just your requirements. Mechanically Assembled Plugs Electri-Cord has the capabilities to assemble many varieties of mechanically-applied plugs. These include hospitalgrade, high amperage, and twist-lock plugs in most NEMA configurations. We can assemble the brand name youspecify, or we will suggest a competitive, more readily available alternate. In-Line Switches Electri-Cord is fully equipped to assemble in-line thumb-wheel switches onto 18/2 SPT-1 and SPT-2 wire. Onceassembled, the cord and switch are each fully tested for continuity, polarity, and switch operation. Switches areavailable in black, brown, and ivory with your choice of location on the cord. Terminals We stock over 100 terminals of all types and configurations: rings, disconnects, spades, bare, tinned, insulated,and fully insulated. We are able to supply you with the exact terminal you require, or with an equivalent we mayhave in stock. All terminal crimping is carefully monitored for proper security and crimp heights. Bulk Wire on Reels Although Electri-Cord does not specialize in selling bulk wire, we do make available our inventory of 20 millionfeet to our customers. If the wire you need is on hand, and we have enough inventory to spare, we will be able toship in 24-72 hours. We prefer to ship stock wire on full reels, but will re-spool down to a minimum 1000 feetper spool, at a nominal cost. Custom Colors Although most of our 20 million foot inventory of wire consists of black, grey and white, we have successfullymatched colors for many customers in the past. Custom colors such as blue, red, beige, and orange are alwayspossible. There may be minimums on special colors and lead times may be affected. Please call our salesdepartment with your special requirements. Packaging and Labeling When filling out our Product Specification Sheet (available online or in our print catalog), please tell us your fullrequirements. We have the capability for all of the following and more.

Packaging Capabilities Bulk Packaging Self-secured Hank Fold and Tie Hank Coil and Tie Individual Bagging

Labeling Capabilities P/N on Each Cord Bar Code on Each Cord Customer Name Caution Labels Custom Printing on Bag






Power Supply Cords:

Most of the cords shown in this brochure are standard, stock items at our factory in Westfield, Pennsylvania,U.S.A. This is by no means our entire line. Optional features include different lengths, heavier wire types,rubber wire, different colors, terminals, strain reliefs, etc.

Electri-cord can supply cords for use in Israel, South Africa, Hong Kong, India, Great Britain and manyother countries.

Please contact our sales office for prices and for help in designing the exact cord to meet yourrequirements....Thank you.

P/N and Color Length AWG Wire Type Nominal O.D. Rating Stranding

ECM-106-BLACK 6' 18 SPT-1 .105 x .203 10A/125V 41/34

ECM-106-WHITE 6' 18 SPT-1 .105 x .203 10A/125V 41/34

ECM-109-BLACK 9' 18 SPT-1 .105 x .203 10A/125V 41/34

ECM-109-WHITE 9' 18 SPT-1 .105 x .203 10A/125V 41/34

Molded Plug - MC-51NEMA 1-15P (Polarized)

Free End Split 1"Strip and Twisted 5/8"

BulkPacked

P/N and Color Length AWG Wire Type Nominal O.D. Rating Stranding

ECM-136-BLACK 6' 18 SPT-1 .110 x .303 10A/125V 41/34

ECM-137-BLACK 6' 18 SPT-2 .140 x .335 10A/125V 41/34

Molded Plug - MC-6-3NEMA 5-15P

Free End Split 1 1/2"Strip and Twisted 5/8"

BulkPacked

P/N and Color Length AWG Wire Type Color Code Nominal O.D. Rating Stranding

ECM-201-BLACK 6' 18 SVT N.A. .240 10A/125V 41/34

ECM-202-BLACK 6' 18 SJT N.A. .298 10A/125V 16/30

Molded Plug - MC-2 or MC-6NEMA 1-15P (Non-Polarized)

Free End ROJ 1 1/2"Strip and Twisted 5/8"

BulkPacked


ECM-237-GREY 6' 18 SVT N.A. .255 10A/125V 41/34

ECM-239-GREY 8' 18 SVT N.A. .255 10A/125V 41/34

ECM-405-GREY 6' 18 SJT N.A. .320 10A/125V 16/30

ECM-407-GREY 8' 18 SJT N.A. .320 10A/125V 16/30


Free End ROJ 1 1/2"Strip and Twisted 5/8"

BulkPacked

Detachable Power Supply Cords:


ECM-380-GREY 6' 18 SVT N.A. .255 10A/125V 41/34

ECM-250-BLACK 7'6" 18 SVT N.A. .255 10A/125V 41/34

ECM-251-BLACK 7'6" 18 SVT ICC .255 10A/125V 41/34

ECM-500-BLACK 6'7" 18 SJT ICC .320 10A/125V 16/30





Molded Female-BMEIEC 320 C13

BulkPacked





Molded Female-BME-90R-175SCIEC 320 C13

BulkPacked








BulkPacked






Molded Plug - HMBIEC 320 C14


BulkPacked



This Page Copyright © 2003Electri-Cord Manufacturing Co.312 E. Main St. Westfield, PA 16950





3-Conductor Molded Male Plugs:

MC-6-3

5-15P

Rating: 15A-125V

Exceptions: 22 AWG and 12 AWG UL only

Used On:22/3 AWM18/3 SPT-1; SPT-2; SPT-3; HPN; SVT; SV; SJT; SJ; SJO; S; SO; ST16/3 SPT-2; SPT-3; HPN; SJT; SJ; SJO; S; SO14/3 SPT-3; SJT; SJ; SJO12/3 SJT; SJ; SJO

Removable insert can be tooled withCustomer's logo. Check with sales department.

MCA-3P

5-15P

MCA-520

5-20P

Rating: 15A-125V

Rating: 20A-125V

Used On:18/3 SPT-1; SPT-2; SPT-3; HPN; SVT; SV; SJT; SJ; SJO16/3 SPT-2; SPT-3; HPN; SJT; SJ; SJO14/3 SPT-3; SJT

MCA-3T

6-15P

MCA-620

6-20P

Rating: 15A-250V

Rating: 20A-250V

Used On:18/3 SPT-1; SPT-2; SPT-3; HPN; SVT; SV; SJT; SJ; SJO16/3 SPT-2; SPT-3; HPN; SJT; SJ; SJO14/3 SPT-3; SJT

2-Conductor Molded Male Plugs:

MC-2

1-15P

Rating: 13A-125V

Used On:18/2 SPT-2; HPN; SVT; SJT; SV; SJ; SJO16/2 SPT-2; HPN; SJT; SJ; SJOSuffix-P = Polarized

MC-6

1-15P

Rating: 13A-125V

Used On:18/2 SPT-2; HPN; SVT; SJT; SV; SJ; SJO16/2 SPT-2; HPN; SJT; SJ; SJOSuffix-P = Polarized


MC-51

1-15P

Rating: 13A-125V

Used On:20/2 XT; POXT

18/2 SPT-1; SPT-2; HPN16/2 SPT-2; HPNSuffix-P = Polarized

MC-TU/L Toy Plug

1-15P

Rating: 13A-125V

Exceptions: 22 AWG and 12 AWG UL only

Used On:18/2 SPT-1; SPT-2; SVT; SVSuffix-P = Polarized


Molded Plugs With Cord Grips:

MC-6-3 C/G

5-15P

Rating: 15A-125V

Used On:18/3 SVT; SJT; SV; SJ; SJO16/3 SJT; SJ; SJO14/3 SJT; SJ; SJO

MC-6 C/G-A

1-15P

Rating: 15A-125V

Used On:18/2 SPT-2; SVT; SJT; SV; SJ; SJO


MC-6 C/G-B

1-15P

Rating: 15A-125V

Used On:18/2 SPT-2; HPN; SVT; SJT; SV; SJ; SJO



Hospital Grade and Heavy Duty Plugs:

MC-9S-XXX

Available in the followingconfigurations:

NEMA 5-15P = MC-9S-515NEMA 6-15P = MC-9S-615NEMA 5-20P = MC-9S-520NEMA 6-20P = MC-9S-620

5-15P 6-15P 5-20P 6-20P

Ratings:See Below

15A-125V15A-250V20A-250V20A-250V

Used On:18/3 SJT; SJ; SJO16/3 SJT; SJ; SJO14/3 SJT; SJ; SJO; SO12/3 SJT; SJ; SJO

Suffix-H = Hospital Grade with Green Dot.

MC-9A-XXX-X

Available in the followingconfigurations:

NEMA 5-15P = MC-9A-515NEMA 6-15P = MC-9A-615NEMA 5-20P = MC-9A-520NEMA 6-20P = MC-9A-620

5-15P 6-15P 5-20P 6-20P

Ratings:See Below

15A-125V15A-250V20A-125V20A-250V

Used On:18/3 SJT; SJ; SJO16/3 SJT; SJ; SJO14/3 SJT; SJ; SJO; SO12/3 SJT; SJ; SJO


Ground pin can be oriented in four different positions.Position shown is 12 o'clock (-12). Other positions are 3o'clock (-3), 6 o'clock (-6) and 9 o'clock (-9).

MC-10

Available only as a NEMA 5-15Pconfiguration.

5-15P

Rating: 15A-125V

Used On:18/3 SJT; SJ; SJO; SVT; SV16/3 SJT; SJ; SJO14/3 SJT; SJ; SJO12/3 SJT; SJ; SJO



Special Connectors:

WBH-2F Rating:10A-125V

Used On:18 AWG only

WBH-2M Rating:10A-125V

Used On:18 AWG only

WBH-3F Rating:10A-125V

Used On:18 AWG only

WBH-3M Rating:10A-125V

Used On:18 AWG only

250-TV DISCONTINUED

Used On:18/2 SPT-1; SPT-216/2 SPT-2

Suffix-P = Polarized

260-TV Rating:7A-125V

Used On:18/2 SPT-1; SPT-216/2 SPT-2; HPN



Used On:18/2 SPT-1; SPT-216/2 SPT-2; HPN



Used On:20/2 XT; POXT18/2 SPT-1; SPT-2

Suffix-P = PolarizedApprovals only for 18AWG

Note: This plug mates with our MC-C.



Suffix-P = PolarizedApprovals only for 18AWG

Removable insert can be tooled with Customer'slogo. Check with sales department.

MC-C Rating:7A-125V

Used On:20/2 XT; POXT18/2 SPT-1; SPT-2*20 AWG UL only


Note: This plug mates with our 300-TV.

BMC-1 Rating:7A-125V

Used On:18/3 SPT-2; SVT


Used On:18/3 SPT-1; SPT-2; SVT; SJT


Used On:18/2 SPT-1; SPT-2; SVT; SJT


Used On:18/3 SVT; SJT

MFC-7 Rating:7A-125V

Used On:18/2 SPT-1; SPT-2

HMB

Rating:15A-125V/250V

Used On:18/3 SVT; SJT16/3 SJT14/3 SJT

*Also approved on 18AWG and 16AWG Shielded Wire.

Note: This plug mates with all of the InternationalBusiness Machine Plugs on our Business MachineConnectors Page.

MCF-3

5-15R

DISCONTINUED

Used On:18/3 SPT-1; SPT-2; HPN; SVT; SJT16/3 SPT-2; HPN; SJT14/3 SPT-3; SJT

Removable insert can be tooled with customer'slogo. Check with sales department.

MFX-3

5-15R

Rating:15A-125V

Exceptions: CSA approval only on SJT.

Used On:18/3 SPT-1; SPT-2; SPT-3; HPN; SVT; SJT; SJ; SJO16/3 SPT-2; SPT-3; HPN; SJT; SJ; SJO 14/3 SPT-3; SJT; SJO12/3 SJT; (Non-U/L)


MCF-2

1-15R

DISCONTINUED

Used On:18/2 SPT-1; SPT-2; HPN; SVT; SJT16/2 SPT-2; HPN; SJT


MFX-2

1-15R

Rating:15A-125V

Used On:18/2 SPT-1; SPT-2; HPN; SVT; SJT16/2 SPT-2; HPN; SJT14/2 SJT


BMI-2-3 Rating:7A-125V

Used On:18/2 SVT; SJT18/3 SVT; SJT



Business Machine Connectors-International:

BME*


Exceptions: CSA approval only onjacketed wire.

Used On:18/2 SPT-2; SVT; SJT18/3 SPT-2; SVT; SJT16/2 SJT16/3 SPT-2; SJT14/3 SJT

BME-90L*


Used On:18/2 SVT; SJT18/3 SVT; SJT16/2 SJT16/3 SJT14/3 SJT

BME-90LSC*



BME-90L150*



BME-90L150SC*



BME-90L175SC*



BME* -2S -3S


Exceptions: CSA approval only onjacketed wire.

-2S Used On:18/2 SPT-2; SVT; SJT16/2 SJT

-3S Used On:18/3 SPT-2; SVT; SJT16/3 SJT14/3 SJT

BME-90R*



BME-90RSC*



BME-90R150*



BME-90R150SC*



BME-90R175SC*



Note: All of the above can be also used on shielded 18/3 SVT, 18/3 SJT, 16/3 SJT and 14/3 SJT -Aluminum/Mylar Shield with Drain Wire.

* Note: For mating male plug - HMB- see our Special Connectors Page.


Strain Reliefs:

BSR-F X Y Z TYPE

.135 .470 .340 B

.125 .500 .420 B

.125 .500 .430 B

.100 .475 .440 B

.125 .540 .475 B

.081 .470 .340 B

.125 .335 .345 C

Note: Section A-A can be tooled to other dimensions.

Used On:18/2 SPT-1; SPT-2; SVT; SJT18/3 SPT-1; SPT-2; SVT; SJT

BSR "X" DIM. "Y"

DASH NO. DIM.

-.064 .470

-.078 .470

-.125 .470

-.090 .500

Note: Section A-A can be tooled to other dimensions.

Used On:18/2 SPT-2; SVT; SJT18/3 SPT-1; SPT-2; SVT; SJT

S-BSR Note: Strain relief will accept inserts of Cat. Nos.BSR and BSR-F with a Y-Dimension of .500 or less.

Used On:18/2 SPT-2; SVT; SJT18/3 SPT-1; SPT-2; SVT; SJT

SR-L

Used On:18/2 SPT-1

SFR-R Note: Section A-A can be tooled to otherdimensions.


SR-A


SFR-B

Used On:18/2 SPT-2

SR-MR


SR-125

Used On:18/2 SPT-1; SPT-218/3 SPT-1; SVT

SR-050


SR-093

Used On:18/2 SPT-1; SPT-2; SVT18/3 SPT-1; SVT

SR-046

Used On:18/2 SVT; SJT18/3 SVT; SJT

SR-E


SR-P


RY-1 Rating:10A-125V

Used On:18/3 SVT




Wire Size Specifications:

Wire Type Dimensions Stranding Ampacity Weight Lbs./1,000 Ft.

20/2 POXT .096 x .185 26/34 3 18

18/2 SPT-1 .105 x .203 41/34 10 20

18/2 SPT-2 .140 x .262 41/34 10 29

16/2 SPT-2 .155 x .285 65/34 13 37

18/2 HPN .144 x .286 41/34 10 30

16/2 HPN .155 x .305 65/34 15 38

18/3 SPT-1 .110 x .303 41/34 10 31

18/3 SPT-2 .140 x .335 41/34 10 37

18/3 SPT-3 .170 x .380 41/34 10 48

16/3 SPT-2 .155 x .380 65/34 13 49

16/3 SPT-3 .185 x .435 65/34 13 62

14/3 SPT-3 .235 x .500 41/30 15 97

18/3 HPN .136 x .335 41/34 10 42

16/3 HPN .150 x .365 65/34 15 55

18/2 SVT .240 41/34 10 34

18/2 SVT .230 65/36 10 34

18/3 SVT .255 41/34 10 42

18/3 SVT .245 65/36 10 42

18/3 SVTO .260 41/34 10 42

18/2 SJT .298 16/30 10 44

16/2 SJT .330 26/30 13 57

18/3 SJT .320 16/30 10 59

16/3 SJT .345 26/30 13 72

14/3 SJT .375 41/30 15 94

12/3 SJT .445 65/30 20 136

18/3 SV .255 41/34 10 33

18/3 SJ .320 16/30 10 60

16/3 SJ .345 26/30 13 74

14/3 SJ .375 41/30 15 97

12/3 SJ .449 65/30 20 140

18/3 SJO .320 16/30 10 60

16/3 SJO .345 26/30 13 74

14/3 SJO .375 41/30 15 87

18/3 SO .382 16/30 10 92

16/3 SO .400 26/30 13 112

14/3 SO .549 41/30 15 192

Optional Stranding

18 AWG 16/30, 41/34, 65/36

16 AWG 26/30, 65/34

14 AWG 41/30

12 AWG 65/30

Note:

Above dimensions are nominal and are within UL and CSA tolerances. If wire size or O.D. is critical toyour application, please check with our sales department for special arrangements.






Cordset Cross-Reference:

BeldenTrade #

Electri-CordPart #

BeldenTrade #

Electri-CordPart #

BeldenTrade #

Electri-CordPart #

17009 ECM-009 17506 ECM-506 17607 ECM-607

17106 ECM-106 17507 ECM-507 17612 ECM-612

17109 ECM-109 17508 ECM-508 17613 ECM-613

17205 ECM-205 17509 ECM-509 17618 ECM-618

17236 ECM-236 17512 ECM-512 17619 ECM-619

17237 ECM-237 17513 ECM-513 17624 ECM-624

17238 ECM-238 17514 ECM-514 17629 ECM-629

17239 ECM-239 17516 ECM-516 17635 ECM-635

17250 ECM-250 17517 ECM-517 17636 ECM-636

17251 ECM-251 17518 ECM-518 17637 ECM-637

17254 ECM-254 17519 ECM-519 17740 ECM-740

17255 ECM-255 17520 ECM-520 17741 ECM-741

17276 ECM-276 17521 ECM-521 17742 ECM-742

17280 ECM-280 17523 ECM-523 17743 ECM-743

17405 ECM-405 17524 ECM-524 17745 ECM-745

17406 ECM-406 17525 ECM-525 17746 ECM-746

17407 ECM-407 17534 ECM-534 17747 ECM-747

17408 ECM-408 17535 ECM-535 17749 ECM-749

17409 ECM-409 17536 ECM-536 17750 ECM-750

17412 ECM-412 17537 ECM-537 17751 ECM-751

17419 ECM-419 17538 ECM-538 17752 ECM-752

17422 ECM-422 17539 ECM-539 17753 ECM-753

17425 ECM-425 17566 ECM-566 17757 ECM-757

17500 ECM-500 17567 ECM-567 17902 ECM-902

17501 ECM-501 17568 ECM-568 17903 ECM-903

17502 ECM-502 17569 ECM-569 17904 ECM-904

17503 ECM-503 17600 ECM-600 17905 ECM-905

17504 ECM-504 175601 ECM-601 17906 ECM-906

17505 ECM-505 17606 ECM-606 17952 ECM-952

We are able to cross-reference several of our other competitor's part numbers as well. If the onlydescription you have is someone else's part number, the Electri-Cord problem solvers will be able to quoteyou immediately with our best price and delivery.






How to Order or Inquire:To speed up processing, please include as much as possible of theinformation listed below when placing an order or making an inquiry:

Overall Length: Face of plug to end of longest conductor. AWG size & number of conductors. Color & UL type designation. Plug type. Appliance end finish:

Molded connector - specify by Cat. No. Power supply cords - describe end processing from chart below.

Strain Relief: Specify by Cat. No. Indicate location as center-line to end of longest conductor.

Put-up: Hanked-self secured - Specify body and free-end lengths. Unhanked-tied in bundles. Coiled - Specify critical diameter and free-end lengths.

Required approvals: UL and/or CSA

Standard Factory Tolerances

Overall length up to 10 ft. Plus or Minus 1 in.

over 10 ft. Plus 2 in. Minus 1 in.

Split or Jacket Removal. Plus or Minus 1/4 in.

Strip. Plus or Minus 1/16 in.

Location of Molded Strain Relief. Plus 1/4 in. Minus 1/8 in.

Stagger. Plus or Minus 1/8 in.

Hank Cap End. Plus or Minus 1 in.

Body. Plus or Minus 1 in.

Free End. Plus or Minus 2 in.

Please download and print our O.E.M. ProductSpecification Sheet in PDF Format (391K) or as aJPEG Image (538K). Save from your browser or

JPEG Image (538K). Save from your browser ordownload, then print from your graphicsapplication. These files are necessarily large, butwatch for our Online ordering form to be releasedsoon.




Glossary of Terminology-Wire Type:

Flat Wire: SPT: Stranded, Parallel, Thermoplastic This is always followed by a -1, -2 or -3, signifying insulation thickness for different applications.

HPN: Heater, Parallel, Neoprene Required for heater-type application, such as irons, toasters, etc.

NOTE: We can run some 20 AWG, but mostly we run 18, 16 and 14 AWG, 2 or 3 conductors. P is always Parallel Wire (Flat).

Jacketed Wire: S = Stranded (or Service Wire) J = Junior Service (300 Volt). If no "J" is in the wire type, then it is a hard service (600 Volt). T = Thermoplastic. If no "T" is in the wire type, then it has a rubber jacket. O = Oil-Resistant Compound W = Weather-Resistant Compound V = Vacuum - as in vacuum cleaner. This is a small O.D. jacketed wire, very flexible and initially used for vacuumcleaners but now used on many different types of products. Available only in 18 AWG.

Examples: SV = Stranded Vacuum Rubber Jacketed (NO "T") SJT = Stranded Junior Thermoplastic SJTOW = Stranded Junior Thermoplastic, Oil and Weather resistant for UL and CSA.

Miscellaneous requirements: S.P. = Surface Printed N.M. = Non-Migratory compound to prevent the wire color from bleeding under unusual circumstances. VW-1 = Vertical Flame test (formerly FR-1) 60°C = Standard temperature rating (except HPN - 90°C 105°C = Electri-Cord's alternate rating (we normally don't stock 75°, 90°C) IEC, ICC = International Color Code on the inner conductors (Blue, Brown, Green w/Yellow Stripe) N.A. = North American Color Code on the inner conductors (Black, White, Green) 41/34 = Stranding - 41 strands of 34 AWG wire for each inner conductor T.C. = Tinned Copper inner conductors

RIBBED = Outer jacket is striated with ribs R/S or W/S = Red or White Stripe for visual polarity inspection on Flat wire

Inner Conductor Colors

Function North American (NA) International (ICC)

Hot Black Brown

Neutral White Blue

Earth (Ground) Green Green w/Yellow Stripe

Metric Conversion Chart:

Metric to Standard Notes Standard to Metric

25.4 mm per inch305 mm per foot.305 M per foot1.61 KM per mile

.03937 inches per mm39.37 inches per meter3.28 feet per meter.622 miles per KM

In. Dec. mm In. Dec. mm In. Dec. mm

1/32 .031 .793 11/32 .343 8.731 11/16 .687 17.462

1/16 .062 1.587 3/8 .375 9.525 23/32 .718 18.256

3/32 .093 2.381 13/32 .406 10.318 3/4 .750 19.050

1/8 .125 3.175 7/16 .437 11.112 25/32 .781 19.843

5/32 .156 3.968 15/32 .468 11.906 13/16 .812 20.637

3/16 .187 4.762 1/2 .500 12.700 27/32 .843 21.431

7/32 .218 5.556 17/32 .531 13.493 7/8 .875 22.225

1/4 .250 6.350 9/16 .562 14.287 29/32 .906 23.018

9/32 .281 7.143 19/32 .593 15.081 15/16 .937 23.812

5/16 .312 7.937 5/8 .625 15.875 31/32 .968 24.606

21/32 .656 16.668 1 1.000 25.400

Domestic Power Supply Cords - Electri-Cordelectri-cord.com/pdf/catdom.pdf · Domestic Power Supply...

Documents

Transcript of Domestic Power Supply Cords - Electri-Cordelectri-cord.com/pdf/catdom.pdf · Domestic Power Supply...