Does your vinyl cutter display these symptoms?...MK-GS24 MK-GR420 MK-GR540 MK-GR640 Self-Maintenance...
2
Does your vinyl cutter display these symptoms? Material is stripped off the cutting edge Cutting accuracy is poor Cut line is wavy Cut line appears stitched Doesn’t cut accurately Start and end points do not match Vinyl Cutter Self-Maintenance Kit Cut like new with the
Transcript of Does your vinyl cutter display these symptoms?...MK-GS24 MK-GR420 MK-GR540 MK-GR640 Self-Maintenance...
Does your vinyl cutter display
these symptoms?
Material is stripped o� the cutting edge
Cutting accuracy is poor
Cut line is wavy
Cut line appears stitched
Doesn’t cut accurately
Start and end points do not match
Vinyl Cutter Self-Maintenance KitCut like new with the
Degradation of pinch rollers Degradation of the cutter protection strip Bearing degradation Cutter blade wear
When the surface of the pinch roller deteriorates and it becomes impossible to feed a vinyl sheet evenly, the start and end points will not match.
If the surface of the cutter protection strip is scraped and the cutter blade enters the groove, blade jumping and a wavy cut will occur.
If the bearings inside the cutter blade holder are depleted, your graphics cannot be cut correctly.
If the cutter blade is worn out, edge stripping and blade jumping will occur.
Start and endpoints do not
match
Cuttingaccuracyis poor
Start and endpoints do not
match
Cut lineappearsstitched
Cut lineis wavy
Doesn’t cutaccurately
Material is stripped o�the cutting
edge
Cut lineappearsstitched
Cut lineis wavy
Material is stripped o�the cutting
edge
Cut lineappearsstitched
Cut lineis wavy
Watch theself-maintenance
videowww.rolanddg.com.au/cutlikenew
* CAMM-1 PRO GX-640 Self-Maintenance Kit
Maintain your cutter properly with the self-maintenance kit which contains all the necessary replacement parts.
CAMM-1/CAMM-1 PRO Self-Maintenance Kit
•Standard Cutting Blade •Cutter Pad •Blade Holder •Pinch Roller (M) •Pinch Roller (LR) •Sheet Cutter Blade Set •E-ring Holder (GR series does not include)
Included items
Bring back the premium
performance of your cutter.
www.rolanddg.com.au
Cutter Model Number
MAINTENANCE KIT GX-24
MAINTENANCE KIT GX-300
MAINTENANCE KIT GX-400
MAINTENANCE KIT GX-500
MAINTENANCE KIT GX-640
MAINTENANCE KIT GS-24
MAINTENANCE KIT GR-420
MAINTENANCE KIT GR-540
MAINTENANCE KIT GR-640
MK-GX24
MK-GX300
MK-GX400
MK-GX500
MK-GX640
MK-GS24
MK-GR420
MK-GR540
MK-GR640
Self-Maintenance Kit Description Part Number
GX-24
GX-300
GX-400
GX-500
GX-640
GS-24
GR-420
GR-540
GR-640
Maintenance is required to solve these issues.
