DNA extraction

From Wikipedia, the free encyclopedia

For the various methods, see Nucleic acid methods.

DNA isolation is a process of purification of DNA from sample using a combination of physical

and chemical methods. The first isolation of DNA was done in 1869 by Friedrich Miescher.[1]

Currently it is a routine procedure in molecular biology or forensic analyses.

Contents

1 Basic procedure of DNA extraction

2 Special Types of DNA Extractions

3 Detecting DNA

4 See also

5 References

6 External links

7 Further reading

Basic procedure of DNA extraction

There are three basic and two optional steps in a DNA extraction:

Breaking the cells open, commonly referred to as cell disruption or cell lysis, to expose

the DNA within. This is commonly achieved by chemical and physical methods-

blending, grinding or sonicating the sample.

Removing membrane lipids by adding a detergent or surfactants which also serves in cell

lysis.

Removing proteins by adding a protease (optional but often done).

Removing RNA by adding an RNase (almost always done).

DNA purification from detergents, proteins, salts and reagents used during cell lysis step.

The most commonly used procedures are:

o Ethanol precipitation usually by ice-cold ethanol or isopropanol. Since DNA is

insoluble in these alcohols, it will aggregate together, giving a pellet upon

centrifugation. Precipitation of DNA is improved by increasing of ionic strength,

usually by adding sodium acetate.

o Phenol–chloroform extraction in which phenol denatures proteins in the sample.

After centrifugation of the sample, denaturated proteins stay in organic phase

while aqueous phase containing nucleic acid is mixed with the chloroform that

removes phenol residues from solution. (Note: for DNA isolation in used phenol

buffered to pH 8, RNA must be isolated using acidic phenol.)

o Minicolumn purification that relies on the fact that the nucleic acid may bind

(adsorption) to the solid phase (silica or other) depending on the pH and the salt

content of the buffer.

Refinements of the technique include adding a chelating agent to sequester divalent cations such

as, Mg2+

and Ca2+

, which prevents enzymes like DNase from degrading the DNA.

Cellular and histone proteins bound to the DNA can be removed either by adding a protease or

by having precipitated the proteins with sodium or ammonium acetate, or extracted them with a

phenol-chloroform mixture prior to the DNA-precipitation.

After isolation, the DNA is dissolved in slightly alkaline buffer, usually in the TE buffer, or in

ultra-pure water.

Special Types of DNA Extractions

Specific techniques must be chosen for isolation of DNA from some samples. Typical samples

with complicated DNA isolation are:

archaeological samples containing partially degraded DNA, see ancient DNA

samples containing inhibitors of subsequent analysis procedures, most notably inhibitors

of PCR, such as humic acid from soil, indigo and other fabric dyes or haemoglobin in

blood

samples from microorganisms with thick cellular wall, for example yeast

On the other hand, extrachromosomal DNA is generally easy to isolate, especially plasmids may

be easily isolated by cell lysis followed by precipitation of proteins, which traps chromosomal

DNA in insoluble fraction and after centrifugation, plasmid DNA can be purified from soluble

fraction.

A Hirt DNA Extraction is an isolation of all extrachromosomal DNA in a mammalian cell. The

Hirt extraction process gets rid of the high molecular weight nuclear DNA, leaving only low

molecular weight mitochondrial DNA and any viral episomes present in the cell.

Detecting DNA

Main article: Quantification of nucleic acids

A diphenylamine (DPA) indicator will confirm the presence of DNA. This procedure involves

chemical hydrolysis of DNA: when heated (e.g. ≥95 °C) in acid, the reaction requires a

deoxyribose sugar and therefore is specific for DNA. Under these conditions, the 2-deoxyribose

is converted to w-hydroxylevulinyl aldehyde, which reacts with the compound, diphenylamine,

to produce a blue-colored compound. DNA concentration can be determined measuring the

intensity of absorbance of the solution at the 600 nm with a spectrophotometer and comparing to

a standard curve of known DNA concentrations.

Measuring the intensity of absorbance of the DNA solution at wavelengths 260 nm and 280 nm

is used as a measure of DNA purity. DNA absorbs UV light at 260 and 280 nanometres, and

aromatic proteins absorb UV light at 280 nm; a pure sample of DNA has a ratio of 1.8 at 260/280

and is relatively free from protein contamination. A DNA preparation that is contaminated with

protein will have a 260/280 ratio lower than 1.8.

DNA can be quantified by cutting the DNA with a restriction enzyme, running it on an agarose

gel, staining with ethidium bromide or a different stain and comparing the intensity of the DNA

with a DNA marker of known concentration.

Using the Southern blot technique, this quantified DNA can be isolated and examined further

using PCR and RFLP analysis. These procedures allow differentiation of the repeated sequences

within the genome. It is these techniques which forensic scientists use for comparison,

identification, and analysis.