'DMGI' Multistation Gauge Isolators DMIC Gauges & Isolatores Catalog Copyright ©2010 Delaware Mfg....

1
www.dmic.com DMIC Gauges & Isolatores Catalog Copyright ©2010 Delaware Mfg. DGI-1004A Call Toll Free 1-800-248-3642 In Canada 1-800-320-3642 Page 10 'DMGI' Multistation Gauge Isolators ¼" SAE/BSPP Thread Built in snubber and drain of residual pressure to tank in "off" positions Special "reverse" model for bolt-in replacement of foreign spool type isolator - please call Factory Available with Buyer's choice of sealing materials Please Call Factory to specify if for Low pressure / Gas applications Standard and Remote DMIC's 'KG' and 'RG' Multistation isolators allow Designers to provision centralized multi-point monitoring of critical subsystems. The 'RG' model allows sharing of an expensive transducer Dimension Views DMGI Dimensions (inches) A Overall Length B Back to Front C Back to Mounting D Body Diameter E Knob Diameter F Flange Diameter G Bolt Pattern H Mounting Bolt DMGI-KG 4.50 2.32 1.72 2.98 3.18 4.88 4.00 ¼-20 UNC DMGI-RG Model Code Description KG Gauge In Knob Iso RG Remote Gauge Iso 12 - KG DMGI Gauge Range For 'KG' model, supply the 2-digit gauge ordering code. Please refer to table on 'C' Series Bourdon Gauges (eg: 13 = 0/3000 PSI, OF = 30 "Hg/30 PSI) ** # Stations Code Description 06 Six Stations 12 Twelve Stations 3 4 S Thread Code Description S SAE B BSPP N NPT Pressure Code Description 4 3000 PSI Aluminum 1 10000 PSI Steel Sealing Code Description 2 EPR / EPDM 3 Viton DMGI-RG DMGI-KG Note: If 12 stations ports ordered, additional 6 ports will be evenly spaced around surface of tank port in DMGI-RG and KG picture

Transcript of 'DMGI' Multistation Gauge Isolators DMIC Gauges & Isolatores Catalog Copyright ©2010 Delaware Mfg....

Page 1: 'DMGI' Multistation Gauge Isolators DMIC Gauges & Isolatores Catalog Copyright ©2010 Delaware Mfg. DGI-1004A Call Toll Free 1-800-248-3642 Page 10 In Canada 1-800-320-3642

www.dmic.comDMIC Gauges & Isolatores CatalogCopyright ©2010 Delaware Mfg.

DGI-1004A Call Toll Free 1-800-248-3642In Canada 1-800-320-3642Page 10

'DMGI' Multistation Gauge Isolators

• ¼" SAE/BSPP Thread • Built in snubber and drain of residual pressure to tank in "off" positions• Special "reverse" model for bolt-in replacement of foreign spool type isolator - please call Factory• Available with Buyer's choice of sealing materials• Please Call Factory to specify if for Low pressure / Gas applications

StandardandRemoteDMIC's 'KG' and 'RG'Multistation isolators allow Designers to provision centralized multi-point monitoring of critical subsystems. The 'RG' model allows sharing of an expensive transducer

Dimension Views

DMGIDimensions(inches)

AOverallLength

BBackto

Front

CBackto

Mounting

DBody

Diameter

EKnob

Diameter

FFlange

Diameter

GBolt

Pattern

HMounting

Bolt

DMGI-KG4.50 2.32 1.72 2.98 3.18 4.88 4.00 ¼-20

UNCDMGI-RG

ModelCode Description

KG GaugeInKnobIso

RG RemoteGaugeIso

12-KGDMGI

GaugeRangeFor'KG'model,supplythe2-digit

gaugeorderingcode.Pleaserefertotableon'C'SeriesBourdonGauges

(eg:13=0/3000PSI,OF=30"Hg/30PSI)

**

#StationsCode Description

06 SixStations

12 TwelveStations

34S

ThreadCode Description

S SAE

B BSPP

N NPT

PressureCode Description

4 3000PSIAluminum

1 10000PSISteel

SealingCode Description

2 EPR/EPDM3 Viton

DMGI-RG DMGI-KGNote: If 12 stations ports ordered, additional 6 ports will

be evenly spaced around surface of tank port in DMGI-RG and KG picture