Dl Enhanced Cell_fach

download Dl Enhanced Cell_fach

of 2

description

Dl Enhanced Cell_fach

Transcript of Dl Enhanced Cell_fach

  • 8/12/2014 BSC6900 UMTS Product Documentation

    http://localhost:7890/hdx.cgi?fe=1&lib=31184925&v=07&tocLib=31184925&tocV=07&id=WRFD%2d01061111&tocURL=resources%252fmbsc%252fm%252dbs 1/2

    Configuring Downlink Enhanced CELL_FACH

    This section describes how to activate, verify, and deactivate the optional feature WRFD-010688 DownlinkEnhanced CELL_FACH.

    Prerequisites

    Dependencies on Hardware

    This feature does not have any special requirements for hardware.

    Dependencies on Other Features

    The configurations of the features on which this feature depends are complete. Thisfeature depends on the feature WRFD-010685 Downlink Enhanced L2.

    License

    The license controlling this feature has been activated.

    Other Prerequisites

    The UE should support this feature.

    HBBI and HDLP on BTS3812E/BTS3812AE do not support this feature, EBBI, EDLPis needed.

    BBU3806 does not support this feature, EBBC or EBBCd is needed. EBBM isneeded by BBU3806C to support this feature.

    3900 series NodeB: WBBPa does not support this feature, and WBBPb or WBBPd isneeded.

    Context

    This feature enables the FACH to be carried on the HS-DSCH. Based on this feature, the UE can receivedata at a higher rate in CELL_FACH state.

    Procedure

    Activation Procedure

    1. Run the BSC6900 MML command MOD UCELLALGOSWITCH to select E_FACHand DL_L2ENHANCED from the drop-down list Cell Hspa Plus function switch.

    2. Run the BSC6900 MML command ADD UCELLHSDPA to add HUDPA parametersof a cell.

    3. Run the BSC6900 MML command ADD UCELLEFACH to add enhancedCELL_FACH state parameters of a cell.

    4. Run the BSC6900 MML command ACT UCELLHSDPA to activate HSDPA feature.

    5. Run the BSC6900 MML command ACT UCELLEFACH to activate this feature.

    Verification Procedure

    1. Run the BSC6900 MML command DSP UCELL to check whether EFACH isavailable. The value of Status of EFACH is EFACH available.

    Deactivation Procedure

  • 8/12/2014 BSC6900 UMTS Product Documentation

    http://localhost:7890/hdx.cgi?fe=1&lib=31184925&v=07&tocLib=31184925&tocV=07&id=WRFD%2d01061111&tocURL=resources%252fmbsc%252fm%252dbs 2/2

    1. Run the BSC6900 MML command MOD UCELLALGOSWITCH to clear E_FACHand DL_L2ENHANCED from the drop-down list Cell Hspa Plus function switch.

    2. Run the BSC6900 MML command DEA UCELLEFACH to deactivate this feature.

    Example

    //Activating Downlink Enhanced CELL_FACH

    MOD UCELLALGOSWITCH: CellId=11, HspaPlusSwitch=E_FACH-1&DL_L2ENHANCED-1;ADD UCELLHSDPA: CellId=11, AllocCodeMode=Automatic, CodeAdjForHsdpaSwitch=ON;ADD UCELLEFACH: CellId=11;ACT UCELLHSDPA: CellId=11;ACT UCELLEFACH: CellId=11;

    //Deactivating Downlink Enhanced CELL_FACHMOD UCELLALGOSWITCH: CellId=11, HspaPlusSwitch=E_FACH-0&DL_L2ENHANCED-0;DEA UCELLEFACH: CellId=11;

    Parent topic: RAN Feature Activation Guide

    Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.