Diyobd2 how to upgrade digiprog 3 4.88 to latest 4.94
Transcript of Diyobd2 how to upgrade digiprog 3 4.88 to latest 4.94
Numéro de l'article. SS115
http://www.diyobd2.fr/wholesale/digiprog-3-v494-update-software.html
Numéro de l'article. SM47
http://www.diyobd2.fr/wholesale/v494-digiprog-iii-digiprog3-odometer-master-pr
ogrammer.html
How to upgrade Digiprog 3 4.88 to latest 4.94
How to upgrade Digiprog 3 with 4.94 update software
The popular mileage programmer Digiprog 3 has been updated to the latest 4.94
version recently. Its V4.94 update software is also released in the same day on
DIYOBD2.FR. Our technicians have made a quick tutorial on how to using the
Digiprog 3 4.94 update software and how to upgrade the tool from 4.88 version to
4.94.
Step 1 – Open the V4.94 update software and find two zipped files inside. Copy and
paste the files from to desktop and unzip both of them.
Step 2 – Open “Digiprog3 4.94 Update Video” on the desktop and unzip “COM
2.08.30 x86WHQL Certified” file.
Step 3 – Next we will install Digiprog 3 driver. Connect Digiprog 3 hardware to the
computer and get a “Found New Hardware Wizard” window.
Step 4 - Select “Install from a list or specific location (Advanced)”.
Step 5 – Select “Include this location in the search”, click on “Browse” on the right,
select “COM 2.08.30 x86WHQL Certified” and then click on “Ok”.
Step 6 – There will be a second “Found New Hardware Wizard” window. Click “OK”
– “Next” – “Finish”.
Step 7 – Make sure the driver is installed successfully by confirming there is “USB
Serial Port (COM4)” under “Computer Manager”.
Strep 7 – Open the other file on the desktop and then open “Digiloader1” inside it.
Step 8 – Select “COM4 – USB Serial”, “Digi1.bin” and click “Select the port and
click me”.
Step 9 – Wait for a few minutes until you got the following prompt “Process end”.
The V4.94 Digiprog software is installed successfully.
About Digiprog III V4.94
The latest Digiprog III is much similar with the V4.88 except the vehicle coverage. The 4.94
Digiprog 3 adds support for the following cars:
V4.94 Digiprog III Digiprog3 modèles ajoutés:
For Audi :
-A3 new version
For Ford:
-F150 24C16
-Falcon 24c02
For Mercedes:
-W176 new version
-W204 new version Diag
-w212 new version Diag
For Opel:
-Insignia new version
-Astra new version
For Audi:
A3 Diag new version
A6 Diag new version
A8 Diag new version
For Mercedes:
R 172 Diag new version
R 231 Diag new version
W 212 Diag new version
For Ford:
Kuga Transit
For VW:
Amarok Polo Johnson
Here is a full list of Digiprog 3 V4.94 supported vehicle:
http://www.diyobd2.fr/upload/pro/v4.94-digiprog3-vehicle-list.pdf