Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S1 of 15

DIY-PP3PTRL20

™

™

™

Three-Post Trellis

Sheet List

Sheet No. Sheet Name

S1 Perspective View

S2 Foundation Plan

S3–S4 Roof Plan

S5 Front Elevation

S6 Corner Post-to-Beam Connection

S7 Post-to-Beam Connection

S8 Post-to-Footing Connection

S9–S10 Material Takeoff — Framing

S11 Material Takeoff — Connectors

Perspective View

Sometimes that backyard oasis is not an area of great expanse. That’s where this three-post trellis comes in handy for modest outdoor spaces. Its triangle shape fits nicely into the corner of a backyard and provides an attractive and practical gathering area.

Built with Simpson Strong-Tie® connectors and fasteners, including Outdoor Accents® decorative hardware, this trellis brings strength and beauty to rural and suburban living spaces. At its foundation are MPBZ moment post bases, which substantially reduce the need for knee bracing, enable wider openings and are sturdy enough to withstand seismic and high-wind forces.

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S2 of 15

Three-Post Trellis

7'-8½"

Foundation Plan

15' o.c.

7'-6" o.c.

6x6A

Post

@ postCL@ postCL

@ postCL

@ postCL

Post-to-footingconnection

Concrete slab and foundation designed

by others.

1S8

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S3 of 15

Three-Post Trellis

66 6

66 6

66 6

66 6

66 6

66 6

66 6

66 6

66 6

66

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6 6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

Corner post-to-beamconnection

Side beam, typ.

Side beam, typ.APA21 with SD10112DBB

on center of each beam/joistconnection, typ.

Attach side beamto front beam

with HSULC46with SD9212.

Apply black corrosionprotective coatingto skewed hanger.

45°

Post-to-beamconnection 15'

1'-6" typ.

1'-6"Typ.

10¼"Typ.

1' typ.

1'

7'-6"

7'-8½"

1'

1' typ.

Attach side beamwith HSURC46with SD9212. Applyblack corrosionprotective coatingto skewed hanger.

Front beam,with decorativeend cuts

@ postCL @ postCL

CL

Roof Plan

1S4 Front elevation

4x8F

4x8E

6x8D

1S7

1S6

Roof Plan

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S4 of 15

Three-Post Trellis

66 6

66 6

66 6

66 6

66 6

66 6

66 6

66 6

66 6

66

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6 6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

@ 10.25" o.c. withchamfered end cut, typ.

Roof Plan (Details)

Joist with decorative end cuts, typ.

2x8I

Joist with decorative end cuts, typ.

2x8L

3x3R

@ 10.25" o.c. withchamfered end cut, typ.

3x3Q

@ 10.25" o.c. withchamfered end cut, typ.

3x3P

@ 10.25" o.c. withchamfered end cut, typ.

3x3O

@ 10.25" o.c. withchamfered end cut, typ.

3x3N

@ 10.25" o.c. withchamfered end cut, typ.

3x3M

Joist with decorative end cuts, typ.

2x8J

Joist with decorative end cuts, typ.

2x8K

Joist with decorative end cuts, typ.

2x8H

Joist with decorative end cuts, typ.

2x8G

Roof Plan (Details)

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S5 of 15

Three-Post Trellis

9'

10'-5"

Skirt, all sides. See notes.

6x6 post

Joist with decorative end cuts,typ. See notes

With 45° chamfered end cut, typ.

Post-to-footing connection

Trim at all post corners,with 45° mitered corners. See notes.

Skirt, all sides. See notes.

1'-6"typ.

APA21 with SD10112DBBOffset ties on each side of beamto allow for connector screwson both sides

15'

1'-6" o.c.

@ post

Post-to-beam connection

Beam with decorative end cut, typ.See notes.

CL @ postCL

Front Elevation

Finish surface

6x6A

1x10B

1x10B

1x2C

6x8D

2x8I

3x3M

1S7

1S8

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

Front ElevationNotes:1. Consult designer to verify post specifications.2. Conceal electrical and low voltage bale.3. Apply two coats stain or paint prior to assembly and touch-up paint or stain once installed.

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S6 of 15

Three-Post Trellis

Consult designer to verify post specifications.1. Notes:

Conceal electrical and low voltage cable.2. Apply two coats stain or paint prior to assembly and touch-up paint or stain once installed.3.

Corner Post-to-Beam Connection

SDWS22500DBat each joist connection

With 45° chamferedend cuts, typ.

3x3R

Joist with decorative end cut at beam, typ.

2x8I

3"

45°

Skirt with45° mitered corners,

all sides. Fasten 1x10 to postwith (2) T07225WP trim screws

each side of post.

Post. See notes.

Trim at all post corners,with 45° mitered corners.

Fasten 1x2 to post withT07225WP trim screws

at 12" o.c.

6x6A

1x2C

1x10B Wood beam with

decorative end cut, typ.

Column cap ECCLLQ464SDS.Apply black corrosionprotective coatingto skewed hanger.

4x8F

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S7 of 15

Three-Post Trellis

With 45° chamferedend cuts, typ.

SDWS22500DB at each joist

Beam with decorative end cut, typ.Locate beam to be flush with skirt.

Joist with decorative end cut, typ.

Skirt with45° mitered corners,

all sides. Fasten 1x10 to postwith (2) T07225WP trim screws

each side of post.

45°

3"

7¼"

APA21 with SD10112DBBOffset ties on each side of beamto allow for connector screwson both sides

APT6 with SDWS22312DBB with STN22

Post

Trim at all post corners,with 45° mitered corners.

Fasten 1x2 to post with T07225WP trim screws

at 12" o.c.

Post-to-Beam Connection

6x6A

1x2C

6x8D

2x8L

3x3M

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

3.5

WS22

1x10B

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S8 of 15

Three-Post Trellis

1. Consult designer to verify post and reinforced footing specifications.2. See the catalog pages at strongtie.com/MPBZ for footing reinforcement options.3. Apply two coats stain or paint prior to assembly and touch-up paint or stain once installed.

Notes:

Post

MPB66Z post base

Post trim at post corners,with 45° mitered corners, all sides.Fasten 1x2 to post withT07225WP trim screws at 12" o.c.

Skirt with 45°mitered corners, all sides.Fasten 1X10 skirt with (2)T07225WP trim screws at each corner.

Perdesigner

Per designer

Finished grade

Post-to-Footing Connection

Post Plan View

Post trim, with 45°mitered corners, all sides

Post

Skirt with 45°mitered corners, all sides

6x6A

6x6A

1x10B

1x10B

1x2C

1x2C

Subgrade preparation per designer

Reinforced concrete footingper designer

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S9 of 15

Three-Post Trellis

11'-⅝" (E)4x8 x 12' (x1)

Framing Schedule

Nominal Size Quantity Mark Cut Length6x6 3 A 8'-11"

2x8 1 G 9'-8½"

1x10 24 B 7"C

11

6x8E

18'

1x2 24

D

7'-5½"

4x8 1 F 10'-7⅝"

4x8 11'-⅝"

2x8 2 H 8'-9¾"2x8 2 I 7'-3¾"2x8 2 J 5'-9¾"2x8 2 K 4'-3¾"2x8 2 L 2'-9¾"3x33x33x33x33x33x3

1 M 18'2 N 17'1 O 14'2 P 11'2 Q 8'2 R 5'

18' (D)

(x24)1x2 x 8'7'-5½" (C) 1½"(C)

4¼" 4¼"

6x6 x 10' (x3)8'-11" (A)

6x8 x 18' (x1)

10'-7⅝" (F)4x8 x 12' (x1)

(x2)1x10 x 8'

7" (B)7"(B)

B-B

SECTION C-CC-C

45° Typ.

SECTION B-B

45° Typ.

Framing Schedule

Nominal Size Quantity Mark Cut Length6x6 3 A 8'-11"1x10 24 B 7"1x2 24 C 7'-51/2"6x8 1 D 18'4x8 1 E 11'-5/8"4x8 1 F 10’-75/8"2x8 1 G 9'-81/2"2x8 2 H 8'-93/4"2x8 2 I 7'-33/4"2x8 2 J 5'-93/4"2x8 2 K 4'-33/4"2x8 2 L 2'-93/4"3x3 1 M 18'3x3 2 N 17'3x3 1 O 14'3x3 2 P 11'3x3 2 Q 8'3x3 2 R 5'

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S10 of 15

Three-Post Trellis

(x1)

18' (M)

3x3 x 18'

(x2)

17' (N)

3x3 x 14' (x1)

14' (O)

2x8 x 10' (x1)

9'-8½" (G)

4¼" 4¼"

(x2)

8'-9¾" (H) 2'-9¾" (L)

2x8 x 12'

(x2)11' (P)

3x3 x 8' (x2)8' (Q)

3x3 x 10' (x1)5' (R) 5' (R)

(x2)

7'-3¾" (I) 4'-3¾" (K)

(x1)

5'-9¾" (J) 5'-9¾" (J)

3x3 x 12'

M-M

N-N

O-O

P-P

Q-Q

R-R

SECTION M-M

45°Typ.

18'(M)

SECTION N-N

45°Typ.

17'(N)

SECTION O-O

45°Typ.

14'(O)

SECTION P-P

45°Typ.

11'(P)

SECTION Q-Q

45°Typ.

8'(Q)

SECTION R-R

45°Typ.

5'(R)

Date: 5-1-20 | Scale: Not to Scale | Sheet Number: S11 of 15

Three-Post Trellis

Simpson Strong-Tie® Connector and Fastener Schedule

Model QuantityAPA21

3MPB66Z*1

1

1

ECCLLQ46SDS*

2APT6

HSULC46

HSURC46

12

SDWS22500DBB88SD10112DBB72

SD9212 32240

12STN22

SDWS22312DBB

DescriptorOutdoor Accents® 90° Angle

6x6 Moment Post BaseColumn Cap

Outdoor Accents T Strap

Skewed 45° (Left) Hanger

Skewed 45° (Right) Hanger

5" Strong-Drive SDWS TIMBER ScrewOutdoor Accents Connector Screw

Strong-Drive® SD Connector Screw #9 x 2½"T07225WP Deck-Drive DWP Wood Stainless Steel Screw

Outdoor Accents Hex-Head Washer

3½" Outdoor Accents Structural Wood Screw

44

MPB66Z (3)

(44)APA21ECCLLQ46SDS (1)

APT6 (2) HSURC46 (1)HSULC46 (1)

SD10112DBB (88)

SDWS22312DBB (12)

(72)SDWS22500DB

STN22 (12)

*Fasteners included with product.

(32)SD9212

(240)T07225WP

Simpson Strong-Tie® Connector and Fastener Schedule

Model Description QuantityAPA21 Outdoor Accents® 90° Angle 44

MPB66Z* 6x6 Moment Post Base 3ECCLLQ46SDS* Column Cap 1

APT6 Outdoor Accents T Strap 2HSULC46 Skewed 45° (Left) Hanger 1HSURC46 Skewed 45° (Right) Hanger 1

STN22 Outdoor Accents Hex-Head Washer 12SDWS22312DBB 31/2" Outdoor Accents Structural Wood Screw 12SDWS22500DB 5" Strong-Drive® SDWS TIMBER Screw 72SD10112DBB Outdoor Accents Connector Screw 88

SD9212 Strong-Drive® SD CONNECTOR Screw #9 x 21/2" 32T07225WP Deck-Drive™ DWP Wood Stainless Steel Screw 240

*Fasteners included with product.

12

License Agreement and Terms

Effective Date: July 10, 2019

PLEASE READ THIS LICENSE AGREEMENT (“AGREEMENT”) BEFORE ACCESSING OR USING THEDRAWINGS OR PLANS (“PLANS”). IF YOU AGREE TO THE TERMS OF THIS AGREEMENT, PRESS THE “IAGREE” BUTTON, WHICH INDICATES THAT YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OFTHIS AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS, DO NOT PRESS “I AGREE” AND DO NOTDOWNLOAD OR USE THE PLANS. ACCESSING OR USING THE PLANS INDICATES YOUR ACCEPTANCE OFTHE FOLLOWING TERMS AND CONDITIONS.

IN ADDITION TO THE TERMS AND CONDITIONS SET FORTH BELOW, WHICH APPLY TO YOUR USE OF THEPLANS, YOUR USE OF THE STRONGTIE.COM WEBSITE IS GOVERNED BY AND SUBJECT TO THE TERMS AND CONDITIONS OF THE SIMPSON STRONG-TIE USER AGREEMENT AND OUR PRIVACY POLICY.

PLEASE REFER TO THE COMPANY’S CATALOGS AND OTHER INFORMATION AVAILABLE ON THESTRONGTIE.COM WEBSITE FOR ALLOWABLE LOADS, CORRECT COMPONENT SPECIFICATIONS,CORRECT FASTENERS, GENERAL NOTES, GENERAL INSTRUCTIONS FOR THE INSTALLER, GENERALINSTRUCTIONS FOR THE DESIGNER, CORROSION INFORMATION, TERMS & CONDITIONS OF SALE,BUILDING CODES, BUILDING CODE EVALUATION REPORT LISTINGS AND OTHER IMPORTANTINFORMATION ABOUT THE COMPANY’S PRODUCTS. TO OBTAIN A COPY OF THESE CATALOGS OR IF YOUHAVE ANY QUESTIONS, PLEASE CONTACT YOUR SIMPSON STRONG-TIE REPRESENTATIVE OR WRITE ORCALL THE COMPANY AT:

SIMPSON STRONG-TIE COMPANY INC.5956 W. LAS POSITAS BLVD.PLEASANTON, CA 94588(800) 999-5099

LIMITED LICENSESubject to the terms and conditions of this Agreement, Simpson Strong-Tie Company Inc. (“Company”) grants you alimited, non-exclusive, personal, nontransferable, nonsublicensable right and license to access and use the Plans.No other right or license of any kind is granted by Company to you with respect to the Plans.

RESTRICTIONSYou may not: (1) modify or create any derivative works based on the Plans, or any portion thereof; (2) market, rent orlease the Plans for a fee or charge; (3) represent that the Plans, or any part thereof, is owned by any party other thanthe Company; (4) remove or alter any proprietary notices, labels, marks or identifying information of any kind on thePlans; (5) incorporate the Plans or any portion thereof into any other plans or product; (6) use the Plans or anyportion thereof (including, without limitation, Simpson Strong-Tie product names, nomenclature, model numbers orany other trademarks) to refer to or facilitate selection of any products other than Simpson Strong-Tie products; or (7) use the Plans for any purpose other than in accordance with the terms and conditions of this Agreement.

The Company retains all right, title, and interest in the Plans including, without limitation, all patent rights, copyrights,trademarks and trade secrets, in and to the Plans, any portion or copy thereof, and any derivative work, regardless ofthe form or media in or on which the original or other copies may subsequently exist. You agree to take any actionreasonably requested by Company to evidence, maintain, enforce or defend any of the foregoing rights. You shallnot take any action to jeopardize, limit or interfere in any manner with Company’s ownership of and rights withrespect to the Plans, or any derivative work. Unauthorized copying or use of the Plans or any part thereof or failure tocomply with the above restrictions will result in automatic termination of this license and will make available toCompany other legal remedies. This license is not a sale of the original or any backup copy. If any of the Company’scopyrighted works are reproduced or their contents displayed, you must include the legend “Copyright (c) 2017Simpson Strong-Tie Company Inc. All rights reserved.”

13

License Agreement and Terms

NO WARRANTYCOMPANY MAKES NO WARRANTY WITH RESPECT TO THE PLANS. THE PLANS ARE MADE AVAILABLE “ASIS” AND WITH ALL FAULTS. COMPANY DOES NOT WARRANT THAT THE PLANS WILL BE FREE FROMERRORS OR THAT ERRORS WILL BE CORRECTED. THE SIMPSON STRONG-TIE PRODUCTS IDENTIFIED INTHE PLANS ARE COVERED BY THE LIMITED WARRANTY IN EFFECT AS OF THE PURCHASE DATE. YOUACKNOWLEDGE THAT COMPANY DOES NOT HAVE CONTROL OVER YOUR USE OF THE PLANS, ANDCOMPANY DOES NOT WARRANT THE PERFORMANCE OR RESULTS THAT MAY BE OBTAINED THROUGHYOUR USE OF THE PLANS. YOU ASSUME ALL RISKS AND RESPONSIBILITY FOR YOUR USE OF THEPLANS. COMPANY MAKES AND YOU RECEIVE NO REPRESENTATIONS, WARRANTIES OR CONDITIONS,EXPRESS, IMPLIED, STATUTORY OR ALLEGEDLY EXTENDED IN ANY COMMUNICATION WITH YOU. WHERELAWFUL, COMPANY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIESARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. IN NO EVENT WILLCOMPANY BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR SPECIAL DAMAGES OR DIRECTOR INDIRECT LOSS OF ANY KIND, INCLUDING BUT NOT LIMITED TO PROPERTY DAMAGE, DEATH ANDPERSONAL INJURY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTYLASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THEABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN ADDITION, YOU MAY ALSO HAVE OTHERRIGHTS WHICH VARY FROM STATE TO STATE.

WARNING AND DISCLAIMERYOUR USE OF THE PLANS MUST BE REVIEWED AND APPROVED BY QUALIFIED PROFESSIONALSFAMILIAR WITH ALL APPLICABLE BUILDING CODES. THE SPECIFIC DESIGN AND LOCATION OF THESTRUCTURE, THE BUILDING MATERIALS USED, THE QUALITY OF CONSTRUCTION, THE CONDITION OFTHE SOILS OR SUBSTRATES INVOLVED, AND SITE-SPECIFIC LOADING DUE TO THE PARTICULARCHARACTERISTICS OF POTENTIAL IMPACT EVENTS SUCH AS EARTHQUAKES AND HIGH VELOCITY WINDSWILL AFFECT THE STRENGTH AND SAFETY OF THE STRUCTURE OR PROJECT.

THE PLANS ARE NOT A SUBSTITUTE FOR PROFESSIONAL JUDGEMENT. A QUALIFIED PROFESSIONALMUST CONFIRM THAT THE PLANS MAY BE USED AT YOUR SITE BY REFERRING TO ALL APPLICABLEBUILDING CODES, AMENDMENTS AND ALL OTHER RELEVANT INFORMATION, INCLUDING WITHOUTLIMITATION THE CURRENT SIMPSON STRONG-TIE CATALOGS AND WEBSITES. DUE TO THE LARGEVARIETY OF POTENTIAL APPLICATIONS FOR THE PLANS, COMPANY SHALL NOT BE LIABLE IN ANYMANNER WHATSOEVER FOR THE RESULTS OBTAINED THROUGH THE USE OF THE PLANS. THE PLANSARE INTENDED TO BE USED ONLY IN CONJUNCTION WITH COMPANY PRODUCTS.

LIMITATION OF LIABILITYIN NO EVENT WILL COMPANY BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA ORINFORMATION OF ANY KIND, LOSS OF BUSINESS, LOST PROFITS, INTERRUPTION OF BUSINESS, COST OFCOVER OR ANY OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING OUTOF THIS AGREEMENT OR THE USE OR INABILITY TO USE THE PLANS, HOWEVER CAUSED, AND ON ANYTHEORY OF LIABILITY (WHETHER IN CONTRACT, TORT, INDEMNITY OR OTHERWISE). THIS LIMITATIONWILL APPLY EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. YOUACKNOWLEDGE THAT THE ROYALTY-FREE BASIS FOR RECEIVING THIS LICENSE REFLECTS THISALLOCATION OF RISK. IF YOU OBTAINED THIS LICENSE IN THE UNITED STATES, SOME STATES DO NOTALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES,SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

14

License Agreement and Terms

TERM AND TERMINATIONThe license provided herein is effective until terminated. This license automatically terminates if you fail to complywith its terms and conditions.

EFFECT OF TERMINATIONTermination of this Agreement by Company shall not act as a waiver of any breach of this Agreement and shall notrelease you from any liability for breach of your obligations under this Agreement. Company shall not be liable to youfor damages of any kind as a result of terminating this Agreement in accordance with its terms, and termination of thisAgreement by Company shall be without prejudice to any other right or remedy of Company under this Agreement orapplicable law.

INDEMNIFICATIONBy accepting this Agreement you agree to defend, indemnify and hold harmless Company, its officers, employers,agents, subsidiaries and affiliates from any direct, indirect, incidental, special, consequential or exemplary damagesarising out of, relating to, or resulting from your breach of this Agreement, use of the Plans or any act or omission byyou.

ASSIGNMENTThis Agreement may not be assigned, in whole or part, whether voluntarily, by operation of law or otherwise, by youwithout the prior written consent of Company. Subject to the preceding sentence, the rights and liabilities of theparties hereto is binding on, and shall inure to the benefit of, the parties and their respective successors and assigns.Any attempted assignment other than in accordance with this section shall be null and void.

SEVERABILITYIf the plans of any provision of this Agreement to any particular facts or circumstances shall be held to be invalid orunenforceable by an arbitration panel or a court of competent jurisdiction, then: (a) the validity and enforceability ofsuch provision as applied to any other particular facts or circumstances and the validity of other provisions of thisAgreement shall not in any way be affected or impaired thereby, and (b) such provision shall be enforced to themaximum extent possible so as to effect the intent of the parties and reformed without further action by the parties tothe extent necessary to make such provision valid and enforceable.

RELATIONSHIP OF THE PARTIESNothing contained in this Agreement shall be deemed or construed as creating a joint venture, partnership, agency,employment or fiduciary relationship between the parties. Neither party nor their agents have any authority of anykind to bind the other party in any respect whatsoever, and the relationship of the parties is, and at all times shallcontinue to be, that of independent contractors.

FORCE MAJEURECompany shall not be responsible or have any liability for any delay or failure to perform to the extent due tounforeseen circumstances or causes beyond its reasonable control, including, without limitation, acts of God,earthquake, fire, flood, embargoes, labor disputes and strikes, riots, war, novelty of product manufacture or otherunanticipated product development problems, and acts of civil and military authorities.

ENTIRE AGREEMENTThis Agreement, along with the Simpson Strong-Tie User Agreement and Privacy Policy, constitutes the entireagreement between the parties concerning the subject matter hereof and thereof, and supersedes all prior orcontemporaneous representations, discussions, proposals, negotiations, conditions, agreements andcommunications, whether oral or written, between the parties relating to the subject matter of this Agreement and allpast courses of dealing or industry custom. No amendment or modification of any provision of this Agreement shallbe effective unless in writing and signed by a duly authorized signatory of Company and you.

DIY-PP3PTRL20 5/20 exp. 12/24© 2020 Simpson Strong-Tie Company Inc. • P.O. Box 10789, Pleasanton, CA 94588

(800) 999-5099strongtie.com/diy

The construction plan for this project is designed to be completed by people with basic carpentry skills in standard situations. If your situation is unique, talk with someone with detailed carpentry or construction experience before starting your project. Particular attention was paid to the steps and details in this plan, but they cannot be guaranteed to be error free. Simpson Strong-Tie shall not be responsible for any possible loss, damage or injury resulting directly or indirectly from the information contained here.

License Agreement and Terms

GENERALThis agreement shall be governed by the laws for the State of California, without regard to choice of law or conflicts oflaw principles. You agree that any action, suit, or proceeding arising from or related to use of the Plans shall bebrought exclusively in the federal or state courts of the State of California.

For help in using the Plans, refer to the information made available on the Company’s website. For technicalengineering support, call (800) 999-5099.