Dixie Diamond Manufacturing 2016 Distribution Catalog
description
Transcript of Dixie Diamond Manufacturing 2016 Distribution Catalog
2016 Product Catalog
800.654.7224 phone • 800.256.3304 fax2
Team
Greg Wolters
Tim Barnette31 Years Experience
Professional Sales and Technical Support Specialist
Neil (Rocky) Roquet15 Years Experience
Plant Manager
Andrew Cembor22 Years Experience
Professional Sales and Technical Support Specialist
Karen Rhodes27 Years Experience
Purchasing Specialist
Allison Rowe27 Years Experience
Professional Sales Accounts Specialist
Tim French6 Years Experience
Professional Sales and Technical Support Specialist
Sandra Parker11 Years Experience
Director of First Impressions
Wes Scroggins26 Years Experience
Production Manager
Garrett Wolters
DiscountsFreight is prepaid on blade and bit orders of $400 or more. Freight prepaid and add on Equipment.
Blades
Bits
EquipmentParts
Adapters
3www.dixiediamond.com2016 Product Catalog
Table of Contents
CURED CONCRETEDRY OR WET
El Toro - Budget Series ..................................................4NCS - Value Series ............................................................4DSG - Charger Series ......................................................5DSLP18 - Signature Series ............................................5GT Pro ......................................................................................6
WET CURED CONCRETE
HP10 - High Performance ..........................................10CP - Premium Series .....................................................10Professional 4500 Series ..............................................11Traffic Loop Sawing ........................................................6
ASPHALTDRY OR WET
El Toro - Budget Series ................................................ 12NCSA - Value Series ...................................................... 12DSG71 - Charger Series ............................................... 12DSLP77 - Signature Series ......................................... 13DSLP78 - Asphalt Overlay ......................................... 13
WET ASPHALT
HP90 - High Performance .........................................14AP90 - Premium Wet Asphalt ................................14
WET ASPHALT OVERLAYASPHALT OVER CONCRETE
HP100 - High Performance ....................................... 15AP100 - Premium Wet Asphalt Overlay ........... 15
BRICK, PAVER & BLOCKDRY OR WET
NCSM - Value Series .....................................................16DSG400 - Charger Series ..........................................16DSLPU - Signature Series ........................................... 17
CONCRETE, BRICK, PAVERS, BLOCK, LANDSCAPE BLOCK & STONEDRY OR WET
Hardscaper ...........................................................................8
CONCRETE, BRICK, BLOCK & ASPHALTDRY OR WET
Dual Blade .............................................................................7Double Eagle .......................................................................7
SPECIALTY BLADESDRY OR WET
Fresh Cut - Early Entry .........................................18-19Segmented Cup Wheels ...........................................20Spiral Cup Wheels .........................................................20Turbo Blades ...................................................................... 21Segmented Blades ......................................................... 21Tuck Pointing Blades ...................................................22Split Tuck Pointing Blades ........................................22Crack Chasers ..................................................................23Tile Saw Blades ...............................................................23Pipe Cutter • Fire & Rescue .........................................9Ductile Iron ............................................................................9MP900 - Wet Refractory ..........................................24Diamond Grinding Heads .........................................25Grinding Inserts ...............................................................25Bulldog Blade ......................................................................8DGC - Dry Green Concrete ......................................24
CORE BITS
BP - Premium Series ....................................................32BS - Supreme Series ....................................................33BV Ultimate Series .........................................................28BV-U Ultimate Series....................................................29CBSP - Small Diameter ................................................31BD - Dry Masonry Bit ....................................................31BDX - Dry Masonry Bit Extreme ............................31Core Drilling Adaptors & Extensions ..................35Twister Bit ...........................................................................30Extra Length Tubing.....................................................34
EQUIPMENT
Cardi Hand Held Core Drills .....................................36Cardi Hand Held Drill Stands ..................................37DMX20VE Core Drill Rig ............................................38DDM13-18E Walk Behind Saw ................................39 DDM Point of Sale .........................................................40DDM Promotion Schedule .......................................40
800.654.7224 phone • 800.256.3304 fax4
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Size Part Number List Price12” x .125” x 1”-20mm 12SEG $98
12” x .125” x 20mm 12SEG20 $98
14” x .125” x 1”-20mm 14SEG $127
14” x .125” x 20mm 14SEG20 $127
12mm Segment10 & 20 Piece Pricing Available
Description Part Number Net Price1” OD x 20mm ID x 9.5mm thick BUSHING20 $1.50
1” OD X 20mm ID X 2.5mm thick BUSHING20THIN $1.50
Size Part Number List Price12” x .110” x 1-20mm NCS12110 $199
14” x .110” x 1-20mm NCS14110 $254
14” x .125” x 1-20mm NCS14125 $291
16” x .125” x 1-20mm NCS16125 $344
.300” Diamond Depth10 Piece Pricing Available
El Toro Budget Series
NCS Value Series
Cured ConcreteWet or Dry
SINTERED SEGMENTS
COOL TECH TECHNOLOGYLASER WELDED
5X MORE LIFE
BUSHINGSAVAILABLE ON ALL
12”-16” BLADES
5www.dixiediamond.com2016 Product Catalog
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Size Part Number List Price12” x .110” x U/A DSG12110 $248
14” x .110” x 1”-20mm DSG14110 $304
14” x .125” x 1”-20mm DSG14125 $351
16” x .125” x 1”-20mm DSG16125 $409
18” x .125” x 1” DSG18125 $720
20” x .140” x 1” DSG20140 $784
U/A = Universal Arbor 1” to 20mm
.350” Diamond Depth
Size Part Number List Price10” x .110” x 5/8” - 1” DSLP1810110 $250
12” x .110” x U/A DSLP1812110 $322
12” x .125” x U/A DSLP1812125 $370
12” x .187” x 1” DSLP1812187 $525
12” x .250” x 1” DSLP1812250 $600
14” x .110” x 1”-20mm DSLP1814110 $395
14” x .125” x 1”-20mm DSLP1814125 $455
14” x .187” x 1” DSLP1814187 $575
14” x .250” x 1” DSLP1814250 $665
16” x .125” x 1”-20mm DSLP1816125 $532
18” x .125” x 1” DSLP1818125 $772
20” x .140” x 1” DSLP1820140 $860
U/A = Universal Arbor 1” to 20mm
.350” Diamond Depth
DSG Charger Series
DSLP18 Signature Series
Cured ConcreteWet or Dry
LASER WELDED
LASER WELDED
HIGHLIGHTS• DRY or WET cut with all of these blades.• EQUIPMENT to be used is a high-speed hand-held saw, masonry saw or 5-13HP concrete saw.
• OTHER MATERIALS to cut include; brick pavers, retaining wall block and precast.
LOWER PRICELOWER PRICE
800.654.7224 phone • 800.256.3304 fax6
Size Diamond Height Part Number List Price
14 X .125 X 1-20mm 0.450 GTPRO14 $335
16 X .125 X 1-20mm 0.450 GTPRO16 $386
Size# of Seg.
ConcreteSofter Bond(DB104/103)
AsphaltHarder Bond(DB428/429)
List Price
14 X 187 24 TLC14187 TLA14187 $798
14 X 220 24 TLC14220 TLA14220 $972
14 X 250 24 TLC14250 TLA14250 $1,004
14 X 312 24 TLC14312 TLA14312 $1,010
14 X 375 24 TLC14375 TLA14375 $1,236
14 X 500 24 TLC14500 TLA14500 $1,470
GT Pro High Speed Blade
Traffic Loop
800.654.7224 phone • 800.256.3304 fax6
Cured ConcreteWet or Dry
• Slanted directional gullets were designed to kick the cuttings away from the joint while keeping the blade cool.
• Free cutting diamond segments designed to cut heavily reinforced concrete such as pilings.
• Includes aggressive “U” segment design for fast cutting variety of materials with reduced friction: Concrete, Pavers, Brick and stone.
Wet CuttingLong life, low cost per foot and reliable performance.
7www.dixiediamond.com2016 Product Catalog 7
Concrete, Brick, Block & Asphalt
Wet or Dry
Brick AsphaltLandscape
Block Block Concrete
Size Part Number List Price12” x .110” x U/A DUAL12110 $308
14” x .110” x 1”-20mm DUAL14110 $341
14” x .125” x 1”-20mm DUAL14125 $403
16” x .125” x 1”-20mm DUAL16125 $539
18” x .125” x 1”-20mm DUAL18125 $675
U/A = Universal Arbor 1” to 20mm
.350” Diamond Depth
Size Part Number List Price14” x .125” x 1”-20mm DE14125 $324
16” x .125” x 1”-20mm DE16125 $417
.450” Diamond Depth
Dual Blade
Double Eagle Blade
Concrete, Asphalt, Brick & BlockNote: If cutting Asphalt or Block ONLY, we recommend a material specific blade: Asphalt (pg. 12-13), Block (pg. 17).
Concrete, Asphalt, Brick & BlockNote: If cutting Asphalt or Block ONLY, we recommend a material specific blade: Asphalt (pg. 12-13), Block (pg. 17).
Double Eagle Blades have 2 copper inserts in the segments to provide high speed performance, long blade life, and strength
800.654.7224 phone • 800.256.3304 fax8
Concrete, Brick, Pavers, Block, Landscape Block & StoneWet or Dry
Size Part Number List Price12” x .110” x U/A HS12110 $297
14” x .125” x 1”-20mm HS14125 $374
16” x .125 x 1” HS16125 $489
U/A = Universal Arbor 1” to 20mm
.350” Diamond Depth
Hardscaper Signature Series
Concrete, Brick, Pavers, Block, Landscape Block & Stone
Sugested Types of Stone Includes:Fieldstone, Flagstone, Limestone, Slate
Brick PaverLandscape
Block Block Stone
Bulldog Blade
Size Part Number List Price12” x .125” x 1”-20mm DAWG12125 $212
14” x .125” x 1”-20mm DAWG14125 $242
16” x .125” x 1”-20mm DAWG16125 $376
14mm Diamond Depth
Brick, Concrete, Asphalt, Block, Concrete Pavers & Granite“It takes a bite out of anything!”
Alternating Standard & Turbo Segments for High Speed Cutting with Turbo Cooling Core
9www.dixiediamond.com2016 Product Catalog
Specialty BladesFire & Rescue • Ductile
Pipe Cutting • Fire & Rescue • General Purpose
SPECIAL SEGMENT DESIGNFAST CUTTING AND COOLING
*Silicon Carbide to Eliminate Pinching
Size Part Number List Price4” X .080” X 7/8” PC4PLAIN $73
4.5” X .080” X 7/8” PC4.5PLAIN $78
7” X .095” X U/A PC7PLAIN $140
12” X .125” X 1” PC12* $285
12” X .125” X 20mm PC1220* $366
14” X .125” X 1 PC14* $330
14” X .125” X 20mm PC1420* $454
16” X .125” X 1” PC16* $610
PLAIN means cores do not have silicon carbide coating
Steel, PVC Pipe, Ductile Iron, Cast Iron, Rebar, Fiber Board, Fiberglass, Copper, Concrete, Masonry, Stone, Stucco, Wood, HDPE
Ductile IronCuts ductile iron and cast iron.Turbo segments help cool blade.Use on high speed saws.
Size Part Number List Price12” x .100” x 1” DUCT12 $283
12” x .100” x 20mm DUCT1220 $283
14” x .100” x 1” DUCT14 $345
14” x .100” x 20mm DUCT1420 $345
16” x .125” x 1” DUCT16 $420
16” x .125” x 20mm DUCT1620 $420
800.654.7224 phone • 800.256.3304 fax10
Size Part Number List Price14” x .110” x 1” HP1014110 $438
14” x .125” x 1” HP1014125 $471
16” x .125” x 1” HP1016125 $553
18” x .125” x 1” HP1018125 $618
20” x .140” x 1” HP1020140 $644
24” x .155” x 1” HP1024155 $798
.300” Diamond Depth
HP10 High Performance
GREAT FOR ELECTRIC SLAB SAWS!
HP10 is uniquely designed for aggressive, fast-cutting of cured concrete in wet applications. 1.5” long segments create extended blade life and maximum cutting speed. Diamond depth of .300” includes high quality diamond and powder matrix providing maximum inch footage.
Wet Cured Concrete
CP Premium SeriesCP10 - Very hard aggregates, bridge deck, and heavy reinforcement
CP20 - Medium to hard aggregates with moderate reinforcement
Size CP10 Part # CP20 Part # List Price14” x .125” CP1014125 CP2014125 $535
14” x .140” CP1014140 CP2014140 $623
16” x .125” CP1016125 CP2016125 $681
16” x .140” CP1016140 CP2016140 $770
18” x .125” CP1018125 CP2018125 $917
18” x .140” CP1018140 CP2018140 $987
20” x .140” CP1020140 CP2020140 $1,068
20” x .155” CP1020155 CP2020155 $1,074
24” x .155” CP1024155 CP2024155 $1,283
24” x .187” CP1024187 CP2024187 $1,494
26” x .155” CP1026155 CP2026155 $1,424
26” x .187” CP1026187 CP2026187 $1,673
30” x .187” CP1030187 CP2030187 $1,832
30” x .250” CP1030250 CP2030250 $2,321
36” x .187” CP1036187 CP2036187 $2,481
.250” Diamond Depth
35-72 HPSaw Recommended
5-35 HPSaw Recommended
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
11www.dixiediamond.com2016 Product Catalog
Wet Cured Concrete
The professional Wet Cured Concrete blades are manufactured with the highest quality raw materials for exceptional performance. The Professional Series bond is designed to cut hard aggregate with heavy reinforcement on 65 HP saws or greater. This product line will give the contractor the lowest cost per inch foot.
Size Part #14 X .125” C451814125
14 X .140” C451814140
16 X .125” C451816125
16 X .140” C451816140
18 X .125” C451818125
18 X .140” C451818140
18 X .155” C451818155
20 X .140” C451820140
20 X .155” C451820155
24 X .155” C451824155R
24 X .187” C451824187R
26 X .155” C451826155R
26 X .187” C451826187R
30 X .187” C451830187R
36 X .187” C451836187R
.450” Diamond Depth
C4518 Professional Call for Pricing
www.dixiediamond.com 112016 Product Catalog
35-72 HPSaw Recommended
800.654.7224 phone • 800.256.3304 fax12
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Size Part Number List Price12” x .125” x 1”-20mm AE12125 $160
14” x .125” x 1”-20mm AE14125 $186
14” x .125” x 20mm AE1412520 $186
12mm Segment10 & 20 Piece Pricing Available
Size Part Number List Price12” x .110” x 1"-20mm NCSA12110 $199
14” x .125” x 1"-20mm NCSA14125 $291
.350” Diamond Depth10 Piece Pricing Available
Size Part Number List Price12” x .110” x 1”-20mm DSG7112110 $248
14” x .125” x 1”-20mm DSG7114125 $351
.350” Diamond Depth
El Toro Asphalt Budget Series
NCSA Value Series
DSG71 Charger Series
AsphaltWet or Dry
13www.dixiediamond.com2016 Product Catalog
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Size Part Number List Price12” x .110” x U/A DSLP7712110 $322
12” x .125” x U/A DSLP7712125 $370
14” x .110” x U/A DSLP7714110 $395
14” x .125” x U/A DSLP7714125 $455
14” x .187” x 1” DSLP7714187 $575
14” x .250” x 1” DSLP7714250 $665
16” x .125” x 1”-20mm DSLP7716125 $532
18” x .125” x 1” DSLP7718125 $772
20” x .140” x 1” DSLP7720140 $860
U/A = Universal Arbor 1” to 20mm
.350” Diamond Depth
Size Part Number List Price14” x .110” x U/A DSLP7814110 $395
14” x .125” x U/A DSLP7814125 $455
14” x .187” x 1” DSLP7814187 $575
14” x .250” x 1” DSLP7814250 $665
16” x .125” x 1”-20mm DSLP7816125 $532
18” x .125” x 1” DSLP7818125 $772
20” x .140” x 1” DSLP7820140 $860
U/A = Universal Arbor 1” to 20mm
.350” Diamond Depth
DSLP77 Signature Series
DSLP78 Asphalt Overlay
AsphaltWet or Dry
SLANT SEGMENTS
DRY OR WET CUTTING OF ASPHALT ON TOP OF CONCRETE
Description Part Number Net Price1” OD x 20mm ID x 9.5mm thick BUSHING20 $1.50
1” OD X 20mm ID X 2.5mm thick BUSHING20THIN $1.50
BUSHINGSAVAILABLE ON ALL 12”-16” BLADES
LOWER PRICELOWER PRICE
LOWER PRICELOWER PRICE
800.654.7224 phone • 800.256.3304 fax14
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Size Part Number List Price14” x .125” HP9014125 $471
16” x .125” HP9016125 $553
18” x .125” HP9018125 $618
20” x .140” HP9020140 $644
24” x .155” HP9024155 $798
.350” Diamond Depth
Size # of Slants Part Number List Price14” x .125” 3 AP9014125 $564
14” x .140” 3 AP9014140 $654
16” x .125” 4 AP9016125 $759
16” x .140” 4 AP9016140 $818
18” x .125” 4 AP9018125 $932
18” x .140” 4 AP9018140 $1,009
20” x .140” 6 AP9020140 $1,028
20” x .155” 6 AP9020155 $1,032
24” x .155” 4 AP9024155 $1,179
24” x .187” 4 AP9024187 $1,377
26” x .155” 4 AP9026155 $1,307
26” x .187” 4 AP9026187 $1,533
30” x .187” 5 AP9030187 $1,671
30” x .250” 5 AP9030250 $2,125
36” x .187” 6 AP9036187 $2,270
36” x .250” 6 AP9036250 $2,724
.250” Diamond Depth
HP90 High Performance
AP90 Premium Wet Asphalt
NOTE SLANT SEGMENT DESIGNFOR UNDERCUT PROTECTION
(to protect core from wear)
35-72 HPSaw RecommendedAlso see Traffic Loops on p. 6
Wet Asphalt
High Production Sawing of Asphalt Only Application.
5-35 HPSaw Recommended
15www.dixiediamond.com2016 Product Catalog
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Size Part Number List Price14” x .125” HP10014125 $471
16” x .125” HP10016125 $553
18” x .125” HP10018125 $618
20” x .140” HP10020140 $644
24” x .155" HP10024155 $798
.350” Diamond Depth
Size # of Slants Part Number List Price14” x .125” 3 AP10014125 $564
14” x .140” 3 AP10014140 $654
16” x .125” 4 AP10016125 $759
16” x .140” 4 AP10016140 $818
18” x .125” 4 AP10018125 $932
18” x .140” 4 AP10018140 $1,009
20” x .140” 6 AP10020140 $1,028
20” x .155” 6 AP10020155 $1,032
24” x .155” 4 AP10024155 $1,179
24” x .187” 4 AP10024187 $1,377
26” x .155” 4 AP10026155 $1,307
26” x .187” 4 AP10026187 $1,533
30” x .187” 5 AP10030187 $1,671
30” x .250” 5 AP10030250 $2,125
36” x .187” 6 AP10036187 $2,270
36” x .250” 6 AP10036250 $2,724
.250” Diamond Depth
HP100 High Performance
AP100 Premium Wet Asphalt Overlay
Wet Asphalt OverlayAsphalt Over Concrete
35-72 HPSaw Recommended
NOTE SLANT SEGMENT DESIGNFOR UNDERCUT PROTECTION
(to protect core from wear)
Asphalt Overlay is when a concrete base is paved over or topped with a few inches of asphalt.
5-35 HPSaw Recommended
800.654.7224 phone • 800.256.3304 fax16
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Size Part Number List Price12” x .110” x 1-20mm NCSM12110 $199
14” x .110” x 1-20mm NCSM14110 $254
14” x .125” x 1-20mm NCSM14125 $291
20” x .140” x 1 NCSM20140 $400
.350” Diamond DepthQuantity Pricing Available
Size Part Number List Price12” x .110” x U/A DSG40012110 $248
14” x .110” x 1”-20mm DSG40014110 $304
14” x .125” x 1”-20mm DSG40014125 $351
16” x .125” x 1”-20mm DSG40016125 $409
18” x .125” x 1 DSG40018125 $648
20” x .140” x 1 DSG40020140 $693
.350” Diamond Depth
NCSM Value Series
DSG400 Charger Series
Brick and BlockWet or Dry
Description Part Number Net Price1” OD x 20mm ID x 9.5mm thick BUSHING20 $1.50
1” OD X 20mm ID X 2.5mm thick BUSHING20THIN $1.50
BUSHINGSAVAILABLE ON ALL
12”-16” BLADES
17www.dixiediamond.com2016 Product Catalog
Size Part Number List Price10” x .110” x 5/8 -1” DSLPU10010110 $245
12” x .110” x U/A DSLPU10012110 $322
14” x .115” x 1”-20mm DSLPU10014115 $408
20” x .140” x 1” DSLPU10020140 $777
24” x .155” x 1” DSLPU10024155 $982
.315” Diamond Depth
Size Part Number List Price10” x .110” x 5/8 -1” DSLPU40010110 $245
12” x .110” x U/A DSLPU40012110 $322
14” x .115” x 1”-20mm DSLPU40014115 $408
20” x .140” x 1” DSLPU40020140 $777
24” x .155” x 1” DSLPU40024155 $982
.315” Diamond Depth
Size Part Number List Price10” x .110” x 5/8 -1” DSLPU70010110 $245
12” x .110” x U/A DSLPU70012110 $322
14” x .115” x 1”-20mm DSLPU70014115 $408
20” x .140” x 1” DSLPU70020140 $777
24” x .155” x 1” DSLPU70024155 $982
.315” Diamond Depth
DSLPU 100 Signature Series
DSLPU 400 Signature Series
DSLPU 700 Signature Series
Brick, Paver & BlockWet or Dry
Brick, Clay, Concrete Pavers & Granite
Paver, Landscape Block, Brick, Block
Low Density Concrete Block Abrasive
Brick Paver
U Segment
U Segment
Brick PaverLandscape
Block Block
Block
U Segment
800.654.7224 phone • 800.256.3304 fax18
Size Part Number List Price6 X .100 PURPLE P6100 $116
8 X .100 PURPLE P8100 $168
10 X .100 PURPLE P10100 $245
12 X .120 PURPLE P12120 $297
13.5 X .120 PURPLE P135120 $335
13.5 X .250 PURPLE P135250 $695
Paver Blade14 X .120 PURPLE PV10014120 $386
Size Part Number List Price6 X .100 RED R6100 $116
8 X .100 RED R8100 $168
10 X .100 RED R10100 $245
12 X .120 RED R12120 $297
13.5 X .120 RED R135120 $335
13.5 X .250 RED R135250 $695
Paver Blade14 X .120 RED PV30014120 $386
Size Part Number List Price6 X .100 ORANGE O6100 $116
8 X .100 ORANGE O8100 $168
10 X .100 ORANGE O10100 $245
12 X .120 ORANGE O12120 $297
13.5 X .120 ORANGE O135120 $335
13.5 X .250 ORANGE O135250 $695
Paver Blade14 X .120 ORANGE PV40014120 $386
Fresh Cut 100% Compatible with Soff-Cut™ Saws
Purple Series Blades are designed for use on Very Hard Aggregates with non-abrasive sand.
Red Series Blades are designed for use on Medium to Hard Aggregates with medium abrasive sand.
Orange Series Blades are designed for use on Medium Aggregates with medium abrasive sand.
Early EntryGreen Concrete
19www.dixiediamond.com2016 Product Catalog
Size Part Number List Price6 X .100 YELLOW Y6100 $116
8 X .100 YELLOW Y8100 $168
10 X .100 YELLOW Y10100 $245
12 X .120 YELLOW Y12120 $297
13.5 X .120 YELLOW Y135120 $335
13.5 X .250 YELLOW Y135250 $695
Paver Blade14 X .120 YELLOW PV50014120 $386
Size Part Number List Price6 X .100 BLACK B6100 $116
8 X .100 BLACK B8100 $168
10 X .100 BLACK B10100 $245
12 X .120 BLACK B12120 $297
13.5 X .120 BLACK B135120 $335
13.5 X .250 BLACK B135250 $695
Paver Blade14 X .120 BLACK PV60014120 $386
Size Part Number List Price6” to 8” BLADES SKID6-8 $52
10” BLADES SKID10 $65
12” to 13.5” BLADES SKID12-14 $77
13.5" X .250" BLADES SKID135250 $77
14” BLADES SKID14 $82
Yellow Series Blades are designed for use on Medium Aggregates with medium abrasive sand.
Black Series Blades are designed for use on Soft Aggregates with abrasive sand.
Skid Plate - Special Arbor Knockout to ensure proper fit
*SOFF-CUT™ is a registered trademark of Soff-Cut International, Inc & Husqvarna Construction Product
Fresh Cut 100% Compatible with Soff-Cut™ Saws
Early EntryGreen Concrete
800.654.7224 phone • 800.256.3304 fax20
Cup Wheels
ECONOMY
SizePart Number Non-Threaded7/8” - 5/8”
Part Number Threaded5/8” - 11”
List Price
4” x 1 row ECG14 ECG14THRD $53
4” x 2 rows ECG24 ECG24THRD $64
7” x 1 row ECG17 ECG17THRD $113
7” x 2 rows ECG27 ECG27THRD $159
STANDARD
SizePart Number Non-Threaded7/8” - 5/8”
Part Number Threaded5/8” - 11”
List Price
4” x 1 row SCG14 SCG14THRD $106
4” x 2 rows SCG24 SCG24THRD $161
5” x 1 row SCG15 SCG15THRD $142
5” x 2 rows SCG25 SCG25THRD $184
7” x 1 row SCG17 SCG17THRD $185
7” x 2 rows SCG27 SCG27THRD $240
PREMIUM
SizePart Number Non-Threaded7/8” - 5/8”
Part Number Threaded5/8” - 11”
List Price
4” x 1 row DCG14 DCG14THRD $146
4” x 2 rows DCG24 DCG24THRD $214
7” x 1 row DCG17 DCG17THRD $240
7” x 2 rows x 7/8” - 5/8” DCG27 DCG27THRD $334
PREMIUM
SizePart Number Non-Threaded7/8” - 5/8”
Part Number Threaded5/8” - 11”
List Price
4” x 9 SEGS SPC49 SPC49THRD $140
4” x 18 SEGS SPC418 SPC418THRD $169
7” x 12 SEGS SPC712 SPC712THRD $182
7” x 24 SEGS SPC724 SPC724THRD $198
Segmented Cup Wheels
Spiral Cup Wheels
Non-Threaded
Threaded
21www.dixiediamond.com2016 Product Catalog
Turbo & Segmented Blades
Turbos are designed for use on circular saws and grinders to cut a wide range of material. Excellent for cutting hard materials including: concrete with wire mesh and smooth, chip-free cutting of various stone.
Small Segmented Blades are designed for use on circular saws and grinders to cut a wide range of material. Excellent for cutting concrete and masonry materials.
Turbo Blades
Segmented Blades
SizeEL TORO STANDARD PREMIUM
Part # List Price Part # List Price Part # List Price4” x .080” x 7/8” - 5/8” 4TURBO-2PK $46 TR4 $43 TP4 $76
4.5” x .080” x 7/8” - 5/8” 4.5TURBO-2PK $48 TR4.5 $58 TP4.5 $89
5” x .080” x 7/8” - 5/8” TR5 $65 TP5 $108
6” x .080” x 7/8” - 5/8” TR6 $76 TP6 $128
7” x .090” x DM7/8”-5/8” 7TURBO-2PK $98 TR7 $89 TP7 $155
8” x .090” x DM7/8”-5/8” TR8 $128 TP8 $193
9” x .090” x DM7/8”-5/8” TR9 $155 TP9 $222
10” x .090” x DM7/8”-5/8” TR10 $193 TP10 $254
12” x .110” x 1” TR12 $254 TP12 $382
14” x .110” x 1” TR14 $343 TP14 $472
SizeEL TORO STANDARD PREMIUM
Part # List Price Part # List Price Part # List Price4” x .080” x 7/8” - 5/8” 4SEG-2PK $46 SS4 $43 SR4 $74
4.5” x .080” x 7/8” - 5/8” 4.5SEG-2PK $48 SS4.5 $52 SR4.5 $87
5” x .080” x 7/8” - 5/8” SS5 $65 SR5 $104
6” x .080” x 7/8” - 5/8” SS6 $76 SR6 $129
7” x .090” x DM7/8”-5/8” 7SEG-2PK $98 SS7 $89 SR7 $156
8” x .090” x DM7/8”-5/8” SS8 $115 SR8 $203
9” x .090” x DM7/8”-5/8” SS9 $128 SR9 $228
10” x .090” x DM7/8”-5/8” SS10 $178 SR10 $252
2-PACK PRICE2-PACK PRICE
2-PACK PRICE2-PACK PRICE
800.654.7224 phone • 800.256.3304 fax22
Tuck Points Blades
Tuck Pointing Blades
Tuck Pointing Blades - Split Design
SizeBUDGET STANDARD PREMIUM
Part # List Price Part # List Price Part # List Price4” x .250” x 7/8” - 5/8” 4TUK $39 TUK104 $108 TUK204 $139
4” x .375” x 7/8” - 5/8” TUK204375 $230
4” x .500” x 7/8” - 5/8” TUK204500 $258
4.5” x .250” x 7/8” - 5/8” 4.5TUK $44 TUK104.5 $146 TUK204.5 $166
4.5” x .375” x 7/8” - 5/8” TUK204.5375 $251
5” x . 250” x 7/8” - 5/8” 5TUK $61 TUK105 $172 TUK205 $204
5” x .375” x 7/8” - 5/8” TUK205375 $294
7” x . 250” x 7/8” - 5/8” 7TUK $99 TUK107 $203 TUK207 $243
7” x .375” x 7/8” - 5/8” TUK207375 $437
8” x . 250” x 7/8” - 5/8” TUK108 $230 TUK208 $281
TUK10 and TUK20 blades are used to remove mortar from masonry joints using hand held tools. Choose your grade based on the size of your job and the frequency of use. TUK20 has better blade life.
TUK10S: Split Tuck Point blade is designed for the removal of old mortar in masonry joints using hand-held tools. The Split blade design allows for a much faster rate of removal providing for more productivity on the job.
Size Part Number List Price4” x .250” x 7/8-5/8” TUK10S TUK104S $82
4.5” x .250” x 7/8-5/8” TUK10S TUK104.5S $108
23www.dixiediamond.com2016 Product Catalog
Crack Chasers & Tile Saw Blades
• Use to widen cracks in concrete• Tapered segment• Available with 5/8”- 11 thread• Add “THRD” to part number
Size Part Number List Price4” x .375” x 7/8” - 5/8” CCS4375 $159
4” x .375” x 5/8” - 11” Thread CCS4375THRD $159
4” x .500” x 5/8” - 11” Thread CCS4500THRD $214
5” x .375” x 7/8” - 5/8” CCS5375 $237
7” x .375” x 7/8” - 5/8” CCS7375 $315
7” x .500” x 7/8” - 5/8” CCS7500 $362
8” x .375” x 7/8” - 5/8” CCS8375 $349
8” x .375” x 1” w/DP CCS8375-1DP $376
Crack Chasers
Smooth continious rims provide chip free cutting. Materials to cut with tile blades:
• Wall, Floor and Counter top tile• Ceramic • Porcelain • Glass• Natural Stone
Tile Saw Blades
SizeBUDGET STANDARD PREMIUM
Dry Wet Price Dry Wet Price Wet Price4” x .060” x 7/8” - 5/8” T604 T104 $38 T704 T204 $43 - -
4.5” x .060” x 7/8” - 5/8” T604.5 T104.5 $43 T704.5 T204.5 $52 - -
5” x .060” x 7/8” - 5/8” T605 T105 $46 T705 T205 $56 - -
6” x .060” x 5/8” T606 T106 $58 T706 T206 $65 T1006 $115
7” x .060” x 5/8” T607 T107 $76 T707 T207 $89 T1007 $128
8” x .060” x 5/8” T608 T108 $82 T708 T208 $96 T1008 $139
9” x .060” x 5/8” T609 T109 $87 T709 T209 $108 -
10” x .060” x 5/8” T6010 T1010 $96 T7010 T2010 $122 T10010 $178
12” x .080” x 1” T6012 T1012 $193 T7012 T2012 $230 T10012 $304
14” x .080” x 1” T6014 T1014 $243 T7014 T2014 $267 T10014 $350
800.654.7224 phone • 800.256.3304 fax24
DGC Dry Green Concrete
MP900 Wet Refractory
Tech Notes• Use DGC blades for early entry sawing when
concrete is less than 24 hours old.• Concrete less than 48 hours old generally cuts as
green concrete.• Concrete older than 48 hours generally cuts as
cured concrete.• Arbor is 1” with 7/8” and 5/8” adaptors on 7”, 8”, 9”
and 10” blades.
Specialty Blades
Size Part Number List Price7” x .100” x U/A DGC7 $258
8” x .100” x U/A DGC8 $278
9” x .100” x U/A DGC9 $297
10” x .110” x U/A DGC10110 $304
12” x .110” x U/A DGC12110 $393
12” x .125” x U/A DGC12125 $412
14” x .110” x 1”-20mm DGC14110 $456
14” x .125” x 1”-20mm DGC14125 $489
U/A = Universal Arbor 7” to 10”, 5/8” to 1”, 12” to 14”, 1” to 20mm
.350” Diamond Depth
Refractory brick are typically harder and denser than standard brick. They usually contain additives like alumina and silica to make them more resistant to heat and/or chemicals. These bricks are used in furnaces, chimneys, kilns, ovens, and places of high acidity.
Size Part Number List Price12” X .110” X U/A MP90012110 $390
14” X .110” X 1” MP90014110 $524
14” X .125” X 1” MP90014125 $550
18” X .125” X 1” MP90018125 $715
20” X .140” X 1” MP90020140 $902
24” X .155” X 1” MP90024155 $962
U/A = Universal Arbor 1” to 20mm
.350” Diamond Depth
25www.dixiediamond.com2016 Product Catalog
Item Description List PriceDGI 1 Grinding Shoe Insert $206
DGI6 6 Pack Grinding Shoe Inserts $1,067
CGH Grinding Heads
DGI Diamond Grinding Inserts
Specialty Products
Item Part Number List Price
Medium to Hard Concrete10 Segmented Head CGH10 $421
20 Segmented Head CGH20 $602
Abrasive Concrete, Green Concrete or Asphalt10 Segmented Head CGH10A $421
20 Segmented Head CGH20A $602
CGH - Diamond Concrete Grinding Heads are used for grinding concrete and finishes from floors. Hole pattern is designed to fit most floor grinding machines. 4 holes are 3/8” - 24 fine machine thread, and other 4 holes are 25/64” countersunk. Arbor is 3/4”.
The DGI Grinding Shoe Inserts are designed for replacement of the original shoes and bridges used on floor grinders. These inserts are for removing thin layers of coatings without clogging. Grinding Inserts can also be used for smoothing rough, uneven or patched slabs of concrete. Additional applications include leveling and feathering.
800.654.7224 phone • 800.256.3304 fax26
Core Bits and Equipment
27www.dixiediamond.com2016 Product Catalog
Core Bits and Equipment
800.654.7224 phone • 800.256.3304 fax28
Wet Core Bits
Beaver Bit Red
Nominal OD Coring Depth Part # List Price
2” 14 BV2000 $265
2-1/4” 14 BV2250 $284
2-1/2” 14 BV2500 $297
2-3/4” 14 BV2750 $339
3” 14 BV3000 $380
3-1/4” 14 BV3250 $414
3-1/2” 14 BV3500 $423
4” 14 BV4000 $469
4-1/4” 14 BV4250 $557
4-1/2” 14 BV4500 $608
4-3/4” 14 BV4750 $624
5” 14 BV5000 $663
5-1/2” 14 BV5500 $769
6” 14 BV6000 $800
6-1/2” 14 BV6500 $860
7” 14 BV7000 $1,079
8” 14 BV8000 $1,113
9” 14 BV9000 $1,353
10” 14 BV10000 $1,403
11” 14 BV11000 $1,472
12” 15 BV12000 $1,568
14” 17 BV14000 $1,933
15” 18 BV15000 $2,052
16” 18 BV16000 $2,141
.400” Diamond Depth
V GROOVE• Fast Drilling Due to Reduced Friction
and Surface Contact• More Power to the Tips• V-Groove Eliminates Bit Walking
During Hole Start• Fast Drilling Bond with Excellent Life• Hub Size 1-1/4” - 7”
29www.dixiediamond.com2016 Product Catalog
Wet Core Bits
Beaver Bit Green
Nominal OD Coring Depth Part # List Price
2” 14 BV2000-U $279
2-1/4” 14 BV2250-U $298
2-1/2” 14 BV2500-U $311
2-3/4” 14 BV2750-U $355
3” 14 BV3000-U $399
3-1/4” 14 BV3250-U $434
3-1/2” 14 BV3500-U $445
4” 14 BV4000-U $492
4-1/4” 14 BV4250-U $585
4-1/2” 14 BV4500-U $639
4-3/4” 14 BV4750-U $655
5” 14 BV5000-U $695
5-1/2” 14 BV5500-U $740
6” 14 BV6000-U $840
6-1/2” 14 BV6500-U $902
7” 14 BV7000-U $1,133
8” 14 BV8000-U $1,170
9” 14 BV9000-U $1,421
10” 14 BV10000-U $1,473
11” 14 BV11000-U $1,546
12” 15 BV12000-U $1,647
14” 17 BV14000-U $2,030
15” 18 BV15000-U $2,154
16” 18 BV16000-U $2,248
.400” Diamond Depth
U SEG• U-Shape Design Increases Coring Speed• Reduced Surface Contact Allows Fastest Drilling• V-Groove Eliminates Bit Walking During Hole Start• Great for Use With Hand Held Drills• Most Power to Tips• Hub Size 1-1/4” - 7”
800.654.7224 phone • 800.256.3304 fax30
Wet Core Bits
Nominal OD Coring Depth Part # List Price
2” 14 TB2000 $279
2-1/4” 14 TB2250 $298
2-1/2” 14 TB2500 $311
2-3/4” 14 TB2750 $355
3” 14 TB3000 $399
3-1/4” 14 TB3250 $434
3-1/2” 14 TB3500 $445
4” 14 TB4000 $492
4-1/4” 14 TB4250 $585
4-1/2” 14 TB4500 $639
4-3/4” 14 TB4750 $655
5” 14 TB5000 $695
5-1/2” 14 TB5500 $740
6” 14 TB6000 $840
6-1/2” 14 TB6500 $902
7” 14 TB7000 $1,133
8” 14 TB8000 $1,170
9” 14 TB9000 $1,421
10” 14 TB10000 $1,473
11” 14 TB11000 $1,546
12” 15 TB12000 $1,647
14” 17 TB14000 $2,030
15” 18 TB15000 $2,154
16” 18 TB16000 $2,248
.400” Diamond Depth
TURBO SEGMENT• Turbo Segment Reduces Drag• Fastest Coring Speeds of ANY BIT• Long Life Performance• Hub Size 1-1/4” - 7”
The Twister
31www.dixiediamond.com2016 Product Catalog
CBSP 3/4” to 1-1/2” bits have 5/8”-11 threads. To run these bits on core drill rigs with 1-1/4” - 7 threads you need to purchase the adaptor p# AD11/4 on page 35.
Dry Masonry Bits are designed for use on hand held core drill rigs and some hand drills. Use these bits for coring through BRICK and BLOCK walls only. Commonly used for conduit and other piping.
The BDX series bits use the ARIX™ Diamond Arrangement Technology to provide higher productivity and lower costs per hole.
5/8” - 11 Threaded9 inch drilling depth
Size Part Number List Price3/8" X 6" X 5/8"-11 Thread CBSP375 $146
1/2" x 5/8” - 11 Thread CBSP500 $148
5/8" x 5/8” - 11 Thread CBSP625 $149
3/4” x 5/8” - 11 Thread CBSP750 $151
7/8” x 5/8” - 11 Thread CBSP875 $157
1” x 5/8” - 11 Thread CBSP1000 $159
1-1/8” x 5/8” - 11 Thread CBSP1125 $175
1-1/4” x 5/8” - 11 Thread CBSP1250 $206
1-3/8” x 5/8” - 11 Thread CBSP1375 $208
1-1/2” x 5/8” - 11 Thread CBSP1500 $212
1-5/8” x 1-1/4” - 7 Thread CBSP1625 $248
1-3/4” x 1-1/4” - 7 Thread CBSP1750 $254
1-7/8” x 1-1/4” - 7 Thread CBSP1875 $262
CBSP - Wet Small Diameter Crown Core Bits
CBSP & Dry Masonry
Dry Masonry Bits
SizeBD BDX
Part Number
List Price
Part Number
List Price
1” BD1 $168 - -
1-1/4” BD11/4 $178 - -
1-1/2” BD11/2 $191 BDX11/2 $208
1-3/4” BD13/4 $201 BDX13/4 $220
2” BD2 $222 BDX2 $245
2-1/4” BD21/4 $227 BDX21/4 $250
2-1/2” BD21/2 $234 BDX21/2 $255
3” BD3 $287 BDX3 $315
3-1/2” BD31/2 $341 BDX31/2 $376
4” BD4 $356 BDX4 $392
4-1/2” BD41/2 $412 BDX41/2 $452
5” BD5 $452 BDX5 $497
6” BD6 $530 BDX6 $584
800.654.7224 phone • 800.256.3304 fax32
Wet Core Bits
BP Premium
Nominal OD Coring Depth Part # List Price
2” 14” BP210 $275
2-1/4” 14” BP21/410 $294
2-1/2” 14” BP21/210 $330
3” 14” BP310 $386
3-1/2” 14” BP31/210 $446
4” 14” BP410 $517
4-1/4” 14” BP41/410 $556
4-1/2” 14” BP410 $636
5” 14” BP510 $677
5-1/2” 14” BP51/210 $746
6” 14” BP610 $816
6-1/2” 14” BP61/210 $1,132
7” 14” BP710 $1,148
8” 14” BP810 $1,191
9” 14” BP910 $1,438
10” 14” BP1010 $1,450
12” 15” BP1210 $1,706
14” 17” BP1410 $2,083
16”* 18” BP1610 $2,379
18”* 20” BP1810 $2,701
20”* 22” BP2010 $2,951
24”* 22” BP2410 $3,726
.300” Diamond Depth
Hub Size2” - 24” = 1-1/4” - 7 Threaded
Extended Lengths In Stock!Call Factory for 26” & Above!*Note Spoke Back Hub Design
BOND SELECTION10: Hard aggregate/heavy rebar/faster speeds30: Abrasive materials (asphalt/green concrete)
33www.dixiediamond.com2016 Product Catalog
Wet Core Bits
Nominal OD Coring Depth Part # List Price
2” 14” BS210 $310
2-1/4” 14” BS21/410 $333
2-1/2” 14” BS21/210 $345
3” 14” BS310 $444
3-1/2” 14” BS31/210 $493
4” 14” BS410 $549
4-1/4” 14” BS41/410 $652
4-1/2” 14” BS410 $711
5” 14” BS510 $776
5-1/2” 14” BS51/210 $856
6” 14” BS610 $933
6-1/2” 14” BS61/210 $1,193
7” 14” BS710 $1,260
8” 14” BS810 $1,300
9” 14” BS910 $1,578
10” 14” BS1010 $1,640
12” 15” BS1210 $1,838
14” 17” BS1410 $2,246
16”* 18” BS1610 $2,495
18”* 20” BS1810 $2,903
20”* 22” BS2010 $3,199
24”* 22” BS2410 $3,929
.300” Diamond Depth
Hub Size2” - 24” = 1-1/4” - 7 Threaded
Extended Lengths In Stock!Call Factory for 26” & Above!*Note Spoke Back Hub Design
BOND SELECTION10: Hard aggregate/heavy rebar/faster speeds30: Abrasive materials (asphalt/green concrete)
BS Supreme
800.654.7224 phone • 800.256.3304 fax34
Extra Length Core Bit Tubes
Extra Length Core Bit Tubes
Bit Diameter X Hub Size Base List Price
Price/Inch Add to List Price
Max Length of Stock Tubing*
Small Diameter Core Bit Tubing1/2" X 5/8” - 11 Thread See Spec Page 31 $4 36"
5/8" X 5/8” - 11 Thread See Spec Page 31 $4 36"
3/4" X 5/8” - 11 Thread See Spec Page 31 $4 36"
7/8" X 5/8” - 11 Thread See Spec Page 31 $4 36"
1" X 5/8” - 11 Thread See Spec Page 31 $4 36"
1-1/8" X 5/8” - 11 Thread See Spec Page 31 $4 36"
1-1/4" X 5/8” - 11 Thread See Spec Page 31 $4 36"
1-3/8" X 5/8” - 11 Thread See Spec Page 31 $4 36"
1-1/2" X 5/8” - 11 Thread See Spec Page 31 $4 36"
1-5/8" X 1-1/4” - 7 Thread See Spec Page 31 $4 36"
1-3/4" X 1-1/4” - 7 Thread See Spec Page 31 $4 36"
1-7/8" X 1-1/4” - 7 Thread See Spec Page 31 $4 36"
Medium Diameter Core Bit Tubing2" X 1-1/4” - 7 Thread See Spec Pages 28-33 $4 36"
2-1/2" X 1-1/4” - 7 Thread See Spec Pages 28-33 $4 36"
3" X 1-1/4” - 7 Thread See Spec Pages 28-33 $5 36"
3-1/2" X 1-1/4” - 7 Thread See Spec Pages 28-33 $5 36"
4" X 1-1/4” - 7 Thread See Spec Pages 28-33 $5 36"
5" X 1-1/4” - 7 Thread See Spec Pages 28-33 $8 36"
6" X 1-1/4” - 7 Thread See Spec Pages 28-33 $9 36"
7" X 1-1/4” - 7 Thread See Spec Pages 28-33 $10 Call Factory
8" X 1-1/4” - 7 Thread See Spec Pages 28-33 $12 Call Factory
9" X 1-1/4” - 7 Thread See Spec Pages 28-33 $13 Call Factory
10" X 1-1/4” - 7 Thread See Spec Pages 28-33 $15 Call Factory
12" X 1-1/4” - 7 Thread See Spec Pages 28-33 $21 Call Factory
14" X 1-1/4” - 7 Thread See Spec Pages 28-33 $24 Call Factory
CUSTOM SIZED LARGE DIAMETER CORE BITSCore Bits over 14” in diameter are available in custom lengths. Please call
the factory to discuss your specific application.
35www.dixiediamond.com2016 Product Catalog
Core Bit Adapters & Extensions
Part Number
Core Bit Adapters & ExtensionsList
Price
EXT611/4 6” LONG EXTENSION 1-1/4” - 7 FEMALE TO 1-1/4”-7 MALE $68
ADJAC JACOB’S CHUCK ADAPTERS 5/8” - 11 MALE TO 1/2” SHANK $46
AD5/8 ADAPTER 5/8” - 11 FEMALE TO 1-1/4” - 7 MALE $68
EXT125/8 12” EXTENSION 5/8” - 11 FEMALE TO 5/8” - 11 MALE $62
AD11/4 ADAPTER 1-1/4” - 7 FEMALE TO 5/8” - 11 MALE $57
EXT65/8 6” EXTENSION 5/8” - 11 FEMALE TO 5/8” - 11 MALE $56
EXT1211/4 12” EXTENSION 1-1/4” - 7 FEMALE TO 1-1/4” - 7 MALE $79
Part Number
Core Bit Adapters & ExtensionsList
Price
AD5/8BI+ HILTI™ QUICK DISCONNECT MALE (6 SLOT) TO 5/8” - 11 MALE WITH BI+ CONNECTION $69
AD5/8BU HILTI™ QUICK DISCONNECT MALE (SPLINE) TO 5/8” - 11 MALE WITH BU CONNECTION $388
AD11/4BI+ HILTI™ QUICK DISCONNECT MALE (6 SLOT) TO 1-1/4” - 7 MALE WITH BI+ CONNECTION $86
AD11/4BU HILTI™ QUICK DISCONNECT MALE (SPLINE) TO 1-1/4” - 7 MALE WITH BU CONNECTION $490
AD11/4FS HILTI™ QUICK DISCONNECT MALE 1-1/4” – 7 TO FEMALE SPLINE $582
800.654.7224 phone • 800.256.3304 fax36
Hand Held Core Drills
• 1 Speed hand-held core drill
• Electronic Clutch
• 120 V, 50/60 Hz, 15 amp
• 1-1/4” male shaft with 5/8” adapter
• New! Built in GFI on cord
• Wet and dry drilling
• 5” core bit capacity
• Case included
• Idle RPM: 940
• Load RPM: 740
• 2 Speed hand-held core drill
• Electronic Clutch
• 120 V, 50/60 Hz, 15 amp
• 1-1/4” male shaft with 5/8” adapter
• New! Built in GFI on cord
• Wet and dry drilling
• 5” core bit capacity
• Case included
• Idle RPM: 1180/2150
• Load RPM: 930/1700
• 3 Speed hand-held core drill
• Electronic Clutch
• 120 V, 50/60 Hz, 15 amp
• 1-1/4” male shaft with 5/8” adapter
• New! Built in GFI on cord
• Wet and dry drilling
• 5” core bit capacity
• Case included
• Idle RPM: 770/1860/2580
• Load RPM: 570/1380/1920
Part# CARDITO-ELList Price: $1,300
Part# CARDITOL-EL
Part# CARDIT1M-EL
List Price: $1,400
List Price: $1,750
Electronic Cardi Single Speed Hand Held Core Drill
Electronic Cardi 2 Speed Hand Held Core Drill
Electronic Cardi 3 Speed Hand Held Core Drill
37www.dixiediamond.com2016 Product Catalog
Core Drill Stands
Part# CARDI-L180List Price: $750
• Anchor Base• Aluminium Alloy• 45° Tilting Angle• 2” x 2” x 34” Column• 22” Bit Travel• Weight: 24 lbs.• 8” Max Drilling Diameter (With Spacer)
Cardi Hand Held Drill Stand
Part# CARDI-L160List Price: $700
• Anchor Base• Aluminium Alloy• 2” x 2” x 34” Column• 24” Bit Travel• Weight: 20 lbs.• 6” Max Drilling Diameter
Cardi Hand Held Drill Stand
800.654.7224 phone • 800.256.3304 fax38
Core Drilling
DMX20VE With Vacuum
General Specifications• Bit Capacity: 1/2” to 12”
(14” w/spacer)• Bit Feed: 27”• Motor Spindle: 1-1/4” - 7• Column: 3-1/2” x 3-1/2”
adjustable rack and pinion
• Size LxWxH: 20” x 14” x 36”
• Weight: 159 lbs.
Features• Gast vacuum pump• Ceiling jack• Dual switch control panel• Amp meter• Leveling screws• Vacuum and anchor
combo base• Slide handle• 1 year warranty on parts
and labor
Drill Motor• Milwaukee 20 AMP• 110 Volt• Slip clutch• 450 / 900 RPM• Handy Carriage• Handle• Bubble Level
Part# DMX20VEList Price: $3,400
39www.dixiediamond.com2016 Product Catalog
Concrete Sawing
DDM13-18E - Walk Behind Saw
Part# DDM13-18EList Price: $2,600
Features• 13 Horsepower Honda Saw with 18” Guard• Heavy Duty, 7-Gauge Steel Frame• Heavy Duty Anti-Vibration Engine Mounts• Left or Right side Cutting• 3-Belt Drive for more Shaft Power• Heavy Duty Hinged Blade Guard• Premium non-slip rubber wheels• Weight - 254 lbs.
Options56305 Lifting Bale Assembly 56310 Water Tank Assembly
DDM13-18E - Walk Behind Saw
39www.dixiediamond.com2016 Product Catalog
HP10 - 18X.125HP10 - 18X.125Fre�Fre�
include�include�
800.654.7224 phone • 800.256.3304 fax40
DDM Promotions
Counter Top Display15” Wide X 15” Tall
DDM Part # COUNTERPrice $99
(Product Not Included)
Vinyl Banner48” Wide X 24” TallDDM Part # BANNERPrice $30
Counter Top Mat DDM Part #CTMAT
Price $20
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Size Part Number12” x .125” x 1”-20mm 12SEG
12” x .125” x 20mm 12SEG20
14” x .125” x 1”-20mm 14SEG
14” x .125” x 20mm 14SEG20
12mm Segment
Size Part Number12” x .110” x 1”-20mm DUAL12110
14” x .110” x 1”-20mm DUAL14110
14” x .125” x 1”-20mm DUAL14125
16” x .125” x 1”-20mm DUAL16125
.350” Diamond Depth
GOOD
BETTER
BEST
SINTERED SEGMENTS
LASER WELDED
LASER WELDED
Application Performance1 2 3 4 5 6 7 8 9 10
Cured Concrete
Brick & Pavers
Block
Asphalt
Green Concrete
Size Part Number12” x .110” x 1-20mm NCS12110
14” x .110” x 1-20mm NCS14110
14” x .125” x 1-20mm NCS14125
16” x .125” x 1-20mm NCS16125
.300 Diamond Depth
GOOD
DIXIEDIAMOND.COM
BETTER BEST
Diam. CoringDepth Part #
2” 14” BP210
2-1/4” 14” BP21/410
2-1/2” 14” BP21/210
3” 14” BP310
3-1/2” 14” BP31/210
4” 14” BP410
4-1/4” 14” BP41/410
4-1/2” 14” BP410
5” 14” BP510
5-1/2” 14” BP51/210
6” 14” BP610
6-1/2” 14” BP61/210
7” 14” BP710
8” 14” BP810
9” 14” BP910
10” 14” BP1010
12” 15” BP1210
14” 17” BP1410
Diam. CoringDepth
BV RedPart #
2” 14 BV2000
2-1/4” 14 BV2250
2-1/2” 14 BV2500
2-3/4” 14 BV2750
3” 14 BV3000
3-1/4” 14 BV3250
3-1/2” 14 BV3500
4” 14 BV4000
4-1/4” 14 BV4250
4-1/2” 14 BV4500
4-3/4” 14 BV4750
5” 14 BV5000
5-1/2” 14 BV5500
5-3/4” 14 BV5750
6” 14 BV6000
6-1/4” 14 BV6250
7” 14 BV7000
8” 14 BV8000
9” 14 BV9000
10” 14 BV10000
11” 14 BV11000
12” 15 BV12000
14” 17 BV14000
Diam. CoringDepth
BVU GreenPart #
2” 14 BV2000-U
2-1/4” 14 BV2250-U
2-1/2” 14 BV2500-U
2-3/4” 14 BV2750-U
3” 14 BV3000-U
3-1/4” 14 BV3250-U
3-1/2” 14 BV3500-U
4” 14 BV4000-U
4-1/4” 14 BV4250-U
4-1/2” 14 BV4500-U
4-3/4” 14 BV4750-U
5” 14 BV5000-U
5-1/2” 14 BV5500-U
5-3/4” 14 BV5750-U
6” 14 BV6000-U
6-1/4” 14 BV6250-U
7” 14 BV7000-U
8” 14 BV8000-U
9” 14 BV9000-U
10” 14 BV10000-U
11” 14 BV11000-U
12” 15 BV12000-U
14” 17 BV14000-U
Wet Coring Cured Concrete
Diamond BladesCore Bits • Hand Tools
Cup Wheels • Equipment
A M E R I C A N M A D E Q U A L I T Y D I A M O N D P R O D U C T S S I N C E 1 9 6 9
Other Seasonal PromotionsSpring – Contractors Free Lunch • Summer – Baker’s Dozen Special
Fall – Gift Card • Winter – Show Special
41www.dixiediamond.com2016 Product Catalog
MAXIMUM BLADE CUTTING DEPTH
Blade Diameter Cutting Depth
Concrete Saw Blades
12” 3-3/4”
14” 4-3/4”
16” 5-3/4”
18” 6-3/4”
20” 7-3/4”
24” 9-3/4”
26” 10 3/4”
30” 12”
36” 15”
42” 18”
48” 20”
High-Speed Saw Blades12” 4”
14” 5”
16” 6”
Wall Saw Blades18” 6-1/2”
24” 9-1/2”
30” 11-1/2”
36” 14-1/2”
42” 17-3/4”
48” 20-3/4”
Masonry Saw Blades14” 5”
18” 7”
20” 8”
Concrete Saw Blades6” 1-3/4”
7” 2-1/4”
8” 2-3/4”
9” 3-1/4”
10” 3-3/4”
Hand Saw Blades4” 1”
4-1/2” 1-1/4”
5” 1-1/2”
7” 2-1/2”
8” 3”
Note: Diamond blade cutting depths listed above are approximate. Actual cutting depth
will vary with the exact blade diameter or saw type, or diameter of the blade collars
(flanges).
Technical Information
BLADE OPERATING SPEEDS
Diameter Recommended
Operating Speed (RPM)
Maximum Safe Operating Speed
(RPM)4” 9,072 15,000
4-1/2” 8,063 13,300
5” 7,257 12,000
6” 6,048 10,185
7” 5,184 8,730
8” 4,536 7,640
9” 4,032 6,790
10” 3,629 6,115
12” 3,024 5,095
12” HS (HIGH-SPEED) – 6,300
14” 2,592 4,365
14” HS (HIGH-SPEED) – 5,400
16” 2,268 3,820
16” HS (HIGH-SPEED) – 4,800
18” 2,016 3,395
20” 1,814 3,055
24” 1,512 2,550
26” 1,396 2,350
28” 1,296 2,185
30” 1,210 2,040
32” 1,134 1,910
36” 1,008 1,700
42” 864 1,455
48” 756 1,275
BIT OPERATING SPEEDS
Diameter Minimum (RPM)
IDEAL (RPM)
Maximum (RPM)
1” 2400 3200 4000
2” 1200 1600 2000
3” 800 1050 1300
4” 600 800 1000
5” 475 640 800
6” 400 530 665
7” 340 450 600
8” 300 400 500
10” 240 320 400
12” 200 265 330
14” 170 225 285
16” 150 200 250
18” 130 175 220
20” 120 160 200
24” 100 130 165
26” 90 125 150
30” 80 105 130
32” 75 100 125
34” 70 95 120
36” 65 85 110
40” 60 80 100
42” 55 75 95
800.654.7224 phone • 800.256.3304 fax42
Troubleshooting
Slow Cutting SpeedCause Usually occurs when a blade is used to cut
a material that is too hard for the segment. The hard material wears the exposed diamonds, but not the metal portion of the segment. The segment wears too slowly, no new diamonds are exposed, and you see slow cutting speed.
Solution Cut a soft, abrasive material until diamonds are well exposed. Try Asphalt, block, sandstone, or dried mortar. Choose the proper blade for the application.
Potential If this problem is allowed to continue, heat builds up and the blade begins to bounce leading to segment loss, core cracks and a very unsafe condition.
Core or Segment CracksCause Blade is too hard for material. Saw is in need of repair. Blade
mounted improperly. Overheating. Twisting while cutting or attempting to cut curves.
Solution Specify a softer bonded blade for the material. Check all bearings, belts, shaft and flanges. Check direction of blade travel. Follow guidelines for proper blade operation and cooling procedures.
Potential If this problem is allowed to continue it will result in segment loss and possible core destruction. This is an extremely dangerous situation. Do not continue to use the blade.
Wobbling/Warped BladeCause Blade is out of tension...the steel core is not straight.
Wrong size collars or mounted incorrectly. Blade allowed to overheat (bluish black marks). Blade run at at improper RPM.
Solution Return blade to factory for repair. Use the correct sized blade collars. Check flanges are smooth and tightfitting. Follow guidelines for proper blade operation and cooling procedures. Check RPM rating for blade and saw.
Potential If this problem is allowed to continue, heat builds up and the blade begins to bounce leading to segment loss, core cracks and a very unsafe condition. Produces poor quality cuts.
UndercuttingCause Steel core is worn faster than segments by abrasive material
being cut.
Solution Specify a blade with wear-retardant design. Increase water flow to flush cut.
Potential If this problem is allowed to continue, the core will wear out from under the segment and allow the segments to separate.
Short Blade LifeCause Usually occurs when a blade is used
to cut a material that is too soft and abrasive for the segment. The abrasive material wears the metal of the segment too fast, and you see short blade life.
Solution Specify the correct blade, choose a more wear resistant bond. Check water flow. Make sure blade is rated for the equipment used. Check saw is in good condition.
Potential If blade specification is not changed the problem will reoccur. Customer will not get the full life and efficiency of the diamond tool.
Note: Slow cutting and short blade life are common problems with diamond blades. It is very important to understand that the segment of the blade is designed to wear at a certain rate. That is one of the important factors that makes one blade different from another.
43www.dixiediamond.com2016 Product Catalog
Ordering, Terms & Warranty
DDM13-18E - Walk Behind Saw
DDM13-18E - Walk Behind Saw
DDM13-18E - Walk Behind Saw
Terms of Sale
Warranty
Ordering Information
• FREIGHT on blades is prepaid for UPS Ground Service on any diamond blade shipment that is $400 or greater. Freight on equipment is not prepaid. Shipping and handling charges will be prepaid and charged to the customer on the invoice. All Air Shipments will be billed to the customer on the invoice.
• MINIMUM ORDER - None
• TAXES apply to all product sales unless a tax exempt certificate is provided.
• PRICES in this catalog are list prices and are subject to change without notice. All prices are in US Dollars.
• ALL DIAMOND TOOLS ARE WARRANTED AGAINST MANUFACTURING DEFECTS FOR THE LIFE OF THE PRODUCT. Applicability of warranty will be determined ONLY after inspection by a qualified DDM representative. DDM may pro-rate any warranty claim based upon a fair percentage of tool life prior to failure. Any tool covered under warranty will be replaced or repaired at the discretion of DDM. Warranty items include labor, parts, and return service shipping via UPS Ground or best-way.
• RETURNED GOODS AUTHORIZATION (RGA) must be issued by a DDM customer service representative and must accompany all items returned to the factory. Please have the following information before you call for an RGA: type and size of tool, part number, serial number, equipment used, and material being cut.
• RESTOCKING FEES may apply to the return of any non-catalog item.
• PLACE ORDERS with your local distributor, a DDM sales representative, customer service representative, by phone, fax, or e-mail. If you need help selecting tools, DDM will be glad to help you specify the tools you need. You do not need specific item numbers when placing orders.
• DISTRIBUTION POLICY: Orders will be processed for customers with accounts in our system. DDM sales policy is to guide consumers to approved distributors whenever possible.
• ITEM NUMBERS identify the specific tool you are ordering. DDM item numbers are used during order entry, and appear on picking tickets, packing slips, and invoices. Examples of item numbers appear at the bottom of each page or are found with the prices of some product groups.
Dry Cutting Blades Ð Example Ð DSLP1814125 Wet Cutting Blades Ð Example Ð AP9018140
DSL P 18 14 125 A P 90 18 140
DrySegmentedLaser-welded
Grade GradeMaterialBond BondDiameter DiameterThickness Thickness
DSLP1814125 AP9018140
Dry CuttingSegmentedLaser-weldedPremium Grade
18 bond14” diameter.125” thickness
AsphaltPremium grade
90 bond18” diameter.140” thickness
800.654.7224 phone • 800.256.3304 fax44
205 Buxton Court • Lilburn, GA 30047
Phone: 770-921-2464 • Fax: 770-921-4370 Toll Free: 800-654-7224 • Toll Free Fax: 800-256-3304
www.dixiediamond.com
DDM has been making quality diamond tools from start to finish in Atlanta, GA since 1969.We are the largest American Owned diamond tool maker in the U.S.A.