Displacement Units - Louvres | Attenuators | Slot · PDF filedistribution unit for...

4
Displacement Units DU..ed2 DU.6a DISPLATEK ADU4 Specification: DISPLATEK ADU04 is a rectangular air distribution unit for displacement ventilla- tion. The armature has a rectangular duct connection with sleeve dimensions. The unit is fitted with diffusion nozzles which make it possible to change the geometry of the near zone. Th eunit is maintenance free and there is no risk of clogging. Materials & Finish: Internal and external parts are galvanised steel, nozzles are black plastic and face plate 1.5mm galvanised steel. Standard finish is RAL9010 white powder coat, other colours being available on request. Mounting: Floor mounting against wall. Duct connection from above or below. DISPLATEK ADU4 DISPLATEK ADU04

Transcript of Displacement Units - Louvres | Attenuators | Slot · PDF filedistribution unit for...

Dis

plac

emen

t Uni

ts

DU.�.ed2

DU.6a

DISPLATEK ADU4

Specification:DISPLATEK ADU04 is a rectangular air distribution unit for displacement ventilla-tion. The armature has a rectangular duct connection with sleeve dimensions.The unit is fitted with diffusion nozzles which make it possible to change the geometry of the near zone.Th eunit is maintenance free and there is no risk of clogging.

Materials & Finish:Internal and external parts are galvanised steel, nozzles are black plastic and face plate 1.5mm galvanised steel. Standard finish is RAL9010 white powder coat, other colours being available on request.

Mounting:Floor mounting against wall.Duct connection from above or below.

DISPLATEK ADU4

DISPLATEK ADU04

DU.6b

Dimensions AccessoriesDuct flashing CEAZ-1 with Telescope

Plinth CEAZ-2

WeightSize A B D H Weight

kg2010 300 300 200 980 12,0

2510 500 350 250 980 24,0

3115 800 500 315 �500 80,0

4015 800 600 400 �500 96,0

WeightSize B Weight kg/m

2010 300 8,0

2510 350 10,0

3115 500 15,0

40�5 600 16,0

DISPLATEK ADU04Technical Specification

Supplied separately

Dis

plac

emen

t Uni

ts

DU.�.ed2

DU.6c

a0,2 is the horizontal distance from the wall to where the maximum velocity has de-creased to 0.2m/s.b0,2 is the horizontal distance from the cen-tre of the unit parallel with the wall to where the maximum velocity has decreased to 0.2m/s.

Sound Pressure Level LA,dB(A)The sound pressure level is specified at room damping of 4dB, corresponding to the damping in a room with a room constant of 10m2 SABINE measured in the reverbera-tion field.

Example of Calculation:Air flow: 150l/s (540 m3/h)Size 2510 lies within the recommended field of application.

Near zone at -3K: a0,2 = 1,2m, b0,2 = 4,0m.Pressure loss: Pt = 16PaSound pressure level: LA = 24 dB(A)

Sound Power LevelSound Power Level LW(dB) = LA + KOK

Sound AttenuationSound attenuation L (dB) including end reflection

DISPLATEK ADU04Technical SpecificationNear zone a0,2, b0,2

KOK

Mean Frequency HZSize 125 250 500 1000 2000 4000 80002010 6 7 � -� -8 -17 -17

2510 9 7 4 -� -9 -21 -23

3115 �� 7 4 -2 -�0 -12 -�5

4015 �� 7 5 -2 -�� -9 -9

Mean Frequency HZSize 125 250 500 1000 2000 4000 80002010 6 � 4 5 3 4 4

2510 6 6 4 2 2 4 3

3115 6 5 3 3 4 4 5

4010 5 3 3 2 3 4 4

DU.6d

DISPLATEK ADU04Technical Specification

Table 1

Near zone measured at an undertemperature of -3K to a maximum terminal velocity of 0.20 m/s.Conversion to other terminal velocitties - see table 1 for -3K and -6K respectively

Large diffusion(factory setting)

Small diffusionTechnical data

Correction of Near Zone (a0,2, b0,2)

Undertemperature -3K -6KMaximum velocity (m/s) 0,20 0,25 0,30 0,35 0,40 0,20 0,25 0,30 0,35 0,40

Mean velocity (m/s) 0,10 0,12 0,15 0,17 0,20 0,10 0,12 0,15 0,17 0,20

Correction factor 1,0 0,8 0,7 0,6 0,5 1,2 1,0 0,8 0,7 0,6