DISK DAMPER UDD - Sugatsune · 2019. 8. 8. · 323 18005625267 (U.S.A. Only) DISK DAMPERS DISK...
1
LID SUPPORTS 323 1-800-562-5267 (U.S.A. Only) www.sugatsune.com DISK DAMPERS DISK DAMPER UDD UDD DISK DAMPER BRACKET UDD-BKT S o ft C l o s e MOUNTING PLATE DAMPER ASSEMBLY Cut-Out Dimension Cut-Out Dimension How to Install Spacer Damper Selection Door Side Fixed Side *1, *2 screws and Spacer are not included. Cross section drawing *Torque = Distance to the center of gravity x 1/2 x Door weight Spacer thickness (T) = Clearance mm + Door thickness mm - 2.7mm Application Example No. Part Name Material Finish ➀ Main Body ABS Plastic Light Grey ➁ Cover ➂ Screws Steel Nickel ➃ Mounting Plate ➄ Axis Zinc Item No. Material Finish UDD-BKT 304 Stainless Steel Plain Item No. Handing Torque (kgf·cm) Weight (g) Box Qty (pcs) UDD-S-L Left 5.1~10.2 ( 4.4~8.9 lbs·in ) 90 20 UDD-S-R Right UDD-M-L Left 10.2~20.4 ( 8.9~17.7 lbs·in ) UDD-M-R Right UDD-H-L Left 20.4~30.6 (17.7~26.6 lbs·in) UDD-H-R Right T: Door Thickness A B C D E 5 46 70 49 95 26 15 54 82 57 111 40 18 57 86 60 117 44 F G 1 3 2 4 3 5 • Disc-shaped damper gently closes lid without slamming shut. • Narrow profile for unobtrusive installation. • Suitable for food service environments. • Successfully passed 30,000 open/close private cycle test. • Operating temperature: 5~35 ˚C (41~95˚F) • Spacer and installation screws are not included, and vary with application. Please contact customer service for more information. • Bracket for disk damper UDD for upward-opening door. • Catch is needed for holding door in opened position (not included). • Use SDS-50G face plate for glass/acrylic door. • Stop required to prevent over rotation (not included).
Transcript of DISK DAMPER UDD - Sugatsune · 2019. 8. 8. · 323 18005625267 (U.S.A. Only) DISK DAMPERS DISK...
LID SU
PPOR
TS323
1-800-562-5267(U.S.A. Only)
www.sugatsune.com
DISK
DA
MPER
S
DISK DAMPER UDD
UDD DISK DAMPER BRACKET UDD-BKT
Soft Close
MOUNTING PLATE DAMPER ASSEMBLY Cut-Out Dimension
Cut-Out Dimension
How to Install Spacer Damper Selection
Door Side
Fixed Side
*1, *2 screws and Spacer are not included.
Cross section drawing
*Torque = Distance to the center of gravity x 1/2 x Door weight
Spacer thickness (T) = Clearance mm + Door thickness mm - 2.7mm
Application Example
No. Part Name Material Finish➀ Main Body
ABS Plastic Light Grey➁ Cover➂ Screws
SteelNickel
➃ Mounting Plate➄ Axis Zinc
Item No. Material FinishUDD-BKT 304 Stainless Steel Plain
Item No. Handing Torque (kgf·cm) Weight (g) Box Qty (pcs)UDD-S-L Left 5.1~10.2
( 4.4~8.9 lbs·in )
90 20
UDD-S-R RightUDD-M-L Left 10.2~20.4
( 8.9~17.7 lbs·in )UDD-M-R RightUDD-H-L Left 20.4~30.6
(17.7~26.6 lbs·in)UDD-H-R Right
T: Door Thickness A B C D E5 46 70 49 95 26
15 54 82 57 111 4018 57 86 60 117 44
F G1 32 43 5
• Disc-shaped damper gently closes lid without slamming shut.• Narrow profile for unobtrusive installation.• Suitable for food service environments.• Successfully passed 30,000 open/close private cycle test.• Operating temperature: 5~35 ˚C (41~95˚F)• Spacer and installation screws are not included, and vary with
application. Please contact customer service for more information.
• Bracket for disk damper UDD for upward-opening door.• Catch is needed for holding door in opened position (not
included).• Use SDS-50G face plate for glass/acrylic door.• Stop required to prevent over rotation (not included).
