Human Coronavirus

DISINFECTING HARD, NON-POROUS SURFACES The World Health Organization recently announced the novel Coronavirus, officially named COVID-19, as a pandemic. To ensure individuals in your facility remain healthy, thoroughly disinfect hard, non-porous surfaces, such as door knobs, hand rails, elevator buttons, light switches and tables, daily in high traffic areas.

Proper disinfection is achieved after following careful cleaning procedures. If surfaces are visibly soiled, State recommends using a detergent and water prior to disinfection. Additionally, any cleaning and disinfection solutions should be mixed fresh daily to avoid contamination or expiration. Personal protective equipment (PPE) must be worn while disinfecting these areas. This includes gloves and safety glasses.

The following State products can be used for disinfecting hard, non-porous surfaces when following these instructions.

For more information on COVID-19 refer to https://www.cdc.gov/coronavirus/2019-nCoV/summary.html

Triple Quick™ ∙ Proper PPE while using Triple Quick is gloves and safety glasses (and respirator if fogging) ∙ No dilution necessary. ∙ Hold container six to eight inches from surface to be treated. ∙ Spray area until it is covered with the solution. ∙ Allow surface to remain wet for 10 minutes. ∙ Let air dry.

Quick Defense™ Disinfectant Tabs ∙ PPE: Gloves, safety glasses. ∙ Dilute 2 tablets in 1 gallon of water. ∙ Apply solution with brush, spray device, sponge, cloth, or mop to wet all surfaces thoroughly. ∙ Allow surface to remain wet for 1 minutes. ∙ Remove excess product by wiping with brush, sponge, or cloth. ∙ Do not breathe spray mist.

Quick Defense™ NDC ∙ Proper PPE while using Quick Defense NDC is gloves and safety glasses (and respirator if fogging). ∙ Dilute 1 ounce per gallon of water. ∙ Apply solution with a trigger sprayer so as to wet all surfaces thoroughly. ∙ Allow to remain wet for 5 minutes. ∙ Remove excess liquid.

Human Coronavirus

NDC™ ∙ Proper PPE while using NDC is gloves and safety glasses (and respirator if fogging). ∙ Dilute 2 ounces per gallon of water. ∙ Apply solution with a trigger sprayer so as to wet all surfaces thoroughly. ∙ Allow to remain wet for 10 minutes. ∙ Remove excess liquid.

Ecolution® Disinfectant (US Only excluding California) ∙ Proper PPE while using Ecolution Disinfectant is gloves and safety glasses (and respirator if fogging). ∙ Dilute 2 ounces per gallon of water. ∙ Apply solution with a trigger sprayer or other mechanical sprayer devices. ∙ Treated surfaces must remain wet for 10 minutes. ∙ Let air dry.

F-362™ No Rinse (California and Canada Only) ∙ Proper PPE while using F-362 No Rinse is gloves and safety glasses (and respirator if fogging). ∙ Dilute 2 ounces per gallon of water. ∙ Apply solution with a trigger sprayer or other mechanical sprayer devices. ∙ Treated surfaces must remain wet for 10 minutes. ∙ Let air dry.

For more information on COVID-19 refer to https://www.cdc.gov/coronavirus/2019-nCoV/summary.html

Po2wer DC™ (Not available in Canada)∙ Proper PPE while using Po2wer DC is gloves, safety glasses.∙ Pre-clean heavily soiled areas.∙ Dilute 2 oz. per 5 gallons of water and apply to surface.∙ Allow surface to remain wet for 10 minutes.∙ Wipe dry with a clean cloth or allow to air dry.

02R04 LIT802592 © Copyright 2020 - State Industrial Products Corp.

State Industrial Products5915 Landerbrook DriveMayfield Heights, OH 44124To Order Call: 1-866-747-2229www.stateindustrial.com

Canada6935 Davand DriveMississauga, Ontario L5T 1L5To Order Call: 1-800-668-6513

Puerto RicoRoyal Industrial Park, Bldg “M”Local #5, Carr 869, km 1.5 Palmas Cataño, P.R. 00962To Order Call: 787-275-3185

Human Coronavirus

Note: Hard surfaces may also be disinfected using a fogging machine. Refer to “Disinfecting Hard and Soft Surfaces Using a Fogging Machine” for more details.

For more information on COVID-19 refer to https://www.cdc.gov/coronavirus/2019-nCoV/summary.html

Discover™ TRIf used as a spray:∙ PPE: gloves and safety glasses.∙ Hold container upright about six to eight inches from surface.∙ Spray area until thoroughly wet.∙ Allow surface to remain wet for 10 minutes.∙ Let air dry.

If used as a fogger:∙ Total release fogging is an adjunct or supplement to normal cleaning and disinfection∙ Proper PPE while using Discover TR is gloves and safety glasses∙ Use one can for each 6,000 cubic feet of unobstructed area∙ Place several layers of newspaper or pad on stand or table in the center of room.∙ Depress trigger, then place fogger on the stand or table.∙ Do not remain in the area during treatment.∙ Ventilate thoroughly before re-entry. * not to use in a space less than 100 cubic feet.

Discover™ ∙ PPE: Gloves, safety glasses.∙ Hold container upright about six to eight inches from surface.∙ Spray area until thoroughly wet.∙ Allow to remain wet for 10 minutes.∙ Let air dry.

FIX® PLUS ∙ PPE: Gloves, safety glasses.∙ Shake can before using.∙ Hold the can 6 to 8 inches from the surface.∙ Spray area until it is covered.∙ Allow surface to remain wet for 10 minutes.∙ Wipe off with a clean cloth, mop or sponge.