Disassembling Panasonic GU87 LCD mainboard

How to remove the LCD main board

Written By: Van

Disassembling Panasonic GU87 LCD main board Draft: 2018-02-25Guide ID: 3411 -

This document was generated on 2019-09-29 12:00:08 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

TOOLS:Tweezers (1)Tri-point Y0 Screwdriver (1)iFixit Opening Tools (1)

Disassembling Panasonic GU87 LCD main board Draft: 2018-02-25Guide ID: 3411 -

This document was generated on 2019-09-29 12:00:08 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 6

Step 1 — LCD Cover removal

Remove the four rubber screwcovers from encircled locations.

Using a #0 tri wing screwdriver,remove the screws previouslyhidden below the rubber covers.

If you have difficulties finding thisscrewdriver, it is commonly sold as aNintendo Gameboy/Wii screwdriver.

Step 2

Pry the case open using iPhone tool(as shown), fingernails, smallflathead screwdriver, etc.

Be mindful of location andmagnitude of applied force, so asnot to damage the case.

Disassembling Panasonic GU87 LCD main board Draft: 2018-02-25Guide ID: 3411 -

This document was generated on 2019-09-29 12:00:08 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 6

Step 3 — Minor-LCD

Unlock the minor LCD connector byapplying bilateral pressure withtweezers, as shown.

Step 4

Use fingernails to pry off minor LCDmount, as shown.

Remove the minor LCD

Disassembling Panasonic GU87 LCD main board Draft: 2018-02-25Guide ID: 3411 -

This document was generated on 2019-09-29 12:00:08 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 6

Step 5 — LCD main board

Unlock the LCD main boardconnectors shown in red boxes onthe picture .

Use tweezers as necessary.

Step 6

Place finger nails on the connectortab as shown.

Lift the connector tab up.

Disassembling Panasonic GU87 LCD main board Draft: 2018-02-25Guide ID: 3411 -

This document was generated on 2019-09-29 12:00:08 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 6

To reassemble your device, follow these instructions in reverse order.

Step 7

Pull/pivot the LCD main board asshown in order to remove.

Disassembling Panasonic GU87 LCD main board Draft: 2018-02-25Guide ID: 3411 -

This document was generated on 2019-09-29 12:00:08 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 6