Disassembling HP Deskjet F4480 Top Lid - the-eye.eu Guides/Disassembling HP Deskjet... ·...

5
Disassembling HP Deskjet F4480 Top Lid Removing the top cover of the printer is a prerequisite for most installations Written By: Tim Disassembling HP Deskjet F4480 Top Lid © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

Transcript of Disassembling HP Deskjet F4480 Top Lid - the-eye.eu Guides/Disassembling HP Deskjet... ·...

Page 1: Disassembling HP Deskjet F4480 Top Lid - the-eye.eu Guides/Disassembling HP Deskjet... · Disassembling HP Deskjet F4480 Top Lid Removing the top cover of the printer is a prerequisite

Disassembling HP Deskjet F4480 Top LidRemoving the top cover of the printer is a prerequisite for most installations

Written By: Tim

Disassembling HP Deskjet F4480 Top Lid

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

Page 2: Disassembling HP Deskjet F4480 Top Lid - the-eye.eu Guides/Disassembling HP Deskjet... · Disassembling HP Deskjet F4480 Top Lid Removing the top cover of the printer is a prerequisite

INTRODUCTION

In order to gain access to most of the internal components the top (or lid) of the printer must beremoved. This guide is intended as a prerequisite for other installations.

TOOLS:T10 Torx Screwdriver (1)

Disassembling HP Deskjet F4480 Top Lid

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5

Page 3: Disassembling HP Deskjet F4480 Top Lid - the-eye.eu Guides/Disassembling HP Deskjet... · Disassembling HP Deskjet F4480 Top Lid Removing the top cover of the printer is a prerequisite

Step 1 — Open front access panel

Open the front access panel byplacing your finger in the front slotand pulling gently.

Step 2 — Removing Top Lid

Open the protective lid that iscovering the glass. Press gentlyagainst the base of the panel toremove the lid from the rest of theprinter.

Disassembling HP Deskjet F4480 Top Lid

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5

Page 4: Disassembling HP Deskjet F4480 Top Lid - the-eye.eu Guides/Disassembling HP Deskjet... · Disassembling HP Deskjet F4480 Top Lid Removing the top cover of the printer is a prerequisite

Step 3

Remove the four 9mm T10 Torx screws on the top.

Step 4

Carefully lift the top panel off of the printer.

Do not tear or damage the two cables that connect the top lid to the motherboard.

Disassembling HP Deskjet F4480 Top Lid

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5

Page 5: Disassembling HP Deskjet F4480 Top Lid - the-eye.eu Guides/Disassembling HP Deskjet... · Disassembling HP Deskjet F4480 Top Lid Removing the top cover of the printer is a prerequisite

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2017-06-17 10:47:50 PM.

Step 5

Remove the two cables by gripping each one close to their connection ports on the motherboardand gently disconnecting them.

Disassembling HP Deskjet F4480 Top Lid

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5