Diplexer E11F05P82
4
The Andrew Solutions Diplexer features extremely low insertion loss and high power handling capability. These diplexers use high performance bandpass filters to provide extremely low insertion loss, high These diplexers use high performance bandpass filters to provide extremely low insertion loss, high isolation, and high power handling capability in a compact, rugged, weatherproof housing. Sealing isolation, and high power handling capability in a compact, rugged, weatherproof housing. Sealing gaskets provide protection from moisture ingress at all interfaces. gaskets provide protection from moisture ingress at all interfaces. Provision has been made to allow dc bypass on all ports. Alternative bypass versions are also available. Provision has been made to allow dc bypass on all ports. Alternative bypass versions are also available. The diplexer also allows the passthrough of AISG signals to enable its deployment in systems utilizing The diplexer also allows the passthrough of AISG signals to enable its deployment in systems utilizing remote electrical tilt (RET). remote electrical tilt (RET). l dc bypass all ports, other versions available dc bypass all ports, other versions available l Single or twin configurations available Single or twin configurations available l AISG signals compatible AISG signals compatible l Flexible mounting options Flexible mounting options l Excellent solution for site sharing Excellent solution for site sharing l Low passive intermodulation Low passive intermodulation l Very compact design Very compact design l Lightning protection Lightning protection OneBase® Diplexer Indoor/Outdoor 1800/2100 MHz Diplexer Combines signals from wireless systems operating in the 1710 Combines signals from wireless systems operating in the 1710–1880 MHz 1880 MHz bands with signals in the UMTS 1920 bands with signals in the UMTS 1920–2170 MHz bands onto a common 2170 MHz bands onto a common feeder cable. feeder cable. Product Brief Product Brief ©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope. or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013 Page 1 of 4 Page 1 of 4 June 27, 2013 June 27, 2013
-
Upload
tuan-tocdai -
Category
Documents
-
view
23 -
download
4
description
diplexer
Transcript of Diplexer E11F05P82
The Andrew Solutions Diplexer features extremely low insertion loss and high power handling capability. These diplexers use high performance bandpass filters to provide extremely low insertion loss, high These diplexers use high performance bandpass filters to provide extremely low insertion loss, high isolation, and high power handling capability in a compact, rugged, weatherproof housing. Sealing isolation, and high power handling capability in a compact, rugged, weatherproof housing. Sealing gaskets provide protection from moisture ingress at all interfaces. gaskets provide protection from moisture ingress at all interfaces. Provision has been made to allow dc bypass on all ports. Alternative bypass versions are also available. Provision has been made to allow dc bypass on all ports. Alternative bypass versions are also available. The diplexer also allows the passthrough of AISG signals to enable its deployment in systems utilizing The diplexer also allows the passthrough of AISG signals to enable its deployment in systems utilizing remote electrical tilt (RET). remote electrical tilt (RET). l dc bypass all ports, other versions availabledc bypass all ports, other versions available l Single or twin configurations availableSingle or twin configurations available l AISG signals compatibleAISG signals compatible l Flexible mounting optionsFlexible mounting options l Excellent solution for site sharingExcellent solution for site sharing l Low passive intermodulationLow passive intermodulation l Very compact designVery compact design l Lightning protectionLightning protection
OneBase® Diplexer Indoor/Outdoor 1800/2100 MHz Diplexer Combines signals from wireless systems operating in the 1710Combines signals from wireless systems operating in the 1710––1880 MHz 1880 MHz bands with signals in the UMTS 1920bands with signals in the UMTS 1920––2170 MHz bands onto a common 2170 MHz bands onto a common feeder cable.feeder cable.
Product BriefProduct Brief
©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013
Page 1 of 4Page 1 of 4 June 27, 2013June 27, 2013
E11F05P82E11F05P82 OneBase™ Twin Diplexer, DCS 1800/UMTS 2100, AISG compatible, dc pass on all ports
Electrical Specifications dc Passthrough Band 1 | Band 2
3rd Order IMD Test Method Two +43 dBm carriers
3rd Order IMD, maximum 110 dBm
3rd Order IMD, typical 117 dBm
Isolation Between Paths, minimum 50.0 dB
Lightning Surge Current 3 kA
Lightning Surge Current Waveform 10/350 waveform
Electrical Specifications (Band 1) License Band DCS 1800
Operating Frequency Band 1710 – 1880 MHz
Insertion Loss, maximum 0.30 dB
Insertion Loss, typical 0.15 dB
Output Power, maximum composite 250 W
Return Loss at Frequency Band, minimum 18 dB @ 1710–1880 MHz
Return Loss at Frequency Band, typical 20 dB @ 1710–1880 MHz
Electrical Specifications (Band 2) License Band UMTS
Operating Frequency Band 1920 – 2170 MHz
Insertion Loss, maximum 0.30 dB
Insertion Loss, typical 0.15 dB
Output Power, maximum composite 250 W
Return Loss at Frequency Band, minimum 18 dB @ 1920–2170 MHz
Return Loss at Frequency Band, typical 20 dB @ 1920–2170 MHz
Product SpecificationsProduct Specifications
©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013
Page 2 of 4Page 2 of 4 June 27, 2013June 27, 2013
Block Diagram
General Specifications Product Type Diplexer
Application Indoor | Outdoor
Includes Mounting hardware
Mechanical Specifications Color Gray
Connector Interface 716 DIN Female
Connector Interface Style Long neck
Mounting Pipe Diameter 40–160 mm
Mounting Pipe Hardware Band clamps
Environmental Specifications Ingress Protection Test Method IEC 60529:2001, IP67
Operating Temperature 40 °C to +60 °C (40 °F to +140 °F)
Dimensions Depth 117.0 mm | 4.6 in
Height 149.0 mm | 5.9 in
Volume 2.5 L
Width 145.0 mm | 5.7 in
Weight, without mounting hardware 3.5 kg | 7.7 lb
Regulatory Compliance/CertificationsAgency Classification
Product SpecificationsProduct SpecificationsE11F05P82E11F05P82
©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013
Page 3 of 4Page 3 of 4 June 27, 2013June 27, 2013
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system
Product SpecificationsProduct SpecificationsE11F05P82E11F05P82
©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013
Page 4 of 4Page 4 of 4 June 27, 2013June 27, 2013
