Dimensions - KOBELCO · PDF filewear-resistant cutting edge. Blade cutting edge The frame...
Transcript of Dimensions - KOBELCO · PDF filewear-resistant cutting edge. Blade cutting edge The frame...
Type Machine Mass lbs (kg)Recommended bucket capacity cu ft (m³)Arm length ft-in (mm)Bucket Digging Force (SAE J1179) lbf (kN)Bucket Digging Force (ISO 7451) lbf (kN) Arm Crowding Force (SAE J1179) lbf (kN)Arm Crowding Force (ISO 7451) lbf (kN)
Combined flow,double action
2,417(16.669)
8.1(30.8)
4.6(17.5)
Specifications
・ ROPS / FOPS canopy・ Rubber track・ N&B piping・ Travel alarm・ 2-way pattern changer
STANDARD EQUIPMENT
SK17SRSK17SR-5E3,836(1,740)1.77(0.05)3'1"(950)
2,833(12.6)3,395(15.1)1,821(8.1)1,911(8.5)
GENERALMODEL
Model Type
Power Output SAE NET hp (kW)/rpm (Without Fan) hp (kW)/rpm
Max. Torque SAE NET lbf (N∙m)/rpm (Without Fan) lbf (N∙m)/rpmDisplacement cu in (L)Fuel Tank U.S. gal (L)
YANMAR 3TNV74F-SPBVTier4 water-cooled 4-cycle 3-cylinder
13.5(10.1)/2,50015.0(11.2)/2,50036.3(49.2)/1,80037.0(50.2)/1,800
61.0(1.0)5.2(20)
ENGINE
Pump Max. Discharge Flow U.S. gal (L)/minRelief Valve Setting psi (MPa)Hydraulic Oil Tank (system) U.S. gal (L)
Two variable displacement pumps+ two gear pump"(one for pilot pump)
2×4.6(17.6), 1×3.5(13.2), 1×2.6(11.2)2×20.6, 16.7×1, 2.9×1
4.3(16.5)(6.8(26))
Orbit motorHydraulic lock type2.7(4.3) / 1.3(2.1)
4,114(18.3)
HYDRAULIC SYSTEM
Shoe Width in (mm)Ground Pressure psi (kPa)
9(230)0.29
CRAWLER
Width x Height ft-in (mm)Working Ranges (height/depth) in (mm)
4'2"(1280) / 3'1"(950) ×9"(235)10"(260) / 8"(205)
DOZER BLADE
Swing Motor Parking Brake Swing Speed rpmTail Swing Radius ft-in (mm)Min. Front Over the front ft-in (mm)Swing Radius At full boom swing
Orbit motorHydraulic lock type
9.52'1"(640)
5'0"(1535)4'6''(1380)
SWING SYSTEM
Type
Offset Angle To the left degree To the right degree
Boom swing4265
MECHANISM
Travel Motors Parking Brake Travel speed (high/low) mph (km/h)Traction force lbf (kN)
TRAVEL SYSTEM
Hydraulic P.T.OSK17SR
PSI(Mpa)
2,200RPM 1,250RPM
US gal (L) / min
ModelOutput
Specifications
Unit:ft- in (mm)
ABCDEFGHIJK
L
MNOPQRS
SK17SR 7'3" (2,200)
7'7" (2,310)
6'1" (1,850)
12'2" (3,710)
11'4" (3,450)
5'0" (1,525)
12'1" (3,690)
8'8" (2,630)
5'0" (1,535)
7'7" (2,300)
10" (260)
3'1" (950)4'2" (1,280)
9" (230)
7" (175)
5" (125)
2'1" (640)
1'4" (400)
3" (85)
2'1" (R640)
Dimensions
Note: This catalog may contain attachments and optional equipment that are not available in your area. It may also contain photographs of machines withspecifications that differ from those of machines sold in your area. Please consult your nearest KOBELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.Copyright by KOBELCO CONSTRUCTION MACHINERY CO., LTD. No part of this catalog may be reproduced in any manner without notice.
22350 Merchants WayKaty, Texas 77449T: 281-888-8430F: 281-506-8713www.KOBELCO-USA.com/
The spring steel cylinder rod guard is standard for the bucket, boom and arm cylinder. The use of spring steel not only protects the cylinder rod, but gives resiliency to the guard itself.
Superior durability
Dozer cylinder rod guard protects dozer cylinder from damage.
Dozer cylinder rod guard
Back�ll dozer blade has wear-resistant cutting edge.
Blade cutting edge
The frame corners are reinforced with thick cast iron.The side cover has thicker plate for higher resilience.
Side frames protector
Durability
Work light is set under the boom to minimize potential damage during operation.
Boom light
Compact, Tough PerformerMini excavators are widely used at sites where space is limited, such as residential
areas and industrial operations. Users want big power in a small machine, stable
operation, rugged construction and
durability to reduce downtime. The SK17SR combines a compact design with long
digging reach for e�ciency, maneuverability and durability to ensure a long working
life.
1 2
Max. digging depth :
7 feet 3 inches (2,200 mm) Swing speed : 9.5 rpm
Compact
Performance
Tail swing radius overhang is 0 inches with the crawler s ide frames fully extended, so you can w o r k i n t i g h t p l a c e s safely and e�ciently.
Ultra-small rear swing design with zero overhang
During a right boom swing, the left front frame does not extend past the crawler shoes, so you can smoothly dig along walls.
Excellent side ditch digging along walls
The front minimum swing radius is a short four feet, six inches at full boom swing that allows for digging, swinging, and loading even in tight spots.
Digging depth of seven feet, three inches puts it at the top of its class.
Smaller front minimum swing radius
Digging depth at the top of its class
Powerful swing torque and top-class swing speed deliver shorter cycle times.
Reliable swing power, faster working speed
Straight Travel circuit allows you to drive in a line, even while operating the boom.
Straight Travel
Adapt to job conditions by changing the dozer blade width. The dozer blade wings fold in and out and are securely fastened with a retainer pin.
Easy change of dozer blade width
The hydraulic retractable side frames are strong and durable, as well as self cleaning. They retract to a narrow 37 inches for those tight areas and extend to a solid 50 inches for stability.
Self-cleaning retractable crawler frames
Dirt and Debris
Front overhang: 0 inches (During right boom swing)
37 inches (950mm)
50 inches (1,280mm)
Body does not extend past the crawler shoes.
Min. swing radius :
4 feet, 6 inches (1,535 mm)at right full boom swing
Tail overhang:
0 inches
43
Rear side
Left side
Maintenance
Engine oil �ller port
Front side
Comfort
Operator Safety
Raise the control lock lever to lock the attachment, rotate, swing the boom, and operate the machine. As an added precaution, the engine won't start with the lever raised.
Large travel pedals make operation easier and more comfortable.
Large travel pedals
Meets international protection standards for greater operator safety.
ROPS: Roll-over Protection SystemFOPS: Falling-object Protection System
ROPS/FOPS canopy
Pass-through operating station allows getting on and o� from either side.
The fuel �ller port is conveniently located in front of the right operating lever, making refueling easy.
Regular inspections are simple with the large, vertically-opening hood.
The cartridge return �lter is easily replaced without getting your hands dirty.
Open the cover below the operator's seat to easily perform maintenance on the battery, starter motor, and generator.
Pass-through operating station
Wrist rests �tted on each control boxensure comfortable operation.
Wrist rests
Control lock lever
Lift Point Height (r) Lift Radius.In. (mm)
78.7 (2,000)59.1 (1,500)39.4 (1,000)19.7 (500)Ground (0)-19.7 (-500)-39.4 (-1,000)
Max*749(340)*771(350)*804(365)*826(375)*859(390)*903(410)*925(420)
*705(320)*815(370)*992(450)
*1,157(525)*1,212(550)*1,201(545)
118.9 (3,020)127.1 (3,230)129.9 (3,300)130.3 (3,310)126.3 (3,210)119.6 (3,040)103.5 (2,630)
496(225)451(205)407(185)407(185)418(190)462(210)551(250)
*694(315)672(305)628(285)617(280)584(265)573(260)
118.9 (3,020)127.1 (3,230)131.1 (3,300)130.3 (3,310)126.3 (3,210)119.6 (3,040)103.5 (2,630)
518(235)473(215)440(200)440(200)451(205)496(225)584(265)
*694(315)*815(370)650(295)650(295)628(285)617(280)
118.9 (3,020)127.1 (3,230)131.1 (3,300)130.3 (3,310)126.3 (3,210)119.6 (3,040)103.5 (2,630)
98.5(2,500)
*936(425)*1,311(595)*1,631(740)*1,686(765)*1,620(735)*1,499(680)
78.7(2,000) Radius : in (mm) Max98.5(2,500)
*925(420)903(410)859(390)804(365)782(355)826(375)
78.7(2,000) Radius : in (mm) Max98.5(2,500)
*936(425)959(435)914(415)848(385)848(385)892(405)
78.7(2,000) Radius : in (mm)
(r) Lift Radius.In. (mm) (r) Lift Radius.In. (mm)
h:in (mm) Rated Lift Capacity Over EndBlade Down lbs (kg)
Rated Lift Capacity Over EndBlade Up lbs (kg)
Rated Lift Capacity Over SideBlade Up lbs (kg)
Lifting Capacity
Reach from swing center line : ft-in(mm)Lift point height : ft-in(mm)Lifting capacity : lbs(kg)
rhw
:::
Excavator equipped with ROPS/FOPS and rubber crawlers
: Rated over front : Rated over side
Do not attempt to lift or hold any load that is greater than these lift capacities at their speci�ed lift point radiusand heights. Weight of all accessories must be deducted from the above lift capacities.Lift capacities are based on machine standing on level, �rm, and uniform ground. User must make allowancefor job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads,hazardous conditions, experience of personnel, etc.Arm bucket pin is de�ned as lift point.The above lifting capacities are in compliance with SAE J/ISO 10567. They do not exceed 87 % of hydrauliclifting capacity or 75 % of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydrauliccapacity rather than tipping load.Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operatingthis machine. Rules for safe operation of equipment should be adhered to at all times.Lift capacities apply to only machines as normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
1.
2.
3.4.
5.
6.
r
h w
Water separator
Control lock lever
Air cleaner Radiator over�ow bottleFuel �lter
Fuel �ller port
Return �lter
Fuel tank
Radiator
Battery
Starter motor andGenerator
65