Refrigeration / Air-Conditioning · Refrigeration / Air-Conditioning ... 2
DimensionalDrawings TopMount Refrigeration System · Refrigeration System PublicationNo.509.2...
Transcript of DimensionalDrawings TopMount Refrigeration System · Refrigeration System PublicationNo.509.2...
Top MountRefrigerationSystemPublication No. 509.2March, 2009
Air Defrost — 2,500 - 13,500 BTUH
Electric Defrost — 2,400 - 9,000 BTUH
• All-in-one refrigeration system• Factory assembled• Fully charged and tested• Attached power cord onmost indoor models
• Quick and easy installation• Indoor and Outdoor units• HACCP compliant controls
Heat Transfer Products Group, LLC. htpgusa.com3050 Enterprise St., P.O. Box 1030, Brea, CA 92822-1030 • Tel: (714) 529-1935 • Fax: (714) 529-7203
Heat Transfer Products Group, LLC. htpgusa.com3050 Enterprise St., P.O. Box 1030, Brea, CA 92822-1030 • Tel: (714) 529-1935 • Fax: (714) 529-7203
Dimensional DrawingsSmall Cabinet Size - Indoor
Medium Cabinet Size - Indoor
Large Cabinet Size - Indoor
Medium - Outdoor
Large - Outdoor
NOTE: Due to continuing product development, specifications are to subject change without notice.
P/N
-122
3030
20re
v.02
02/0
9R-
2000
NOMENCLATUREX N 037 M A 44 - D E
MODEL - APEX
APPLICATIONM - Medium TempL - Low Temp
Approx. Capacity X 100
HOUSINGN - IndoorT - Outdoor
REFRIGERANT44 - R- 404A22 - R- 22
VOLTAGE CODEA - 115/1/60D - 208-230/1/60E - 208-230/3/60
DEFROST TYPEA - AirE - Electric
The APEX is delivered, fully assembled and ready to mount. Thissaves you time and money, because of itʼs quick installation andminimal labor cost. Most APEX units come with a 30” power cord soyou can just plug it in and chill.
Saving Time and Money• Two-year warranty on all parts• Shipped factory assembled and tested• No piping or loose components to install• Factory evacuated, charged and run tested• Motors and fans common to other HTPG product• Adjustable digital electrical controller preset
for typical cooler or freezer applications
Quick Installation• Installs in a fraction of the time it takes for a
typical split refrigeration system.• The supply/return register mounts flush
with a standard 4” ceiling panel which providesfor more storage in your cooler or freezer.
• Condensate evaporated on Indoor models so nodrain line is required.
• Drain line with heater provided for Outdoor models.
Replaceable heater and access panel
View from the inside of an installed walk-in cooler.
Standard Indoor Features:• Insulated evaporator housing / Mill finish Aluminum• Fully charged and run tested• Evaporative Drain pan (no drain line needed)• Electronic Controller• Filter / Drier, sight-glass, and TXV• “UL Sanitation” approved
Standard Outdoor Features:• Most features indentical to Indoor models*• All weather roof• Drain line with heater• Crankcase heater*Outdoor models not equipped with Evaporator Drain Pan
MOTOR CODEE - EC EVAP MTRP - PSC EVAP MTR
Performance / Electrical
NOMENCLATUREX N 037 M A 44 - D E
MODEL - APEX
APPLICATIONM - Medium TempL - Low Temp
Approx. Capacity X 100
HOUSINGN - IndoorT - Outdoor
REFRIGERANT44 - R- 404A22 - R- 22
VOLTAGE CODEA - 115/1/60D - 208-230/1/60E - 208-230/3/60
DEFROST TYPEA - AirE - Electric
The APEX is delivered, fully assembled and ready to mount. Thissaves you time and money, because of itʼs quick installation andminimal labor cost. Most APEX units come with a 30” power cord soyou can just plug it in and chill.
Saving Time and Money• Two-year warranty on all parts• Shipped factory assembled and tested• No piping or loose components to install• Factory evacuated, charged and run tested• Motors and fans common to other HTPG product• Adjustable digital electrical controller preset
for typical cooler or freezer applications
Quick Installation• Installs in a fraction of the time it takes for a
typical split refrigeration system.• The supply/return register mounts flush
with a standard 4” ceiling panel which providesfor more storage in your cooler or freezer.
• Condensate evaporated on Indoor models so nodrain line is required.
• Drain line with heater provided for Outdoor models.
Replaceable heater and access panel
View from the inside of an installed walk-in cooler.
Standard Indoor Features:• Insulated evaporator housing / Mill finish Aluminum• Fully charged and run tested• Evaporative Drain pan (no drain line needed)• Electronic Controller• Filter / Drier, sight-glass, and TXV• “UL Sanitation” approved
Standard Outdoor Features:• Most features indentical to Indoor models*• All weather roof• Drain line with heater• Crankcase heater*Outdoor models not equipped with Evaporator Drain Pan
MOTOR CODEE - EC EVAP MTRP - PSC EVAP MTR
Performance / Electrical
Top MountRefrigerationSystemPublication No. 509.2March, 2009
Air Defrost — 2,500 - 13,500 BTUH
Electric Defrost — 2,400 - 9,000 BTUH
• All-in-one refrigeration system• Factory assembled• Fully charged and tested• Attached power cord onmost indoor models
• Quick and easy installation• Indoor and Outdoor units• HACCP compliant controls
Heat Transfer Products Group, LLC. htpgusa.com3050 Enterprise St., P.O. Box 1030, Brea, CA 92822-1030 • Tel: (714) 529-1935 • Fax: (714) 529-7203
Heat Transfer Products Group, LLC. htpgusa.com3050 Enterprise St., P.O. Box 1030, Brea, CA 92822-1030 • Tel: (714) 529-1935 • Fax: (714) 529-7203
Dimensional DrawingsSmall Cabinet Size - Indoor
Medium Cabinet Size - Indoor
Large Cabinet Size - Indoor
Medium - Outdoor
Large - Outdoor
NOTE: Due to continuing product development, specifications are to subject change without notice.
P/N
-122
3030
20re
v.02
02/0
9R-
2000